Update for 2009.05-rc2

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

.gitignore

@@ -1,7 +1,8 @@
 /build_*
 /project_*
 /toolchain_*
-/binaries/*
+/binaries
+/dl
 /.auto.deps
 /.config.cmd
 /.config.old

CHANGES

@@ -1,3 +1,18 @@
+2009.05-rc2, Released May 19th, 2009:
+
+	Fixes for toolchain (gcc w/softfloat on ppc, 3.4.6 buildfix
+	for newer hosts), stable kernel versions, busybox, cups,
+	dmraid, docker, mesa3d, rsync and updated defconfigs.
+
+	xserver marked as broken on AVR32 and atngw100-expanded
+	config removed.
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#167: metacity does not build
+	#295: gamin installs python support even if python is disabled
+	#323: gen_matypes fails to execute during build of Mesa when us...
+
 2009.05-rc1, Released May 5th, 2009:
 
 	Fixes all over the tree, further conversion of packages to

COPYING

@@ -0,0 +1,339 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Lesser General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License along
+    with this program; if not, write to the Free Software Foundation, Inc.,
+    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.

Config.in

@@ -8,7 +8,7 @@ config BR2_HAVE_DOT_CONFIG
 
 config BR2_VERSION
 	string
-	default "2009.05-rc1"
+	default "2009.05-rc2"
 
 source "target/Config.in.arch"
 source "target/device/Config.in"

docs/U-boot.html

@@ -20,7 +20,6 @@
 	usage and documentation by Ulf Samuelsson.
 	</p>
 
-	<p><small>$LastChangedDate: 2008-12-16 10:00:11 +0100 (tis, 16 dec 2008) $</small></p>
 	<ul>
 		<li><a href="#about">About U-Boot</a></li>
 		<li><a href="#at91rm9200dk">Board Support for AT91RM9200DK</a></li>

docs/about.html

@@ -26,7 +26,8 @@ you do not need to be root to build or run Buildroot.
 Buildroot is maintained by <a href=
 "mailto:jacmet@uclibc.org">Peter Korsgaard</a>, and
 licensed under the
-<a href="http://www.gnu.org/copyleft/lgpl.html">GNU LIBRARY GENERAL PUBLIC LICENSE</a>.
+<a href="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html">GNU
+GENERAL PUBLIC LICENSE V2 (Or later)</a>.
 
 
 <!--#include file="footer.html" -->

docs/buildroot.html

@@ -19,8 +19,6 @@
     usage and documentation by Thomas Petazzoni. Contributions from
     Karsten Kruse, Ned Ludd, Martin Herren and others. </p>
 
-    <p><small>$LastChangedDate$</small></p>
-
     <ul>
 
       <li><a href="#about">About Buildroot</a></li>

docs/download.html

@@ -19,7 +19,7 @@ follow development, but cannot or do not wish to use Git.
 	<li> Click here to <a href="downloads/snapshots/">Daily Snapshots</a>.
 	</li>
 
-	<li> Click here to <a href="http://sources.busybox.net/index.py/trunk/buildroot/">browse the source tree</a>.
+	<li> Click here to <a href="http://git.buildroot.net/buildroot">browse the source tree</a>.
 	</li>
 
 	<li>Anonymous <a href="git.html">Git access</a> is available.

docs/news.html

@@ -6,6 +6,28 @@
 
 <ul>
 
+  <li><b>14 May 2009 -- Buildroot.org</b>
+
+    <p>Earl Levine has been so kind to donate the <b>buildroot.org</b>
+    domain to us, so the website can now also be reached at <a
+    href="http://www.buildroot.org">www.buildroot.org</a> (and git at
+    <a href="http://git.buildroot.org/buildroot">git.buildroot.org</a>).
+
+    Thanks a lot Earl!</p>
+
+  <li><b>5 May 2009 -- 2009.05-rc1 released</b>
+
+    <p>We have a new release candidate! Lots of changes all over the
+    tree, see the <a
+    href="http://git.buildroot.net/buildroot/plain/CHANGES?id=2009.05_rc1">CHANGES</a>
+    file for details.
+
+    <p>Head to the <a href="/downloads/">downloads page</a> to pick up the
+    <a href="/downloads/buildroot-2009.05-rc1.tar.bz2">2009.05-rc1
+    release candidate</a>, and report any problems found to the <a
+    href="lists.html">mailing list</a> or <a
+    href="http://bugs.uclibc.org">bug tracker</a>.</p>
+
   <li><b>3 May 2009 -- Moved to git</b>
 
     <p>We've moved the source code from <a

package/Config.in

@@ -328,15 +328,15 @@ config BR2_PACKAGE_XSERVER_none
 	bool "none"
 config BR2_PACKAGE_XSERVER_xorg
 	bool "modular xorg"
-	depends on BR2_USE_WCHAR && BR2_LARGEFILE # && BR2_ENABLE_LOCALE
+	depends on BR2_USE_WCHAR && BR2_LARGEFILE && BR2_INSTALL_LIBSTDCPP # && BR2_ENABLE_LOCALE
 # depending on BR2_ENABLE_LOCALE gives a recursion error with dbus
 config BR2_PACKAGE_XSERVER_tinyx
 	bool "tinyx"
 	depends on BR2_USE_WCHAR
 endchoice
 
-comment "xorg requires a toolchain with LOCALE, LARGEFILE and WCHAR support"
-	depends on !(BR2_USE_WCHAR && BR2_LARGEFILE && BR2_ENABLE_LOCALE)
+comment "xorg requires a toolchain with C++, LOCALE, LARGEFILE and WCHAR support"
+	depends on !(BR2_USE_WCHAR && BR2_LARGEFILE && BR2_INSTALL_LIBSTDCPP && BR2_ENABLE_LOCALE)
 comment "tinyx requires a toolchain with WCHAR support"
 	depends on !BR2_USE_WCHAR
 

package/busybox/busybox-1.14.0-awk.patch

@@ -0,0 +1,21 @@
+--- busybox-1.14.0/editors/awk.c	Tue Apr 14 01:43:09 2009
++++ busybox-1.14.0-awk/editors/awk.c	Mon May 18 23:49:29 2009
+@@ -1571,13 +1571,14 @@
+ 				n++; /* we saw yet another delimiter */
+ 			} else {
+ 				pmatch[0].rm_eo = l;
+-				if (s[l]) pmatch[0].rm_eo++;
++				if (s[l])
++					pmatch[0].rm_eo++;
+ 			}
+ 			memcpy(s1, s, l);
+ 			/* make sure we remove *all* of the separator chars */
+-			while (l < pmatch[0].rm_eo) {
+-				s1[l++] = '\0';
+-			}
++			do {
++				s1[l] = '\0';
++			} while (++l < pmatch[0].rm_eo);
+ 			nextword(&s1);
+ 			s += pmatch[0].rm_eo;
+ 		} while (*s);

package/busybox/busybox-1.14.0-depmod.patch

@@ -0,0 +1,90 @@
+--- busybox-1.14.0/modutils/depmod.c	Tue Apr 14 01:42:55 2009
++++ busybox-1.14.0-depmod/modutils/depmod.c	Mon May 18 22:37:14 2009
+@@ -40,26 +40,28 @@
+ 	ARG_r = (1<<6)  /* Compat dummy. Linux Makefile uses it */
+ };
+ 
+-static int FAST_FUNC parse_module(const char *fname, struct stat *sb,
+-				  void *data, int UNUSED_PARAM depth)
++static int FAST_FUNC parse_module(const char *fname, struct stat *sb UNUSED_PARAM,
++				  void *data, int depth UNUSED_PARAM)
+ {
++	char modname[MODULE_NAME_LEN];
+ 	module_info **first = (module_info **) data;
+ 	char *image, *ptr;
+ 	module_info *info;
+-	size_t len = sb->st_size;
++	/* Arbitrary. Was sb->st_size, but that breaks .gz etc */
++	size_t len = (64*1024*1024 - 4096);
+ 
+ 	if (strrstr(fname, ".ko") == NULL)
+ 		return TRUE;
+ 
+ 	image = xmalloc_open_zipped_read_close(fname, &len);
+-	info = xzalloc(sizeof(module_info));
++	info = xzalloc(sizeof(*info));
+ 
+ 	info->next = *first;
+ 	*first = info;
+ 
+ 	info->dnext = info->dprev = info;
+ 	info->name = xasprintf("/%s", fname);
+-	info->modname = filename2modname(fname, NULL);
++	info->modname = xstrdup(filename2modname(fname, modname));
+ 	for (ptr = image; ptr < image + len - 10; ptr++) {
+ 		if (strncmp(ptr, "depends=", 8) == 0) {
+ 			char *u;
+@@ -69,12 +71,14 @@
+ 				if (*u == '-')
+ 					*u = '_';
+ 			ptr += string_to_llist(ptr, &info->dependencies, ",");
+-		} else if (ENABLE_FEATURE_MODUTILS_ALIAS &&
+-			   strncmp(ptr, "alias=", 6) == 0) {
++		} else if (ENABLE_FEATURE_MODUTILS_ALIAS
++		 && strncmp(ptr, "alias=", 6) == 0
++		) {
+ 			llist_add_to(&info->aliases, xstrdup(ptr + 6));
+ 			ptr += strlen(ptr);
+-		} else if (ENABLE_FEATURE_MODUTILS_SYMBOLS &&
+-			   strncmp(ptr, "__ksymtab_", 10) == 0) {
++		} else if (ENABLE_FEATURE_MODUTILS_SYMBOLS
++		 && strncmp(ptr, "__ksymtab_", 10) == 0
++		) {
+ 			ptr += 10;
+ 			if (strncmp(ptr, "gpl", 3) == 0 ||
+ 			    strcmp(ptr, "strings") == 0)
+@@ -199,10 +203,17 @@
+ 	if (!(option_mask32 & ARG_n))
+ 		xfreopen_write("modules.alias", stdout);
+ 	for (m = modules; m != NULL; m = m->next) {
++		const char *fname = bb_basename(m->name);
++		int fnlen = strchrnul(fname, '.') - fname;
+ 		while (m->aliases) {
+-			printf("alias %s %s\n",
++			/* Last word can well be m->modname instead,
++			 * but depmod from module-init-tools 3.4
++			 * uses module basename, i.e., no s/-/_/g.
++			 * (pathname and .ko.* are still stripped)
++			 * Mimicking that... */
++			printf("alias %s %.*s\n",
+ 				(char*)llist_pop(&m->aliases),
+-				m->modname);
++				fnlen, fname);
+ 		}
+ 	}
+ #endif
+@@ -210,10 +221,12 @@
+ 	if (!(option_mask32 & ARG_n))
+ 		xfreopen_write("modules.symbols", stdout);
+ 	for (m = modules; m != NULL; m = m->next) {
++		const char *fname = bb_basename(m->name);
++		int fnlen = strchrnul(fname, '.') - fname;
+ 		while (m->symbols) {
+-			printf("alias symbol:%s %s\n",
++			printf("alias symbol:%s %.*s\n",
+ 				(char*)llist_pop(&m->symbols),
+-				m->modname);
++				fnlen, fname);
+ 		}
+ 	}
+ #endif

package/busybox/busybox-1.14.0-gzip.patch

@@ -0,0 +1,91 @@
+--- busybox-1.14.0/archival/gzip.c	Tue Apr 14 01:42:55 2009
++++ busybox-1.14.0-gzip/archival/gzip.c	Mon May 18 22:36:12 2009
+@@ -389,19 +389,6 @@
+ }
+ 
+ /* ===========================================================================
+- * Clear input and output buffers
+- */
+-static void clear_bufs(void)
+-{
+-	G1.outcnt = 0;
+-#ifdef DEBUG
+-	G1.insize = 0;
+-#endif
+-	G1.isize = 0;
+-}
+-
+-
+-/* ===========================================================================
+  * Run a set of bytes through the crc shift register.  If s is a NULL
+  * pointer, then initialize the crc shift register contents instead.
+  * Return the current crc in either case.
+@@ -2019,7 +2006,37 @@
+ {
+ 	struct stat s;
+ 
+-	clear_bufs();
++	/* Clear input and output buffers */
++	G1.outcnt = 0;
++#ifdef DEBUG
++	G1.insize = 0;
++#endif
++	G1.isize = 0;
++
++	/* Reinit G2.xxx */
++	memset(&G2, 0, sizeof(G2));
++	G2.l_desc.dyn_tree     = G2.dyn_ltree;
++	G2.l_desc.static_tree  = G2.static_ltree;
++	G2.l_desc.extra_bits   = extra_lbits;
++	G2.l_desc.extra_base   = LITERALS + 1;
++	G2.l_desc.elems        = L_CODES;
++	G2.l_desc.max_length   = MAX_BITS;
++	//G2.l_desc.max_code     = 0;
++	G2.d_desc.dyn_tree     = G2.dyn_dtree;
++	G2.d_desc.static_tree  = G2.static_dtree;
++	G2.d_desc.extra_bits   = extra_dbits;
++	//G2.d_desc.extra_base   = 0;
++	G2.d_desc.elems        = D_CODES;
++	G2.d_desc.max_length   = MAX_BITS;
++	//G2.d_desc.max_code     = 0;
++	G2.bl_desc.dyn_tree    = G2.bl_tree;
++	//G2.bl_desc.static_tree = NULL;
++	G2.bl_desc.extra_bits  = extra_blbits,
++	//G2.bl_desc.extra_base  = 0;
++	G2.bl_desc.elems       = BL_CODES;
++	G2.bl_desc.max_length  = MAX_BL_BITS;
++	//G2.bl_desc.max_code    = 0;
++
+ 	s.st_ctime = 0;
+ 	fstat(STDIN_FILENO, &s);
+ 	zip(s.st_ctime);
+@@ -2064,29 +2081,6 @@
+ 	SET_PTR_TO_GLOBALS(xzalloc(sizeof(struct globals) + sizeof(struct globals2))
+ 			+ sizeof(struct globals));
+ 	barrier();
+-	G2.l_desc.dyn_tree    = G2.dyn_ltree;
+-	G2.l_desc.static_tree = G2.static_ltree;
+-	G2.l_desc.extra_bits  = extra_lbits;
+-	G2.l_desc.extra_base  = LITERALS + 1;
+-	G2.l_desc.elems       = L_CODES;
+-	G2.l_desc.max_length  = MAX_BITS;
+-	//G2.l_desc.max_code    = 0;
+-
+-	G2.d_desc.dyn_tree    = G2.dyn_dtree;
+-	G2.d_desc.static_tree = G2.static_dtree;
+-	G2.d_desc.extra_bits  = extra_dbits;
+-	//G2.d_desc.extra_base  = 0;
+-	G2.d_desc.elems       = D_CODES;
+-	G2.d_desc.max_length  = MAX_BITS;
+-	//G2.d_desc.max_code    = 0;
+-
+-	G2.bl_desc.dyn_tree    = G2.bl_tree;
+-	//G2.bl_desc.static_tree = NULL;
+-	G2.bl_desc.extra_bits  = extra_blbits,
+-	//G2.bl_desc.extra_base  = 0;
+-	G2.bl_desc.elems       = BL_CODES;
+-	G2.bl_desc.max_length  = MAX_BL_BITS;
+-	//G2.bl_desc.max_code    = 0;
+ 
+ 	/* Allocate all global buffers (for DYN_ALLOC option) */
+ 	ALLOC(uch, G1.l_buf, INBUFSIZ);

package/busybox/busybox-1.14.0-libbb.patch

@@ -0,0 +1,35 @@
+--- busybox-1.14.0/include/libbb.h	Tue Apr 14 02:50:20 2009
++++ busybox-1.14.0-libbb/include/libbb.h	Fri May 15 23:22:02 2009
+@@ -965,6 +965,12 @@
+ 	/* How long the longest ESC sequence we know? */
+ 	KEYCODE_BUFFER_SIZE = 4
+ };
++/* Note: fd may be in blocking or non-blocking mode, both make sense.
++ * For one, less uses non-blocking mode.
++ * Only the first read syscall inside read_key may block indefinitely
++ * (unless fd is in non-blocking mode),
++ * subsequent reads will time out after a few milliseconds.
++ */
+ int read_key(int fd, smalluint *nbuffered, char *buffer) FAST_FUNC;
+ 
+ 
+--- busybox-1.14.0/libbb/read.c	Tue Apr 14 01:43:00 2009
++++ busybox-1.14.0-libbb/libbb/read.c	Fri May 15 23:22:02 2009
+@@ -229,7 +229,7 @@
+ 		if (size > 64*1024)
+ 			size = 64*1024;
+ 	}
+-	xrealloc(buf, total + 1);
++	buf = xrealloc(buf, total + 1);
+ 	buf[total] = '\0';
+ 
+ 	if (maxsz_p)
+@@ -273,7 +273,7 @@
+ 		free(buf);
+ 		return NULL;
+ 	}
+-	xrealloc(buf, size + 1);
++	buf = xrealloc(buf, size + 1);
+ 	buf[size] = '\0';
+ 
+ 	if (maxsz_p)

package/busybox/busybox-1.14.0-mdev.patch

@@ -1,5 +1,5 @@
 --- busybox-1.14.0/util-linux/mdev.c	Tue Apr 14 23:23:04 2009
-+++ busybox-1.14.0-mdev/util-linux/mdev.c	Sat May  2 16:31:34 2009
++++ busybox-1.14.0-mdev/util-linux/mdev.c	Mon May  4 19:58:47 2009
 @@ -181,7 +181,8 @@
  		 * the rest of fields unless keep_matching == 1 */
  
@@ -10,15 +10,3 @@
  
  		/* 3rd field: mode - device permissions */
  		mode = strtoul(tokens[2], NULL, 8);
-@@ -524,7 +525,10 @@
- 				make_device(temp, 1);
- 		}
- 		else if (strcmp(action, "add") == 0) {
--			make_device(temp, 0);
-+			/* N.B. make_device() mangles the device path, so save it */
-+			char *s = xstrdup(temp);
-+			make_device(s, 0);
-+			free(s);
- 			if (ENABLE_FEATURE_MDEV_LOAD_FIRMWARE) {
- 				if (fw)
- 					load_firmware(fw, temp);

package/busybox/busybox-1.14.0-sysctl.patch

@@ -0,0 +1,18 @@
+--- busybox-1.14.0/procps/sysctl.c	Tue Apr 14 01:43:09 2009
++++ busybox-1.14.0-sysctl/procps/sysctl.c	Sun May 10 23:40:52 2009
+@@ -214,11 +214,11 @@
+ // (but _whitespace_ from ends should be trimmed first (and we do it right))
+ //TODO: "var==1" is mishandled (must use "=1" as a value, but uses "1")
+ 	while (config_read(parser, token, 2, 2, "# \t=", PARSE_NORMAL)) {
++		char *tp;
+ 		sysctl_dots_to_slashes(token[0]);
+-		/* Save ~4 bytes by using parser internals */
+-		/* parser->line is big enough for sprintf */
+-		sprintf(parser->line, "%s=%s", token[0], token[1]);
+-		sysctl_act_recursive(parser->line);
++		tp = xasprintf("%s=%s", token[0], token[1]);
++		sysctl_act_recursive(tp);
++		free(tp);
+ 	}
+ 	if (ENABLE_FEATURE_CLEAN_UP)
+ 		config_close(parser);

package/busybox/busybox.mk

@@ -92,7 +92,7 @@ endif
 
 
 $(BUSYBOX_DIR)/busybox: $(BUSYBOX_DIR)/.config
-	$(MAKE) CC=$(TARGET_CC) CROSS_COMPILE="$(TARGET_CROSS)" \
+q	$(MAKE) CC=$(TARGET_CC) CROSS_COMPILE="$(TARGET_CROSS)" \
 		CROSS="$(TARGET_CROSS)" PREFIX="$(TARGET_DIR)" \
 		ARCH=$(KERNEL_ARCH) \
 		EXTRA_CFLAGS="$(TARGET_CFLAGS)" -C $(BUSYBOX_DIR)

package/cups/Config.in

@@ -4,3 +4,16 @@ config BR2_PACKAGE_CUPS
 	  The Common Unix Printing System
 
 	  http://www.cups.org
+
+if BR2_PACKAGE_CUPS
+
+config BR2_PACKAGE_CUPS_PDFTOPS
+       bool "pdftops support"
+       depends on BR2_INSTALL_LIBSTDCPP
+       help
+         Enable pdftops support
+
+comment "pdftops support requires a toolchain with C++ support enabled"
+	depends on !BR2_INSTALL_LIBSTDCPP
+
+endif

package/cups/cups-fix-stack-protector-check.patch

@@ -0,0 +1,25 @@
+[PATCH]: use AC_TRY_LINK for stack protector check
+
+Actually try to link an executable to test for stack protector support,
+as gcc seems to accept the -fstack-protector argument even when it's
+compiled with --disable-libssp (but linking fails with a error
+finding -lssp_nonshared).
+
+Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+---
+ config-scripts/cups-compiler.m4 |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+Index: cups-1.3.9/config-scripts/cups-compiler.m4
+===================================================================
+--- cups-1.3.9.orig/config-scripts/cups-compiler.m4
++++ cups-1.3.9/config-scripts/cups-compiler.m4
+@@ -109,7 +109,7 @@ if test -n "$GCC"; then
+ 	AC_MSG_CHECKING(if GCC supports -fstack-protector)
+ 	OLDCFLAGS="$CFLAGS"
+ 	CFLAGS="$CFLAGS -fstack-protector"
+-	AC_TRY_COMPILE(,,
++	AC_TRY_LINK(,,
+ 		OPTIM="$OPTIM -fstack-protector"
+ 		AC_MSG_RESULT(yes),
+ 		AC_MSG_RESULT(no))

package/cups/cups.mk

@@ -58,6 +58,12 @@ else
 	CUPS_CONF_OPT +=	--disable-python
 endif
 
+ifeq ($(BR2_PACKAGE_CUPS_PDFTOPS),y)
+	CUPS_CONF_OPT += --enable-pdftops
+else
+	CUPS_CONF_OPT += --disable-pdftops
+endif
+
 $(DL_DIR)/$(CUPS_SOURCE):
 	 $(call DOWNLOAD,$(CUPS_SITE),$(CUPS_SOURCE))
 
@@ -68,6 +74,7 @@ $(CUPS_DIR)/.unpacked: $(DL_DIR)/$(CUPS_SOURCE)
 	touch $@
 
 $(CUPS_DIR)/.configured: $(CUPS_DIR)/.unpacked
+	cd $(CUPS_DIR) && $(AUTOCONF)
 	(cd $(CUPS_DIR) && \
 		$(TARGET_CONFIGURE_OPTS) \
 		$(TARGET_CONFIGURE_ARGS) \
@@ -103,7 +110,7 @@ $(CUPS_DIR)/.installed: $(CUPS_DIR)/.compiled
 	$(SED) "s,^libdir=.*,libdir=\'$(STAGING_DIR)/usr/lib\',g" $(STAGING_DIR)/usr/bin/cups-config
 	touch $@
 
-cups: uclibc $(CUPS_DEPENDENCIES) $(CUPS_DIR)/.installed
+cups: uclibc host-autoconf $(CUPS_DEPENDENCIES) $(CUPS_DIR)/.installed
 
 cups-source: $(DL_DIR)/$(CUPS_SOURCE)
 

package/dmraid/dmraid.mk

@@ -7,6 +7,8 @@ DMRAID_VERSION:=1.0.0.rc15
 DMRAID_SOURCE:=dmraid-$(DMRAID_VERSION).tar.bz2
 DMRAID_SITE:=http://people.redhat.com/~heinzm/sw/dmraid/src
 DMRAID_SUBDIR:=$(DMRAID_VERSION)
+# lib and tools race with parallel make
+DMRAID_MAKE = $(MAKE1)
 DMRAID_DEPENDENCIES:=dm
 DMRAID_INSTALL_STAGING:=yes
 

package/docker/docker.mk

@@ -14,7 +14,7 @@ DOCKER_MAKE_OPT = CC=$(TARGET_CC) CXX=$(TARGET_CXX) LD=$(TARGET_LD) \
 					CFLAGS="-I$(STAGING_DIR)/usr/include \
 						-I$(STAGING_DIR)/usr/include/glib-2.0 \
 						-I$(STAGING_DIR)/usr/lib/glib-2.0/include" \
-					PKG_CONFIG="$(STAGING_DIR)/usr/bin/pkg-config" \
+					PKG_CONFIG="$(PKG_CONFIG_HOST_BINARY)" \
 					LDFLAGS="-L$(STAGING_DIR)/usr/lib -L$(STAGING_DIR)/lib"
 
 DOCKER_INSTALL_TARGET_OPT = PREFIX=$(TARGET_DIR)/usr install

package/gamin/gamin.mk

@@ -12,6 +12,10 @@ GAMIN_INSTALL_TARGET = YES
 
 GAMIN_CONF_OPT = --program-prefix="" --disable-debug
 
+ifneq ($(BR2_PACKAGE_PYTHON),y)
+GAMIN_CONF_OPT += --without-python
+endif
+
 GAMIN_INSTALL_TARGET_OPT = DESTDIR=$(TARGET_DIR) install
 
 GAMIN_CONF_ENV = have_abstract_sockets=no

package/metacity/metacity-nopo.patch

@@ -1,5 +1,13 @@
---- metacity-2.17.3/Makefile.am.orig	2007-01-14 16:50:52.000000000 -0700
-+++ metacity-2.17.3/Makefile.am	2007-01-14 16:51:46.000000000 -0700
+metacity: don't descent into po / docs subdirs
+---
+ Makefile.am |    2 +-
+ Makefile.in |    2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+Index: metacity-2.16.8/Makefile.am
+===================================================================
+--- metacity-2.16.8.orig/Makefile.am
++++ metacity-2.16.8/Makefile.am
 @@ -1,5 +1,5 @@
  
 -SUBDIRS=src po doc
@@ -7,12 +15,14 @@
  
  EXTRA_DIST=HACKING rationales.txt \
  	intltool-extract.in intltool-merge.in intltool-update.in
---- metacity-2.17.3/Makefile.in.orig	2007-01-14 16:51:38.000000000 -0700
-+++ metacity-2.17.3/Makefile.in	2007-01-14 16:51:58.000000000 -0700
-@@ -246,7 +246,7 @@
- sharedstatedir = @sharedstatedir@
- sysconfdir = @sysconfdir@
+Index: metacity-2.16.8/Makefile.in
+===================================================================
+--- metacity-2.16.8.orig/Makefile.in
++++ metacity-2.16.8/Makefile.in
+@@ -244,7 +244,7 @@ sysconfdir = @sysconfdir@
  target_alias = @target_alias@
+ top_builddir = @top_builddir@
+ top_srcdir = @top_srcdir@
 -SUBDIRS = src po doc
 +SUBDIRS = src
  EXTRA_DIST = HACKING rationales.txt \

package/metacity/metacity.mk

@@ -4,150 +4,22 @@
 #
 #############################################################
 
-# Seems to be broken -- topbar icons and such are misplaced etc
-#METACITY_VERSION:=2.17.5
+METACITY_VERSION = 2.16.8
+METACITY_SOURCE = metacity-$(METACITY_VERSION).tar.bz2
+METACITY_SITE = http://ftp.gnome.org/pub/gnome/sources/metacity/2.16
+METACITY_INSTALL_STAGING =NO
+METACITY_INSTALL_TARGET =YES
 
