TonBERRY/micropython
3
0
Fork 0
Code Pull Requests Activity

mimxrt/boards: Update deploy instructions.

Browse Source 
Make the final step of the deploy more detailed.

Signed-off-by: robert-hh <robert@hammelrath.com>
This commit is contained in:
robert-hh
2025-03-23 09:28:06 +01:00
committed by Damien George
parent cdcc70d4f8
commit 274c8c419c
4 changed files with 25 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
ports/mimxrt/boards/ADAFRUIT_METRO_M7/deploy_metro_m7.md
View File

@@ -8,4 +8,8 @@ here: https://learn.adafruit.com/adafruit-metro-m7-microsd/installing-the-bootlo
Once the bootloader is installed and started, you can install MicroPython Once the bootloader is installed and started, you can install MicroPython
by copying the .uf2 version of the firmware file to the bootloader by copying the .uf2 version of the firmware file to the bootloader
drive. When the firmware is installed, the drive will disappear. drive. A LED on the board will start flickering, indicating that the
upload is ongoing. Once the upload is complete, the drive icon will
disappear. Wait until the LED stops flickering. In rare cases there
may be an error message coming up, especially when there are only few
or no changes in the firmware file. Then just repeat the upload.

7
ports/mimxrt/boards/MAKERDIARY_RT1011_NANO_KIT/deploy_makerdiary.md
View File

@@ -31,4 +31,9 @@ sudo ./sdphost -u 0x1fc9,0x0145 -- jump-address 0x20207000
``` ```
Wait until a drive icon appears on the computer (or mount it explicitly). Wait until a drive icon appears on the computer (or mount it explicitly).
At this point the bootloader is installed. You can now copy the At this point the bootloader is installed. You can now copy the
MicroPython .uf2 file to the board. MicroPython .uf2 file to the board to start the firmware upload.
A LED on the board will start flickering, indicating that the
upload is ongoing. Once the upload is complete, the drive icon will
disappear. Wait until the LED stops flickering. In rare cases there
may be an error message coming up, especially when there are only few
or no changes in the firmware file. Then just repeat the upload.

12
ports/mimxrt/boards/OLIMEX_RT1010/deploy_olimex.md
View File

@@ -33,10 +33,16 @@ and you will not need it for Windows.
4. Once the upload of the bootloader is finished, push Reset twice. 4. Once the upload of the bootloader is finished, push Reset twice.
The bootloader should start and show a drive icon. Copy the .uf2 version of MicroPython The bootloader should start and show a drive icon.
to this drive to install or update MicroPython.
Once the UF2 bootloader is installed, only step 4 is required to deploy MicroPython. If 5. Copy the .uf2 version of MicroPython to this drive to install or update MicroPython.
A LED on the board will start flickering, indicating that the upload is ongoing. Once the upload
is complete, the drive icon will disappear. Wait until the LED stops flickering. In rare cases there
may be an error message coming up, especially when there are only few or no changes in
the firmware file. Then just repeat the copy.
Once the UF2 bootloader is installed, only steps 4 and 5 are required to deploy MicroPython. If
MicroPython is already installed, the bootloader can as well be invoked by calling MicroPython is already installed, the bootloader can as well be invoked by calling
`machine.bootloader()`. `machine.bootloader()`.

7
ports/mimxrt/boards/deploy_mimxrt.md
View File

@@ -41,5 +41,8 @@ installed.
If there is no valid Firmware on the device, the bootloader will start automatically. If there is no valid Firmware on the device, the bootloader will start automatically.
Once it's started, a drive ICON will appear. The MicroPython firmware file with .uf2 Once it's started, a drive ICON will appear. The MicroPython firmware file with .uf2
extension must then be copied to that drive. When the file is copied and MicroPython extension must then be copied to that drive. A LED on the board may start flickering,
is installed, the drive disappears and MicroPython starts. indicating that the upload is ongoing. Once the upload is complete, the drive icon
will disappear. Wait until the LED stops flickering. In rare cases there
may be an error message coming up, especially when there are only few or
no changes in the firmware file. Then just repeat the copy.