02620c2236
This is the minimum C interface to allow a modem driver to be built in Python. Interface is simple, with the intention that the micropython-lib driver is the main (only) consumer of it. Signed-off-by: Angus Gratton <angus@redyak.com.au>
397 B
397 B
| 1 | PA0 | |
|---|---|---|
| 2 | PA1 | |
| 3 | PA2 | |
| 4 | PA3 | |
| 5 | PA4 | |
| 6 | PA5 | |
| 7 | PA6 | |
| 8 | PA7 | |
| 9 | PA8 | |
| 10 | PA9 | |
| 11 | PA10 | |
| 12 | PA11 | |
| 13 | PA12 | |
| 14 | PA13 | |
| 15 | PA14 | |
| 16 | PA15 | |
| 17 | # in the default board configuration | PB0 must stay muxed to analog for HSE VDDTCXO function |
| 18 | -PB0 | |
| 19 | PB1 | |
| 20 | PB2 | |
| 21 | PB3 | |
| 22 | PB4 | |
| 23 | PB5 | |
| 24 | PB6 | |
| 25 | PB7 | |
| 26 | PB8 | |
| 27 | PB9 | |
| 28 | PB10 | |
| 29 | PB11 | |
| 30 | PB12 | |
| 31 | PB13 | |
| 32 | PB14 | |
| 33 | PB15 | |
| 34 | PC0 | |
| 35 | PC1 | |
| 36 | PC2 | |
| 37 | FE_CTRL3 | PC3 |
| 38 | FE_CTRL1 | PC4 |
| 39 | FE_CTRL2 | PC5 |
| 40 | PC6 | |
| 41 | SW | PA0 |
| 42 | SW1 | PA0 |
| 43 | SW2 | PA1 |
| 44 | SW3 | PC6 |
| 45 | LED_GREEN | PB9 |
| 46 | LED_RED | PB11 |
| 47 | LED_BLUE | PB15 |