-METACITY_VERSION:=2.16.3
-METACITY_SOURCE:=metacity-$(METACITY_VERSION).tar.bz2
-METACITY_SITE:=http://ftp.gnome.org/pub/gnome/sources/metacity/2.16
-METACITY_DIR:=$(BUILD_DIR)/metacity-$(METACITY_VERSION)
-METACITY_CAT:=$(BZCAT)
-
-METACITY_SOURCE2:=MCity-Clearlooks2.tar.gz
-METACITY_CAT2:=$(ZCAT)
-METACITY_SITE2:=http://art.gnome.org/download/themes/metacity/1190
-
-$(DL_DIR)/$(METACITY_SOURCE):
-	 $(call DOWNLOAD,$(METACITY_SITE),$(METACITY_SOURCE))
-
-$(DL_DIR)/$(METACITY_SOURCE2):
-	 $(call DOWNLOAD,$(METACITY_SITE2),$(METACITY_SOURCE2))
-
-metacity-source: $(DL_DIR)/$(METACITY_SOURCE) $(DL_DIR)/$(METACITY_SOURCE2)
-
-$(METACITY_DIR)/.unpacked: $(DL_DIR)/$(METACITY_SOURCE) $(DL_DIR)/$(METACITY_SOURCE2)
-	$(METACITY_CAT) $(DL_DIR)/$(METACITY_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
-	toolchain/patch-kernel.sh $(METACITY_DIR) package/metacity/ \*.patch*
-	(cd $(METACITY_DIR); libtoolize --force;)
-	$(CONFIG_UPDATE) $(METACITY_DIR)
-	(cd $(METACITY_DIR); autoconf;)
-	touch $(METACITY_DIR)/.unpacked
-
-$(METACITY_DIR)/.configured: $(METACITY_DIR)/.unpacked
-	(cd $(METACITY_DIR); rm -rf config.cache; \
-		$(TARGET_CONFIGURE_OPTS) \
-		$(TARGET_CONFIGURE_ARGS) \
-		./configure \
-		GLIB_CONFIG=$(STAGING_DIR)/bin/glib-config \
-		ac_cv_func_posix_getpwuid_r=yes \
-		glib_cv_stack_grows=no \
-		glib_cv_uscore=no \
-		ac_cv_func_strtod=yes \
-		ac_fsusage_space=yes \
-		fu_cv_sys_stat_statfs2_bsize=yes \
-		ac_cv_func_closedir_void=no \
-		ac_cv_func_getloadavg=no \
-		ac_cv_lib_util_getloadavg=no \
-		ac_cv_lib_getloadavg_getloadavg=no \
-		ac_cv_func_getgroups=yes \
-		ac_cv_func_getgroups_works=yes \
-		ac_cv_func_chown_works=yes \
-		ac_cv_have_decl_euidaccess=no \
-		ac_cv_func_euidaccess=no \
-		ac_cv_have_decl_strnlen=yes \
-		ac_cv_func_strnlen_working=yes \
-		ac_cv_func_lstat_dereferences_slashed_symlink=yes \
-		ac_cv_func_lstat_empty_string_bug=no \
-		ac_cv_func_stat_empty_string_bug=no \
-		vb_cv_func_rename_trailing_slash_bug=no \
-		ac_cv_have_decl_nanosleep=yes \
-		jm_cv_func_nanosleep_works=yes \
-		gl_cv_func_working_utimes=yes \
-		ac_cv_func_utime_null=yes \
-		ac_cv_have_decl_strerror_r=yes \
-		ac_cv_func_strerror_r_char_p=no \
-		jm_cv_func_svid_putenv=yes \
-		ac_cv_func_getcwd_null=yes \
-		ac_cv_func_getdelim=yes \
-		ac_cv_func_mkstemp=yes \
-		utils_cv_func_mkstemp_limitations=no \
-		utils_cv_func_mkdir_trailing_slash_bug=no \
-		ac_cv_func_memcmp_working=yes \
-		ac_cv_have_decl_malloc=yes \
-		gl_cv_func_malloc_0_nonnull=yes \
-		ac_cv_func_malloc_0_nonnull=yes \
-		ac_cv_func_calloc_0_nonnull=yes \
-		ac_cv_func_realloc_0_nonnull=yes \
-		jm_cv_func_gettimeofday_clobber=no \
-		gl_cv_func_working_readdir=yes \
-		jm_ac_cv_func_link_follows_symlink=no \
-		utils_cv_localtime_cache=no \
-		ac_cv_struct_st_mtim_nsec=no \
-		gl_cv_func_tzset_clobber=no \
-		gl_cv_func_getcwd_null=yes \
-		gl_cv_func_getcwd_path_max=yes \
-		ac_cv_func_fnmatch_gnu=yes \
-		am_getline_needs_run_time_check=no \
-		am_cv_func_working_getline=yes \
-		gl_cv_func_mkdir_trailing_slash_bug=no \
-		gl_cv_func_mkstemp_limitations=no \
-		ac_cv_func_working_mktime=yes \
-		jm_cv_func_working_re_compile_pattern=yes \
-		ac_use_included_regex=no \
-		gl_cv_c_restrict=no \
-		--target=$(GNU_TARGET_NAME) \
-		--host=$(GNU_TARGET_NAME) \
-		--build=$(GNU_HOST_NAME) \
-		--prefix=/usr \
-		--exec_prefix=/ \
-		--libexecdir=/ \
-		--libdir=/lib \
-		--x-includes=$(STAGING_DIR)/usr/X11R6/include \
-		--x-libraries=$(STAGING_DIR)/usr/X11R6/lib \
-		--disable-glibtest \
-		--disable-gconf \
+METACITY_CONF_OPT = --x-includes=$(STAGING_DIR)/usr/include/X11 \
+		--x-libraries=$(STAGING_DIR)/usr/lib \
+		--disable-glibtest --disable-gconf \
 		--disable-dependency-tracking \
-		--disable-sm \
-		--disable-nls \
-		--disable-startup-notification \
-	)
-	touch $(METACITY_DIR)/.configured
+		--disable-sm --disable-startup-notification
 
-$(METACITY_DIR)/.compiled: $(METACITY_DIR)/.configured
-	$(MAKE) -C $(METACITY_DIR)
-	touch $(METACITY_DIR)/.compiled
+METACITY_DEPENDENCIES = uclibc libgtk2 $(XSERVER)
 
-$(STAGING_DIR)/lib/*metacity*.so: $(METACITY_DIR)/.compiled
-	$(MAKE) DESTDIR=$(STAGING_DIR) -C $(METACITY_DIR) install
-	touch -c $(STAGING_DIR)/lib/*metacity*.so
+$(eval $(call AUTOTARGETS,package,metacity))
 
-$(TARGET_DIR)/lib/*metacity*.so: $(STAGING_DIR)/lib/*metacity*.so
-	cp -dpf $(STAGING_DIR)/lib/*metacity*.so* $(TARGET_DIR)/lib/
-	-$(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $(TARGET_DIR)/lib/*metacity*.so
-	cp -dpf $(STAGING_DIR)/bin/*metacity* $(TARGET_DIR)/bin/
-	mkdir -p $(TARGET_DIR)/usr/share/metacity/icons
-	cp -dpf $(STAGING_DIR)/usr/share/metacity/icons/* $(TARGET_DIR)/usr/share/metacity/icons/
-	mkdir -p $(TARGET_DIR)/usr/share/themes
-	$(METACITY_CAT2) $(DL_DIR)/$(METACITY_SOURCE2) | \
-		tar -C $(STAGING_DIR)/usr/share/themes $(TAR_OPTIONS) -
-	cp -a $(STAGING_DIR)/usr/share/themes/Clearlooks \
-		$(TARGET_DIR)/usr/share/themes/
-	(cd $(TARGET_DIR)/usr/share/themes; rm -rf Atlanta; ln -s Clearlooks Atlanta)
+$(METACITY_HOOK_POST_INSTALL): $(METACITY_TARGET_INSTALL_TARGET)
 	install -D package/metacity/Xsession $(TARGET_DIR)/etc/X11/Xsession
-
-metacity: uclibc zlib $(XSERVER) libgtk2 $(TARGET_DIR)/lib/*metacity*.so
-
-metacity-clean:
-	-$(MAKE) -C $(METACITY_DIR) clean
-
-metacity-dirclean:
-	rm -rf $(METACITY_DIR)
-
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_PACKAGE_METACITY),y)
-TARGETS+=metacity
-endif
+	touch $@

package/rsync/rsync.mk

@@ -8,6 +8,7 @@ RSYNC_VERSION:=3.0.5
 RSYNC_SOURCE:=rsync-$(RSYNC_VERSION).tar.gz
 RSYNC_SITE:=http://rsync.samba.org/ftp/rsync/src
 RSYNC_AUTORECONF:=no
+RSYNC_USE_CONFIG_CACHE:=no
 RSYNC_INSTALL_STAGING:=NO
 RSYNC_INSTALL_TARGET:=YES
 ifeq ($(BR2_ENABLE_DEBUG),y)

package/x11r7/mesa3d/Config.in

@@ -8,6 +8,7 @@ config BR2_PACKAGE_MESA3D
 	select BR2_PACKAGE_XLIB_LIBXDAMAGE
 	select BR2_PACKAGE_LIBDRM
 	depends on BR2_PACKAGE_XSERVER_XORG_SERVER
+	depends on BR2_INSTALL_LIBSTDCPP
 	help
 	  Mesa 3D, an open-source implementation of the OpenGL specification.
 

package/x11r7/mesa3d/mesa3d-gen_matypes-fix.patch

@@ -0,0 +1,12 @@
+diff -ruN Mesa-7.2.orig/src/mesa/x86/Makefile Mesa-7.2/src/mesa/x86/Makefile
+--- Mesa-7.2.orig/src/mesa/x86/Makefile	2008-08-25 16:46:47.000000000 +0200
++++ Mesa-7.2/src/mesa/x86/Makefile	2009-05-08 08:46:34.000000000 +0200
+@@ -21,7 +21,7 @@
+ 
+ 
+ gen_matypes: gen_matypes.c
+-	$(CC) $(INCLUDE_DIRS) $(CFLAGS) gen_matypes.c -o gen_matypes
++	$(CC_FOR_BUILD) $(INCLUDE_DIRS) $(CFLAGS_FOR_BUILD) gen_matypes.c -o gen_matypes
+ 
+ # need some special rules here, unfortunately
+ matypes.h: ../main/mtypes.h ../tnl/t_context.h gen_matypes

package/x11r7/xserver_xorg-server/Config.in

@@ -49,10 +49,14 @@ config BR2_PACKAGE_XSERVER_XORG_SERVER
 	select BR2_PACKAGE_PIXMAN
 	select BR2_PACKAGE_XLIB_LIBXSCRNSAVER
 	select BR2_PACKAGE_MESA3D if BR2_PACKAGE_XSERVER_xorg
+	depends on !BR2_avr32
 	help
 	  xorg-server 1.4
 	  No description available
 
+comment "xorg-xserver is BROKEN on AVR32"
+	depends on BR2_avr32
+
 config BR2_PACKAGE_XSERVER_XORG_SERVER_NULL_CURSOR
     bool "Null root cursor"
     depends on BR2_PACKAGE_XSERVER_XORG_SERVER

target/device/Atmel/AVR32_Config.in

@@ -79,12 +79,4 @@ config BR2_TARGET_AVR32_ATNGW100_BASE
 	help
 	  Very simple configuration for the Atmel AVR32 Network Gateway Board.
 
-config BR2_TARGET_AVR32_ATNGW100_EXPANDED
-	bool "Atmel AVR32 expanded network gateway board support"
-	depends on BR2_TARGET_AT32AP7000
-	select BR2_PACKAGE_LINUX
-	help
-	  The Atmel AVR32 Network Gateway Board expanded to include
-	  audio, video, and PS/2.
-
 endchoice

target/device/Atmel/atngw100-base/atngw100-base_defconfig

@@ -1,9 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Fri Jul  4 12:05:11 2008
+# Tue May 12 20:24:27 2009
 #
 BR2_HAVE_DOT_CONFIG=y
-BR2_VERSION="0.10.0-svn"
+BR2_VERSION="2009.05-rc1"
 # BR2_alpha is not set
 # BR2_arm is not set
 # BR2_armeb is not set
@@ -16,15 +16,11 @@ BR2_avr32=y
 # BR2_mipsel is not set
 # BR2_nios2 is not set
 # BR2_powerpc is not set
-# BR2_s390 is not set
 # BR2_sh is not set
 # BR2_sh64 is not set
 # BR2_sparc is not set
 # BR2_sparc64 is not set
 # BR2_x86_64 is not set
-BR2_at32ap7000=y
-# BR2_at32ap7001 is not set
-# BR2_at32ap7002 is not set
 BR2_ARCH="avr32"
 BR2_ENDIAN="BIG"
 
@@ -42,24 +38,11 @@ BR2_BANNER="ATNGW100-BASE ($(DATE))"
 #
 # Preset Devices
 #
+# BR2_TARGET_AMD is not set
+BR2_BOARD_NAME="atngw100-base"
+BR2_BOARD_PATH="target/device/Atmel/$(BR2_BOARD_NAME)"
 BR2_TARGET_ATMEL=y
 
-#
-# Selection criteria
-#
-BR2_TARGET_ATMEL_NET=y
-BR2_TARGET_ATMEL_LCD=y
-# BR2_TARGET_ATMEL_FPDSP is not set
-# BR2_TARGET_ATMEL_MPB is not set
-
-#
-# Device Selection
-#
-
-#
-# Development Board Selection
-#
-
 #
 # Atmel AVR32 Specific Device Support
 #
@@ -67,15 +50,16 @@ BR2_TARGET_AVR32=y
 BR2_TARGET_AT32AP7000=y
 # BR2_TARGET_AT32AP7001 is not set
 # BR2_TARGET_AT32AP7002 is not set
+# BR2_TARGET_AT32AP7200 is not set
 
 #
 # Development board support
 #
 # BR2_TARGET_AVR32_ATSTK1002 is not set
+# BR2_TARGET_AVR32_ATSTK1005 is not set
 # BR2_TARGET_AVR32_ATNGW100 is not set
 BR2_TARGET_AVR32_ATNGW100_BASE=y
 # BR2_TARGET_AVR32_ATNGW100_EXPANDED is not set
-BR2_BOARD_NAME="atngw100-base"
 
 #
 # Package support
@@ -85,26 +69,21 @@ BR2_BOARD_NAME="atngw100-base"
 # Secondary locations
 #
 BR2_TARGET_ATMEL_COPYTO=""
-BR2_BOARD_PATH="target/device/Atmel/$(BR2_BOARD_NAME)"
-BR2_KERNEL_ARCH_PATCH_VERSION="2.6.24"
-BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-avr32/kernel-patches-$(BR2_KERNEL_ARCH_PATCH_VERSION)"
 # BR2_TARGET_VALKA is not set
 
-#
-# Generic Architecture support
-#
-
 #
 # Generic System Support
 #
 # BR2_TARGET_GENERIC_ACCESS_POINT is not set
 # BR2_TARGET_GENERIC_FIREWALL is not set
-# BR2_TARGET_GENERIC_DEV_SYSTEM is not set
+
+#
+# Generic development system requires a toolchain with WCHAR and PROGRAM_INVOCATION support
+#
 
 #
 # Build options
 #
-BR2_PRIMARY_SITE=""
 BR2_WGET="wget --passive-ftp --retry-connrefused --waitretry=10"
 BR2_SVN_CO="svn co"
 BR2_SVN_UP="svn up"
@@ -113,10 +92,13 @@ BR2_ZCAT="zcat"
 BR2_BZCAT="bzcat"
 BR2_TAR_OPTIONS=""
 BR2_DL_DIR="$(BASE_DIR)/dl"
+BR2_COPYTO=""
 
 #
 # Mirrors and Download locations
 #
+BR2_PRIMARY_SITE=""
+BR2_BACKUP_SITE="http://buildroot.net/downloads/sources/"
 BR2_SOURCEFORGE_MIRROR="easynews"
 BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
 BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
@@ -131,14 +113,13 @@ BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir"
 # BR2_FPU_SUFFIX is not set
 BR2_TOPDIR_PREFIX=""
 BR2_TOPDIR_SUFFIX=""
-BR2_ROOTFS_PREFIX="rootfs"
-BR2_ROOTFS_SUFFIX="$(DATE)"
 BR2_GNU_BUILD_SUFFIX="pc-linux-gnu"
 BR2_GNU_TARGET_SUFFIX="linux-uclibc"
 BR2_JLEVEL=1
 # BR2_PREFER_IMA is not set
 # BR2_DEPRECATED is not set
 BR2_RECENT=y
+# BR2_CONFIG_CACHE is not set
 # BR2_ENABLE_DEBUG is not set
 BR2_STRIP_strip=y
 # BR2_STRIP_sstrip is not set
@@ -151,6 +132,7 @@ BR2_OPTIMIZE_S=y
 # BR2_PREFER_STATIC_LIB is not set
 # BR2_HAVE_MANPAGES is not set
 # BR2_HAVE_INFOPAGES is not set
+# BR2_HAVE_DOCUMENTATION is not set
 # BR2_HAVE_DEVFILES is not set
 BR2_UPDATE_CONFIG=y
 
@@ -163,71 +145,69 @@ BR2_TOOLCHAIN_EXTERNAL_SOURCE=y
 BR2_TOOLCHAIN_SOURCE=y
 # BR2_TOOLCHAIN_ATMEL_AVR32_4_1_2 is not set
 # BR2_TOOLCHAIN_ATMEL_AVR32_4_2_1 is not set
-BR2_TOOLCHAIN_ATMEL_AVR32_4_2_2=y
-# BR2_TOOLCHAIN_ATMEL_AVR32_4_2_3_ENABLE is not set
+# BR2_TOOLCHAIN_ATMEL_AVR32_4_2_2 is not set
+BR2_TOOLCHAIN_ATMEL_AVR32_4_2_2_REV_2=y
 # BR2_TOOLCHAIN_ATMEL_AVR32_4_2_3 is not set
 # BR2_TOOLCHAIN_UNKNOWNVENDOR is not set
 BR2_TOOLCHAIN_ATMEL_AVR32=y
 BR2_VENDOR_SITE="$(BR2_ATMEL_MIRROR)"
 BR2_VENDOR_SUFFIX="-avr32"
-BR2_VENDOR_BINUTILS_RELEASE="-2.1.5"
-BR2_VENDOR_GCC_RELEASE="-2.1.5"
+BR2_VENDOR_BINUTILS_RELEASE="-1.0.1"
+BR2_VENDOR_GCC_RELEASE="-1.1.3"
 BR2_VENDOR_UCLIBC_RELEASE="-2.1.5"
 BR2_VENDOR_PATCH_DIR="Atmel/avr32"
 # BR2_EXT_GCC_VERSION_4_1_2 is not set
 # BR2_EXT_GCC_VERSION_4_2_1 is not set
 BR2_EXT_GCC_VERSION_4_2_2=y
 # BR2_EXT_GCC_VERSION_4_2_3 is not set
-BR2_EXT_BINUTILS_VERSION_2_17=y
-BR2_EXT_UCLIBC_VERSION_0_9_29=y
+# BR2_EXT_BINUTILS_VERSION_2_17 is not set
+BR2_EXT_BINUTILS_VERSION_2_18=y
 # BR2_EXT_UCLIBC_VERSION_0_9_28_3 is not set
+# BR2_EXT_UCLIBC_VERSION_0_9_29 is not set
+BR2_EXT_UCLIBC_VERSION_0_9_30=y
+# BR2_EXT_UCLIBC_VERSION_0_9_30_1 is not set
 
 #
 # Kernel Header Options
 #
-# BR2_KERNEL_HEADERS_2_4_25 is not set
-# BR2_KERNEL_HEADERS_2_4_27 is not set
-# BR2_KERNEL_HEADERS_2_4_29 is not set
-# BR2_KERNEL_HEADERS_2_4_31 is not set
-# BR2_KERNEL_HEADERS_2_6_9 is not set
-# BR2_KERNEL_HEADERS_2_6_11 is not set
-# BR2_KERNEL_HEADERS_2_6_12 is not set
-# BR2_KERNEL_HEADERS_2_6_20_4 is not set
-# BR2_KERNEL_HEADERS_2_6_20 is not set
-# BR2_KERNEL_HEADERS_2_6_21_5 is not set
-# BR2_KERNEL_HEADERS_2_6_21 is not set
-# BR2_KERNEL_HEADERS_2_6_22_1 is not set
-# BR2_KERNEL_HEADERS_2_6_22_10 is not set
-# BR2_KERNEL_HEADERS_2_6_22 is not set
 # BR2_KERNEL_HEADERS_2_6_23 is not set
-BR2_KERNEL_HEADERS_2_6_24=y
+# BR2_KERNEL_HEADERS_2_6_24 is not set
 # BR2_KERNEL_HEADERS_2_6_25 is not set
+# BR2_KERNEL_HEADERS_2_6_26 is not set
+# BR2_KERNEL_HEADERS_2_6_27 is not set
+# BR2_KERNEL_HEADERS_2_6_28 is not set
+BR2_KERNEL_HEADERS_2_6_29=y
 # BR2_KERNEL_HEADERS_SNAP is not set
-BR2_DEFAULT_KERNEL_HEADERS="2.6.24.7"
+BR2_DEFAULT_KERNEL_HEADERS="2.6.29.2"
 
 #
 # uClibc Options
 #
 # BR2_UCLIBC_VERSION_0_9_28_3 is not set
-BR2_UCLIBC_VERSION_0_9_29=y
+# BR2_UCLIBC_VERSION_0_9_29 is not set
+BR2_UCLIBC_VERSION_0_9_30=y
+# BR2_UCLIBC_VERSION_0_9_30_1 is not set
 # BR2_UCLIBC_VERSION_SNAPSHOT is not set
+BR2_UCLIBC_VERSION_STRING="0.9.30"
 BR2_UCLIBC_CONFIG="target/device/Atmel/uClibc.config.avr32"
-# BR2_ENABLE_LOCALE is not set
-# BR2_PTHREADS_NONE is not set
-# BR2_PTHREADS is not set
-BR2_PTHREADS_OLD=y
-# BR2_PTHREADS_NATIVE is not set
 # BR2_PTHREAD_DEBUG is not set
 # BR2_UCLIBC_PROGRAM_INVOCATION is not set
+# BR2_UCLIBC_INSTALL_TEST_SUITE is not set
 
 #
 # Binutils Options
 #
-BR2_BINUTILS_VERSION_2_17=y
+# BR2_BINUTILS_VERSION_2_17 is not set
 # BR2_BINUTILS_VERSION_2_17_50_0_17 is not set
-# BR2_BINUTILS_VERSION_2_18 is not set
+BR2_BINUTILS_VERSION_2_18=y
 # BR2_BINUTILS_VERSION_2_18_50_0_1 is not set
-BR2_BINUTILS_VERSION="2.17"
+# BR2_BINUTILS_VERSION_2_18_50_0_3 is not set
+# BR2_BINUTILS_VERSION_2_18_50_0_6 is not set
+# BR2_BINUTILS_VERSION_2_18_50_0_8 is not set
+# BR2_BINUTILS_VERSION_2_18_50_0_9 is not set
+# BR2_BINUTILS_VERSION_2_19 is not set
+# BR2_BINUTILS_VERSION_2_19_1 is not set
+BR2_BINUTILS_VERSION="2.18"
 BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""
 
 #
@@ -241,14 +221,15 @@ BR2_GCC_VERSION_4_2_2=y
 # BR2_GCC_VERSION_4_2_3 is not set
 # BR2_GCC_VERSION_4_2_4 is not set
 # BR2_GCC_VERSION_4_3_1 is not set
+# BR2_GCC_VERSION_4_3_2 is not set
+# BR2_GCC_VERSION_4_3_3 is not set
+# BR2_GCC_VERSION_4_4_X is not set
 BR2_GCC_SUPPORTS_SYSROOT=y
 # BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE is not set
 BR2_GCC_VERSION="4.2.2"
 # BR2_TOOLCHAIN_SYSROOT is not set
 # BR2_GCC_USE_SJLJ_EXCEPTIONS is not set
 BR2_EXTRA_GCC_CONFIG_OPTIONS=""
-BR2_GCC_CROSS_CXX=y
-# BR2_INSTALL_LIBSTDCPP is not set
 # BR2_GCC_SHARED_LIBGCC is not set
 
 #
@@ -266,42 +247,42 @@ BR2_GCC_CROSS_CXX=y
 #
 # Common Toolchain Options
 #
+BR2_LARGEFILE=y
+BR2_INET_IPV6=y
+BR2_INET_RPC=y
+# BR2_ENABLE_LOCALE is not set
+BR2_USE_WCHAR=y
+BR2_SOFT_FLOAT=y
+# BR2_USE_SSP is not set
+# BR2_PTHREADS_NONE is not set
+# BR2_PTHREADS is not set
+BR2_PTHREADS_OLD=y
+# BR2_PTHREADS_NATIVE is not set
+# BR2_INSTALL_LIBSTDCPP is not set
+BR2_TARGET_OPTIMIZATION="-Os -pipe"
 # BR2_MKLIBS is not set
 # BR2_PACKAGE_SSTRIP_TARGET is not set
 # BR2_PACKAGE_SSTRIP_HOST is not set
 # BR2_ENABLE_MULTILIB is not set
-BR2_LARGEFILE=y
-BR2_INET_IPV6=y
-BR2_INET_RPC=y
-BR2_USE_WCHAR=y
-BR2_SOFT_FLOAT=y
-BR2_TARGET_OPTIMIZATION="-Os -pipe"
 # BR2_CROSS_TOOLCHAIN_TARGET_UTILS is not set
 
 #
 # Package Selection for the target
 #
 BR2_PACKAGE_BUSYBOX=y
-# BR2_BUSYBOX_VERSION_1_2_2_1 is not set
-# BR2_BUSYBOX_VERSION_1_6_1 is not set
-# BR2_BUSYBOX_VERSION_1_7_X is not set
-# BR2_BUSYBOX_VERSION_1_8_X is not set
-# BR2_BUSYBOX_VERSION_1_9_X is not set
-# BR2_BUSYBOX_VERSION_1_10_X is not set
-BR2_BUSYBOX_VERSION_1_11_X=y
+# BR2_BUSYBOX_VERSION_1_12_X is not set
+# BR2_BUSYBOX_VERSION_1_13_X is not set
+BR2_BUSYBOX_VERSION_1_14_X=y
 # BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
-BR2_BUSYBOX_VERSION="1.11.0"
+BR2_BUSYBOX_VERSION="1.14.0"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
-BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_BOARD_PATH)/busybox-$(BR2_BUSYBOX_VERSION).config"
+BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 BR2_PACKAGE_BUSYBOX_HIDE_OTHERS=y
 BR2_PACKAGE_BUSYBOX_SKELETON=y
 
 #
 # The minimum needed to build a uClibc development system
 #
-# BR2_PACKAGE_BASH is not set
-# BR2_PACKAGE_BZIP2 is not set
-# BR2_PACKAGE_DIFFUTILS is not set
 # BR2_PACKAGE_FLEX is not set
 # BR2_PACKAGE_GCC_TARGET is not set
 # BR2_PACKAGE_MAKE is not set
@@ -321,10 +302,15 @@ BR2_HOST_FAKEROOT=y
 # BR2_PACKAGE_GETTEXT is not set
 # BR2_PACKAGE_LIBINTL is not set
 # BR2_PACKAGE_LIBGMP is not set
+# BR2_PACKAGE_GPERF is not set
 # BR2_PACKAGE_LIBMPFR is not set
 # BR2_PACKAGE_LIBTOOL is not set
 # BR2_PACKAGE_M4 is not set
-# BR2_PACKAGE_OPROFILE is not set
+
+#
+# oprofile requires a toolchain with C++ support enabled
+#
+# BR2_PACKAGE_PKG_CONFIG is not set
 # BR2_PACKAGE_READLINE is not set
 # BR2_PACKAGE_PCRE is not set
 
@@ -337,81 +323,91 @@ BR2_HOST_FAKEROOT=y
 # BR2_PACKAGE_BSDIFF is not set
 # BR2_PACKAGE_CUPS is not set
 # BR2_PACKAGE_CUSTOMIZE is not set
-# BR2_PACKAGE_DASH is not set
 # BR2_PACKAGE_FILE is not set
 # BR2_PACKAGE_GAMIN is not set
-# BR2_PACKAGE_ICU is not set
-# BR2_PACKAGE_IPKG is not set
+
+#
+# icu requires a toolchain with C++ support and WCHAR enabled
+#
 # BR2_PACKAGE_KEXEC is not set
+# BR2_PACKAGE_LIBCONFIG is not set
+# BR2_PACKAGE_LIBCONFUSE is not set
 BR2_PACKAGE_LIBDAEMON=y
 # BR2_PACKAGE_LIBELF is not set
 # BR2_PACKAGE_LIBEVENT is not set
-# BR2_PACKAGE_LIBFLOAT is not set
 # BR2_PACKAGE_LIBGCRYPT is not set
 # BR2_PACKAGE_LIBGPG_ERROR is not set
 # BR2_PACKAGE_LIBICONV is not set
+# BR2_PACKAGE_LIBIDN is not set
 # BR2_PACKAGE_LIBLOCKFILE is not set
+# BR2_PACKAGE_LIBOIL is not set
 # BR2_PACKAGE_LIBSYSFS is not set
 # BR2_PACKAGE_LOCKFILE_PROGS is not set
+# BR2_PACKAGE_LOGROTATE is not set
 # BR2_PACKAGE_LSOF is not set
 # BR2_PACKAGE_LTP-TESTSUITE is not set
 # BR2_PACKAGE_LTRACE is not set
-# BR2_PACKAGE_LTT is not set
+# BR2_PACKAGE_MEMSTAT is not set
 # BR2_PACKAGE_NG_SPICE_REWORK is not set
 # BR2_PACKAGE_POPT is not set
-# BR2_PACKAGE_PORTAGE is not set
 # BR2_PACKAGE_SCREEN is not set
-# BR2_PACKAGE_SQLITE is not set
+# BR2_PACKAGE_SHARED_MIME_INFO is not set
 # BR2_PACKAGE_STARTUP_NOTIFICATION is not set
 # BR2_PACKAGE_STRACE is not set
 # BR2_PACKAGE_SUDO is not set
-BR2_DATABASE_SUPPORT=y
-# BR2_PACKAGE_MYSQL_CLIENT is not set
-BR2_NETWORK_SUPPORT=y
+
+#
+# Database
+#
+
+#
+# Mysql client requires a toolchain with C++ support enabled
+#
+# BR2_PACKAGE_SQLITE is not set
+
+#
+# Networking
+#
 
 #
 # Networking applications
 #
-
-#
-# argus		- disabled (requires libpcap)
-#
+# BR2_PACKAGE_ARGUS is not set
 BR2_PACKAGE_AVAHI=y
 BR2_PACKAGE_AVAHI_AUTOIPD=y
-
-#
-# mDNS/DNS-SD daemon	- disabled (requires expat)
-#
+# BR2_PACKAGE_AVAHI_DAEMON is not set
 # BR2_PACKAGE_AXEL is not set
-# BR2_PACKAGE_BOA is not set
 # BR2_PACKAGE_BIND is not set
 # BR2_PACKAGE_BRIDGE is not set
-# BR2_PACKAGE_CURL is not set
-# BR2_PACKAGE_LIBCURL is not set
 # BR2_PACKAGE_DNSMASQ is not set
 # BR2_PACKAGE_DROPBEAR is not set
 # BR2_PACKAGE_ETHTOOL is not set
 # BR2_PACKAGE_HASERL is not set
 # BR2_PACKAGE_IFPLUGD is not set
-# BR2_PACKAGE_IRDA_UTILS is not set
-# BR2_PACKAGE_IPERF is not set
-# BR2_PACKAGE_IPROUTE2 is not set
 
