When we don't use USB JTAG, we want to use the two USB pins (D+/D-) as
GPIO. So, do clear USB_SERIAL_JTAG_USB_PAD_ENABLE when USB SERIAL JTAG is
not enabled
Signed-off-by: Garry W <32130780+garywill@users.noreply.github.com>
Signed-off-by: Angus Gratton <angus@redyak.com.au>
The ESP32 PWM (LEDC) timer wasn't correctly stopped. `ledc_timer_rst()` is
for resetting the timer counter to zero, not for stopping the timer.
The correct way to stop a pwm timer is to pause it, then configure it with
`deconfigure = true`.
Signed-off-by: garywill <garywill@disroot.org>
This increases binary size by about 4KB on C3, probably a bit less on S2.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
These micros don't have full SDMMC host support, but they can initialise
the SDCard in SPI mode.
A bit limited on C3 and C6 as they only have one host SPI peripheral.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Previously ESP32-S3 SDMMC could only use fixed pin assignments, however the
ESP-IDF defaults don't match common boards. The chip also supports using
GPIO Matrix to assign any pin.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Reverts workaround added in acbdbcd9.
According to the linked ESP-IDF issue this was only a problem for ESP-IDF
V5.0.x, and support for versions older than V5.2 was dropped in 6e5d8d009.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Removes redundant metadata from each, shouldn't otherwise change
any build output.
Reverts the split originally added in e4650125.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Includes various fixes and improvements to the WLAN driver, in particular:
- Add WPA3 STA and AP support.
- Attempt to reconnect to AP in response to validation error.
- Update 43439 BT firmware for Data Length Extension fix.
Signed-off-by: Damien George <damien@micropython.org>
Simple `machine.Timer` implementation in-line with the rest of the
MicroPython ports.
Note: Only virtual timers are supported (not linked to any particular
hardware peripheral).
Tested with the nRF5340 and the nRF52840.
Signed-off-by: danicampora <danicampora@gmail.com>
Not enabled by default on any board. For a board to enable ROMFS it must:
- Add `#define MICROPY_VFS_ROM (1)` to its `mpconfigboard.h` file.
- Add a FLASH_ROMFS partition to the linker script and expose the partition
with:
_micropy_hw_romfs_start = ORIGIN(FLASH_ROMFS);
_micropy_hw_romfs_size = LENGTH(FLASH_ROMFS);
Signed-off-by: Damien George <damien@micropython.org>
Not enabled by default on any board. For a board to enable ROMFS it must:
- Add `#define MICROPY_VFS_ROM (1)` to its `mpconfigboard.h` file.
- Use `partitions-4MiB-romfs.csv` as its partitions file (or a similar
partitions definition that has an entry labelled "romfs").
Signed-off-by: Damien George <damien@micropython.org>
Not enabled by default on any board. A board can enable a ROMFS partition
by defining `MICROPY_HW_ROMFS_BYTES` in its `mpconfigboard.h` file. For
example:
#define MICROPY_HW_ROMFS_BYTES (128 * 1024)
The ROMFS partition is placed at the end of the flash allocated for the
firmware, giving less space for the firmware. It then lives between the
firmware and the read/write filesystem.
Signed-off-by: Damien George <damien@micropython.org>
This commit implements `vfs.rom_ioctl()` to query, erase and write both
internal and external flash, depending on how the board configures its
flash memory.
A board can configure ROM as follows.
To use internal flash memory:
#define MICROPY_HW_ROMFS_ENABLE_INTERNAL_FLASH (1)
To use external flash memory (QSPI memory mapped):
#define MICROPY_HW_ROMFS_ENABLE_EXTERNAL_QSPI (1)
#define MICROPY_HW_ROMFS_QSPI_SPIFLASH_OBJ (&spi_obj)
Then the partition must be defined as symbols in the linker script:
_micropy_hw_romfs_part1_start
_micropy_hw_romfs_part1_size
And finally the partition needs to be enabled:
#define MICROPY_HW_ROMFS_ENABLE_PART1 (1)
There's support for a second, optional partition via:
_micropy_hw_romfs_part2_start
_micropy_hw_romfs_part2_size
#define MICROPY_HW_ROMFS_ENABLE_PART1 (1)
Signed-off-by: Damien George <damien@micropython.org>
These commands use the `vfs.rom_ioctl()` function to manage the ROM
partitions on a device, and create and deploy ROMFS images.
Signed-off-by: Damien George <damien@micropython.org>
This function will attempt to create a `VfsRom` instance and mount it at
location "/rom" in the filesystem.
Signed-off-by: Damien George <damien@micropython.org>
This is a generic interface to allow querying and modifying the read-only
memory area of a device, if it has such an area.
Signed-off-by: Damien George <damien@micropython.org>
When writing to flash, the source buffer only needs to be read-only, not
writable. This fix allows passing in `bytes` and other read-only buffer
objects.
Signed-off-by: Damien George <damien@micropython.org>
This commit introduces the ability to obtain a list of stations
connected to the device when in soft-AP mode.
