Avoids the new Wunterminated-string-literal when compiled with gcc 15.1.
It would be preferable to just disable this warning, but Clang
-Wunknown-warning-option kicks in even when disabling warnings so this
becomes fiddly to apply.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Avoids the new Wunterminated-string-literal when compiled with gcc 15.1.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Avoids the new Wunterminated-string-literal when compiled with gcc 15.1.
Also split out the duplicate string to a top-level array (probably the
duplicate string literal was interned, so unlikely to have any impact.)
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This brings in:
- requests: do not leak header modifications when calling request
- mip: allow relative URLs in package.json
- mip: make mip.install() skip /rom*/lib directories
- umqtt.simple: restore legacy ssl/ssl_params arguments
- nrf24l01: increase startup delay
- nrf24l01: properly handle timeout
- nrf24l01: optimize status reading
- lora-sx126x: fix invert_iq_rx / invert_iq_tx behaviour
- unix-ffi/json: accept both str and bytes as arg for json.loads()
- unix-ffi/machine: use libc if librt is not present
- requests: use the host in the redirect url, not the one in headers
- aiohttp: fix header case sensitivity
- aiohttp: allow headers to be passed to a WebSocketClient
- usb-device-cdc: optimise writing small data so it doesn't require alloc
- inspect: fix isgenerator logic
- inspect: implement iscoroutinefunction and iscoroutine
Signed-off-by: Damien George <damien@micropython.org>
Otherwise, when compiling on 16-bit systems (where `mp_uint_t` is 16 bits
wide) the compiler warns about "left shift count >= width of type", from
the static inline functions that have RV32_ENCODE_TYPE_xxx macros which
do a lot of bit shifting.
Signed-off-by: Damien George <damien@micropython.org>
Prior to this fix the following would fail:
$ make build-TEENSY40/flexram_config.s
because it didn't create the build directory before generating the file.
Also, make `hal/resethandler_MIMXRT10xx.S` have an explicit dependency on
`flexram_config.s` rather than the latter just being forced to be built
before everything else.
Signed-off-by: Damien George <damien@micropython.org>
There are some newer PYBD_SF6 being produced which have a larger flash,
namely two of 8MiB (instead of the older ones with two of 2MiB).
This commit adds support for these boards. The idea is to have the same
PYBD_SF6 firmware run on both old and new boards. That means autodetecting
the flash at start-up and configuring all the relevant SPI/QSPI parameters,
including for ROMFS and mboot.
Signed-off-by: Damien George <damien@micropython.org>
Allows `MICROPY_HW_QSPIFLASH_SIZE_BITS_LOG2` and
`MICROPY_HW_QSPI_MPU_REGION_SIZE` to be arbitrary expressions, eg function
calls.
The `storage.h` header needs to be included in case access to `spi_bdev_t`
is needed by the macros.
Signed-off-by: Damien George <damien@micropython.org>
Options for a board to configure ROMFS are:
- Leave ROMFS disabled, do nothing.
- Enable by defining `MICROPY_HW_ROMFS_ENABLE_PARTx` to 1 and then in the
linker script define `_micropy_hw_romfs_partX_start` and
`_micropy_hw_romfs_partX_size`.
- Enable by defining `MICROPY_HW_ROMFS_ENABLE_PARTx` to 1 and also define
`MICROPY_HW_ROMFS_PARTx_START` and `MICROPY_HW_ROMFS_PARTx_SIZE` which
can be arbitrary expressions (not necessarily static)
Signed-off-by: Damien George <damien@micropython.org>
This commit allows the user of this driver to intercept the SPI flash
initialisation routine and possibly take some action based on the JEDEC id,
for example change the `mp_spiflash_t::chip_params` element.
To do this, enable `MICROPY_HW_SPIFLASH_DETECT_DEVICE` and define a
function called `mp_spiflash_detect()`.
Signed-off-by: Damien George <damien@micropython.org>
This commit allows the user of this driver to dynamically configure the SPI
flash chip parameters. For this, enable `MICROPY_HW_SPIFLASH_CHIP_PARAMS`
and then set the `mp_spiflash_t::chip_params` element to point to a valid
`mp_spiflash_chip_params_t` struct.
Signed-off-by: Damien George <damien@micropython.org>
To match the instruction length, so the DFS is restored to the XIP value
after an erase or write (due to the final wait WIP).
Signed-off-by: Damien George <damien@micropython.org>
Now raises an exception if the pin doesn't support the alternate function
unit number and line type, eg UART0_TX (previously it only checked the
peripheral).
Signed-off-by: Damien George <damien@micropython.org>
Unlike HWSEM, the MHU IRQ can wake up cores from low-power modes, making it
better suited for notifying remote cores. Note that no special function is
required to wake up a remote core—the act of sending a message alone will
notify it.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
This channel can be used to communicate (pass messages) between the M55
cores in the RTSS. Currently it's only used to notify the cores.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