 #
-# ipsec-tools	- disabled (requires openssl, flex and the flex library (libfl.a) )
+# iperf requires a toolchain with C++ support enabled
 #
+# BR2_PACKAGE_IPROUTE2 is not set
+# BR2_PACKAGE_IPSEC_TOOLS is not set
 # BR2_PACKAGE_IPTABLES is not set
 # BR2_PACKAGE_KISMET is not set
 # BR2_PACKAGE_L2TP is not set
 # BR2_PACKAGE_LIBCGI is not set
-# BR2_PACKAGE_LIBCGICC is not set
+
+#
+# libcgicc requires a toolchain with C++ support enabled
+#
+# BR2_PACKAGE_LIBCURL is not set
+# BR2_PACKAGE_LIBDNET is not set
 # BR2_PACKAGE_LIBEXOSIP2 is not set
 # BR2_PACKAGE_LIBOSIP2 is not set
 # BR2_PACKAGE_LIBPCAP is not set
+# BR2_PACKAGE_LIBSOUP is not set
+# BR2_PACKAGE_LIBUPNP is not set
 # BR2_PACKAGE_LINKS is not set
 # BR2_PACKAGE_LRZSZ is not set
 # BR2_PACKAGE_MDNSRESPONDER is not set
-# BR2_PACKAGE_MICROCOM is not set
 # BR2_PACKAGE_MIIDIAG is not set
 # BR2_PACKAGE_MROUTED is not set
 # BR2_PACKAGE_MUTT is not set
@@ -429,13 +425,12 @@ BR2_PACKAGE_AVAHI_AUTOIPD=y
 # BR2_PACKAGE_OPENSSH is not set
 # BR2_PACKAGE_OPENSSL is not set
 # BR2_PACKAGE_OPENVPN is not set
-# BR2_PACKAGE_OPENSWAN is not set
 # BR2_PACKAGE_PORTMAP is not set
 # BR2_PACKAGE_PPPD is not set
+# BR2_PACKAGE_RADVD is not set
 # BR2_PACKAGE_RP_PPPOE is not set
 # BR2_PACKAGE_PPTP_LINUX is not set
 # BR2_PACKAGE_PROFTPD is not set
-# BR2_PACKAGE_QUAGGA is not set
 
 #
 # quagga suite
@@ -458,32 +453,277 @@ BR2_PACKAGE_AVAHI_AUTOIPD=y
 # BR2_PACKAGE_TN5250 is not set
 # BR2_PACKAGE_TTCP is not set
 # BR2_PACKAGE_UDPCAST is not set
-
-#
-# vpnc		- disabled (requires libgcrypt and libgpg_error)
-#
+# BR2_PACKAGE_VPNC is not set
+# BR2_PACKAGE_VSFTPD is not set
 # BR2_PACKAGE_VTUN is not set
 # BR2_PACKAGE_WEBIF is not set
 # BR2_PACKAGE_WIRELESS_TOOLS is not set
-# BR2_BLOCKDEV_SUPPORT is not set
+# BR2_PACKAGE_WPA_SUPPLICANT is not set
+
+#
+# Hardware handling / blockdevices and filesystem maintenance
+#
+
+#
+# dbus not available (need expat or libxml2)
+#
+
+#
+# dbus-glib needs dbus to be compiled with expat support
+#
+# BR2_PACKAGE_DEVMEM2 is not set
+# BR2_PACKAGE_DM is not set
+# BR2_PACKAGE_DMRAID is not set
+# BR2_PACKAGE_E2FSPROGS is not set
+# BR2_PACKAGE_EEPROG is not set
+# BR2_PACKAGE_FCONFIG is not set
+# BR2_PACKAGE_FIS is not set
+# BR2_PACKAGE_LIBFUSE is not set
+# BR2_PACKAGE_GADGETFS_TEST is not set
+# BR2_PACKAGE_HAL is not set
+# BR2_PACKAGE_HWDATA is not set
+# BR2_PACKAGE_I2C_TOOLS is not set
+# BR2_PACKAGE_INPUT_TOOLS is not set
+# BR2_PACKAGE_IOSTAT is not set
+# BR2_PACKAGE_LIBAIO is not set
+# BR2_PACKAGE_LIBRAW1394 is not set
+# BR2_PACKAGE_LIBUSB is not set
+# BR2_PACKAGE_LM_SENSORS is not set
+# BR2_PACKAGE_LVM2 is not set
+# BR2_PACKAGE_MDADM is not set
+# BR2_PACKAGE_MEMTESTER is not set
+# BR2_PACKAGE_MKDOSFS is not set
 BR2_PACKAGE_MTD=y
-# BR2_AUDIO_SUPPORT is not set
-# BR2_GRAPHIC_SUPPORT is not set
-# BR2_COMPRESSOR_SUPPORT is not set
-# BR2_SCRIPTING_SUPPORT is not set
-BR2_XML_SUPPORT=y
+BR2_PACKAGE_MTD_UTILS=y
+# BR2_PACKAGE_MTD_20061007 is not set
+# BR2_PACKAGE_MTD_20050122 is not set
+# BR2_PACKAGE_MTD_UTILS_GIT is not set
+
+#
+# MTD tools selection
+#
+# BR2_PACKAGE_MTD_DOCFDISK is not set
+# BR2_PACKAGE_MTD_DOC_LOADBIOS is not set
+BR2_PACKAGE_MTD_FLASHCP=y
+BR2_PACKAGE_MTD_FLASH_ERASE=y
+BR2_PACKAGE_MTD_FLASH_ERASEALL=y
+BR2_PACKAGE_MTD_FLASH_INFO=y
+BR2_PACKAGE_MTD_FLASH_LOCK=y
+BR2_PACKAGE_MTD_FLASH_UNLOCK=y
+BR2_PACKAGE_MTD_FTL_CHECK=y
+BR2_PACKAGE_MTD_FTL_FORMAT=y
+BR2_PACKAGE_MTD_JFFS2DUMP=y
+BR2_PACKAGE_MTD_MKFSJFFS2=y
+# BR2_PACKAGE_MTD_MKFSJFFS is not set
+BR2_PACKAGE_MTD_MTD_DEBUG=y
+BR2_PACKAGE_MTD_NANDDUMP=y
+BR2_PACKAGE_MTD_NANDWRITE=y
+# BR2_PACKAGE_MTD_NFTL_FORMAT is not set
+# BR2_PACKAGE_MTD_NFTLDUMP is not set
+BR2_PACKAGE_MTD_SUMTOOL=y
+# BR2_PACKAGE_NTFS_3G is not set
+# BR2_PACKAGE_PCIUTILS is not set
+# BR2_PACKAGE_PCMCIA is not set
+# BR2_PACKAGE_SETSERIAL is not set
+# BR2_PACKAGE_SMARTMONTOOLS is not set
+# BR2_PACKAGE_USBMOUNT is not set
+# BR2_PACKAGE_USBUTILS is not set
+# BR2_PACKAGE_WIPE is not set
+# BR2_PACKAGE_XFSPROGS is not set
+
+#
+# Audio and video libraries and applications
+#
+# BR2_PACKAGE_ALSA_LIB is not set
+
+#
+# asterisk	- disabled (required openssl and mpg123)
+#
+# BR2_PACKAGE_AUMIX is not set
+# BR2_PACKAGE_FLAC is not set
+# BR2_PACKAGE_GSTREAMER is not set
+# BR2_PACKAGE_LIBID3TAG is not set
+# BR2_PACKAGE_LIBMAD is not set
+# BR2_PACKAGE_LIBMPD is not set
+# BR2_PACKAGE_LIBOGG is not set
+# BR2_PACKAGE_LIBSNDFILE is not set
+# BR2_PACKAGE_LIBTHEORA is not set
+# BR2_PACKAGE_LIBVORBIS is not set
+# BR2_PACKAGE_MADPLAY is not set
+# BR2_PACKAGE_MPG123 is not set
+# BR2_PACKAGE_MPLAYER is not set
+# BR2_PACKAGE_SPEEX is not set
+# BR2_PACKAGE_FESTIVAL is not set
+
+#
+# taglib requires a toolchain with C++ support enabled
+#
+# BR2_PACKAGE_VLC is not set
+
+#
+# Graphic libraries and applications (graphic/text)
+#
+
+#
+# text rendering libraries
+#
+# BR2_PACKAGE_NCURSES is not set
+# BR2_PACKAGE_NEWT is not set
+# BR2_PACKAGE_SLANG is not set
+
+#
+# text rendering applications
+#
+# BR2_PACKAGE_DIALOG is not set
+
+#
+# graphic libraries
+#
+# BR2_PACKAGE_DIRECTFB is not set
+# BR2_PACKAGE_FBDUMP is not set
+# BR2_PACKAGE_IMAGEMAGICK is not set
+# BR2_PACKAGE_JPEG is not set
+# BR2_PACKAGE_LIBART is not set
+# BR2_PACKAGE_LIBPNG is not set
+# BR2_PACKAGE_LIBUNGIF is not set
+# BR2_PACKAGE_LINUX_FUSION is not set
+# BR2_PACKAGE_PIXMAN is not set
+# BR2_PACKAGE_SDL is not set
+# BR2_PACKAGE_TIFF is not set
+
+#
+# busybox graphic applications
+#
+
+#
+# --> May be broken in busybox
+#
+# BR2_PACKAGE_FBV is not set
+# BR2_PACKAGE_FBSET is not set
+
+#
+# other GUIs
+#
+
+#
+# qtopia4 requires a toolchain with C++ support enabled
+#
+BR2_PACKAGE_XSERVER_none=y
+# BR2_PACKAGE_XSERVER_xorg is not set
+# BR2_PACKAGE_XSERVER_tinyx is not set
+
+#
+# xorg requires a toolchain with LOCALE, LARGEFILE and WCHAR support
+#
+
+#
+# X libraries and helper libraries
+#
+# BR2_PACKAGE_ATK is not set
+# BR2_PACKAGE_CAIRO is not set
+# BR2_PACKAGE_PANGO is not set
+# BR2_PACKAGE_LIBDRM is not set
+# BR2_PACKAGE_LIBERATION is not set
+# BR2_PACKAGE_LIBGLIB12 is not set
+# BR2_PACKAGE_LIBGLIB2 is not set
+# BR2_PACKAGE_OPENMOTIF is not set
+# BR2_PACKAGE_FONTCONFIG is not set
+# BR2_PACKAGE_FREETYPE is not set
+# BR2_PACKAGE_TSLIB is not set
+
+#
+# webkit requires a toolchain with C++ support and WCHAR enabled
+#
+
+#
+# X Window managers
+#
+# BR2_PACKAGE_MATCHBOX is not set
+
+#
+# X applications
+#
+# BR2_PACKAGE_ALSAMIXERGUI is not set
+
+#
+# dillo		- disabled (requires jpeg,libglib12,libgtk12,zlib,libpng and Xorg(7))
+#
+# BR2_PACKAGE_GQVIEW is not set
+# BR2_PACKAGE_GOB2 is not set
+# BR2_PACKAGE_LEAFPAD is not set
+
+#
+# midori		- disabled (requires Xorg(7))
+#
+# BR2_PACKAGE_PCMANFM is not set
+# BR2_PACKAGE_SYLPHEED is not set
+# BR2_PACKAGE_TORSMO is not set
+# BR2_PACKAGE_X11VNC is not set
+# BR2_PACKAGE_XPDF is not set
+# BR2_PACKAGE_XSTROKE is not set
+# BR2_PACKAGE_XVKBD is not set
+
+#
+# Compressors / decompressors
+#
+BR2_PACKAGE_LZO=y
+# BR2_PACKAGE_LZOP is not set
+
+#
+# lzma requires a toolchain with C++ support
+#
+# BR2_PACKAGE_LZMA_HOST is not set
+BR2_PACKAGE_ZLIB=y
+# BR2_PACKAGE_ZLIB_TARGET_HEADERS is not set
+
+#
+# Package managers
+#
+# BR2_PACKAGE_IPKG is not set
+# BR2_PACKAGE_PORTAGE is not set
+
+#
+# Interpreter languages / Scripting
+#
+# BR2_PACKAGE_LUA is not set
+# BR2_PACKAGE_MICROPERL is not set
+# BR2_PACKAGE_PYTHON is not set
+# BR2_PACKAGE_RUBY is not set
+# BR2_PACKAGE_TCL is not set
+# BR2_PACKAGE_PHP is not set
+
+#
+# XML handling
+#
 # BR2_PACKAGE_EXPAT is not set
 # BR2_PACKAGE_EZXML is not set
 # BR2_PACKAGE_LIBXML2 is not set
 # BR2_PACKAGE_LIBXSLT is not set
-# BR2_PACKAGE_XERCES is not set
-BR2_JAVA_SUPPORT=y
+
+#
+# xerces-c++ requires a toolchain with C++ support enabled
+#
+
+#
+# Java
+#
 # BR2_PACKAGE_CLASSPATH is not set
-# BR2_GAMES is not set
+
+#
+# Games
+#
+# BR2_PACKAGE_GNUCHESS is not set
+# BR2_PACKAGE_MAGICCUBE4D is not set
+# BR2_PACKAGE_PRBOOM is not set
+# BR2_PACKAGE_RUBIX is not set
+# BR2_PACKAGE_VICE is not set
+# BR2_PACKAGE_XBOARD is not set
 
 #
 # Target filesystem options
 #
+BR2_ROOTFS_PREFIX="rootfs"
+BR2_ROOTFS_SUFFIX="$(DATE)"
 
 #
 # filesystem for target device
@@ -494,6 +734,7 @@ BR2_JAVA_SUPPORT=y
 BR2_TARGET_ROOTFS_JFFS2=y
 # BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056 is not set
 # BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528 is not set
+# BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_2K_128K is not set
 BR2_TARGET_ROOTFS_JFFS2_FLASH_128=y
 # BR2_TARGET_ROOTFS_JFFS2_FLASH_64 is not set
 # BR2_TARGET_ROOTFS_JFFS2_CUSTOM is not set
@@ -505,7 +746,6 @@ BR2_TARGET_ROOTFS_JFFS2_PAD=y
 BR2_TARGET_ROOTFS_JFFS2_PADSIZE=0x0
 # BR2_TARGET_ROOTFS_JFFS2_LE is not set
 BR2_TARGET_ROOTFS_JFFS2_BE=y
-# BR2_TARGET_ROOTFS_JFFS2_SQUASH is not set
 # BR2_TARGET_ROOTFS_JFFS2_SUMMARY is not set
 BR2_TARGET_ROOTFS_JFFS2_OUTPUT="$(IMAGE).jffs2"
 BR2_TARGET_ROOTFS_JFFS2_COPYTO=""
@@ -525,7 +765,21 @@ BR2_TARGET_ROOTFS_TAR_COPYTO=""
 #
 # bootloader for target device
 #
-# BR2_TARGET_UBOOT is not set
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="atngw100"
+# BR2_TARGET_UBOOT_2009_03 is not set
+# BR2_TARGET_UBOOT_2009_01 is not set
+BR2_TARGET_UBOOT_2008_10=y
+# BR2_TARGET_UBOOT_1_3_4 is not set
+# BR2_TARGET_UBOOT_1_2_0_ATMEL is not set
+BR2_UBOOT_VERSION="2008.10"
+BR2_U_BOOT_SITE="ftp://ftp.denx.de/pub/u-boot"
+# BR2_TARGET_U_BOOT_ARCH_PATCH is not set
+BR2_TARGET_UBOOT_CUSTOM_PATCH=""
+# BR2_TARGET_UBOOT_SILENT is not set
+# BR2_TARGET_UBOOT_TOOL_MKIMAGE is not set
+# BR2_TARGET_UBOOT_TOOL_ENV is not set
+# BR2_TARGET_UBOOT_DEFAULT_ENV is not set
 
 #
 # Kernel
@@ -537,46 +791,41 @@ BR2_KERNEL_LINUX_ADVANCED=y
 BR2_PACKAGE_LINUX=y
 BR2_PACKAGE_LINUX_KCONFIG="$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-2.6.22.5.config"
 BR2_PACKAGE_LINUX_FORMAT="uImage"
-BR2_KERNEL_CURRENT_VERSION="2.6.25.9"
-BR2_KERNEL_NEXT_VERSION="2.6.25"
-BR2_KERNEL_THIS_VERSION="2.6.24"
-BR2_KERNEL_SITE="http://ftp.kernel.org/pub/linux/kernel/v2.6/"
+BR2_KERNEL_CURRENT_VERSION="2.6.29.2"
+BR2_KERNEL_LATEST_2_6_29="2"
+BR2_KERNEL_LATEST_2_6_28="7"
+BR2_KERNEL_LATEST_2_6_27="13"
+BR2_KERNEL_LATEST_2_6_26="8"
+BR2_KERNEL_LATEST_2_6_25="19"
+BR2_KERNEL_LATEST_2_6_24="7"
+BR2_KERNEL_LATEST_2_6_23="17"
+BR2_KERNEL_LATEST_2_6_22="19"
+BR2_KERNEL_LATEST_2_6_21="7"
+BR2_KERNEL_LATEST_2_6_20="21"
+BR2_KERNEL_THIS_VERSION="2.6.29"
+BR2_KERNEL_SITE="http://ftp.kernel.org/pub/linux/kernel/v2.6"
 BR2_MM_PATCH_SITE="http://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6"
 BR2_RC_MM_PATCH_DIR="$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)/2.6.$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)-mm$(BR2_KERNEL_MM_LEVEL)"
 # BR2_LINUX_2_6_STABLE is not set
+BR2_LINUX_2_6_29=y
+# BR2_LINUX_2_6_28 is not set
+# BR2_LINUX_2_6_27 is not set
+# BR2_LINUX_2_6_26 is not set
 # BR2_LINUX_2_6_25 is not set
-BR2_LINUX_2_6_24=y
+# BR2_LINUX_2_6_24 is not set
 # BR2_LINUX_2_6_23 is not set
-# BR2_LINUX_2_6_22_10 is not set
-# BR2_LINUX_2_6_22_1 is not set
 # BR2_LINUX_2_6_22 is not set
-# BR2_LINUX_2_6_21_7 is not set
-# BR2_LINUX_2_6_21_5 is not set
 # BR2_LINUX_2_6_21 is not set
 # BR2_LINUX_2_6_20 is not set
-# BR2_LINUX_2_6_26 is not set
-# BR2_LINUX_2_6_27 is not set
 # BR2_LINUX26_CUSTOM is not set
 
 #
 # Patches
 #
 # BR2_KERNEL_ADD_KERNEL_ORG_PATCH is not set
-# BR2_KERNEL_ADD_PATCH is not set
-BR2_KERNEL_ARCH_PATCH_ENABLED=y
-BR2_ARCH_AVR32_2_6_24=y
-# BR2_ARCH_AVR32_2_6_23 is not set
-# BR2_ARCH_AVR32_2_6_22_10 is not set
-# BR2_ARCH_AVR32_2_6_22_1 is not set
-# BR2_ARCH_AVR32_2_6_21_5 is not set
-# BR2_ARCH_AVR32_2_6_20_4 is not set
-# BR2_LINUX_AVR32_ISI_PATCH is not set
-# BR2_LINUX_AVR32_AC97_PATCH is not set
-# BR2_LINUX_AVR32_PSIF_PATCH is not set
+# BR2_KERNEL_ARCH_PATCH_ENABLED is not set
 BR2_LINUX_BSP_PATCH=""
-# BR2_KERNEL_PREPATCHED is not set
 BR2_KERNEL_BASE=y
-# BR2_KERNEL_LATEST is not set
 BR2_DOWNLOAD_LINUX26_VERSION="$(BR2_KERNEL_THIS_VERSION)"
 BR2_LINUX26_VERSION="$(BR2_KERNEL_THIS_VERSION)"
 
@@ -586,9 +835,6 @@ BR2_LINUX26_VERSION="$(BR2_KERNEL_THIS_VERSION)"
 BR2_PACKAGE_LINUX_USE_KCONFIG=y
 # BR2_PACKAGE_LINUX_USE_DEFCONFIG is not set
 # BR2_PACKAGE_LINUX_USE_XCONFIG is not set
-BR2_MAKE_XCONFIG=y
-# BR2_MAKE_MENUCONFIG is not set
-BR2_KERNEL_CONFIG_METHOD="xconfig"
 # BR2_LINUX_BIN_BZIMAGE is not set
 BR2_LINUX_BIN_UIMAGE=y
 # BR2_LINUX_BIN_VMLINUX is not set

target/device/Atmel/atngw100-expanded/Makefile.in

@@ -1,7 +0,0 @@
-ifeq ($(BR2_TARGET_AVR32_ATNGW100_EXPANDED),y)
-ATNGW100_EXPANDED_PATH=target/device/Atmel/atngw100-expanded
-
-TARGET_SKELETON=$(ATNGW100_EXPANDED_PATH)/target_skeleton
-TARGET_DEVICE_TABLE=$(ATNGW100_EXPANDED_PATH)/device_table.txt
-BR2_PACKAGE_BUSYBOX_CONFIG:=$(BOARD_PATH)/busybox-1.9.1.config
-endif