A new parameter ("stations") to pass to WLAN.status is supported,
returning a tuple of (bssid, ipv4) entries, one per connected station.
An empty tuple is returned if no stations are connected, and an
exception is raised if an error occurred whilst building the python
objects to return to the interpreter.
Documentation is also updated to cover the new parameter.
This fixes#5395.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
This allows running mpy-tool using MicroPython itself.
An appropriate test is added to CI to make sure it continues to work.
Signed-off-by: Volodymyr Shymanskyy <vshymanskyi@gmail.com>
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Simple implementation in-line with the rest of the MicroPython ports
Tested on the nRF52832 and the nRF5340.
Signed-off-by: danicampora <danicampora@gmail.com>
For a given MicroPython firmware/executable it can be sometimes important
to know how it was built, which variant/board configuration it came from.
This commit adds a new field `sys.implementation._build` that can help
identify the configuration that MicroPython was built with.
For now it's either:
* <VARIANT> for unix, webassembly and windows ports
* <BOARD>-<VARIANT> for microcontroller ports (the variant is optional)
In the future additional elements may be added to this string, separated by
a hyphen.
Resolves issue #16498.
Signed-off-by: Damien George <damien@micropython.org>
This won't be generated normally, but a failed run (for example, from a
unittest with an error or which doesn't call unittest.main()) will
generate one.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Changes are:
- Add the RX/TX pins to the table. In most cases these are the D0/D1 pins.
- Document the ability for the instantiation of the default devices without
submitting ID or pins.
- Improve the example script creating the pin list to show multiple name
assigments to the same pin.
- Fix errors in the pinout document.
Signed-off-by: robert-hh <robert@hammelrath.com>
In combination with the defautl Pins the default device can now be
instantiated e.g. as: uart = UART(). Similar for I2C and SPI.
Signed-off-by: robert-hh <robert@hammelrath.com>
If a board configures a default UART instance and/or TX/RX pins then the
user can create a default UART object using `machine.UART()`.
Signed-off-by: robert-hh <robert@hammelrath.com>
If a board configures a default SPI instance and/or SCK/MOSI/MISO pins,
then the user can create a default SPI object using `machine.SPI()`.
Also, if MISO is not going to be used, then MISO can be set to `None` with
`miso=None`.
Signed-off-by: robert-hh <robert@hammelrath.com>
If a board configures a default I2C instance and/or SCL/SDA pins, then
these no longer need to be given in the constructor. This allows the user
to easily construct the default I2C instance via `machine.I2C()` and that
will work on the default pins as designated on the board silkscreen.
Signed-off-by: robert-hh <robert@hammelrath.com>
This change allows tuples to be passed as the prefix/suffix argument to the
`str.startswith()` and `str.endswith()` methods. The methods will return
`True` if the string starts/ends with any of the prefixes/suffixes in the
tuple.
Also adds full support for the `start` and `end` arguments to both methods
for compatibility with CPython.
Tests have been updated for the new behaviour.
Signed-off-by: Glenn Moloney <glenn.moloney@gmail.com>
A new module called renesas is added, like in other ports. The accessible
block device allows to use Python methods for creating and modifying the
file system. The Flash block device for the file system can be accessed
with:
from renesas import Flash
bdev = Flash(start=0)
Signed-off-by: robert-hh <robert@hammelrath.com>
Tested with a generic ESP8266 device. The actual output value is taken
from the output register, not by reading the pad level.
Signed-off-by: robert-hh <robert@hammelrath.com>
The actual output pin value is taken from the OUT register, not from the
pad.
Tested with:
- ESP32 low and high Pin numbers
- ESP32C3 low Pin numbers
- ESP32C6 low Pin numbers
- ESP32S2 low and high Pin numbers
- ESP32S3 low and high Pin numbers
Signed-off-by: robert-hh <robert@hammelrath.com>
Particularly for out of tree builds, one may need to provide alternative or
extra linker fragment files, or specify an absolute path to the default
`linker.lf` file.
In the default case, do nothing, provide a plain `linker.lf`, as before.
Signed-off-by: Karl Palsson <karl.palsson@marel.com>
Changes:
- To add user to Linux dialout group, usermod is the universal Linux way.
adduser is Debian-based way.
- When installing IDF, we don't have to install all toolchains for all
chips.
- List currently supported chip models.
- Other minor typo and gramma corrections.
Signed-off-by: garywill <garywill@disroot.org>
Similar to the previous commit, this allows constructing an I2C instance
without specifying an ID. The default ID is I2C_NUM_0.
Signed-off-by: Malcolm McKellips <malcolm.mckellips@sparkfun.com>
This commit gives the option to not pass an I2C Bus ID when creating a
machine I2C object. If the ID is not provided, the default bus ID (which
is `PICO_DEFAULT_I2C`) is used.
This allows users to simply declare an I2C object with `machine.I2C()`
without passing any arguments, thus creating an object with the default I2C
ID, SCL, and SDA.
Signed-off-by: Malcolm McKellips <malcolm.mckellips@sparkfun.com>
