Matthias Blankertz
4512b91763
All checks were successful
Build RPi Pico firmware image / Build-Firmware (push) Successful in 3m23s
Check code formatting / Check-C-Format (push) Successful in 7s
Check code formatting / Check-Python-Flake8 (push) Successful in 9s
Check code formatting / Check-Bash-Shellcheck (push) Successful in 5s
Run unit tests on host / Run-Unit-Tests (push) Successful in 8s
Run pytests / Check-Pytest (push) Successful in 11s
Signed-off-by: Matthias Blankertz <matthias@blankertz.org> Reviewed-on: #42 Reviewed-by: Stefan Kratochwil <kratochwil-la@gmx.de>
64 lines
1.4 KiB
Python
64 lines
1.4 KiB
Python
# SPDX-License-Identifier: MIT
|
|
# Copyright (c) 2025 Matthias Blankertz <matthias@blankertz.org>
|
|
|
|
import machine
|
|
from machine import Pin
|
|
|
|
# SD Card SPI
|
|
SD_DI = Pin.board.GP3
|
|
SD_DO = Pin.board.GP4
|
|
SD_SCK = Pin.board.GP2
|
|
SD_CS = Pin.board.GP5
|
|
SD_CLOCKRATE = 25000000
|
|
|
|
# MAX98357
|
|
I2S_LRCLK = Pin.board.GP6
|
|
I2S_DCLK = Pin.board.GP7
|
|
I2S_DIN = Pin.board.GP8
|
|
I2S_SD = Pin.board.GP9
|
|
|
|
# RC522
|
|
RC522_SPIID = 1
|
|
RC522_RST = Pin.board.GP14
|
|
RC522_IRQ = Pin.board.GP15
|
|
RC522_MOSI = Pin.board.GP11
|
|
RC522_MISO = Pin.board.GP12
|
|
RC522_SCK = Pin.board.GP10
|
|
RC522_SS = Pin.board.GP13
|
|
|
|
# WS2812
|
|
LED_DIN = Pin.board.GP16
|
|
LED_COUNT = 1
|
|
|
|
# Buttons
|
|
BUTTON_VOLUP = Pin.board.GP17
|
|
BUTTON_VOLDOWN = Pin.board.GP19
|
|
BUTTON_NEXT = Pin.board.GP18
|
|
BUTTON_POWER = Pin.board.GP21
|
|
|
|
# Power
|
|
POWER_EN = Pin.board.GP22
|
|
VBAT_ADC = Pin.board.GP26
|
|
|
|
|
|
def board_init():
|
|
# POWER_EN turned on in MICROPY_BOARD_STARTUP
|
|
# TODO: Implement soft power off
|
|
|
|
# SD_DO / MISO input doesn't need any special configuration
|
|
# Set 8 mA drive strength for SCK and MOSI
|
|
machine.mem32[0x4001c004 + 2*4] = 0x60 # SCK
|
|
machine.mem32[0x4001c004 + 3*4] = 0x60 # MOSI
|
|
# SD_CS doesn't need any special configuration
|
|
|
|
# Permanently enable amplifier
|
|
# TODO: Implement amplifier power management
|
|
I2S_SD.init(mode=Pin.OPEN_DRAIN)
|
|
I2S_SD.value(1)
|
|
|
|
|
|
def get_battery_voltage():
|
|
adc = machine.ADC(VBAT_ADC) # create ADC object on ADC pin
|
|
battv = adc.read_u16()/65535.0*3.3*2
|
|
return battv
|