target/device/Atmel/atngw100-expanded/busybox-1.11.0.config

@@ -1,767 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Busybox version: 1.8.2
-# Sun Dec 23 12:11:59 2007
-#
-CONFIG_HAVE_DOT_CONFIG=y
-
-#
-# Busybox Settings
-#
-
-#
-# General Configuration
-#
-# CONFIG_NITPICK is not set
-# CONFIG_DESKTOP is not set
-# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
-# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
-# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
-CONFIG_SHOW_USAGE=y
-CONFIG_FEATURE_VERBOSE_USAGE=y
-# CONFIG_FEATURE_COMPRESS_USAGE is not set
-# CONFIG_FEATURE_INSTALLER is not set
-# CONFIG_LOCALE_SUPPORT is not set
-CONFIG_GETOPT_LONG=y
-CONFIG_FEATURE_DEVPTS=y
-# CONFIG_FEATURE_CLEAN_UP is not set
-# CONFIG_FEATURE_PIDFILE is not set
-CONFIG_FEATURE_SUID=y
-# CONFIG_FEATURE_SUID_CONFIG is not set
-# CONFIG_FEATURE_SUID_CONFIG_QUIET is not set
-# CONFIG_SELINUX is not set
-# CONFIG_FEATURE_PREFER_APPLETS is not set
-CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
-CONFIG_FEATURE_SYSLOG=y
-CONFIG_FEATURE_HAVE_RPC=y
-
-#
-# Build Options
-#
-CONFIG_STATIC=y
-CONFIG_BUILD_LIBBUSYBOX=y
-# CONFIG_FEATURE_INDIVIDUAL is not set
-# CONFIG_FEATURE_SHARED_BUSYBOX is not set
-CONFIG_LFS=y
-
-#
-# Debugging Options
-#
-# CONFIG_DEBUG is not set
-# CONFIG_WERROR is not set
-CONFIG_NO_DEBUG_LIB=y
-# CONFIG_DMALLOC is not set
-# CONFIG_EFENCE is not set
-CONFIG_INCLUDE_SUSv2=y
-
-#
-# Installation Options
-#
-# CONFIG_INSTALL_NO_USR is not set
-CONFIG_INSTALL_APPLET_SYMLINKS=y
-# CONFIG_INSTALL_APPLET_HARDLINKS is not set
-# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
-# CONFIG_INSTALL_APPLET_DONT is not set
-# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
-# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
-# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
-CONFIG_PREFIX="/usr/avr32-linux"
-
-#
-# Busybox Library Tuning
-#
-CONFIG_PASSWORD_MINLEN=6
-CONFIG_MD5_SIZE_VS_SPEED=2
-CONFIG_FEATURE_FAST_TOP=y
-# CONFIG_FEATURE_ETC_NETWORKS is not set
-CONFIG_FEATURE_EDITING=y
-CONFIG_FEATURE_EDITING_MAX_LEN=1024
-CONFIG_FEATURE_EDITING_FANCY_KEYS=y
-# CONFIG_FEATURE_EDITING_VI is not set
-CONFIG_FEATURE_EDITING_HISTORY=100
-CONFIG_FEATURE_EDITING_SAVEHISTORY=y
-CONFIG_FEATURE_TAB_COMPLETION=y
-# CONFIG_FEATURE_USERNAME_COMPLETION is not set
-CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
-CONFIG_MONOTONIC_SYSCALL=y
-CONFIG_IOCTL_HEX2STR_ERROR=y
-
-#
-# Applets
-#
-
-#
-# Archival Utilities
-#
-CONFIG_AR=y
-CONFIG_FEATURE_AR_LONG_FILENAMES=y
-CONFIG_BUNZIP2=y
-CONFIG_BZIP2=y
-CONFIG_CPIO=y
-CONFIG_DPKG=y
-CONFIG_DPKG_DEB=y
-# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
-CONFIG_GUNZIP=y
-CONFIG_FEATURE_GUNZIP_UNCOMPRESS=y
-CONFIG_GZIP=y
-CONFIG_RPM2CPIO=y
-CONFIG_RPM=y
-CONFIG_FEATURE_RPM_BZ2=y
-CONFIG_TAR=y
-CONFIG_FEATURE_TAR_CREATE=y
-CONFIG_FEATURE_TAR_BZIP2=y
-CONFIG_FEATURE_TAR_LZMA=y
-CONFIG_FEATURE_TAR_FROM=y
-CONFIG_FEATURE_TAR_GZIP=y
-CONFIG_FEATURE_TAR_COMPRESS=y
-CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
-CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY=y
-CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
-CONFIG_FEATURE_TAR_LONG_OPTIONS=y
-CONFIG_UNCOMPRESS=y
-CONFIG_UNLZMA=y
-CONFIG_FEATURE_LZMA_FAST=y
-CONFIG_UNZIP=y
-
-#
-# Common options for cpio and tar
-#
-# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
-
-#
-# Common options for dpkg and dpkg_deb
-#
-CONFIG_FEATURE_DEB_TAR_GZ=y
-CONFIG_FEATURE_DEB_TAR_BZ2=y
-CONFIG_FEATURE_DEB_TAR_LZMA=y
-
-#
-# Coreutils
-#
-CONFIG_BASENAME=y
-CONFIG_CAL=y
-CONFIG_CAT=y
-CONFIG_CATV=y
-CONFIG_CHGRP=y
-CONFIG_CHMOD=y
-CONFIG_CHOWN=y
-CONFIG_CHROOT=y
-CONFIG_CKSUM=y
-CONFIG_COMM=y
-CONFIG_CP=y
-CONFIG_CUT=y
-CONFIG_DATE=y
-CONFIG_FEATURE_DATE_ISOFMT=y
-CONFIG_DD=y
-CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
-CONFIG_FEATURE_DD_IBS_OBS=y
-CONFIG_DF=y
-CONFIG_DIRNAME=y
-CONFIG_DOS2UNIX=y
-CONFIG_UNIX2DOS=y
-CONFIG_DU=y
-CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
-CONFIG_ECHO=y
-CONFIG_FEATURE_FANCY_ECHO=y
-CONFIG_ENV=y
-CONFIG_FEATURE_ENV_LONG_OPTIONS=y
-CONFIG_EXPAND=y
-CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y
-CONFIG_EXPR=y
-CONFIG_EXPR_MATH_SUPPORT_64=y
-CONFIG_FALSE=y
-CONFIG_FOLD=y
-CONFIG_HEAD=y
-CONFIG_FEATURE_FANCY_HEAD=y
-CONFIG_HOSTID=y
-CONFIG_ID=y
-CONFIG_INSTALL=y
-CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
-CONFIG_LENGTH=y
-CONFIG_LN=y
-CONFIG_LOGNAME=y
-CONFIG_LS=y
-CONFIG_FEATURE_LS_FILETYPES=y
-CONFIG_FEATURE_LS_FOLLOWLINKS=y
-CONFIG_FEATURE_LS_RECURSIVE=y
-CONFIG_FEATURE_LS_SORTFILES=y
-CONFIG_FEATURE_LS_TIMESTAMPS=y
-CONFIG_FEATURE_LS_USERNAME=y
-CONFIG_FEATURE_LS_COLOR=y
-CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
-CONFIG_MD5SUM=y
-CONFIG_MKDIR=y
-CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
-CONFIG_MKFIFO=y
-CONFIG_MKNOD=y
-CONFIG_MV=y
-CONFIG_FEATURE_MV_LONG_OPTIONS=y
-CONFIG_NICE=y
-CONFIG_NOHUP=y
-CONFIG_OD=y
-CONFIG_PRINTENV=y
-CONFIG_PRINTF=y
-CONFIG_PWD=y
-CONFIG_READLINK=y
-CONFIG_FEATURE_READLINK_FOLLOW=y
-CONFIG_REALPATH=y
-CONFIG_RM=y
-CONFIG_RMDIR=y
-CONFIG_SEQ=y
-CONFIG_SHA1SUM=y
-CONFIG_SLEEP=y
-CONFIG_FEATURE_FANCY_SLEEP=y
-CONFIG_SORT=y
-CONFIG_FEATURE_SORT_BIG=y
-CONFIG_SPLIT=y
-CONFIG_FEATURE_SPLIT_FANCY=y
-CONFIG_STAT=y
-CONFIG_FEATURE_STAT_FORMAT=y
-CONFIG_STTY=y
-CONFIG_SUM=y
-CONFIG_SYNC=y
-CONFIG_TAIL=y
-CONFIG_FEATURE_FANCY_TAIL=y
-CONFIG_TEE=y
-CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
-CONFIG_TEST=y
-CONFIG_FEATURE_TEST_64=y
-CONFIG_TOUCH=y
-CONFIG_TR=y
-CONFIG_FEATURE_TR_CLASSES=y
-CONFIG_FEATURE_TR_EQUIV=y
-CONFIG_TRUE=y
-CONFIG_TTY=y
-CONFIG_UNAME=y
-CONFIG_UNEXPAND=y
-CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y
-CONFIG_UNIQ=y
-CONFIG_USLEEP=y
-CONFIG_UUDECODE=y
-CONFIG_UUENCODE=y
-CONFIG_WC=y
-CONFIG_FEATURE_WC_LARGE=y
-CONFIG_WHO=y
-CONFIG_WHOAMI=y
-CONFIG_YES=y
-
-#
-# Common options for cp and mv
-#
-CONFIG_FEATURE_PRESERVE_HARDLINKS=y
-
-#
-# Common options for ls, more and telnet
-#
-CONFIG_FEATURE_AUTOWIDTH=y
-
-#
-# Common options for df, du, ls
-#
-CONFIG_FEATURE_HUMAN_READABLE=y
-
-#
-# Common options for md5sum, sha1sum
-#
-CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
-
-#
-# Console Utilities
-#
-CONFIG_CHVT=y
-CONFIG_CLEAR=y
-CONFIG_DEALLOCVT=y
-CONFIG_DUMPKMAP=y
-CONFIG_KBD_MODE=y
-CONFIG_LOADFONT=y
-CONFIG_LOADKMAP=y
-CONFIG_OPENVT=y
-CONFIG_RESET=y
-CONFIG_RESIZE=y
-CONFIG_FEATURE_RESIZE_PRINT=y
-CONFIG_SETCONSOLE=y
-CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y
-CONFIG_SETKEYCODES=y
-CONFIG_SETLOGCONS=y
-
-#
-# Debian Utilities
-#
-CONFIG_MKTEMP=y
-# CONFIG_PIPE_PROGRESS is not set
-CONFIG_RUN_PARTS=y
-CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
-# CONFIG_FEATURE_RUN_PARTS_FANCY is not set
-CONFIG_START_STOP_DAEMON=y
-CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
-CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
-CONFIG_WHICH=y
-
-#
-# Editors
-#
-CONFIG_AWK=y
-CONFIG_FEATURE_AWK_MATH=y
-CONFIG_CMP=y
-CONFIG_DIFF=y
-CONFIG_FEATURE_DIFF_BINARY=y
-CONFIG_FEATURE_DIFF_DIR=y
-CONFIG_FEATURE_DIFF_MINIMAL=y
-CONFIG_ED=y
-CONFIG_PATCH=y
-CONFIG_SED=y
-CONFIG_VI=y
-CONFIG_FEATURE_VI_MAX_LEN=1024
-CONFIG_FEATURE_VI_COLON=y
-CONFIG_FEATURE_VI_YANKMARK=y
-CONFIG_FEATURE_VI_SEARCH=y
-CONFIG_FEATURE_VI_USE_SIGNALS=y
-CONFIG_FEATURE_VI_DOT_CMD=y
-CONFIG_FEATURE_VI_READONLY=y
-CONFIG_FEATURE_VI_SETOPTS=y
-CONFIG_FEATURE_VI_SET=y
-CONFIG_FEATURE_VI_WIN_RESIZE=y
-CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
-CONFIG_FEATURE_ALLOW_EXEC=y
-
-#
-# Finding Utilities
-#
-CONFIG_FIND=y
-CONFIG_FEATURE_FIND_PRINT0=y
-CONFIG_FEATURE_FIND_MTIME=y
-CONFIG_FEATURE_FIND_MMIN=y
-CONFIG_FEATURE_FIND_PERM=y
-CONFIG_FEATURE_FIND_TYPE=y
-CONFIG_FEATURE_FIND_XDEV=y
-CONFIG_FEATURE_FIND_MAXDEPTH=y
-CONFIG_FEATURE_FIND_NEWER=y
-CONFIG_FEATURE_FIND_INUM=y
-CONFIG_FEATURE_FIND_EXEC=y
-CONFIG_FEATURE_FIND_USER=y
-CONFIG_FEATURE_FIND_GROUP=y
-CONFIG_FEATURE_FIND_NOT=y
-CONFIG_FEATURE_FIND_DEPTH=y
-CONFIG_FEATURE_FIND_PAREN=y
-CONFIG_FEATURE_FIND_SIZE=y
-CONFIG_FEATURE_FIND_PRUNE=y
-CONFIG_FEATURE_FIND_DELETE=y
-CONFIG_FEATURE_FIND_PATH=y
-CONFIG_FEATURE_FIND_REGEX=y
-# CONFIG_FEATURE_FIND_CONTEXT is not set
-CONFIG_GREP=y
-CONFIG_FEATURE_GREP_EGREP_ALIAS=y
-CONFIG_FEATURE_GREP_FGREP_ALIAS=y
-CONFIG_FEATURE_GREP_CONTEXT=y
-CONFIG_XARGS=y
-CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
-CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
-CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
-CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
-
-#
-# Init Utilities
-#
-CONFIG_INIT=y
-# CONFIG_DEBUG_INIT is not set
-CONFIG_FEATURE_USE_INITTAB=y
-CONFIG_FEATURE_INIT_SCTTY=y
-CONFIG_FEATURE_INIT_SYSLOG=y
-CONFIG_FEATURE_EXTRA_QUIET=y
-# CONFIG_FEATURE_INIT_COREDUMPS is not set
-CONFIG_FEATURE_INITRD=y
-CONFIG_HALT=y
-CONFIG_MESG=y
-
-#
-# Login/Password Management Utilities
-#
-CONFIG_FEATURE_SHADOWPASSWDS=y
-# CONFIG_USE_BB_SHADOW is not set
-# CONFIG_USE_BB_PWD_GRP is not set
-CONFIG_ADDGROUP=y
-CONFIG_FEATURE_ADDUSER_TO_GROUP=y
-CONFIG_DELGROUP=y
-CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
-CONFIG_ADDUSER=y
-CONFIG_DELUSER=y
-CONFIG_GETTY=y
-CONFIG_FEATURE_UTMP=y
-CONFIG_FEATURE_WTMP=y
-CONFIG_LOGIN=y
-# CONFIG_PAM is not set
-CONFIG_LOGIN_SCRIPTS=y
-CONFIG_FEATURE_NOLOGIN=y
-CONFIG_FEATURE_SECURETTY=y
-CONFIG_PASSWD=y
-CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
-# CONFIG_CRYPTPW is not set
-# CONFIG_CHPASSWD is not set
-CONFIG_SU=y
-CONFIG_FEATURE_SU_SYSLOG=y
-CONFIG_FEATURE_SU_CHECKS_SHELLS=y
-CONFIG_SULOGIN=y
-CONFIG_VLOCK=y
-
-#
-# Linux Ext2 FS Progs
-#
-CONFIG_CHATTR=y
-CONFIG_FSCK=y
-CONFIG_LSATTR=y
-
-#
-# Linux Module Utilities
-#
-CONFIG_INSMOD=y
-# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
-# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
-# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
-CONFIG_FEATURE_INSMOD_LOAD_MAP=y
-CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL=y
-CONFIG_RMMOD=y
-CONFIG_LSMOD=y
-CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
-CONFIG_MODPROBE=y
-CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y
-CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y
-
-#
-# Options common to multiple modutils
-#
-CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
-# CONFIG_FEATURE_2_4_MODULES is not set
-CONFIG_FEATURE_2_6_MODULES=y
-# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set
-
-#
-# Linux System Utilities
-#
-CONFIG_DMESG=y
-CONFIG_FEATURE_DMESG_PRETTY=y
-CONFIG_FBSET=y
-CONFIG_FEATURE_FBSET_FANCY=y
-CONFIG_FEATURE_FBSET_READMODE=y
-CONFIG_FDFLUSH=y
-CONFIG_FDFORMAT=y
-CONFIG_FDISK=y
-CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
-CONFIG_FEATURE_FDISK_WRITABLE=y
-# CONFIG_FEATURE_AIX_LABEL is not set
-# CONFIG_FEATURE_SGI_LABEL is not set
-# CONFIG_FEATURE_SUN_LABEL is not set
-# CONFIG_FEATURE_OSF_LABEL is not set
-# CONFIG_FEATURE_FDISK_ADVANCED is not set
-# CONFIG_FREERAMDISK is not set
-# CONFIG_FSCK_MINIX is not set
-# CONFIG_MKFS_MINIX is not set
-# CONFIG_FEATURE_MINIX2 is not set
-CONFIG_GETOPT=y
-CONFIG_HEXDUMP=y
-CONFIG_HWCLOCK=y
-# CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS is not set
-# CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS is not set
-CONFIG_IPCRM=y
-CONFIG_IPCS=y
-CONFIG_LOSETUP=y
-CONFIG_MDEV=y
-CONFIG_FEATURE_MDEV_CONF=y
-CONFIG_FEATURE_MDEV_EXEC=y
-CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
-CONFIG_MKSWAP=y
-# CONFIG_FEATURE_MKSWAP_V0 is not set
-CONFIG_MORE=y
-CONFIG_FEATURE_USE_TERMIOS=y
-CONFIG_MOUNT=y
-CONFIG_FEATURE_MOUNT_HELPERS=y
-CONFIG_FEATURE_MOUNT_NFS=y
-CONFIG_FEATURE_MOUNT_CIFS=y
-CONFIG_FEATURE_MOUNT_FLAGS=y
-CONFIG_FEATURE_MOUNT_FSTAB=y
-CONFIG_PIVOT_ROOT=y
-CONFIG_RDATE=y
-CONFIG_READPROFILE=y
-CONFIG_SETARCH=y
-CONFIG_SWAPONOFF=y
-CONFIG_SWITCH_ROOT=y
-CONFIG_UMOUNT=y
-CONFIG_FEATURE_UMOUNT_ALL=y
-
-#
-# Common options for mount/umount
-#
-CONFIG_FEATURE_MOUNT_LOOP=y
-CONFIG_FEATURE_MTAB_SUPPORT=y
-
-#
-# Miscellaneous Utilities
-#
-# CONFIG_ADJTIMEX is not set
-CONFIG_BBCONFIG=y
-CONFIG_CHRT=y
-CONFIG_CROND=y
-CONFIG_DEBUG_CROND_OPTION=y
-# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
-CONFIG_CRONTAB=y
-CONFIG_DC=y
-# CONFIG_DEVFSD is not set
-# CONFIG_DEVFSD_MODLOAD is not set
-# CONFIG_DEVFSD_FG_NP is not set
-# CONFIG_DEVFSD_VERBOSE is not set
-# CONFIG_FEATURE_DEVFS is not set
-# CONFIG_EJECT is not set
-CONFIG_LAST=y
-CONFIG_LESS=y
-CONFIG_FEATURE_LESS_MAXLINES=9999999
-CONFIG_FEATURE_LESS_BRACKETS=y
-CONFIG_FEATURE_LESS_FLAGS=y
-CONFIG_FEATURE_LESS_FLAGCS=y
-CONFIG_FEATURE_LESS_MARKS=y
-CONFIG_FEATURE_LESS_REGEXP=y
-CONFIG_HDPARM=y
-CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
-CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y
-CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y
-CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y
-CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y
-CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
-CONFIG_MAKEDEVS=y
-# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
-CONFIG_FEATURE_MAKEDEVS_TABLE=y
-CONFIG_MICROCOM=y
-CONFIG_MOUNTPOINT=y
-CONFIG_MT=y
-# CONFIG_RAIDAUTORUN is not set
-# CONFIG_READAHEAD is not set
-CONFIG_RUNLEVEL=y
-CONFIG_RX=y
-CONFIG_STRINGS=y
-CONFIG_SETSID=y
-# CONFIG_TASKSET is not set
-# CONFIG_FEATURE_TASKSET_FANCY is not set
-CONFIG_TIME=y
-CONFIG_TTYSIZE=y
-CONFIG_WATCHDOG=y
-
-#
-# Networking Utilities
-#
-CONFIG_FEATURE_IPV6=y
-# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
-CONFIG_ARP=y
-CONFIG_ARPING=y
-CONFIG_DNSD=y
-CONFIG_ETHER_WAKE=y
-# CONFIG_FAKEIDENTD is not set
-CONFIG_FTPGET=y
-CONFIG_FTPPUT=y
-CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y
-CONFIG_HOSTNAME=y
-CONFIG_HTTPD=y
-CONFIG_FEATURE_HTTPD_RANGES=y
-CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
-CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP=y
-CONFIG_FEATURE_HTTPD_SETUID=y
-CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
-CONFIG_FEATURE_HTTPD_AUTH_MD5=y
-CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES=y
-CONFIG_FEATURE_HTTPD_CGI=y
-CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y
-CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
-CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y
-CONFIG_FEATURE_HTTPD_ERROR_PAGES=y
-CONFIG_FEATURE_HTTPD_PROXY=y
-CONFIG_IFCONFIG=y
-CONFIG_FEATURE_IFCONFIG_STATUS=y
-# CONFIG_FEATURE_IFCONFIG_SLIP is not set
-# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
-CONFIG_FEATURE_IFCONFIG_HW=y
-# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
-CONFIG_IFUPDOWN=y
-CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
-# CONFIG_FEATURE_IFUPDOWN_IP is not set
-# CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN is not set
-CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN=y
-CONFIG_FEATURE_IFUPDOWN_IPV4=y
-CONFIG_FEATURE_IFUPDOWN_IPV6=y
-# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set
-CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
-CONFIG_INETD=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN=y
-CONFIG_FEATURE_INETD_RPC=y
-# CONFIG_IP is not set
-# CONFIG_FEATURE_IP_ADDRESS is not set
-# CONFIG_FEATURE_IP_LINK is not set
-# CONFIG_FEATURE_IP_ROUTE is not set
-# CONFIG_FEATURE_IP_TUNNEL is not set
-# CONFIG_FEATURE_IP_RULE is not set
-# CONFIG_FEATURE_IP_SHORT_FORMS is not set
-# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
-# CONFIG_IPADDR is not set
-# CONFIG_IPLINK is not set
-# CONFIG_IPROUTE is not set
-# CONFIG_IPTUNNEL is not set
-# CONFIG_IPRULE is not set
-# CONFIG_IPCALC is not set
-# CONFIG_FEATURE_IPCALC_FANCY is not set
-# CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set
-# CONFIG_NAMEIF is not set
-# CONFIG_NC is not set
-# CONFIG_NC_SERVER is not set
-# CONFIG_NC_EXTRA is not set
-CONFIG_NETSTAT=y
-CONFIG_FEATURE_NETSTAT_WIDE=y
-CONFIG_NSLOOKUP=y
-CONFIG_PING=y
-CONFIG_PING6=y
-CONFIG_PSCAN=y
-CONFIG_FEATURE_FANCY_PING=y
-CONFIG_ROUTE=y
-# CONFIG_SLATTACH is not set
-CONFIG_TELNET=y
-CONFIG_FEATURE_TELNET_TTYPE=y
-CONFIG_FEATURE_TELNET_AUTOLOGIN=y
-CONFIG_TELNETD=y
-CONFIG_FEATURE_TELNETD_STANDALONE=y
-CONFIG_TFTP=y
-CONFIG_FEATURE_TFTP_GET=y
-CONFIG_FEATURE_TFTP_PUT=y
-CONFIG_FEATURE_TFTP_BLOCKSIZE=y
-# CONFIG_DEBUG_TFTP is not set
-CONFIG_TRACEROUTE=y
-CONFIG_FEATURE_TRACEROUTE_VERBOSE=y
-# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
-# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
-CONFIG_APP_UDHCPD=y
-# CONFIG_APP_DHCPRELAY is not set
-# CONFIG_APP_DUMPLEASES is not set
-# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
-CONFIG_APP_UDHCPC=y
-# CONFIG_FEATURE_UDHCP_DEBUG is not set
-# CONFIG_FEATURE_RFC3397 is not set
-CONFIG_VCONFIG=y
-CONFIG_WGET=y
-CONFIG_FEATURE_WGET_STATUSBAR=y
-CONFIG_FEATURE_WGET_AUTHENTICATION=y
-# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set
-# CONFIG_ZCIP is not set
-
-#
-# Process Utilities
-#
-CONFIG_FREE=y
-CONFIG_FUSER=y
-CONFIG_KILL=y
-CONFIG_KILLALL=y
-CONFIG_KILLALL5=y
-CONFIG_NMETER=y
-CONFIG_PGREP=y
-CONFIG_PIDOF=y
-CONFIG_FEATURE_PIDOF_SINGLE=y
-CONFIG_FEATURE_PIDOF_OMIT=y
-CONFIG_PKILL=y
-CONFIG_PS=y
-CONFIG_FEATURE_PS_WIDE=y
-CONFIG_RENICE=y
-CONFIG_BB_SYSCTL=y
-CONFIG_TOP=y
-CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
-CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
-CONFIG_FEATURE_TOP_DECIMALS=y
-CONFIG_FEATURE_TOPMEM=y
-CONFIG_UPTIME=y
-CONFIG_WATCH=y
-
-#
-# Shells
-#
-CONFIG_FEATURE_SH_IS_ASH=y
-# CONFIG_FEATURE_SH_IS_HUSH is not set
-# CONFIG_FEATURE_SH_IS_LASH is not set
-# CONFIG_FEATURE_SH_IS_MSH is not set
-# CONFIG_FEATURE_SH_IS_NONE is not set
-CONFIG_ASH=y
-
-#
-# Ash Shell Options
-#
-CONFIG_ASH_JOB_CONTROL=y
-CONFIG_ASH_READ_NCHARS=y
-CONFIG_ASH_READ_TIMEOUT=y
-CONFIG_ASH_ALIAS=y
-CONFIG_ASH_MATH_SUPPORT=y
-CONFIG_ASH_MATH_SUPPORT_64=y
-CONFIG_ASH_GETOPTS=y
-CONFIG_ASH_BUILTIN_ECHO=y
-CONFIG_ASH_BUILTIN_TEST=y
-# CONFIG_ASH_CMDCMD is not set
-# CONFIG_ASH_MAIL is not set
-CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
-# CONFIG_ASH_RANDOM_SUPPORT is not set
-CONFIG_ASH_EXPAND_PRMT=y
-# CONFIG_HUSH is not set
-# CONFIG_HUSH_HELP is not set
-# CONFIG_HUSH_INTERACTIVE is not set
-# CONFIG_HUSH_JOB is not set
-# CONFIG_HUSH_TICK is not set
-# CONFIG_HUSH_IF is not set
-# CONFIG_HUSH_LOOPS is not set
-# CONFIG_LASH is not set
-# CONFIG_MSH is not set
-
-#
-# Bourne Shell Options
-#
-# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
-# CONFIG_FEATURE_SH_STANDALONE is not set
-# CONFIG_CTTYHACK is not set
-
-#
-# System Logging Utilities
-#
-CONFIG_SYSLOGD=y
-CONFIG_FEATURE_ROTATE_LOGFILE=y
-# CONFIG_FEATURE_REMOTE_LOG is not set
-# CONFIG_FEATURE_IPC_SYSLOG is not set
-CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=
-# CONFIG_LOGREAD is not set
-# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set
-CONFIG_KLOGD=y
-CONFIG_LOGGER=y
-
-#
-# Runit Utilities
-#
-# CONFIG_RUNSV is not set
-# CONFIG_RUNSVDIR is not set
-# CONFIG_SV is not set
-# CONFIG_SVLOGD is not set
-# CONFIG_CHPST is not set
-# CONFIG_SETUIDGID is not set
-# CONFIG_ENVUIDGID is not set
-# CONFIG_ENVDIR is not set
-# CONFIG_SOFTLIMIT is not set
-# CONFIG_CHCON is not set
-# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
-# CONFIG_GETENFORCE is not set
-# CONFIG_GETSEBOOL is not set
-# CONFIG_LOAD_POLICY is not set
-# CONFIG_MATCHPATHCON is not set
-# CONFIG_RESTORECON is not set
-# CONFIG_RUNCON is not set
-# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
-# CONFIG_SELINUXENABLED is not set
-# CONFIG_SETENFORCE is not set
-# CONFIG_SETFILES is not set
-# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
-# CONFIG_SETSEBOOL is not set
-
-#
-# ipsvd utilities
-#
-# CONFIG_TCPSVD is not set
-# CONFIG_UDPSVD is not set

target/device/Atmel/atngw100-expanded/busybox-1.9.1.config

@@ -1,767 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Busybox version: 1.8.2
-# Sun Dec 23 12:11:59 2007
-#
-CONFIG_HAVE_DOT_CONFIG=y
-
-#
-# Busybox Settings
-#
-
-#
-# General Configuration
-#
-# CONFIG_NITPICK is not set
-# CONFIG_DESKTOP is not set
-# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
-# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
-# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
-CONFIG_SHOW_USAGE=y
-CONFIG_FEATURE_VERBOSE_USAGE=y
-# CONFIG_FEATURE_COMPRESS_USAGE is not set
-# CONFIG_FEATURE_INSTALLER is not set
-# CONFIG_LOCALE_SUPPORT is not set
-CONFIG_GETOPT_LONG=y
-CONFIG_FEATURE_DEVPTS=y
-# CONFIG_FEATURE_CLEAN_UP is not set
-# CONFIG_FEATURE_PIDFILE is not set
-CONFIG_FEATURE_SUID=y
-# CONFIG_FEATURE_SUID_CONFIG is not set
-# CONFIG_FEATURE_SUID_CONFIG_QUIET is not set
-# CONFIG_SELINUX is not set
-# CONFIG_FEATURE_PREFER_APPLETS is not set
-CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
-CONFIG_FEATURE_SYSLOG=y
-CONFIG_FEATURE_HAVE_RPC=y
-
-#
-# Build Options
-#
-CONFIG_STATIC=y
-CONFIG_BUILD_LIBBUSYBOX=y
-# CONFIG_FEATURE_INDIVIDUAL is not set
-# CONFIG_FEATURE_SHARED_BUSYBOX is not set
-CONFIG_LFS=y
-
-#
-# Debugging Options
-#
-# CONFIG_DEBUG is not set
-# CONFIG_WERROR is not set
-CONFIG_NO_DEBUG_LIB=y
-# CONFIG_DMALLOC is not set
-# CONFIG_EFENCE is not set
-CONFIG_INCLUDE_SUSv2=y
-
-#
-# Installation Options
-#
-# CONFIG_INSTALL_NO_USR is not set
-CONFIG_INSTALL_APPLET_SYMLINKS=y
-# CONFIG_INSTALL_APPLET_HARDLINKS is not set
-# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
-# CONFIG_INSTALL_APPLET_DONT is not set
-# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
-# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
-# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
-CONFIG_PREFIX="/usr/avr32-linux"
-
-#
-# Busybox Library Tuning
-#
-CONFIG_PASSWORD_MINLEN=6
-CONFIG_MD5_SIZE_VS_SPEED=2
-CONFIG_FEATURE_FAST_TOP=y
-# CONFIG_FEATURE_ETC_NETWORKS is not set
-CONFIG_FEATURE_EDITING=y
-CONFIG_FEATURE_EDITING_MAX_LEN=1024
-CONFIG_FEATURE_EDITING_FANCY_KEYS=y
-# CONFIG_FEATURE_EDITING_VI is not set
-CONFIG_FEATURE_EDITING_HISTORY=100
-CONFIG_FEATURE_EDITING_SAVEHISTORY=y
-CONFIG_FEATURE_TAB_COMPLETION=y
-# CONFIG_FEATURE_USERNAME_COMPLETION is not set
-CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
-CONFIG_MONOTONIC_SYSCALL=y
-CONFIG_IOCTL_HEX2STR_ERROR=y
-
-#
-# Applets
-#
-
-#
-# Archival Utilities
-#
-CONFIG_AR=y
-CONFIG_FEATURE_AR_LONG_FILENAMES=y
-CONFIG_BUNZIP2=y
-CONFIG_BZIP2=y
-CONFIG_CPIO=y
-CONFIG_DPKG=y
-CONFIG_DPKG_DEB=y
-# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
-CONFIG_GUNZIP=y
-CONFIG_FEATURE_GUNZIP_UNCOMPRESS=y
-CONFIG_GZIP=y
-CONFIG_RPM2CPIO=y
-CONFIG_RPM=y
-CONFIG_FEATURE_RPM_BZ2=y
-CONFIG_TAR=y
-CONFIG_FEATURE_TAR_CREATE=y
-CONFIG_FEATURE_TAR_BZIP2=y
-CONFIG_FEATURE_TAR_LZMA=y
-CONFIG_FEATURE_TAR_FROM=y
-CONFIG_FEATURE_TAR_GZIP=y
-CONFIG_FEATURE_TAR_COMPRESS=y
-CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
-CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY=y
-CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
-CONFIG_FEATURE_TAR_LONG_OPTIONS=y
-CONFIG_UNCOMPRESS=y
-CONFIG_UNLZMA=y
-CONFIG_FEATURE_LZMA_FAST=y
-CONFIG_UNZIP=y
-
-#
-# Common options for cpio and tar
-#
-# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
-
-#
-# Common options for dpkg and dpkg_deb
-#
-CONFIG_FEATURE_DEB_TAR_GZ=y
-CONFIG_FEATURE_DEB_TAR_BZ2=y
-CONFIG_FEATURE_DEB_TAR_LZMA=y
-
-#
-# Coreutils
-#
-CONFIG_BASENAME=y
-CONFIG_CAL=y
-CONFIG_CAT=y
-CONFIG_CATV=y
-CONFIG_CHGRP=y
-CONFIG_CHMOD=y
-CONFIG_CHOWN=y
-CONFIG_CHROOT=y
-CONFIG_CKSUM=y
-CONFIG_COMM=y
-CONFIG_CP=y
-CONFIG_CUT=y
-CONFIG_DATE=y
-CONFIG_FEATURE_DATE_ISOFMT=y
-CONFIG_DD=y
-CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
-CONFIG_FEATURE_DD_IBS_OBS=y
-CONFIG_DF=y
-CONFIG_DIRNAME=y
-CONFIG_DOS2UNIX=y
-CONFIG_UNIX2DOS=y
-CONFIG_DU=y
-CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
-CONFIG_ECHO=y
-CONFIG_FEATURE_FANCY_ECHO=y
-CONFIG_ENV=y
-CONFIG_FEATURE_ENV_LONG_OPTIONS=y
-CONFIG_EXPAND=y
-CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y
-CONFIG_EXPR=y
-CONFIG_EXPR_MATH_SUPPORT_64=y
-CONFIG_FALSE=y
-CONFIG_FOLD=y
-CONFIG_HEAD=y
-CONFIG_FEATURE_FANCY_HEAD=y
-CONFIG_HOSTID=y
-CONFIG_ID=y
-CONFIG_INSTALL=y
-CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
-CONFIG_LENGTH=y
-CONFIG_LN=y
-CONFIG_LOGNAME=y
-CONFIG_LS=y
-CONFIG_FEATURE_LS_FILETYPES=y
-CONFIG_FEATURE_LS_FOLLOWLINKS=y
-CONFIG_FEATURE_LS_RECURSIVE=y
-CONFIG_FEATURE_LS_SORTFILES=y
-CONFIG_FEATURE_LS_TIMESTAMPS=y
-CONFIG_FEATURE_LS_USERNAME=y
-CONFIG_FEATURE_LS_COLOR=y
-CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
-CONFIG_MD5SUM=y
-CONFIG_MKDIR=y
-CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
-CONFIG_MKFIFO=y
-CONFIG_MKNOD=y
-CONFIG_MV=y
-CONFIG_FEATURE_MV_LONG_OPTIONS=y
-CONFIG_NICE=y
-CONFIG_NOHUP=y
-CONFIG_OD=y
-CONFIG_PRINTENV=y
-CONFIG_PRINTF=y
-CONFIG_PWD=y
-CONFIG_READLINK=y
-CONFIG_FEATURE_READLINK_FOLLOW=y
-CONFIG_REALPATH=y
-CONFIG_RM=y
-CONFIG_RMDIR=y
-CONFIG_SEQ=y
-CONFIG_SHA1SUM=y
-CONFIG_SLEEP=y
-CONFIG_FEATURE_FANCY_SLEEP=y
-CONFIG_SORT=y
-CONFIG_FEATURE_SORT_BIG=y
-CONFIG_SPLIT=y
-CONFIG_FEATURE_SPLIT_FANCY=y
-CONFIG_STAT=y
-CONFIG_FEATURE_STAT_FORMAT=y
-CONFIG_STTY=y
-CONFIG_SUM=y
-CONFIG_SYNC=y
-CONFIG_TAIL=y
-CONFIG_FEATURE_FANCY_TAIL=y
-CONFIG_TEE=y
-CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
-CONFIG_TEST=y
-CONFIG_FEATURE_TEST_64=y
-CONFIG_TOUCH=y
-CONFIG_TR=y
-CONFIG_FEATURE_TR_CLASSES=y
-CONFIG_FEATURE_TR_EQUIV=y
-CONFIG_TRUE=y
-CONFIG_TTY=y
-CONFIG_UNAME=y
-CONFIG_UNEXPAND=y
-CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y
-CONFIG_UNIQ=y
-CONFIG_USLEEP=y
-CONFIG_UUDECODE=y
-CONFIG_UUENCODE=y
-CONFIG_WC=y
-CONFIG_FEATURE_WC_LARGE=y
-CONFIG_WHO=y
-CONFIG_WHOAMI=y
-CONFIG_YES=y
-
-#
-# Common options for cp and mv
-#
-CONFIG_FEATURE_PRESERVE_HARDLINKS=y
-
-#
-# Common options for ls, more and telnet
-#
-CONFIG_FEATURE_AUTOWIDTH=y
-
-#
-# Common options for df, du, ls
-#
-CONFIG_FEATURE_HUMAN_READABLE=y
-
-#
-# Common options for md5sum, sha1sum
-#
-CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
-
-#
-# Console Utilities
-#
-CONFIG_CHVT=y
-CONFIG_CLEAR=y
-CONFIG_DEALLOCVT=y
-CONFIG_DUMPKMAP=y
-CONFIG_KBD_MODE=y
-CONFIG_LOADFONT=y
-CONFIG_LOADKMAP=y
-CONFIG_OPENVT=y
-CONFIG_RESET=y
-CONFIG_RESIZE=y
-CONFIG_FEATURE_RESIZE_PRINT=y
-CONFIG_SETCONSOLE=y
-CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y
-CONFIG_SETKEYCODES=y
-CONFIG_SETLOGCONS=y
-
-#
-# Debian Utilities
-#
-CONFIG_MKTEMP=y
-# CONFIG_PIPE_PROGRESS is not set
-CONFIG_RUN_PARTS=y
-CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
-# CONFIG_FEATURE_RUN_PARTS_FANCY is not set
-CONFIG_START_STOP_DAEMON=y
-CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
-CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
-CONFIG_WHICH=y
-
-#
-# Editors
-#
-CONFIG_AWK=y
-CONFIG_FEATURE_AWK_MATH=y
-CONFIG_CMP=y
-CONFIG_DIFF=y
-CONFIG_FEATURE_DIFF_BINARY=y
-CONFIG_FEATURE_DIFF_DIR=y
-CONFIG_FEATURE_DIFF_MINIMAL=y
-CONFIG_ED=y
-CONFIG_PATCH=y
-CONFIG_SED=y
-CONFIG_VI=y
-CONFIG_FEATURE_VI_MAX_LEN=1024
-CONFIG_FEATURE_VI_COLON=y
-CONFIG_FEATURE_VI_YANKMARK=y
-CONFIG_FEATURE_VI_SEARCH=y
-CONFIG_FEATURE_VI_USE_SIGNALS=y
-CONFIG_FEATURE_VI_DOT_CMD=y
-CONFIG_FEATURE_VI_READONLY=y
-CONFIG_FEATURE_VI_SETOPTS=y
-CONFIG_FEATURE_VI_SET=y
-CONFIG_FEATURE_VI_WIN_RESIZE=y
-CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
-CONFIG_FEATURE_ALLOW_EXEC=y
-
-#
-# Finding Utilities
-#
-CONFIG_FIND=y
-CONFIG_FEATURE_FIND_PRINT0=y
-CONFIG_FEATURE_FIND_MTIME=y
-CONFIG_FEATURE_FIND_MMIN=y
-CONFIG_FEATURE_FIND_PERM=y
-CONFIG_FEATURE_FIND_TYPE=y
-CONFIG_FEATURE_FIND_XDEV=y
-CONFIG_FEATURE_FIND_MAXDEPTH=y
-CONFIG_FEATURE_FIND_NEWER=y
-CONFIG_FEATURE_FIND_INUM=y
-CONFIG_FEATURE_FIND_EXEC=y
-CONFIG_FEATURE_FIND_USER=y
-CONFIG_FEATURE_FIND_GROUP=y
-CONFIG_FEATURE_FIND_NOT=y
-CONFIG_FEATURE_FIND_DEPTH=y
-CONFIG_FEATURE_FIND_PAREN=y
-CONFIG_FEATURE_FIND_SIZE=y
-CONFIG_FEATURE_FIND_PRUNE=y
-CONFIG_FEATURE_FIND_DELETE=y
-CONFIG_FEATURE_FIND_PATH=y
-CONFIG_FEATURE_FIND_REGEX=y
-# CONFIG_FEATURE_FIND_CONTEXT is not set
-CONFIG_GREP=y
-CONFIG_FEATURE_GREP_EGREP_ALIAS=y
-CONFIG_FEATURE_GREP_FGREP_ALIAS=y
-CONFIG_FEATURE_GREP_CONTEXT=y
-CONFIG_XARGS=y
-CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
-CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
-CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
-CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
-
-#
-# Init Utilities
-#
-CONFIG_INIT=y
-# CONFIG_DEBUG_INIT is not set
-CONFIG_FEATURE_USE_INITTAB=y
-CONFIG_FEATURE_INIT_SCTTY=y
-CONFIG_FEATURE_INIT_SYSLOG=y
-CONFIG_FEATURE_EXTRA_QUIET=y
-# CONFIG_FEATURE_INIT_COREDUMPS is not set
-CONFIG_FEATURE_INITRD=y
-CONFIG_HALT=y
-CONFIG_MESG=y
-
-#
-# Login/Password Management Utilities
-#
-CONFIG_FEATURE_SHADOWPASSWDS=y
-# CONFIG_USE_BB_SHADOW is not set
-# CONFIG_USE_BB_PWD_GRP is not set
-CONFIG_ADDGROUP=y
-CONFIG_FEATURE_ADDUSER_TO_GROUP=y
-CONFIG_DELGROUP=y
-CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
-CONFIG_ADDUSER=y
-CONFIG_DELUSER=y
-CONFIG_GETTY=y
-CONFIG_FEATURE_UTMP=y
-CONFIG_FEATURE_WTMP=y
-CONFIG_LOGIN=y
-# CONFIG_PAM is not set
-CONFIG_LOGIN_SCRIPTS=y
-CONFIG_FEATURE_NOLOGIN=y
-CONFIG_FEATURE_SECURETTY=y
-CONFIG_PASSWD=y
-CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
-# CONFIG_CRYPTPW is not set
-# CONFIG_CHPASSWD is not set
-CONFIG_SU=y
-CONFIG_FEATURE_SU_SYSLOG=y
-CONFIG_FEATURE_SU_CHECKS_SHELLS=y
-CONFIG_SULOGIN=y
-CONFIG_VLOCK=y
-
-#
-# Linux Ext2 FS Progs
-#
-CONFIG_CHATTR=y
-CONFIG_FSCK=y
-CONFIG_LSATTR=y
-
-#
-# Linux Module Utilities
-#
-CONFIG_INSMOD=y
-# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
-# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
-# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
-CONFIG_FEATURE_INSMOD_LOAD_MAP=y
-CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL=y
-CONFIG_RMMOD=y
-CONFIG_LSMOD=y
-CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
-CONFIG_MODPROBE=y
-CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y
-CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y
-
-#
-# Options common to multiple modutils
-#
-CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
-# CONFIG_FEATURE_2_4_MODULES is not set
-CONFIG_FEATURE_2_6_MODULES=y
-# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set
-
-#
-# Linux System Utilities
-#
-CONFIG_DMESG=y
-CONFIG_FEATURE_DMESG_PRETTY=y
-CONFIG_FBSET=y
-CONFIG_FEATURE_FBSET_FANCY=y
-CONFIG_FEATURE_FBSET_READMODE=y
-CONFIG_FDFLUSH=y
-CONFIG_FDFORMAT=y
-CONFIG_FDISK=y
-CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
-CONFIG_FEATURE_FDISK_WRITABLE=y
-# CONFIG_FEATURE_AIX_LABEL is not set
-# CONFIG_FEATURE_SGI_LABEL is not set
-# CONFIG_FEATURE_SUN_LABEL is not set
-# CONFIG_FEATURE_OSF_LABEL is not set
-# CONFIG_FEATURE_FDISK_ADVANCED is not set
-# CONFIG_FREERAMDISK is not set
-# CONFIG_FSCK_MINIX is not set
-# CONFIG_MKFS_MINIX is not set
-# CONFIG_FEATURE_MINIX2 is not set
-CONFIG_GETOPT=y
-CONFIG_HEXDUMP=y
-CONFIG_HWCLOCK=y
-# CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS is not set
-# CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS is not set
-CONFIG_IPCRM=y
-CONFIG_IPCS=y
-CONFIG_LOSETUP=y
-CONFIG_MDEV=y
-CONFIG_FEATURE_MDEV_CONF=y
-CONFIG_FEATURE_MDEV_EXEC=y
-CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
-CONFIG_MKSWAP=y
-# CONFIG_FEATURE_MKSWAP_V0 is not set
-CONFIG_MORE=y
-CONFIG_FEATURE_USE_TERMIOS=y
-CONFIG_MOUNT=y
-CONFIG_FEATURE_MOUNT_HELPERS=y
-CONFIG_FEATURE_MOUNT_NFS=y
-CONFIG_FEATURE_MOUNT_CIFS=y
-CONFIG_FEATURE_MOUNT_FLAGS=y
-CONFIG_FEATURE_MOUNT_FSTAB=y
-CONFIG_PIVOT_ROOT=y
-CONFIG_RDATE=y
-CONFIG_READPROFILE=y
-CONFIG_SETARCH=y
-CONFIG_SWAPONOFF=y
-CONFIG_SWITCH_ROOT=y
-CONFIG_UMOUNT=y
-CONFIG_FEATURE_UMOUNT_ALL=y
-
-#
-# Common options for mount/umount
-#
-CONFIG_FEATURE_MOUNT_LOOP=y
-CONFIG_FEATURE_MTAB_SUPPORT=y
-
-#
-# Miscellaneous Utilities
-#
-# CONFIG_ADJTIMEX is not set
-CONFIG_BBCONFIG=y
-CONFIG_CHRT=y
-CONFIG_CROND=y
-CONFIG_DEBUG_CROND_OPTION=y
-# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
-CONFIG_CRONTAB=y
-CONFIG_DC=y
-# CONFIG_DEVFSD is not set
-# CONFIG_DEVFSD_MODLOAD is not set
-# CONFIG_DEVFSD_FG_NP is not set
-# CONFIG_DEVFSD_VERBOSE is not set
-# CONFIG_FEATURE_DEVFS is not set
-# CONFIG_EJECT is not set
-CONFIG_LAST=y
-CONFIG_LESS=y
-CONFIG_FEATURE_LESS_MAXLINES=9999999
-CONFIG_FEATURE_LESS_BRACKETS=y
-CONFIG_FEATURE_LESS_FLAGS=y
-CONFIG_FEATURE_LESS_FLAGCS=y
-CONFIG_FEATURE_LESS_MARKS=y
-CONFIG_FEATURE_LESS_REGEXP=y
-CONFIG_HDPARM=y
-CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
-CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y
-CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y
-CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y
-CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y
-CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
-CONFIG_MAKEDEVS=y
-# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
-CONFIG_FEATURE_MAKEDEVS_TABLE=y
-CONFIG_MICROCOM=y
-CONFIG_MOUNTPOINT=y
-CONFIG_MT=y
-# CONFIG_RAIDAUTORUN is not set
-# CONFIG_READAHEAD is not set
-CONFIG_RUNLEVEL=y
-CONFIG_RX=y
-CONFIG_STRINGS=y
-CONFIG_SETSID=y
-# CONFIG_TASKSET is not set
-# CONFIG_FEATURE_TASKSET_FANCY is not set
-CONFIG_TIME=y
-CONFIG_TTYSIZE=y
-CONFIG_WATCHDOG=y
-
-#
-# Networking Utilities
-#
-CONFIG_FEATURE_IPV6=y
-# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
-CONFIG_ARP=y
-CONFIG_ARPING=y
-CONFIG_DNSD=y
-CONFIG_ETHER_WAKE=y
-# CONFIG_FAKEIDENTD is not set
-CONFIG_FTPGET=y
-CONFIG_FTPPUT=y
-CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y
-CONFIG_HOSTNAME=y
-CONFIG_HTTPD=y
-CONFIG_FEATURE_HTTPD_RANGES=y
-CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
-CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP=y
-CONFIG_FEATURE_HTTPD_SETUID=y
-CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
-CONFIG_FEATURE_HTTPD_AUTH_MD5=y
-CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES=y
-CONFIG_FEATURE_HTTPD_CGI=y
-CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y
-CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
-CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y
-CONFIG_FEATURE_HTTPD_ERROR_PAGES=y
-CONFIG_FEATURE_HTTPD_PROXY=y
-CONFIG_IFCONFIG=y
-CONFIG_FEATURE_IFCONFIG_STATUS=y
-# CONFIG_FEATURE_IFCONFIG_SLIP is not set
-# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
-CONFIG_FEATURE_IFCONFIG_HW=y
-# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
-CONFIG_IFUPDOWN=y
-CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
-# CONFIG_FEATURE_IFUPDOWN_IP is not set
-# CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN is not set
-CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN=y
-CONFIG_FEATURE_IFUPDOWN_IPV4=y
-CONFIG_FEATURE_IFUPDOWN_IPV6=y
-# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set
-CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
-CONFIG_INETD=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN=y
-CONFIG_FEATURE_INETD_RPC=y
-# CONFIG_IP is not set
-# CONFIG_FEATURE_IP_ADDRESS is not set
-# CONFIG_FEATURE_IP_LINK is not set
-# CONFIG_FEATURE_IP_ROUTE is not set
-# CONFIG_FEATURE_IP_TUNNEL is not set
-# CONFIG_FEATURE_IP_RULE is not set
-# CONFIG_FEATURE_IP_SHORT_FORMS is not set
-# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
-# CONFIG_IPADDR is not set
-# CONFIG_IPLINK is not set
-# CONFIG_IPROUTE is not set
-# CONFIG_IPTUNNEL is not set
-# CONFIG_IPRULE is not set
-# CONFIG_IPCALC is not set
-# CONFIG_FEATURE_IPCALC_FANCY is not set
-# CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set
-# CONFIG_NAMEIF is not set
-# CONFIG_NC is not set
-# CONFIG_NC_SERVER is not set
-# CONFIG_NC_EXTRA is not set
-CONFIG_NETSTAT=y
-CONFIG_FEATURE_NETSTAT_WIDE=y
-CONFIG_NSLOOKUP=y
-CONFIG_PING=y
-CONFIG_PING6=y
-CONFIG_PSCAN=y
-CONFIG_FEATURE_FANCY_PING=y
-CONFIG_ROUTE=y
-# CONFIG_SLATTACH is not set
-CONFIG_TELNET=y
-CONFIG_FEATURE_TELNET_TTYPE=y
-CONFIG_FEATURE_TELNET_AUTOLOGIN=y
-CONFIG_TELNETD=y
-CONFIG_FEATURE_TELNETD_STANDALONE=y
-CONFIG_TFTP=y
-CONFIG_FEATURE_TFTP_GET=y
-CONFIG_FEATURE_TFTP_PUT=y
-CONFIG_FEATURE_TFTP_BLOCKSIZE=y
-# CONFIG_DEBUG_TFTP is not set
-CONFIG_TRACEROUTE=y
-CONFIG_FEATURE_TRACEROUTE_VERBOSE=y
-# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
-# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
-CONFIG_APP_UDHCPD=y
-# CONFIG_APP_DHCPRELAY is not set
-# CONFIG_APP_DUMPLEASES is not set
-# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
-CONFIG_APP_UDHCPC=y
-# CONFIG_FEATURE_UDHCP_DEBUG is not set
-# CONFIG_FEATURE_RFC3397 is not set
-CONFIG_VCONFIG=y
-CONFIG_WGET=y
-CONFIG_FEATURE_WGET_STATUSBAR=y
-CONFIG_FEATURE_WGET_AUTHENTICATION=y
-# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set
-# CONFIG_ZCIP is not set
-
-#
-# Process Utilities
-#
-CONFIG_FREE=y
-CONFIG_FUSER=y
-CONFIG_KILL=y
-CONFIG_KILLALL=y
-CONFIG_KILLALL5=y
-CONFIG_NMETER=y
-CONFIG_PGREP=y
-CONFIG_PIDOF=y
-CONFIG_FEATURE_PIDOF_SINGLE=y
-CONFIG_FEATURE_PIDOF_OMIT=y
-CONFIG_PKILL=y
-CONFIG_PS=y
-CONFIG_FEATURE_PS_WIDE=y
-CONFIG_RENICE=y
-CONFIG_BB_SYSCTL=y
-CONFIG_TOP=y
-CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
-CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
-CONFIG_FEATURE_TOP_DECIMALS=y
-CONFIG_FEATURE_TOPMEM=y
-CONFIG_UPTIME=y
-CONFIG_WATCH=y
-
-#
-# Shells
-#
-CONFIG_FEATURE_SH_IS_ASH=y
-# CONFIG_FEATURE_SH_IS_HUSH is not set
-# CONFIG_FEATURE_SH_IS_LASH is not set
-# CONFIG_FEATURE_SH_IS_MSH is not set
-# CONFIG_FEATURE_SH_IS_NONE is not set
-CONFIG_ASH=y
-
-#
-# Ash Shell Options
-#
-CONFIG_ASH_JOB_CONTROL=y
-CONFIG_ASH_READ_NCHARS=y
-CONFIG_ASH_READ_TIMEOUT=y
-CONFIG_ASH_ALIAS=y
-CONFIG_ASH_MATH_SUPPORT=y
-CONFIG_ASH_MATH_SUPPORT_64=y
-CONFIG_ASH_GETOPTS=y
-CONFIG_ASH_BUILTIN_ECHO=y
-CONFIG_ASH_BUILTIN_TEST=y
-# CONFIG_ASH_CMDCMD is not set
-# CONFIG_ASH_MAIL is not set
-CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
-# CONFIG_ASH_RANDOM_SUPPORT is not set
-CONFIG_ASH_EXPAND_PRMT=y
-# CONFIG_HUSH is not set
-# CONFIG_HUSH_HELP is not set
-# CONFIG_HUSH_INTERACTIVE is not set
-# CONFIG_HUSH_JOB is not set
-# CONFIG_HUSH_TICK is not set
-# CONFIG_HUSH_IF is not set
-# CONFIG_HUSH_LOOPS is not set
-# CONFIG_LASH is not set
-# CONFIG_MSH is not set
-
-#
-# Bourne Shell Options
-#
-# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
-# CONFIG_FEATURE_SH_STANDALONE is not set
-# CONFIG_CTTYHACK is not set
-
-#
-# System Logging Utilities
-#
-CONFIG_SYSLOGD=y
-CONFIG_FEATURE_ROTATE_LOGFILE=y
-# CONFIG_FEATURE_REMOTE_LOG is not set
-# CONFIG_FEATURE_IPC_SYSLOG is not set
-CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=
-# CONFIG_LOGREAD is not set
-# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set
-CONFIG_KLOGD=y
-CONFIG_LOGGER=y
-
-#
-# Runit Utilities
-#
-# CONFIG_RUNSV is not set
-# CONFIG_RUNSVDIR is not set
-# CONFIG_SV is not set
-# CONFIG_SVLOGD is not set
-# CONFIG_CHPST is not set
-# CONFIG_SETUIDGID is not set
-# CONFIG_ENVUIDGID is not set
-# CONFIG_ENVDIR is not set
-# CONFIG_SOFTLIMIT is not set
-# CONFIG_CHCON is not set
-# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
-# CONFIG_GETENFORCE is not set
-# CONFIG_GETSEBOOL is not set
-# CONFIG_LOAD_POLICY is not set
-# CONFIG_MATCHPATHCON is not set
-# CONFIG_RESTORECON is not set
-# CONFIG_RUNCON is not set
-# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
-# CONFIG_SELINUXENABLED is not set
-# CONFIG_SETENFORCE is not set
-# CONFIG_SETFILES is not set
-# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
-# CONFIG_SETSEBOOL is not set
-
-#
-# ipsvd utilities
-#
-# CONFIG_TCPSVD is not set
-# CONFIG_UDPSVD is not set

target/device/Atmel/atngw100-expanded/device_table.txt

@@ -1,181 +0,0 @@
-# When building a target filesystem, it is desirable to not have to become
-# root and then run 'mknod' a thousand times.  Using a device table you can
-# create device nodes and directories "on the fly".
-#
-# This is a sample device table file for use with genext2fs.  You can do all
-# sorts of interesting things with a device table file.  For example, if you
-# want to adjust the permissions on a particular file you can just add an
-# entry like:
-#   /sbin/foobar        f       2755    0       0       -       -       -       -       -
-# and (assuming the file /sbin/foobar exists) it will be made setuid root
-# (regardless of what its permissions are on the host filesystem.
-# Furthermore, you can use a single table entry to create a many device
-# minors.  For example, if I wanted to create /dev/hda and /dev/hda[0-15] I
-# could just use the following two table entries:
-#   /dev/hda    b       640     0       0       3       0       0       0       -
-#   /dev/hda    b       640     0       0       3       1       1       1       15
-#
-# Device table entries take the form of:
-# <name>    <type>      <mode>  <uid>   <gid>   <major> <minor> <start> <inc>   <count>
-# where name is the file name,  type can be one of:
-#       f       A regular file
-#       d       Directory
-#       c       Character special device file
-#       b       Block special device file
-#       p       Fifo (named pipe)
-# uid is the user id for the target file, gid is the group id for the target
-# file.  The rest of the entries (major, minor, etc) apply only to device
-# special files.
-
-# Have fun
-# -Erik Andersen <andersen@codepoet.org>
-#
-
-#<name>		<type>	<mode>	<uid>	<gid>	<major>	<minor>	<start>	<inc>	<count>
-/dev		d	755	0	0	-	-	-	-	-
-/dev/pts	d	755	0	0	-	-	-	-	-
-/dev/shm	d	755	0	0	-	-	-	-	-
-/tmp		d	1777	0	0	-	-	-	-	-
-/etc		d	755	0	0	-	-	-	-	-
-/sys		d	755	0	0	-	-	-	-	-
-/config		d	755	0	0	-	-	-	-	-
-/proc		d	755	0	0	-	-	-	-	-
-/lost+found	d	700	0	0	-	-	-	-	-
-/var/lock	d	1777	0	0	-	-	-	-	-
-/var/log	d	755	0	0	-	-	-	-	-
-/var/run	d	1777	0	0	-	-	-	-	-
-/var/tmp	d	1777	0	0	-	-	-	-	-
-/home/avr32	d	2755	500	500	-	-	-	-	-
-/home/default	d	2755	1000	1000	-	-	-	-	-
-/media		d	755	0	0	-	-	-	-	-
-/www		d	755	0	0	-	-	-	-	-
-#<name>					<type>	<mode>	<uid>	<gid>	<major>	<minor>	<start>	<inc>	<count>
-/bin/busybox				f	4755	0	0	-	-	-	-	-
-#/etc/shadow				f	600	0	0	-	-	-	-	-
-/etc/passwd				f	644	0	0	-	-	-	-	-
-/etc/network/if-up.d			d	755	0	0	-	-	-	-	-
-/etc/network/if-pre-up.d		d	755	0	0	-	-	-	-	-
-/etc/network/if-down.d			d	755	0	0	-	-	-	-	-
-/etc/network/if-post-down.d		d	755	0	0	-	-	-	-	-
-# uncomment this to allow starting x as non-root
-#/usr/X11R6/bin/Xfbdev		f	4755	0	0	-	-	-	-	-
-# Normal system devices
-#/dev/mem	c	640	0	0	1	1	0	0	-
-#/dev/kmem	c	640	0	0	1	2	0	0	-
-/dev/null	c	666	0	0	1	3	0	0	-
-/dev/zero	c	666	0	0	1	5	0	0	-
-/dev/random	c	666	0	0	1	8	0	0	-
-/dev/urandom	c	666	0	0	1	9	0	0	-
-#/dev/ram	b	640	0	0	1	1	0	0	-
-#/dev/ram	b	640	0	0	1	0	0	1	4
-#/dev/loop	b	640	0	0	7	0	0	1	2
-#/dev/rtc	c	640	0	0	10	135	-	-	-
-/dev/console	c	666	0	0	5	1	-	-	-
-#/dev/tty	c	666	0	0	5	0	-	-	-
-#/dev/tty	c	666	0	0	4	0	0	1	8
-#/dev/ttyp	c	666	0	0	3	0	0	1	10
-#/dev/ptyp	c       666     0       0       2       0       0       1       10
-#/dev/ptmx	c	666	0	0	5	2	-	-	-
-#/dev/ttyP	c	666	0	0	57	0	0	1	4
-/dev/ttyS	c	666	0	0	4	64	0	1	4
-/dev/fb		c	640	0	5	29	0	0	32	4
-#/dev/ttySA	c	666	0	0	204	5	0	1	3
-#/dev/psaux	c	666	0	0	10	1	0	0	-
-#/dev/ppp	c	666	0	0	108	0	-	-	-
-
-# Input stuff
-#/dev/input		d	755	0	0	-	-	-	-	-
-#/dev/input/mice		c	640	0	0	13	63	0	0	-
-#/dev/input/mouse	c	660	0	0	13	32	0	1	4
-#/dev/input/event	c	660	0	0	13	64	0	1	4
-#/dev/input/js		c	660	0	0	13	0	0	1	4
-
-
-# MTD stuff
-#/dev/mtd	c	640	0	0	90	0	0	2	4
-#/dev/mtdblock	b	640	0	0	31	0	0	1	4
-
-#Tun/tap driver
-#/dev/net	d	755	0	0	-	-	-	-	-
-#/dev/net/tun	c	660	0	0	10	200	-	-	-
-
-# Audio stuff
-#/dev/audio	c	666	0	29	14	4	-	-	-
-#/dev/audio1	c	666	0	29	14	20	-	-	-
-#/dev/dsp	c	666	0	29	14	3	-	-	-
-#/dev/dsp1	c	666	0	29	14	19	-	-	-
-#/dev/sndstat	c	666	0	29	14	6	-	-	-
-
-# User-mode Linux stuff
-#/dev/ubda	b	640	0	0	98	0	0	0	-
-#/dev/ubda	b	640	0	0	98	1	1	1	15
-
-# IDE Devices
-#/dev/hda	b	640	0	0	3	0	0	0	-
-#/dev/hda	b	640	0	0	3	1	1	1	15
-#/dev/hdb	b	640	0	0	3	64	0	0	-
-#/dev/hdb	b	640	0	0	3	65	1	1	15
-#/dev/hdc	b	640	0	0	22	0	0	0	-
-#/dev/hdc	b	640	0	0	22	1	1	1	15
-#/dev/hdd	b	640	0	0	22	64	0	0	-
-#/dev/hdd	b	640	0	0	22	65	1	1	15
-#/dev/hde	b	640	0	0	33	0	0	0	-
-#/dev/hde	b	640	0	0	33	1	1	1	15
-#/dev/hdf	b	640	0	0	33	64	0	0	-
-#/dev/hdf	b	640	0	0	33	65	1	1	15
-#/dev/hdg	b	640	0	0	34	0	0	0	-
-#/dev/hdg	b	640	0	0	34	1	1	1	15
-#/dev/hdh	b	640	0	0	34	64	0	0	-
-#/dev/hdh	b	640	0	0	34	65	1	1	15
-
-# SCSI Devices
-#/dev/sda	b	640	0	0	8	0	0	0	-
-#/dev/sda	b	640	0	0	8	1	1	1	15
-#/dev/sdb	b	640	0	0	8	16	0	0	-
-#/dev/sdb	b	640	0	0	8	17	1	1	15
-#/dev/sdc	b	640	0	0	8	32	0	0	-
-#/dev/sdc	b	640	0	0	8	33	1	1	15
-#/dev/sdd	b	640	0	0	8	48	0	0	-
-#/dev/sdd	b	640	0	0	8	49	1	1	15
-#/dev/sde	b	640	0	0	8	64	0	0	-
-#/dev/sde	b	640	0	0	8	65	1	1	15
-#/dev/sdf	b	640	0	0	8	80	0	0	-
-#/dev/sdf	b	640	0	0	8	81	1	1	15
-#/dev/sdg	b	640	0	0	8	96	0	0	-
-#/dev/sdg	b	640	0	0	8	97	1	1	15
-#/dev/sdh	b	640	0	0	8	112	0	0	-
-#/dev/sdh	b	640	0	0	8	113	1	1	15
-#/dev/sg	c	640	0	0	21	0	0	1	15
-#/dev/scd	b	640	0	0	11	0	0	1	15
-#/dev/st	c	640	0	0	9	0	0	1	8
-#/dev/nst	c	640	0	0	9	128	0	1	8
-#/dev/st	c	640	0	0	9	32	1	1	4
-#/dev/st	c	640	0	0	9	64	1	1	4
-#/dev/st	c	640	0	0	9	96	1	1	4
-
-# Floppy disk devices
-#/dev/fd	b	640	0	0	2	0	0	1	2
-#/dev/fd0d360	b	640	0	0	2	4	0	0	-
-#/dev/fd1d360	b	640	0	0	2	5	0	0	-
-#/dev/fd0h1200	b	640	0	0	2	8	0	0	-
-#/dev/fd1h1200	b	640	0	0	2	9	0	0	-
-#/dev/fd0u1440	b	640	0	0	2	28	0	0	-
-#/dev/fd1u1440	b	640	0	0	2	29	0	0	-
-#/dev/fd0u2880	b	640	0	0	2	32	0	0	-
-#/dev/fd1u2880	b	640	0	0	2	33	0	0	-
-
-# All the proprietary cdrom devices in the world
-#/dev/aztcd	b	640	0	0	29	0	0	0	-
-#/dev/bpcd	b	640	0	0	41	0	0	0	-
-#/dev/capi20	c	640	0	0	68	0	0	1	2
-#/dev/cdu31a	b	640	0	0	15	0	0	0	-
-#/dev/cdu535	b	640	0	0	24	0	0	0	-
-#/dev/cm206cd	b	640	0	0	32	0	0	0	-
-#/dev/sjcd	b	640	0	0	18	0	0	0	-
-#/dev/sonycd	b	640	0	0	15	0	0	0	-
-#/dev/gscd	b	640	0	0	16	0	0	0	-
-#/dev/sbpcd	b	640	0	0	25	0	0	0	-
-#/dev/sbpcd	b	640	0	0	25	0	0	1	4
-#/dev/mcd	b	640	0	0	23	0	0	0	-
-#/dev/optcd	b	640	0	0	17	0	0	0	-
-

target/device/Atmel/atngw100-expanded/jffs2_partitions.txt

@@ -1,7 +0,0 @@
-# Partition setup for ATNGW100.
-#
-# root is a 8 MB NOR flash.
-# usr is a 8 MB serial DataFlash.
-#
-# <mount point>		<mount name>	<page size>	<erase size>	<cleanmarkers>	<device file>	<pad size>
-/			root		0x1000		0x10000		1		1		0x0

target/device/Atmel/atngw100-expanded/kernel-patches/linux-2.6.24.4-100-atngw100-add-ac97.patch

@@ -1,10 +0,0 @@
---- a/arch/avr32/boards/atngw100/setup.c	2008-03-14 08:31:39.000000000 -0400
-+++ b/arch/avr32/boards/atngw100/setup.c	2008-03-14 08:33:23.000000000 -0400
-@@ -166,6 +166,7 @@ static int __init atngw100_init(void)
- 	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
- 	at32_add_device_mci(0, &mci0_data);
- 	at32_add_device_usba(0, NULL);
-+	at32_add_device_ac97c(0);
- 
- 	for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
- 		at32_select_gpio(ngw_leds[i].gpio,

target/device/Atmel/atngw100-expanded/kernel-patches/linux-2.6.24.4-200-atngw100-video.patch

@@ -1,148 +0,0 @@
-diff -Nrup linux-2.6.24/arch/avr32/boards/atngw100/setup.c linux-2.6.24-patched/arch/avr32/boards/atngw100/setup.c
---- a/arch/avr32/boards/atngw100/setup.c	2008-01-31 10:47:55.000000000 -0500
-+++ b/arch/avr32/boards/atngw100/setup.c	2008-01-31 10:28:00.000000000 -0500
-@@ -16,6 +16,8 @@
- #include <linux/types.h>
- #include <linux/leds.h>
- #include <linux/spi/spi.h>
-+#include <linux/fb.h>
-+#include <video/atmel_lcdc.h>
- 
- #include <asm/io.h>
- #include <asm/setup.h>
-@@ -28,9 +30,63 @@
- /* Initialized by bootloader-specific startup code. */
- struct tag *bootloader_tags __initdata;
- 
-+static struct fb_videomode __initdata video_modes[] = {
-+	{
-+		.name		= "640x480@60",
-+		.refresh	= 60,
-+		.xres		= 640,		.yres		= 480,
-+		.pixclock	= KHZ2PICOS(23856),
-+
-+		.left_margin	= 80,		.right_margin	= 16,
-+		.upper_margin	= 13,		.lower_margin	= 1,
-+		.hsync_len	= 64,		.vsync_len	= 3,
-+
-+		.sync		= 0,
-+		.vmode		= FB_VMODE_NONINTERLACED,
-+	},
-+	{
-+		.name		= "320x240@117",
-+		.refresh	= 117,
-+		.xres		= 320,		.yres		= 240,
-+		.pixclock	= KHZ2PICOS(12074),
-+
-+		.left_margin	= 40,		.right_margin	= 8,
-+		.upper_margin	= 14,		.lower_margin	= 1,
-+		.hsync_len	= 32,		.vsync_len	= 3,
-+
-+		.sync		= 0,
-+		.vmode		= FB_VMODE_NONINTERLACED,
-+	},
-+};
-+
-+static struct fb_monspecs __initdata atngw100_default_monspecs = {
-+	.manufacturer		= "ATM",
-+	.monitor		= "GENERIC",
-+	.modedb			= video_modes,
-+	.modedb_len		= ARRAY_SIZE(video_modes),
-+	.hfmin			= 14820,
-+	.hfmax			= 32000,
-+	.vfmin			= 30,
-+	.vfmax			= 200,
-+	.dclkmax		= 30000000,
-+};
-+
-+struct atmel_lcdfb_info __initdata atngw100_lcdc_data = {
-+	.default_bpp		= 16,
-+	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-+	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
-+				   | ATMEL_LCDC_INVCLK 
-+				   | ATMEL_LCDC_INVDVAL_NORMAL
-+				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-+				   | ATMEL_LCDC_MEMOR_BIG),
-+	.default_monspecs	= &atngw100_default_monspecs,
-+	.guard_time		= 2,
-+};
-+
- struct eth_addr {
- 	u8 addr[6];
- };
-+
- static struct eth_addr __initdata hw_addr[2];
- static struct eth_platform_data __initdata eth_data[2];
- 
-@@ -155,13 +211,14 @@ static int __init atngw100_init(void)
- 	 * ATNGW100 uses 16-bit SDRAM interface, so we don't need to
- 	 * reserve any pins for it.
- 	 */
-+	at32_add_device_lcdc(1, &atngw100_lcdc_data, fbmem_start, fbmem_size);
- 
- 	at32_add_system_devices();
- 
- 	at32_add_device_usart(0);
- 
- 	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
--	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
-+	//set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
- 
- 	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
- 	at32_add_device_mci(0, &mci0_data);
-diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/at32ap700x.c linux-2.6.24-patched/arch/avr32/mach-at32ap/at32ap700x.c
---- a/arch/avr32/mach-at32ap/at32ap700x.c	2008-01-31 10:47:55.000000000 -0500
-+++ b/arch/avr32/mach-at32ap/at32ap700x.c	2008-01-31 10:29:22.000000000 -0500
-@@ -1133,7 +1142,7 @@ at32_add_device_lcdc(unsigned int id, st
- 	monspecs->modedb = modedb;
- 
- 	switch (id) {
--	case 0:
-+	case 0:		// STK1000 peripheral connections
- 		pdev = &atmel_lcdfb0_device;
- 		select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
- 		select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
-@@ -1170,6 +1179,43 @@ at32_add_device_lcdc(unsigned int id, st
- 		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
- 		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
- 		break;
-+	case 1:		// NGW100 peripheral connections
-+		pdev = &atmel_lcdfb0_device;
-+		//select_peripheral(PC(19), PERIPH_B, 0);	/* CC	  */
-+		select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
-+		select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
-+		select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
-+		select_peripheral(PE(1), PERIPH_B, 0);	/* DVAL	  */
-+		select_peripheral(PE(2), PERIPH_B, 0);	/* MODE	  */
-+		//select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
-+		select_peripheral(PE(3), PERIPH_B, 0);	/* DATA0  */
-+		select_peripheral(PE(4), PERIPH_B, 0);	/* DATA1  */
-+		select_peripheral(PE(5), PERIPH_B, 0);	/* DATA2  */
-+		select_peripheral(PE(6), PERIPH_B, 0);	/* DATA3  */
-+		select_peripheral(PE(7), PERIPH_B, 0);	/* DATA4  */
-+		select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
-+		select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
-+		select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
-+		select_peripheral(PE(8),  PERIPH_B, 0);	/* DATA8  */
-+		select_peripheral(PE(9),  PERIPH_B, 0);	/* DATA9  */
-+		select_peripheral(PE(10),  PERIPH_B, 0);	/* DATA10 */
-+		select_peripheral(PE(11),  PERIPH_B, 0);	/* DATA11 */
-+		select_peripheral(PE(12),  PERIPH_B, 0);	/* DATA12 */
-+		select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
-+		select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
-+		select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
-+		select_peripheral(PE(13), PERIPH_B, 0);	/* DATA16 */
-+		select_peripheral(PE(14), PERIPH_B, 0);	/* DATA17 */
-+		select_peripheral(PE(15), PERIPH_B, 0);	/* DATA18 */
-+		select_peripheral(PE(16), PERIPH_B, 0);	/* DATA19 */
-+		select_peripheral(PE(17), PERIPH_B, 0);	/* DATA20 */
-+		select_peripheral(PE(18), PERIPH_B, 0);	/* DATA21 */
-+		select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
-+		select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
-+
-+		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
-+		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
-+		break;
- 
- 	default:
- 		goto err_invalid_id;

target/device/Atmel/atngw100-expanded/kernel-patches/linux-2.6.24.4-300-avr32-psif-2.patch

@@ -1,27 +0,0 @@
-diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
-index d95f316..20a7193 100644
---- a/drivers/char/keyboard.c
-+++ b/drivers/char/keyboard.c
-@@ -1000,7 +1000,8 @@ DECLARE_TASKLET_DISABLED(keyboard_tasklet, kbd_bh, 0);
- #if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\
-     defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\
-     defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\
--    (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC))
-+    (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC)) ||\
-+    defined(CONFIG_AVR32)
- 
- #define HW_RAW(dev) (test_bit(EV_MSC, dev->evbit) && test_bit(MSC_RAW, dev->mscbit) &&\
- 			((dev)->id.bustype == BUS_I8042) && ((dev)->id.vendor == 0x0001) && ((dev)->id.product == 0x0001))
-diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
---- a/arch/avr32/boards/atngw100/setup.c	2008-01-31 13:38:32.000000000 -0500
-+++ b/arch/avr32/boards/atngw100/setup.c	2008-01-31 13:44:09.000000000 -0500
-@@ -224,6 +224,9 @@ static int __init atngw100_init(void)
- 	at32_add_device_usba(0, NULL);
- 	at32_add_device_ac97c(0);
- 
-+	at32_add_device_psif(0);
-+	at32_add_device_psif(1);
-+
- 	for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
- 		at32_select_gpio(ngw_leds[i].gpio,
- 				AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);

target/device/Atmel/atngw100-expanded/kernel-patches/linux-2.6.24.4-400-atngw100-unlock-uboot-flash.patch

@@ -1,11 +0,0 @@
-diff -Nrup linux-2.6.24/arch/avr32/boards/atngw100/flash.c linux-2.6.24-patched/arch/avr32/boards/atngw100/flash.c
---- a/arch/avr32/boards/atngw100/flash.c	2008-01-31 10:47:55.000000000 -0500
-+++ b/arch/avr32/boards/atngw100/flash.c	2008-01-31 10:21:07.000000000 -0500
-@@ -42,7 +42,6 @@ static struct mtd_partition flash_parts[
- 		.name           = "u-boot",
- 		.offset         = 0x00000000,
- 		.size           = 0x00020000,           /* 128 KiB */
--		.mask_flags     = MTD_WRITEABLE,
- 	},
- 	{
- 		.name           = "root",

target/device/Atmel/atngw100-expanded/kernel-patches/linux-2.6.24.4-500-avr32-ac97-reset.patch

@@ -1,289 +0,0 @@
-diff --git a/sound/avr32/ac97c.c b/sound/avr32/ac97c.c
-index 0ec0b1c..3a58375 100644
---- a/sound/avr32/ac97c.c
-+++ b/sound/avr32/ac97c.c
-@@ -25,6 +25,8 @@
- #include <sound/ac97_codec.h>
- #include <sound/memalloc.h>
- 
-+#include <asm/gpio.h>
-+#include <asm/arch/board.h>
- #include <asm/dma-controller.h>
- 
- #include "ac97c.h"
-@@ -37,6 +39,7 @@ struct atmel_ac97_dma_info {
- 	struct dma_request_cyclic req_rx;
- 	unsigned short rx_periph_id;
- 	unsigned short tx_periph_id;
-+	unsigned short controller;
- };
- 
- struct atmel_ac97 {
-@@ -51,6 +54,7 @@ struct atmel_ac97 {
- 	struct snd_ac97_bus *ac97_bus;
- 	int opened;
- 	int period;
-+	int reset_pin;
- 	u64 cur_format;
- 	unsigned int cur_rate;
- 	struct clk *mck;
-@@ -692,6 +696,12 @@ timed_out:
- 
- static void snd_atmel_ac97_reset(struct atmel_ac97 *chip)
- {
-+	if (chip->reset_pin >= 0) {
-+		gpio_set_value(chip->reset_pin, 0);
-+		udelay(5);
-+		gpio_set_value(chip->reset_pin, 1);
-+	}
-+
- 	ac97c_writel(chip, MR, AC97C_MR_WRST);
- 	mdelay(1);
- 	ac97c_writel(chip, MR, AC97C_MR_ENA);
-@@ -727,6 +737,7 @@ static int __devinit snd_atmel_ac97_create(struct snd_card *card,
- 		.read	= snd_atmel_ac97_read,
- 	};
- 	struct atmel_ac97 *chip = get_chip(card);
-+	struct ac97c_platform_data *pdata;
- 	struct resource *regs;
- 	struct clk *mck;
- 	int err;
-@@ -735,6 +746,29 @@ static int __devinit snd_atmel_ac97_create(struct snd_card *card,
- 	if (!regs)
- 		return -ENXIO;
- 
-+	pdata = pdev->dev.platform_data;
-+	if (pdata) {
-+		chip->reset_pin = pdata->reset_pin;
-+
-+		if (chip->reset_pin >= 0) {
-+			if (gpio_request(chip->reset_pin,
-+						chip->card->shortname)) {
-+				dev_dbg(&pdev->dev,
-+						"ac97: reset pin "
-+						"not available\n");
-+				chip->reset_pin = -1;
-+			} else {
-+				gpio_direction_output(chip->reset_pin, 1);
-+			}
-+		}
-+
-+		chip->dma.rx_periph_id = pdata->dma_rx_periph_id;
-+		chip->dma.tx_periph_id = pdata->dma_tx_periph_id;
-+		chip->dma.controller = pdata->dma_controller_id;
-+	} else {
-+		return -ENXIO;
-+	}
-+
- 	mck = clk_get(&pdev->dev, "pclk");
- 	if (IS_ERR(mck))
- 		return PTR_ERR(mck);
-@@ -789,23 +823,19 @@ static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev)
- 	if (err)
- 		goto out_free_card;
- 
--	/* TODO: Get this information from the platform device */
--	chip->dma.req_tx.req.dmac = find_dma_controller(0);
-+	chip->dma.req_tx.req.dmac = find_dma_controller(chip->dma.controller);
- 	if (!chip->dma.req_tx.req.dmac) {
- 		dev_dbg(&chip->pdev->dev, "DMA controller for TX missing\n");
- 		err = -ENODEV;
- 		goto out_free_card;
- 	}
--	chip->dma.req_rx.req.dmac = find_dma_controller(0);
-+	chip->dma.req_rx.req.dmac = find_dma_controller(chip->dma.controller);
- 	if (!chip->dma.req_rx.req.dmac) {
- 		dev_dbg(&chip->pdev->dev, "DMA controller for RX missing\n");
- 		err = -ENODEV;
- 		goto out_free_card;
- 	}
- 
--	chip->dma.rx_periph_id = 3;
--	chip->dma.tx_periph_id = 4;
--
- 	ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
- 	if (ch < 0) {
- 		dev_dbg(&chip->pdev->dev,
--- 
-1.5.2.5
-diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
-index 06795d0..58f3841 100644
---- a/arch/avr32/mach-at32ap/at32ap700x.c
-+++ b/arch/avr32/mach-at32ap/at32ap700x.c
-@@ -1552,12 +1552,15 @@ static struct clk atmel_ac97c0_pclk = {
- 	.index		= 10,
- };
- 
--struct platform_device *__init at32_add_device_ac97c(unsigned int id)
-+struct platform_device *__init
-+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
- {
- 	struct platform_device *pdev;
- 
- 	if (id != 0)
- 		return NULL;
-+	if (!data)
-+		return NULL;
- 
- 	pdev = platform_device_alloc("atmel_ac97c", id);
- 	if (!pdev)
-@@ -1567,10 +1570,17 @@ struct platform_device *__init at32_add_device_ac97c(unsigned int id)
- 				ARRAY_SIZE(atmel_ac97c0_resource)))
- 		goto err_add_resources;
- 
--	select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
--	select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
--	select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
--	select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
-+	if (platform_device_add_data(pdev, data,
-+				sizeof(struct ac97c_platform_data)))
-+		goto err_add_resources;
-+
-+	select_peripheral(PB(20), PERIPH_B, 0);	/* SDO	*/
-+	select_peripheral(PB(21), PERIPH_B, 0);	/* SYNC	*/
-+	select_peripheral(PB(22), PERIPH_B, 0);	/* SCLK	*/
-+	select_peripheral(PB(23), PERIPH_B, 0);	/* SDI	*/
-+
-+	if (data->reset_pin != GPIO_PIN_NONE)
-+		at32_select_gpio(data->reset_pin, 0);
- 
- 	atmel_ac97c0_pclk.dev = &pdev->dev;
- 
-diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
-index 8816b66..0386a0e 100644
---- a/include/asm-avr32/arch-at32ap/board.h
-+++ b/include/asm-avr32/arch-at32ap/board.h
-@@ -76,7 +76,16 @@ struct mci_platform_data {
- };
- struct platform_device *
- at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
--struct platform_device *at32_add_device_ac97c(unsigned int id);
-+
-+struct ac97c_platform_data {
-+	unsigned short dma_rx_periph_id;
-+	unsigned short dma_tx_periph_id;
-+	unsigned short dma_controller_id;
-+	int reset_pin;
-+};
-+struct platform_device *
-+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data);
-+
- struct platform_device *at32_add_device_abdac(unsigned int id);
- 
- struct cf_platform_data {
--- 
-1.5.2.5
-diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
-index 90436fa..eba6f89 100644
---- a/arch/avr32/boards/atstk1000/atstk1002.c
-+++ b/arch/avr32/boards/atstk1000/atstk1002.c
-@@ -151,6 +151,15 @@ static void __init set_hw_addr(struct platform_device *pdev)
- 	clk_put(pclk);
- }
- 
-+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
-+static struct ac97c_platform_data __initdata ac97c0_data = {
-+	.dma_rx_periph_id	= 3,
-+	.dma_tx_periph_id	= 4,
-+	.dma_controller_id	= 0,
-+	.reset_pin		= GPIO_PIN_NONE,
-+};
-+#endif
-+
- #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
- static void __init atstk1002_setup_extdac(void)
- {
-@@ -253,7 +262,7 @@ static int __init atstk1002_init(void)
- #endif
- 	at32_add_device_usba(0, NULL);
- #ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
--	at32_add_device_ac97c(0);
-+	at32_add_device_ac97c(0, &ac97c0_data);
- #else
- 	at32_add_device_abdac(0);
- #endif
-diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
-index 768d204..2564e3c 100644
---- a/arch/avr32/boards/atstk1000/atstk1003.c
-+++ b/arch/avr32/boards/atstk1000/atstk1003.c
-@@ -72,6 +72,15 @@ static struct cf_platform_data __initdata cf0_data = {
- 	.cs		= 4,
- };
- 
-+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
-+static struct ac97c_platform_data __initdata ac97c0_data = {
-+	.dma_rx_periph_id	= 3,
-+	.dma_tx_periph_id	= 4,
-+	.dma_controller_id	= 0,
-+	.reset_pin		= GPIO_PIN_NONE,
-+};
-+#endif
-+
- #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
- static void __init atstk1003_setup_extdac(void)
- {
-@@ -164,7 +173,7 @@ static int __init atstk1003_init(void)
- #endif
- 	at32_add_device_usba(0, NULL);
- #ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
--	at32_add_device_ac97c(0);
-+	at32_add_device_ac97c(0, &ac97c0_data);
- #else
- 	at32_add_device_abdac(0);
- #endif
-diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
-index 96015dd..3c25a6f 100644
---- a/arch/avr32/boards/atstk1000/atstk1004.c
-+++ b/arch/avr32/boards/atstk1000/atstk1004.c
-@@ -64,6 +64,15 @@ static struct spi_board_info spi1_board_info[] __initdata = { {
- } };
- #endif
- 
-+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
-+static struct ac97c_platform_data __initdata ac97c0_data = {
-+	.dma_rx_periph_id	= 3,
-+	.dma_tx_periph_id	= 4,
-+	.dma_controller_id	= 0,
-+	.reset_pin		= GPIO_PIN_NONE,
-+};
-+#endif
-+
- #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
- static void __init atstk1004_setup_extdac(void)
- {
-@@ -136,7 +145,7 @@ static int __init atstk1004_init(void)
- 			     fbmem_start, fbmem_size);
- 	at32_add_device_usba(0, NULL);
- #ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
--	at32_add_device_ac97c(0);
-+	at32_add_device_ac97c(0, &ac97c0_data);
- #else
- 	at32_add_device_abdac(0);
- #endif
--- 
-1.5.2.5
---- a/arch/avr32/boards/atngw100/setup.c	2008-02-26 12:27:37.000000000 -0500
-+++ b/arch/avr32/boards/atngw100/setup.c	2008-02-26 12:26:08.000000000 -0500
-@@ -201,6 +201,13 @@ static struct platform_device i2c_gpio_d
- };
- #endif
- 
-+static struct ac97c_platform_data __initdata ac97c0_data = {
-+	.dma_rx_periph_id	= 3,
-+	.dma_tx_periph_id	= 4,
-+	.dma_controller_id	= 0,
-+	.reset_pin		= GPIO_PIN_PB(18), // change to whatever pin you want, i.e. GPIO_PIN_PB(18)
-+};
-+
- static int __init atngw100_init(void)
- {
- 	unsigned	i;
-@@ -222,7 +229,7 @@ static int __init atngw100_init(void)
- 	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
- 	at32_add_device_mci(0, &mci0_data);
- 	at32_add_device_usba(0, NULL);
--	at32_add_device_ac97c(0);
-+	at32_add_device_ac97c(0, &ac97c0_data);
- 
- 	for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
- 		at32_select_gpio(ngw_leds[i].gpio,

target/device/Atmel/atngw100-expanded/kernel-patches/linux-2.6.24.4-600-atngw100-disable-psif1.patch

@@ -1,11 +0,0 @@
---- a/arch/avr32/boards/atngw100/setup.c	2008-03-14 09:19:27.000000000 -0400
-+++ b/arch/avr32/boards/atngw100/setup.c	2008-03-14 08:59:24.000000000 -0400
-@@ -233,7 +233,7 @@ static int __init atngw100_init(void)
- 	at32_add_device_ac97c(0, &ac97c0_data);
- 
- 	at32_add_device_psif(0);
--	at32_add_device_psif(1);
-+	//at32_add_device_psif(1);
- 
- 	for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
- 		at32_select_gpio(ngw_leds[i].gpio,

target/device/Atmel/atngw100-expanded/target_skeleton/dev/.DEVICES

@@ -1,69 +0,0 @@
-null c 1 3
-zero c 1 5
-random c 1 8
-urandom c 1 9
-ttyUS0 c 4 64
-ttyUS1 c 4 65
-ttyUS2 c 4 66
-ttyUS3 c 4 67
-tty c 5 0
-ptmx c 5 2
-console c 5 1
-fb0 c 29 0
-spi0 c 153 0
-spi1 c 153 1
-spi2 c 153 2
-spi3 c 153 3
-mmcblk0 b 254 0
-mmcblk0p1 b 254 1
-mmcblk0p2 b 254 2
-mmcblk0p3 b 254 3
-mmcblk0p4 b 254 4
-sequencer c 14 1
-admmidi0 c 14 14
-admmidi1 c 14 30
-admmidi2 c 14 46
-admmidi3 c 14 62
-adsp0 c 14 12
-adsp1 c 14 28
-adsp2 c 14 44
-adsp3 c 14 60
-aloadC0 c 116 0
-aloadC1 c 116 32
-aloadC2 c 116 64
-aloadC3 c 116 96
-aloadSEQ c 116 1
-amidi0 c 14 13
-amidi1 c 14 29
-amidi2 c 14 45
-amidi3 c 14 61
-amixer0 c 14 11
-amixer1 c 14 27
-amixer2 c 14 43
-amixer3 c 14 59
-audio0 c 14 4
-audio1 c 14 20
-audio2 c 14 36
-audio3 c 14 52
-dmfm0 c 14 10
-dmfm1 c 14 26
-dmfm2 c 14 42
-dmfm3 c 14 58
-dmmidi0 c 14 9
-dmmidi1 c 14 25
-dmmidi2 c 14 41
-dmmidi3 c 14 57
-dsp0 c 14 3
-dsp1 c 14 19
-dsp2 c 14 35
-dsp3 c 14 51
-midi00 c 14 2
-midi01 c 14 18
-midi02 c 14 34
-midi03 c 14 50
-mixer0 c 14 0
-mixer1 c 14 18
-mixer2 c 14 34
-mixer3 c 14 48
-music c 14 8
-sndstat c 14 6

target/device/Atmel/atngw100-expanded/target_skeleton/etc/TZ

@@ -1 +0,0 @@
-CET1CDT

target/device/Atmel/atngw100-expanded/target_skeleton/etc/default/ntpdate

@@ -1,6 +0,0 @@
-# servers to check.   (Separate multiple servers with spaces.)
-NTPSERVERS="pool.ntp.org"
-#
-# additional options for ntpdate
-#NTPOPTIONS="-v"
-NTPOPTIONS="-u"

target/device/Atmel/atngw100-expanded/target_skeleton/etc/dnsmasq.conf

@@ -1,447 +0,0 @@
-# Configuration file for dnsmasq.
-#
-# Format is one option per line, legal options are the same
-# as the long options legal on the command line. See
-# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details.
-
-# The following two options make you a better netizen, since they
-# tell dnsmasq to filter out queries which the public DNS cannot
-# answer, and which load the servers (especially the root servers)
-# uneccessarily. If you have a dial-on-demand link they also stop
-# these requests from bringing up the link uneccessarily.
-
-# Never forward plain names (without a dot or domain part)
-domain-needed
-# Never forward addresses in the non-routed address spaces.
-bogus-priv
-
-
-# Uncomment this to filter useless windows-originated DNS requests
-# which can trigger dial-on-demand links needlessly.
-# Note that (amongst other things) this blocks all SRV requests,
-# so don't use it if you use eg Kerberos.
-# This option only affects forwarding, SRV records originating for
-# dnsmasq (via srv-host= lines) are not suppressed by it.
-#filterwin2k
-
-# Change this line if you want dns to get its upstream servers from
-# somewhere other that /etc/resolv.conf
-#resolv-file=
-
-# By  default,  dnsmasq  will  send queries to any of the upstream
-# servers it knows about and tries to favour servers to are  known
-# to  be  up.  Uncommenting this forces dnsmasq to try each query
-# with  each  server  strictly  in  the  order  they   appear   in
-# /etc/resolv.conf
-#strict-order
-
-# If you don't want dnsmasq to read /etc/resolv.conf or any other
-# file, getting its servers from this file instead (see below), then
-# uncomment this
-#no-resolv
-
-# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv
-# files for changes and re-read them then uncomment this.
-#no-poll
-
-# Add other name servers here, with domain specs if they are for
-# non-public domains.
-#server=/localnet/192.168.0.1
-
-# Add local-only domains here, queries in these domains are answered
-# from /etc/hosts or DHCP only.
-#local=/localnet/
-
-# Add domains which you want to force to an IP address here.
-# The example below send any host in doubleclick.net to a local
-# webserver.
-#address=/doubleclick.net/127.0.0.1
-
-# If you want dnsmasq to change uid and gid to something other
-# than the default, edit the following lines.
-user=dnsmasq
-#group=
-
-# If you want dnsmasq to listen for DHCP and DNS requests only on
-# specified interfaces (and the loopback) give the name of the
-# interface (eg eth0) here.
-# Repeat the line for more than one interface.
-interface=eth1
-# Or you can specify which interface _not_ to listen on
-except-interface=eth0
-# Or which to listen on by address (remember to include 127.0.0.1 if
-# you use this.)
-#listen-address=
-# If you want dnsmasq to provide only DNS service on an interface,
-# configure it as shown above, and then use the following line to
-# disable DHCP on it.
-#no-dhcp-interface=
-
-# On systems which support it, dnsmasq binds the wildcard address,
-# even when it is listening on only some interfaces. It then discards
-# requests that it shouldn't reply to. This has the advantage of
-# working even when interfaces come and go and change address. If you
-# want dnsmasq to really bind only the interfaces it is listening on,
-# uncomment this option. About the only time you may need this is when
-# running another nameserver on the same machine.
-#bind-interfaces
-
-# If you don't want dnsmasq to read /etc/hosts, uncomment the
-# following line.
-#no-hosts
-# or if you want it to read another file, as well as /etc/hosts, use
-# this.
-addn-hosts=/etc/hosts.dnsmasq
-
-# Set this (and domain: see below) if you want to have a domain
-# automatically added to simple names in a hosts-file.
-#expand-hosts
-
-# Set the domain for dnsmasq. this is optional, but if it is set, it
-# does the following things.
-# 1) Allows DHCP hosts to have fully qualified domain names, as long
-#     as the domain part matches this setting.
-# 2) Sets the "domain" DHCP option thereby potentially setting the
-#    domain of all systems configured by DHCP
-# 3) Provides the domain part for "expand-hosts"
-domain=example.net
-
-# Uncomment this to enable the integrated DHCP server, you need
-# to supply the range of addresses available for lease and optionally
-# a lease time. If you have more than one network, you will need to
-# repeat this for each network on which you want to supply DHCP
-# service.
-dhcp-range=10.0.0.20,10.0.0.254,72h
-
-# This is an example of a DHCP range where the netmask is given. This
-# is needed for networks we reach the dnsmasq DHCP server via a relay
-# agent. If you don't know what a DHCP relay agent is, you probably
-# don't need to worry about this.
-#dhcp-range=10.0.0.20,10.0.0.254,255.255.255.0,72h
-
-# This is an example of a DHCP range with a network-id, so that
-# some DHCP options may be set only for this network.
-#dhcp-range=red,192.168.0.50,192.168.0.150
-
-# Supply parameters for specified hosts using DHCP. There are lots
-# of valid alternatives, so we will give examples of each. Note that
-# IP addresses DO NOT have to be in the range given above, they just
-# need to be on the same network. The order of the parameters in these
-# do not matter, it's permissble to give name,adddress and MAC in any order
-
-# Always allocate the host with ethernet address 11:22:33:44:55:66
-# The IP address 192.168.0.60
-#dhcp-host=11:22:33:44:55:66,192.168.0.60
-
-# Always set the name of the host with hardware address
-# 11:22:33:44:55:66 to be "fred"
-#dhcp-host=11:22:33:44:55:66,fred
-
-# Always give the host with ethernet address 11:22:33:44:55:66
-# the name fred and IP address 192.168.0.60 and lease time 45 minutes
-#dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m
-
-# Give the machine which says it's name is "bert" IP address
-# 192.168.0.70 and an infinite lease
-#dhcp-host=bert,192.168.0.70,infinite
-
-# Always give the host with client identifier 01:02:02:04
-# the IP address 192.168.0.60
-#dhcp-host=id:01:02:02:04,192.168.0.60
-
-# Always give the host with client identifier "marjorie"
-# the IP address 192.168.0.60
-#dhcp-host=id:marjorie,192.168.0.60
-
-# Enable the address given for "judge" in /etc/hosts
-# to be given to a machine presenting the name "judge" when
-# it asks for a DHCP lease.
-#dhcp-host=judge
-
-# Never offer DHCP service to a machine whose ethernet
-# address is 11:22:33:44:55:66
-#dhcp-host=11:22:33:44:55:66,ignore
-
-# Ignore any client-id presented by the machine with ethernet
-# address 11:22:33:44:55:66. This is useful to prevent a machine
-# being treated differently when running under different OS's or
-# between PXE boot and OS boot.
-#dhcp-host=11:22:33:44:55:66,id:*
-
-# Send extra options which are tagged as "red" to
-# the machine with ethernet address 11:22:33:44:55:66
-#dhcp-host=11:22:33:44:55:66,net:red
-
-# Send extra options which are tagged as "red" to
-# any machine with ethernet address starting 11:22:33:
-#dhcp-host=11:22:33:*:*:*,net:red
-
-# Send extra options which are tagged as "red" to any machine whose
-# DHCP vendorclass string includes the substring "Linux"
-#dhcp-vendorclass=red,Linux
-
-# Send extra options which are tagged as "red" to any machine one
-# of whose DHCP userclass strings includes the substring "accounts"
-#dhcp-userclass=red,accounts
-
-# Send extra options which are tagged as "red" to any machine whose
-# MAC address matches the pattern.
-#dhcp-mac=red,00:60:8C:*:*:*
-
-# If this line is uncommented, dnsmasq will read /etc/ethers and act
-# on the ethernet-address/IP pairs found there just as if they had
-# been given as --dhcp-host options. Useful if you keep
-# MAC-address/host mappings there for other purposes.
-read-ethers
-
-# Send options to hosts which ask for a DHCP lease.
-# See RFC 2132 for details of available options.
-# Common options can be given to dnsmasq by name:
-# run "dnsmasq --help dhcp" to get a list.
-# Note that all the common settings, such as netmask and
-# broadcast address, DNS server and default route, are given
-# sane defaults by dnsmasq. You very likely will not need any
-# any dhcp-options. If you use Windows clients and Samba, there
-# are some options which are recommended, they are detailed at the
-# end of this section.
-# For reference, the common options are:
-# subnet mask - 1
-# default router - 3
-# DNS server - 6
-# broadcast address - 28
-
-# Override the default route supplied by dnsmasq, which assumes the
-# router is the same machine as the one running dnsmasq.
-#dhcp-option=3,1.2.3.4
-
-# Do the same thing, but using the option name
-#dhcp-option=option:router,1.2.3.4
-
-# Override the default route supplied by dnsmasq and send no default
-# route at all. Note that this only works for the options sent by
-# default (1, 3, 6, 12, 28) the same line will send a zero-length option
-# for all other option numbers.
-#dhcp-option=3
-
-# Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5
-#dhcp-option=option:ntp-server,192.168.0.4,10.10.0.5
-
-# Set the NTP time server address to be the same machine as
-# is running dnsmasq
-dhcp-option=42,0.0.0.0
-
-# Set the NIS domain name to "welly"
-#dhcp-option=40,welly
-
-# Set the default time-to-live to 50
-#dhcp-option=23,50
-
-# Set the "all subnets are local" flag
-#dhcp-option=27,1
-
-# Send the etherboot magic flag and then etherboot options (a string).
-#dhcp-option=128,e4:45:74:68:00:00
-#dhcp-option=129,NIC=eepro100
-
-# Specify an option which will only be sent to the "red" network
-# (see dhcp-range for the declaration of the "red" network)
-# Note that the net: part must precede the option: part.
-#dhcp-option = net:red, option:ntp-server, 192.168.1.1
-
-# The following DHCP options set up dnsmasq in the same way as is specified
-# for the ISC dhcpcd in
-# http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt
-# adapted for a typical dnsmasq installation where the host running
-# dnsmasq is also the host running samba.
-# you may want to uncomment them if you use Windows clients and Samba.
-dhcp-option=19,0           # option ip-forwarding off
-dhcp-option=44,0.0.0.0     # set netbios-over-TCP/IP nameserver(s) aka WINS server(s)
-dhcp-option=45,0.0.0.0     # netbios datagram distribution server
-dhcp-option=46,8           # netbios node type
-dhcp-option=47             # empty netbios scope.
-
-# Send RFC-3397 DNS domain search DHCP option. WARNING: Your DHCP client
-# probably doesn't support this......
-#dhcp-option=option:domain-search,eng.apple.com,marketing.apple.com
-
-# Send RFC-3442 classless static routes (note the netmask encoding)
-#dhcp-option=121,192.168.1.0/24,1.2.3.4,10.0.0.0/8,5.6.7.8
-
-# Send vendor-class specific options encapsulated in DHCP option 43.
-# The meaning of the options is defined by the vendor-class so
-# options are sent only when the client supplied vendor class
-# matches the class given here. (A substring match is OK, so "MSFT"
-# matches "MSFT" and "MSFT 5.0"). This example sets the
-# mtftp address to 0.0.0.0 for PXEClients.
-#dhcp-option=vendor:PXEClient,1,0.0.0.0
-
-# Send microsoft-specific option to tell windows to release the DHCP lease
-# when it shuts down. Note the "i" flag, to tell dnsmasq to send the
-# value as a four-byte integer - that's what microsoft wants. See
-# http://technet2.microsoft.com/WindowsServer/en/library/a70f1bb7-d2d4-49f0-96d6-4b7414ecfaae1033.mspx?mfr=true
-#dhcp-option=vendor:MSFT,2,1i
-
-# Send the Encapsulated-vendor-class ID needed by some configurations of
-# Etherboot to allow is to recognise the DHCP server.
-#dhcp-option=vendor:Etherboot,60,"Etherboot"
-
-# Send options to PXELinux. Note that we need to send the options even
-# though they don't appear in the parameter request list, so we need
-# to use dhcp-option-force here.
-# See http://syslinux.zytor.com/pxe.php#special for details.
-# Magic number - needed before anything else is recognised
-#dhcp-option-force=208,f1:00:74:7e
-# Configuration file name
-#dhcp-option-force=209,configs/common
-# Path prefix
-#dhcp-option-force=210,/tftpboot/pxelinux/files/
-# Reboot time. (Note 'i' to send 32-bit value)
-#dhcp-option-force=211,30i
-
-# Set the boot filename for BOOTP. You will only need
-# this is you want to boot machines over the network and you will need
-# a TFTP server; either dnsmasq's built in TFTP server or an
-# external one. (See below for how to enable the TFTP server.)
-#dhcp-boot=pxelinux.0
-
-# Enable dnsmasq's built-in TFTP server
-#enable-tftp
-
-# Set the root directory for files availble via FTP.
-#tftp-root=/var/ftpd
-
-# Make the TFTP server more secure: with this set, only files owned by
-# the user dnsmasq is running as will be send over the net.
-#tftp-secure
-
-# Set the boot file name only when the "red" tag is set.
-#dhcp-boot=net:red,pxelinux.red-net
-
-# An example of dhcp-boot with an external server: the name and IP
-# address of the server are given after the filename.
-#dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3
-
-# Set the limit on DHCP leases, the default is 150
-#dhcp-lease-max=150
-
-# The DHCP server needs somewhere on disk to keep its lease database.
-# This defaults to a sane location, but if you want to change it, use
-# the line below.
-dhcp-leasefile=/var/lib/misc/dnsmasq.leases
-
-# Set the DHCP server to authoritative mode. In this mode it will barge in
-# and take over the lease for any client which broadcasts on the network,
-# whether it has a record of the lease or not. This avoids long timeouts
-# when a machine wakes up on a new network. DO NOT enable this if there's
-# the slighest chance that you might end up accidentally configuring a DHCP
-# server for your campus/company accidentally. The ISC server uses the same
-# the same option, and this URL provides more information:
-# http://www.isc.org/index.pl?/sw/dhcp/authoritative.php
-dhcp-authoritative
-
-# Run an executable when a DHCP lease is created or destroyed.
-# The arguments sent to the script are "add" or "del",
-# then the MAC address, the IP address and finally the hostname
-# if there is one.
-#dhcp-script=/bin/echo
-
-# Set the cachesize here.
-#cache-size=150
-
-# If you want to disable negative caching, uncomment this.
-#no-negcache
-
-# Normally responses which come form /etc/hosts and the DHCP lease
-# file have Time-To-Live set as zero, which conventionally means
-# do not cache further. If you are happy to trade lower load on the
-# server for potentially stale date, you can set a time-to-live (in
-# seconds) here.
-#local-ttl=
-
-# If you want dnsmasq to detect attempts by Verisign to send queries
-# to unregistered .com and .net hosts to its sitefinder service and
-# have dnsmasq instead return the correct NXDOMAIN response, uncomment
-# this line. You can add similar lines to do the same for other
-# registries which have implemented wildcard A records.
-#bogus-nxdomain=64.94.110.11
-
-# If you want to fix up DNS results from upstream servers, use the
-# alias option. This only works for IPv4.
-# This alias makes a result of 1.2.3.4 appear as 5.6.7.8
-#alias=1.2.3.4,5.6.7.8
-# and this maps 1.2.3.x to 5.6.7.x
-#alias=1.2.3.0,5.6.7.0,255.255.255.0
-
-
-# Change these lines if you want dnsmasq to serve MX records.
-
-# Return an MX record named "maildomain.com" with target
-# servermachine.com and preference 50
-#mx-host=maildomain.com,servermachine.com,50
-
-# Set the default target for MX records created using the localmx option.
-#mx-target=servermachine.com
-
-# Return an MX record pointing to the mx-target for all local
-# machines.
-#localmx
-
-# Return an MX record pointing to itself for all local machines.
-#selfmx
-
-# Change the following lines if you want dnsmasq to serve SRV
-# records.  These are useful if you want to serve ldap requests for
-# Active Directory and other windows-originated DNS requests.
-# See RFC 2782.
-# You may add multiple srv-host lines.
-# The fields are <name>,<target>,<port>,<priority>,<weight>
-# If the domain part if missing from the name (so that is just has the
-# service and protocol sections) then the domain given by the domain=
-# config option is used. (Note that expand-hosts does not need to be
-# set for this to work.)
-
-# A SRV record sending LDAP for the example.com domain to
-# ldapserver.example.com port 289
-#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389
-
-# A SRV record sending LDAP for the example.com domain to
-# ldapserver.example.com port 289 (using domain=)
-#domain=example.com
-#srv-host=_ldap._tcp,ldapserver.example.com,389
-
-# Two SRV records for LDAP, each with different priorities
-#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,1
-#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,2
-
-# A SRV record indicating that there is no LDAP server for the domain
-# example.com
-#srv-host=_ldap._tcp.example.com
-
-# The following line shows how to make dnsmasq serve an arbitrary PTR
-# record. This is useful for DNS-SD. (Note that the
-# domain-name expansion done for SRV records _does_not
-# occur for PTR records.)
-#ptr-record=_http._tcp.dns-sd-services,"New Employee Page._http._tcp.dns-sd-services"
-
-# Change the following lines to enable dnsmasq to serve TXT records.
-# These are used for things like SPF and zeroconf. (Note that the
-# domain-name expansion done for SRV records _does_not
-# occur for TXT records.)
-
-#Example SPF.
-#txt-record=example.com,"v=spf1 a -all"
-
-#Example zeroconf
-#txt-record=_http._tcp.example.com,name=value,paper=A4
-
-
-# For debugging purposes, log each DNS query as it passes through
-# dnsmasq.
-#log-queries
-
-# Log lots of extra information about DHCP transactions.
-#log-dhcp
-
-# Include a another lot of configuration options.
-#conf-file=/etc/dnsmasq.more.conf
-#conf-dir=/etc/dnsmasq.d

target/device/Atmel/atngw100-expanded/target_skeleton/etc/fstab

@@ -1,14 +0,0 @@
-# device	mount point	type		options		dump	pass
-#/dev/mtdblock1	/		jffs2		defaults	1	1
-#/dev/mmcblk0p1	/		ext3		defaults	1	1
-/dev/mmcblk0p2  swap	swap		defaults    0   0
-/dev/mmcblk0p3  /mnt/sdcard vfat	defaults	0	0
-proc		/proc		proc		defaults	0	0
-sys			/sys		sysfs		defaults	0	0
-dev			/dev		tmpfs		defaults	0	0
-pts			/dev/pts	devpts		defaults	0	0
-run			/var/run	tmpfs		defaults	0	0
-log			/var/log	tmpfs		defaults	0	0
-samba		/var/lib/samba	tmpfs	defaults	0	0
-tmp			/tmp		tmpfs		defaults	0	0
-config		/config		configfs	defaults	0	0

target/device/Atmel/atngw100-expanded/target_skeleton/etc/group

@@ -1,20 +0,0 @@
-root::0:
-daemon:x:1:
-bin:x:2:
-sys:x:3:
-adm:x:4:
-tty:x:5:
-disk:x:6:
-kmem:x:9:
-wheel:x:10:root
-dialout:x:20:
-utmp:x:43:
-staff:x:50:
-www-data::51:
-ftp::52:
-haldaemon:x:68:
-dbus:x:81:
-audio::101:
-users::500:
-default::1000:
-nogroup::65534:

target/device/Atmel/atngw100-expanded/target_skeleton/etc/hostname

@@ -1 +0,0 @@
-ngw.example.net

target/device/Atmel/atngw100-expanded/target_skeleton/etc/hosts

@@ -1,11 +0,0 @@
-127.0.0.1   localhost.localdomain localhost
-10.0.0.1    ngw.example.net ngw
-
-# The following lines are desirable for IPv6 capable hosts
-::1     localhost
-::1     ip6-localhost ip6-loopback
-fe00::0 ip6-localnet
-ff00::0 ip6-mcastprefix
-ff02::1 ip6-allnodes
-ff02::2 ip6-allrouters
-ff02::3 ip6-allhosts

target/device/Atmel/atngw100-expanded/target_skeleton/etc/hosts.dnsmasq

@@ -1,246 +0,0 @@
-# Local server
-10.0.0.1 ngw.example.net
-10.0.0.1 hostmaster.example.net
-10.0.0.1 ftp.example.net
-10.0.0.1 ns.example.net
-10.0.0.1 ssh.example.net
-10.0.0.1 samba.example.net
-10.0.0.1 telnet.example.net
-10.0.0.1 www.example.net
-
-# DHCP pool
-10.0.0.20 dhcp-020.example.net
-10.0.0.21 dhcp-021.example.net
-10.0.0.22 dhcp-022.example.net
-10.0.0.23 dhcp-023.example.net
-10.0.0.24 dhcp-024.example.net
-10.0.0.25 dhcp-025.example.net
-10.0.0.26 dhcp-026.example.net
-10.0.0.27 dhcp-027.example.net
-10.0.0.28 dhcp-028.example.net
-10.0.0.29 dhcp-029.example.net
-10.0.0.30 dhcp-030.example.net
-10.0.0.31 dhcp-031.example.net
-10.0.0.32 dhcp-032.example.net
-10.0.0.33 dhcp-033.example.net
-10.0.0.34 dhcp-034.example.net
-10.0.0.35 dhcp-035.example.net
-10.0.0.36 dhcp-036.example.net
-10.0.0.37 dhcp-037.example.net
-10.0.0.38 dhcp-038.example.net
-10.0.0.39 dhcp-039.example.net
-10.0.0.40 dhcp-040.example.net
-10.0.0.41 dhcp-041.example.net
-10.0.0.42 dhcp-042.example.net
-10.0.0.43 dhcp-043.example.net
-10.0.0.44 dhcp-044.example.net
-10.0.0.45 dhcp-045.example.net
-10.0.0.46 dhcp-046.example.net
-10.0.0.47 dhcp-047.example.net
-10.0.0.48 dhcp-048.example.net
-10.0.0.49 dhcp-049.example.net
-10.0.0.50 dhcp-050.example.net
-10.0.0.51 dhcp-051.example.net
-10.0.0.52 dhcp-052.example.net
-10.0.0.53 dhcp-053.example.net
-10.0.0.54 dhcp-054.example.net
-10.0.0.55 dhcp-055.example.net
-10.0.0.56 dhcp-056.example.net
-10.0.0.57 dhcp-057.example.net
-10.0.0.58 dhcp-058.example.net
-10.0.0.59 dhcp-059.example.net
-10.0.0.60 dhcp-060.example.net
-10.0.0.61 dhcp-061.example.net
-10.0.0.62 dhcp-062.example.net
-10.0.0.63 dhcp-063.example.net
-10.0.0.64 dhcp-064.example.net
-10.0.0.65 dhcp-065.example.net
-10.0.0.66 dhcp-066.example.net
-10.0.0.67 dhcp-067.example.net
-10.0.0.68 dhcp-068.example.net
-10.0.0.69 dhcp-069.example.net
-10.0.0.70 dhcp-070.example.net
-10.0.0.71 dhcp-071.example.net
-10.0.0.72 dhcp-072.example.net
-10.0.0.73 dhcp-073.example.net
-10.0.0.74 dhcp-074.example.net
-10.0.0.75 dhcp-075.example.net
-10.0.0.76 dhcp-076.example.net
-10.0.0.77 dhcp-077.example.net
-10.0.0.78 dhcp-078.example.net
-10.0.0.79 dhcp-079.example.net
-10.0.0.80 dhcp-080.example.net
-10.0.0.81 dhcp-081.example.net
-10.0.0.82 dhcp-082.example.net
-10.0.0.83 dhcp-083.example.net
-10.0.0.84 dhcp-084.example.net
-10.0.0.85 dhcp-085.example.net
-10.0.0.86 dhcp-086.example.net
-10.0.0.87 dhcp-087.example.net
-10.0.0.88 dhcp-088.example.net
-10.0.0.89 dhcp-089.example.net
-10.0.0.90 dhcp-090.example.net
-10.0.0.91 dhcp-091.example.net
-10.0.0.92 dhcp-092.example.net
-10.0.0.93 dhcp-093.example.net
-10.0.0.94 dhcp-094.example.net
-10.0.0.95 dhcp-095.example.net
-10.0.0.96 dhcp-096.example.net
-10.0.0.97 dhcp-097.example.net
-10.0.0.98 dhcp-098.example.net
-10.0.0.99 dhcp-099.example.net
-10.0.0.100 dhcp-100.example.net
-10.0.0.101 dhcp-101.example.net
-10.0.0.102 dhcp-102.example.net
-10.0.0.103 dhcp-103.example.net
-10.0.0.104 dhcp-104.example.net
-10.0.0.105 dhcp-105.example.net
-10.0.0.106 dhcp-106.example.net
-10.0.0.107 dhcp-107.example.net
-10.0.0.108 dhcp-108.example.net
-10.0.0.109 dhcp-109.example.net
-10.0.0.110 dhcp-110.example.net
-10.0.0.111 dhcp-111.example.net
-10.0.0.112 dhcp-112.example.net
-10.0.0.113 dhcp-113.example.net
-10.0.0.114 dhcp-114.example.net
-10.0.0.115 dhcp-115.example.net
-10.0.0.116 dhcp-116.example.net
-10.0.0.117 dhcp-117.example.net
-10.0.0.118 dhcp-118.example.net
-10.0.0.119 dhcp-119.example.net
-10.0.0.120 dhcp-120.example.net
-10.0.0.121 dhcp-121.example.net
-10.0.0.122 dhcp-122.example.net
-10.0.0.123 dhcp-123.example.net
-10.0.0.124 dhcp-124.example.net
-10.0.0.125 dhcp-125.example.net
-10.0.0.126 dhcp-126.example.net
-10.0.0.127 dhcp-127.example.net
-10.0.0.128 dhcp-128.example.net
-10.0.0.129 dhcp-129.example.net
-10.0.0.130 dhcp-130.example.net
-10.0.0.131 dhcp-131.example.net
-10.0.0.132 dhcp-132.example.net
-10.0.0.133 dhcp-133.example.net
-10.0.0.134 dhcp-134.example.net
-10.0.0.135 dhcp-135.example.net
-10.0.0.136 dhcp-136.example.net
-10.0.0.137 dhcp-137.example.net
-10.0.0.138 dhcp-138.example.net
-10.0.0.139 dhcp-139.example.net
-10.0.0.140 dhcp-140.example.net
-10.0.0.141 dhcp-141.example.net
-10.0.0.142 dhcp-142.example.net
-10.0.0.143 dhcp-143.example.net
-10.0.0.144 dhcp-144.example.net
-10.0.0.145 dhcp-145.example.net
-10.0.0.146 dhcp-146.example.net
-10.0.0.147 dhcp-147.example.net
-10.0.0.148 dhcp-148.example.net
-10.0.0.149 dhcp-149.example.net
-10.0.0.150 dhcp-150.example.net
-10.0.0.151 dhcp-151.example.net
-10.0.0.152 dhcp-152.example.net
-10.0.0.153 dhcp-153.example.net
-10.0.0.154 dhcp-154.example.net
-10.0.0.155 dhcp-155.example.net
-10.0.0.156 dhcp-156.example.net
-10.0.0.157 dhcp-157.example.net
-10.0.0.158 dhcp-158.example.net
-10.0.0.159 dhcp-159.example.net
-10.0.0.160 dhcp-160.example.net
-10.0.0.161 dhcp-161.example.net
-10.0.0.162 dhcp-162.example.net
-10.0.0.163 dhcp-163.example.net
-10.0.0.164 dhcp-164.example.net
-10.0.0.165 dhcp-165.example.net
-10.0.0.166 dhcp-166.example.net
-10.0.0.167 dhcp-167.example.net
-10.0.0.168 dhcp-168.example.net
-10.0.0.169 dhcp-169.example.net
-10.0.0.170 dhcp-170.example.net
-10.0.0.171 dhcp-171.example.net
-10.0.0.172 dhcp-172.example.net
-10.0.0.173 dhcp-173.example.net
-10.0.0.174 dhcp-174.example.net
-10.0.0.175 dhcp-175.example.net
-10.0.0.176 dhcp-176.example.net
-10.0.0.177 dhcp-177.example.net
-10.0.0.178 dhcp-178.example.net
-10.0.0.179 dhcp-179.example.net
-10.0.0.180 dhcp-180.example.net
-10.0.0.181 dhcp-181.example.net
-10.0.0.182 dhcp-182.example.net
-10.0.0.183 dhcp-183.example.net
-10.0.0.184 dhcp-184.example.net
-10.0.0.185 dhcp-185.example.net
-10.0.0.186 dhcp-186.example.net
-10.0.0.187 dhcp-187.example.net
-10.0.0.188 dhcp-188.example.net
-10.0.0.189 dhcp-189.example.net
-10.0.0.190 dhcp-190.example.net
-10.0.0.191 dhcp-191.example.net
-10.0.0.192 dhcp-192.example.net
-10.0.0.193 dhcp-193.example.net
-10.0.0.194 dhcp-194.example.net
-10.0.0.195 dhcp-195.example.net
-10.0.0.196 dhcp-196.example.net
-10.0.0.197 dhcp-197.example.net
-10.0.0.198 dhcp-198.example.net
-10.0.0.199 dhcp-199.example.net
-10.0.0.200 dhcp-200.example.net
-10.0.0.201 dhcp-201.example.net
-10.0.0.202 dhcp-202.example.net
-10.0.0.203 dhcp-203.example.net
-10.0.0.204 dhcp-204.example.net
-10.0.0.205 dhcp-205.example.net
-10.0.0.206 dhcp-206.example.net
-10.0.0.207 dhcp-207.example.net
-10.0.0.208 dhcp-208.example.net
-10.0.0.209 dhcp-209.example.net
-10.0.0.210 dhcp-210.example.net
-10.0.0.211 dhcp-211.example.net
-10.0.0.212 dhcp-212.example.net
-10.0.0.213 dhcp-213.example.net
-10.0.0.214 dhcp-214.example.net
-10.0.0.215 dhcp-215.example.net
-10.0.0.216 dhcp-216.example.net
-10.0.0.217 dhcp-217.example.net
-10.0.0.218 dhcp-218.example.net
-10.0.0.219 dhcp-219.example.net
-10.0.0.220 dhcp-220.example.net
-10.0.0.221 dhcp-221.example.net
-10.0.0.222 dhcp-222.example.net
-10.0.0.223 dhcp-223.example.net
-10.0.0.224 dhcp-224.example.net
-10.0.0.225 dhcp-225.example.net
-10.0.0.226 dhcp-226.example.net
-10.0.0.227 dhcp-227.example.net
-10.0.0.228 dhcp-228.example.net
-10.0.0.229 dhcp-229.example.net
-10.0.0.230 dhcp-230.example.net
-10.0.0.231 dhcp-231.example.net
-10.0.0.232 dhcp-232.example.net
-10.0.0.233 dhcp-233.example.net
-10.0.0.234 dhcp-234.example.net
-10.0.0.235 dhcp-235.example.net
-10.0.0.236 dhcp-236.example.net
-10.0.0.237 dhcp-237.example.net
-10.0.0.238 dhcp-238.example.net
-10.0.0.239 dhcp-239.example.net
-10.0.0.240 dhcp-240.example.net
-10.0.0.241 dhcp-241.example.net
-10.0.0.242 dhcp-242.example.net
-10.0.0.243 dhcp-243.example.net
-10.0.0.244 dhcp-244.example.net
-10.0.0.245 dhcp-245.example.net
-10.0.0.246 dhcp-246.example.net
-10.0.0.247 dhcp-247.example.net
-10.0.0.248 dhcp-248.example.net
-10.0.0.249 dhcp-249.example.net
-10.0.0.250 dhcp-250.example.net
-10.0.0.251 dhcp-251.example.net
-10.0.0.252 dhcp-252.example.net
-10.0.0.253 dhcp-253.example.net
-10.0.0.254 dhcp-254.example.net

target/device/Atmel/atngw100-expanded/target_skeleton/etc/httpd.conf

@@ -1,2 +0,0 @@
-# Allow all trafic
-A: *

target/device/Atmel/atngw100-expanded/target_skeleton/etc/inetd.conf

@@ -1,3 +0,0 @@
-#netbios-ssn	stream	tcp nowait	root.root /usr/sbin/smbd smbd
-#netbios-ns	dgram	udp wait	root.root /usr/sbin/nmbd nmbd
-swat		stream	tcp nowait.400	root.root /usr/sbin/swat swat

target/device/Atmel/atngw100-expanded/target_skeleton/etc/init.d/K70sendsig

@@ -1 +0,0 @@
-#!/bin/sh

target/device/Atmel/atngw100-expanded/target_skeleton/etc/init.d/K80netfs

@@ -1 +0,0 @@
-#!/bin/sh

target/device/Atmel/atngw100-expanded/target_skeleton/etc/init.d/K85network

@@ -1,11 +0,0 @@
-#!/bin/sh
-
-IFDOWN=/sbin/ifdown
-
-echo -n "Stopping networking: "
-if ${IFDOWN} -a; then
-	echo "done"
-else
-	echo "failed"
-	exit 1
-fi

target/device/Atmel/atngw100-expanded/target_skeleton/etc/init.d/K90localfs

@@ -1 +0,0 @@
-#!/bin/sh

target/device/Atmel/atngw100-expanded/target_skeleton/etc/init.d/S00mountvirtfs

@@ -1,76 +0,0 @@
-#!/bin/sh
-
-MOUNT=/bin/mount
-MKDIR=/bin/mkdir
-
-retval=0
-
-mount_fs()
-{
-	if [ "$1" = "" -o "$2" = "" -o "$3" = "" ]; then
-		return;
-	fi
-
-	if [ "$4" = "" ]; then
-		if ! ${MOUNT} -t $3 $1 $2; then
-			echo "  mount $2 failed"
-			retval=1
-			return 1
-		else
-			echo "  $2 mounted"
-		fi
-	else
-		if ! ${MOUNT} -t $3 -o $4 $1 $2; then
-			echo "  mount $2 failed"
-			retval=1
-			return 1
-		else
-			echo "  $2 mounted"
-		fi
-	fi
-
-	return 0
-}
-
-mkdir_fs()
-{
-	if [ "$1" = "" ]; then
-		return;
-	fi
-
-	if ! ${MKDIR} $1; then
-		echo "  mkdir $1 failed"
-		retval=1
-		return 1
-	else
-		echo "  $1 directory made"
-	fi
-
-	return 0
-}
-
-echo "Mounting virtual filesystems:"
-
-mount_fs proc /proc proc
-mount_fs sys /sys sysfs
-
-if mount_fs dev /dev tmpfs "size=512k,mode=0755"; then
-	mkdir_fs /dev/pts
-	mount_fs pts /dev/pts devpts
-	mkdir_fs /dev/shm
-	# g_serial is not detected by mdev.
-	mknod /dev/ttygserial c 127 0
-	mknod /dev/ttyS0 c 4 64
-	mknod /dev/null c 1 3
-fi
-
-mount_fs config /config configfs
-mount_fs tmp /tmp tmpfs
-mount_fs run /var/run tmpfs
-mount_fs log /var/log tmpfs
-
-if [ $retval -ne 0 ]; then
-	echo "  WARNING: not able to mount all virtual file systems"
-fi
-
-exit $retval

target/device/Atmel/atngw100-expanded/target_skeleton/etc/init.d/S01hotplug

@@ -1,14 +0,0 @@
-#! /bin/sh
-
-echo -n "Setting up mdev: "
-set -e
-trap 'echo "failed"' EXIT
-/bin/ln -s /proc/self/fd /dev/fd
-/bin/ln -s /proc/self/fd/0 /dev/stdin
-/bin/ln -s /proc/self/fd/1 /dev/stdout
-/bin/ln -s /proc/self/fd/2 /dev/stderr
-/bin/ln -s /proc/kcore /dev/core
-/bin/echo /sbin/mdev > /proc/sys/kernel/hotplug
-/sbin/mdev -s
-trap - EXIT
-echo "done"

target/device/Atmel/atngw100-expanded/target_skeleton/etc/init.d/S02hostname

@@ -1,47 +0,0 @@
-#!/bin/sh
-
-PROGRAM=/bin/hostname
-
-echo -n "Setting hostname: "
-[ -x ${PROGRAM} ] || (echo "missing"; exit 0)
-
-if [ -f /etc/hostname ]; then
-	HOST="$(cat /etc/hostname)"
-else
-	HOST="localhost.localdomain"
-fi
-
-start() {
-	if ${PROGRAM} "${HOST}"; then
-		echo "'${HOST}'"
-	else
-		echo "failed"
-		exit 1
-	fi
-}
-
-stop() {
-	return 0
-}
-
-restart() {
-	stop
-	start
-}
-
-case "$1" in
-  start)
-        start
-        ;;
-  stop)
-        stop
-        ;;
-  restart|reload)
-        restart
-        ;;
-  *)
-        echo $"Usage: $0 {start|stop|restart}"
-        exit 1
-esac
-
-exit $?

target/device/Atmel/atngw100-expanded/target_skeleton/etc/init.d/S08syslog

@@ -1,24 +0,0 @@
-#!/bin/sh
-
-SYSLOGD=/sbin/syslogd
-
-echo -n "Starting syslogd: "
-if [ ! -x "${SYSLOGD}" ]; then
-	echo "missing"
-	exit 1
-fi
-
-if ${SYSLOGD}; then
-	echo "done"
-else
-	echo "failed"
-	exit 1
-fi
-
-echo -n "Log messages to syslog: "
-if echo 4 4 1 7 > /proc/sys/kernel/printk; then
-	echo "done"
-else
-	echo "failed"
-	exit 1
-fi

target/device/Atmel/atngw100-expanded/target_skeleton/etc/init.d/S09klog

@@ -1,16 +0,0 @@
-#!/bin/sh
-
-KLOGD=/sbin/klogd
-
-echo -n "Starting klogd: "
-if [ ! -x "${KLOGD}" ]; then
-	echo "missing"
-	exit 1
-fi
-
-if ${KLOGD}; then
-	echo "done"
-else
-	echo "failed"
-	exit 1
-fi

target/device/Atmel/atngw100-expanded/target_skeleton/etc/init.d/S10modules-init

@@ -1,21 +0,0 @@
-#!/bin/sh
-
-MODPROBE=/sbin/modprobe
-
-echo -n "Probing modules: "
-if [ ! -x "${MODPROBE}" -o ! -f "/etc/modules" ]; then
-	echo "missing"
-	exit 1
-else
-	echo
-fi
-
-grep '^[^#]' "/etc/modules" | \
-while read module args; do
-	[ "$module" ] || continue
-	if ${MODPROBE} $module $args; then
-		echo "  $module loaded"
-	else
-		echo "  $module failed"
-	fi
-done

target/device/Atmel/atngw100-expanded/target_skeleton/etc/init.d/S20network

@@ -1,11 +0,0 @@
-#! /bin/sh
-
-IFUP=/sbin/ifup
-
-echo -n "Network interfaces: "
-if ${IFUP} -a; then
-	echo "done"
-else
-	echo "failed"
-	exit 1
-fi

target/device/Atmel/atngw100-expanded/target_skeleton/etc/init.d/S41inetd

@@ -1,16 +0,0 @@
-#!/bin/sh
-
-INETD=/usr/sbin/inetd
-
-echo -n "Starting inetd: "
-if [ ! -x "${INETD}" ]; then
-	echo "missing"
-	exit 1
-fi
-
-if ${INETD}; then
-	echo "done"
-else
-	echo "failed"
-	exit 1
-fi

target/device/Atmel/atngw100-expanded/target_skeleton/etc/init.d/S42httpd

@@ -1,16 +0,0 @@
-#!/bin/sh
-
-HTTPD=/usr/sbin/httpd
-
-echo -n "Starting httpd: "
-if [ ! -x "${HTTPD}" ]; then
-	echo "missing"
-	exit 1
-fi
-
-if ${HTTPD} -h /www; then
-	echo "done"
-else
-	echo "failed"
-	exit 1
-fi

target/device/Atmel/atngw100-expanded/target_skeleton/etc/init.d/S43ntp

@@ -1,27 +0,0 @@
-#!/bin/sh
-
-NTPDATE=/usr/bin/ntpdate
-
-if [ -f /etc/default/ntpdate ]; then
-    . /etc/default/ntpdate
-else
-	echo "WARNING: missing /etc/default/ntpdate"
-	exit 1
-fi
-
-echo -n "Starting ntpdate: "
-if [ ! -x ${NTPDATE} ]; then
-	echo "missing"
-	echo -n "  WARNING: could not syncronize clock, "
-	echo "edit NTPSERVERS in /etc/default/ntpdate."
-	exit 1
-fi
-
-if ${NTPDATE} $NTPOPTIONS $NTPSERVERS; then
-	echo "done"
-else
-	echo "failed"
-	echo -n "  WARNING: could not syncronize clock, "
-	echo "edit NTPSERVERS in /etc/default/ntpdate."
-	exit 1
-fi

target/device/Atmel/atngw100-expanded/target_skeleton/etc/init.d/S49netfs

@@ -1,11 +0,0 @@
-#!/bin/sh
-
-MOUNT=/bin/mount
-
-echo -n "Mounting remote filesystems: "
-if ${MOUNT} -t nfs -a; then
-	echo "done"
-else
-	echo "failed"
-	exit 1
-fi

target/device/Atmel/atngw100-expanded/target_skeleton/etc/init.d/S90firstboot

@@ -1,21 +0,0 @@
-#!/bin/sh
-
-if [ -e /etc/.firstboot ]; then
-	exit 0
-fi
-
-FC_CACHE=`which fc-cache`
-PANGO_QUERY_MODULES=`which pango-querymodules`
-GTK_QUERY_IMMODULES=`which gtk-query-immodules-2.0`
-GDK_PIXBUF_QUERYLOADERS=`which gdk-pixbuf-query-loaders`
-
-echo "Running first-boot configuration."
-echo "This may take a minute."
-
- 
-${FC_CACHE} -v
-${PANGO_QUERY_MODULES} > /etc/pango/pango.modules
-${GTK_QUERY_IMMODULES} > /etc/gtk-2.0/gtk.immodules
-${GDK_PIXBUF_QUERYLOADERS} > /etc/gtk-2.0/gdk-pixbuf.loaders
-
-touch /etc/.firstboot

target/device/Atmel/atngw100-expanded/target_skeleton/etc/init.d/rcK

@@ -1,6 +0,0 @@
-#!/bin/sh
-
-echo "Shutting down ..."
-for k in /etc/init.d/K*; do
-	$k stop
-done

target/device/Atmel/atngw100-expanded/target_skeleton/etc/init.d/rcS

@@ -1,11 +0,0 @@
-#!/bin/sh
-
-for s in /etc/init.d/S*; do
-	if [ -x $s ]; then
-		$s start
-	fi
-done
-
-echo
-echo "NGW100 ready"
-echo

target/device/Atmel/atngw100-expanded/target_skeleton/etc/inittab

@@ -1,27 +0,0 @@
-# Inittab for the ATNGW100 development board
-#
-# Note: BusyBox init doesn't support runlevels.  The runlevels field is
-# completely ignored by BusyBox init. If you want runlevels, use sysvinit.
-#
-# Format for each entry: <id>:<runlevels>:<action>:<process>
-#
-# id        == tty to run on, or empty for /dev/console
-# runlevels == ignored
-# action    == one of sysinit, respawn, askfirst, wait, and once
-# process   == program to run
-
-# Run the rcS script after kernel is booted.
-::sysinit:/etc/init.d/rcS
-
-# Run a shell on the first serial port. Comment out if you want a getty instead.
-ttyS0::respawn:-/bin/sh
-
-# Run a shell on the g_serial port (USB gadget device)? This shell will spawn
-# error message if the device is not connected.
-#ttygserial::respawn:-/bin/sh
-
-# Uncomment this to run a getty on the first serial port.
-#ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100
-
-# Run a script on shutdown.
-::shutdown:/etc/init.d/rcK

target/device/Atmel/atngw100-expanded/target_skeleton/etc/modules

@@ -1,13 +0,0 @@
-snd-atmel-ac97
-snd-pcm-oss
-snd-mixer-oss
-
-g_file_storage file=/dev/mmcblk0p3 removable=1
-
-
-# Uncomment g_file_storage to add mass-storage on USB
-#
-# WARNING: Remember to unmount the SD-card before probing g_file_storage.
-#          Failing to unmount before probing g_file_storage can corrupt
-#          your SD-card when accessed through the USB.
-#g_file_storage file=/dev/mmcblk0p1 removable=1

target/device/Atmel/atngw100-expanded/target_skeleton/etc/mtab

@@ -1 +0,0 @@
-../proc/mounts

target/device/Atmel/atngw100-expanded/target_skeleton/etc/network/interfaces

@@ -1,8 +0,0 @@
-# Configure Loopback
-auto lo
-iface lo inet loopback
-
-# Configure Ethernet 0
-auto eth0
-iface eth0 inet dhcp
-

target/device/Atmel/atngw100-expanded/target_skeleton/etc/ntp.conf

@@ -1,49 +0,0 @@
-# /etc/ntp.conf, configuration for ntpd
-
-# ntpd will use syslog() if logfile is not defined
-#logfile /var/log/ntpd
-
-driftfile /var/lib/ntp/ntp.drift
-statsdir /var/log/
-
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
-
-# You do need to talk to an NTP server or two (or three).
-#server ntp.your-provider.example
-
-# pool.ntp.org maps to more than 100 low-stratum NTP servers.
-# Your server will pick a different set every time it starts up.
-#  *** Please consider joining the pool! ***
-#  ***  <http://www.pool.ntp.org/#join>  ***
-server pool.ntp.org
-server pool.ntp.org
-
-# ... and use the local system clock as a reference if all else fails
-# NOTE: in a local network, set the local stratum of *one* stable server
-# to 10; otherwise your clocks will drift apart if you lose connectivity.
-server 127.127.1.0
-fudge 127.127.1.0 stratum 13
-
-# By default, exchange time with everybody, but don't allow configuration.
-# See /usr/share/doc/ntp-doc/html/accopt.html for details.
-restrict default kod notrap nomodify nopeer noquery
-
-# Local users may interrogate the ntp server more closely.
-restrict 127.0.0.1 nomodify
-
-# Clients from this (example!) subnet have unlimited access,
-# but only if cryptographically authenticated
-restrict 10.0.0.0 mask 255.255.255.0 notrust
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-broadcast 10.0.0.255
-
-# If you want to listen to time broadcasts on your local subnet,
-# de-comment the next lines. Please do this only if you trust everybody
-# on the network!
-#disable auth
-#broadcastclient

target/device/Atmel/atngw100-expanded/target_skeleton/etc/passwd

@@ -1,18 +0,0 @@
-root:x:0:0:root:/:/bin/sh
-daemon:x:1:1:daemon:/usr/sbin:/bin/sh
-bin:x:2:2:bin:/bin:/bin/sh
-sys:x:3:3:sys:/dev:/bin/sh
-sync:x:4:100:sync:/bin:/bin/sync
-mail:x:8:8:mail:/var/spool/mail:/bin/sh
-proxy:x:13:13:proxy:/bin:/bin/sh
-www-data:x:33:33:www-data:/var/www:/bin/sh
-backup:x:34:34:backup:/var/backups:/bin/sh
-operator:x:37:37:Operator:/var:/bin/sh
-haldaemon:x:68:68:hald:/:/bin/sh
-dbus:x:81:81:dbus:/var/run/dbus:/bin/sh
-ftp:x:50:50:Anonymous FTP user:/home/ftp:/bin/ash
-dnsmasq:x:52:52:dnsmasq:/var/lib/dnsmasq:/bin/false
-sshd:x:110:65534:Operator:/var/run/sshd:/bin/false
-nobody:x:65534:65534:nobody:/nonexistent:/bin/false
-avr32:x:500:500:Linux User,,,:/home/avr32:/bin/sh
-default:x:1000:1000:Default non-root user:/home/default:/bin/sh

target/device/Atmel/atngw100-expanded/target_skeleton/etc/proftpd.conf

@@ -1,31 +0,0 @@
-ServerName			"ATNGW100 FTP server"
-ServerType			standalone
-DefaultServer			on
-
-# Port 21 is the standard FTP port.
-Port				21
-
-# Umask 022 is a good standard umask to prevent new dirs and files
-# from being group and world writable.
-Umask				022
-
-# Note that this ONLY works in standalone mode, in inetd mode you should use an
-# inetd server that allows you to limit maximum number of processes per service
-# (such as inetd).
-MaxInstances			5
-
-# Set the user and group under which the server will run.
-User				nobody
-Group				nogroup
-
-# To cause every FTP user to be "jailed" (chrooted) into their home
-# directory, uncomment this line.
-#DefaultRoot ~
-
-# Normally, we want files to be overwriteable.
-AllowOverwrite		on
-
-# Deny use of SITE CHMOD, uncomment the three lines below.
-#<Limit SITE_CHMOD>
-#  DenyAll
-#</Limit>

target/device/Atmel/atngw100-expanded/target_skeleton/etc/protocols

@@ -1,149 +0,0 @@
-# /etc/protocols:
-# $Id: protocols,v 1.3 2001/07/07 07:07:15 nalin Exp $
-#
-# Internet (IP) protocols
-#
-#	from: @(#)protocols	5.1 (Berkeley) 4/17/89
-#
-# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
-#
-# See also http://www.iana.org/assignments/protocol-numbers
-
-ip	0	IP		# internet protocol, pseudo protocol number
-#hopopt	0	HOPOPT		# hop-by-hop options for ipv6
-icmp	1	ICMP		# internet control message protocol
-igmp	2	IGMP		# internet group management protocol
-ggp	3	GGP		# gateway-gateway protocol
-ipencap	4	IP-ENCAP	# IP encapsulated in IP (officially ``IP'')
-st	5	ST		# ST datagram mode
-tcp	6	TCP		# transmission control protocol
-cbt	7	CBT		# CBT, Tony Ballardie <A.Ballardie@cs.ucl.ac.uk>
-egp	8	EGP		# exterior gateway protocol
-igp	9	IGP		# any private interior gateway (Cisco: for IGRP)
-bbn-rcc	10	BBN-RCC-MON	# BBN RCC Monitoring
-nvp	11	NVP-II		# Network Voice Protocol
-pup	12	PUP		# PARC universal packet protocol
-argus	13	ARGUS		# ARGUS
-emcon	14	EMCON		# EMCON
-xnet	15	XNET		# Cross Net Debugger
-chaos	16	CHAOS		# Chaos
-udp	17	UDP		# user datagram protocol
-mux	18	MUX		# Multiplexing protocol
-dcn	19	DCN-MEAS	# DCN Measurement Subsystems
-hmp	20	HMP		# host monitoring protocol
-prm	21	PRM		# packet radio measurement protocol
-xns-idp	22	XNS-IDP		# Xerox NS IDP
-trunk-1	23	TRUNK-1		# Trunk-1
-trunk-2	24	TRUNK-2		# Trunk-2
-leaf-1	25	LEAF-1		# Leaf-1
-leaf-2	26	LEAF-2		# Leaf-2
-rdp	27	RDP		# "reliable datagram" protocol
-irtp	28	IRTP		# Internet Reliable Transaction Protocol
-iso-tp4	29	ISO-TP4		# ISO Transport Protocol Class 4
-netblt	30	NETBLT		# Bulk Data Transfer Protocol
-mfe-nsp	31	MFE-NSP		# MFE Network Services Protocol
-merit-inp	32	MERIT-INP	# MERIT Internodal Protocol
-sep	33	SEP		# Sequential Exchange Protocol
-3pc	34	3PC		# Third Party Connect Protocol
-idpr	35	IDPR		# Inter-Domain Policy Routing Protocol
-xtp	36	XTP		# Xpress Tranfer Protocol
-ddp	37	DDP		# Datagram Delivery Protocol
-idpr-cmtp	38	IDPR-CMTP	# IDPR Control Message Transport Proto
-tp++	39	TP++		# TP++ Transport Protocol
-il	40	IL		# IL Transport Protocol
-ipv6	41	IPv6		# IPv6
-sdrp	42	SDRP		# Source Demand Routing Protocol
-ipv6-route	43	IPv6-Route 	# Routing Header for IPv6
-ipv6-frag	44	IPv6-Frag	# Fragment Header for IPv6
-idrp	45	IDRP		# Inter-Domain Routing Protocol
-rsvp	46	RSVP		# Resource ReSerVation Protocol
-gre	47	GRE		# Generic Routing Encapsulation
-mhrp	48	MHRP		# Mobile Host Routing Protocol
-bna	49	BNA		# BNA
-ipv6-crypt	50	IPv6-Crypt	# Encryption Header for IPv6
-ipv6-auth	51	IPv6-Auth	# Authentication Header for IPv6
-i-nlsp	52	I-NLSP		# Integrated Net Layer Security TUBA
-swipe	53	SWIPE		# IP with Encryption
-narp	54	NARP		# NBMA Address Resolution Protocol
-mobile	55	MOBILE		# IP Mobility
-tlsp	56	TLSP		# Transport Layer Security Protocol
-skip	57	SKIP		# SKIP
-ipv6-icmp	58	IPv6-ICMP	# ICMP for IPv6
-ipv6-nonxt	59	IPv6-NoNxt	# No Next Header for IPv6
-ipv6-opts	60	IPv6-Opts	# Destination Options for IPv6
-#	61			# any host internal protocol
-cftp	62	CFTP		# CFTP
-#	63			# any local network
-sat-expak	64	SAT-EXPAK	# SATNET and Backroom EXPAK
-kryptolan	65	KRYPTOLAN	# Kryptolan
-rvd	66	RVD		# MIT Remote Virtual Disk Protocol
-ippc	67	IPPC		# Internet Pluribus Packet Core
-#	68			# any distributed file system
-sat-mon	69	SAT-MON		# SATNET Monitoring
-visa	70	VISA		# VISA Protocol
-ipcv	71	IPCV		# Internet Packet Core Utility
-cpnx	72	CPNX		# Computer Protocol Network Executive
-cphb	73	CPHB		# Computer Protocol Heart Beat
-wsn	74	WSN		# Wang Span Network
-pvp	75	PVP		# Packet Video Protocol
-br-sat-mon	76	BR-SAT-MON	# Backroom SATNET Monitoring
-sun-nd	77	SUN-ND		# SUN ND PROTOCOL-Temporary
-wb-mon	78	WB-MON		# WIDEBAND Monitoring
-wb-expak	79	WB-EXPAK	# WIDEBAND EXPAK
-iso-ip	80	ISO-IP		# ISO Internet Protocol
-vmtp	81	VMTP		# Versatile Message Transport
-secure-vmtp	82	SECURE-VMTP	# SECURE-VMTP
-vines	83	VINES		# VINES
-ttp	84	TTP		# TTP
-nsfnet-igp	85	NSFNET-IGP	# NSFNET-IGP
-dgp	86	DGP		# Dissimilar Gateway Protocol
-tcf	87	TCF		# TCF
-eigrp	88	EIGRP		# Enhanced Interior Routing Protocol (Cisco)
-ospf	89	OSPFIGP		# Open Shortest Path First IGP
-sprite-rpc	90	Sprite-RPC	# Sprite RPC Protocol
-larp	91	LARP		# Locus Address Resolution Protocol
-mtp	92	MTP		# Multicast Transport Protocol
-ax.25	93	AX.25		# AX.25 Frames
-ipip	94	IPIP		# Yet Another IP encapsulation
-micp	95	MICP		# Mobile Internetworking Control Pro.
-scc-sp	96	SCC-SP		# Semaphore Communications Sec. Pro.
-etherip	97	ETHERIP		# Ethernet-within-IP Encapsulation
-encap	98	ENCAP		# Yet Another IP encapsulation
-#	99			# any private encryption scheme
-gmtp	100	GMTP		# GMTP
-ifmp	101	IFMP		# Ipsilon Flow Management Protocol
-pnni	102	PNNI		# PNNI over IP
-pim	103	PIM		# Protocol Independent Multicast
-aris	104	ARIS		# ARIS
-scps	105	SCPS		# SCPS
-qnx	106	QNX		# QNX
-a/n	107	A/N		# Active Networks
-ipcomp	108	IPComp		# IP Payload Compression Protocol
-snp	109	SNP		# Sitara Networks Protocol
-compaq-peer	110	Compaq-Peer	# Compaq Peer Protocol
-ipx-in-ip	111	IPX-in-IP	# IPX in IP
-vrrp	112	VRRP		# Virtual Router Redundancy Protocol
-pgm	113	PGM		# PGM Reliable Transport Protocol
-#	114			# any 0-hop protocol
-l2tp	115	L2TP		# Layer Two Tunneling Protocol
-ddx	116	DDX		# D-II Data Exchange
-iatp	117	IATP		# Interactive Agent Transfer Protocol
-stp	118	STP		# Schedule Transfer
-srp	119	SRP		# SpectraLink Radio Protocol
-uti	120	UTI		# UTI
-smp	121	SMP		# Simple Message Protocol
-sm	122	SM		# SM
-ptp	123	PTP		# Performance Transparency Protocol
-isis	124	ISIS		# ISIS over IPv4
-fire	125	FIRE
-crtp	126	CRTP		# Combat Radio Transport Protocol
-crdup	127	CRUDP		# Combat Radio User Datagram
-sscopmce	128	SSCOPMCE
-iplt	129	IPLT
-sps	130	SPS		# Secure Packet Shield
-pipe	131	PIPE		# Private IP Encapsulation within IP
-sctp	132	SCTP		# Stream Control Transmission Protocol
-fc	133	FC		# Fibre Channel
-# rsvp-e2e-ignore	134	RSVP-E2E-IGNORE
-#	134-254			# Unassigned
-#	255			# Reserved

target/device/Atmel/atngw100-expanded/target_skeleton/etc/resolv.conf

@@ -1 +0,0 @@
-../tmp/resolv.conf

target/device/Atmel/atngw100-expanded/target_skeleton/etc/samba/smb.conf

@@ -1,287 +0,0 @@
-# This is the main Samba configuration file. You should read the
-# smb.conf(5) manual page in order to understand the options listed
-# here. Samba has a huge number of configurable options (perhaps too
-# many!) most of which are not shown in this example
-#
-# For a step to step guide on installing, configuring and using samba,
-# read the Samba-HOWTO-Collection. This may be obtained from:
-#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
-#
-# Many working examples of smb.conf files can be found in the
-# Samba-Guide which is generated daily and can be downloaded from:
-#  http://www.samba.org/samba/docs/Samba-Guide.pdf
-#
-# Any line which starts with a ; (semi-colon) or a # (hash)
-# is a comment and is ignored. In this example we will use a #
-# for commentry and a ; for parts of the config file that you
-# may wish to enable
-#
-# NOTE: Whenever you modify this file you should run the command "testparm"
-# to check that you have not made any basic syntactic errors.
-#
-#======================= Global Settings =====================================
-[global]
-
-# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
-   workgroup = AVR32
-
-# Network name
-   netbios name = ngw100
-
-# server string is the equivalent of the NT Description field
-   server string = AVR32 NGW100 development kit
-
-# Security mode. Defines in which mode Samba will operate. Possible
-# values are share, user, server, domain and ads. Most people will want
-# user level security. See the Samba-HOWTO-Collection for details.
-   security = user
-
-# This option is important for security. It allows you to restrict
-# connections to machines which are on your local network. The
-# following example restricts access to two C class networks and
-# the "loopback" interface. For more examples of the syntax see
-# the smb.conf man page
-   hosts allow = 10.0.0. 127.
-
-# If you want to automatically load your printer list rather
-# than setting them up individually then you'll need this
-   load printers = no
-
-# you may wish to override the location of the printcap file
-;   printcap name = /etc/printcap
-
-# on SystemV system setting printcap name to lpstat should allow
-# you to automatically obtain a printer list from the SystemV spool
-# system
-;   printcap name = lpstat
-
-# It should not be necessary to specify the print system type unless
-# it is non-standard. Currently supported print systems include:
-# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
-;   printing = cups
-
-# Uncomment this if you want a guest account, you must add this to /etc/passwd
-# otherwise the user "nobody" is used
-;  guest account = pcguest
-
-# this tells Samba to use a separate log file for each machine
-# that connects
-   log file = /var/log/samba/log.%m
-   debug level = 1
-   syslog = 0
-
-# Put a capping on the size of the log files (in Kb).
-   max log size = 1000
-
-# Use password server option only with security = server
-# The argument list may include:
-#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
-# or to auto-locate the domain controller/s
-#   password server = *
-;   password server = <NT-Server-Name>
-
-# Use the realm option only with security = ads
-# Specifies the Active Directory realm the host is part of
-;   realm = MY_REALM
-
-# Backend to store user information in. New installations should
-# use either tdbsam or ldapsam. smbpasswd is available for backwards
-# compatibility. tdbsam requires no further configuration.
-   passdb backend = smbpasswd:/etc/samba/smbpasswd
-
-# Using the following line enables you to customise your configuration
-# on a per machine basis. The %m gets replaced with the netbios name
-# of the machine that is connecting.
-# Note: Consider carefully the location in the configuration file of
-#       this line.  The included file is read at that point.
-;   include = /usr/local/samba/lib/smb.conf.%m
-
-# Configure Samba to use multiple interfaces
-# If you have multiple network interfaces then you must list them
-# here. See the man page for details.
-   interfaces = lo eth1
-
-   socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
-
-# Browser Control Options:
-# set local master to no if you don't want Samba to become a master
-# browser on your network. Otherwise the normal election rules apply
-   local master = yes
-
-# OS Level determines the precedence of this server in master browser
-# elections. The default value should be reasonable
-   os level = 254
-
-# Domain Master specifies Samba to be the Domain Master Browser. This
-# allows Samba to collate browse lists between subnets. Don't use this
-# if you already have a Windows NT domain controller doing this job
-   domain master = yes
-
-# Preferred Master causes Samba to force a local browser election on startup
-# and gives it a slightly higher chance of winning the election
-   preferred master = yes
-
-# Enable this if you want Samba to be a domain logon server for
-# Windows95 workstations.
-;   domain logons = yes
-
-# if you enable domain logons then you may want a per-machine or
-# per user logon script
-# run a specific logon batch file per workstation (machine)
-;   logon script = %m.bat
-# run a specific logon batch file per username
-;   logon script = %U.bat
-
-# Where to store roving profiles (only for Win95 and WinNT)
-#        %L substitutes for this servers netbios name, %U is username
-#        You must uncomment the [Profiles] share below
-;   logon path = \\%L\Profiles\%U
-
-# Windows Internet Name Serving Support Section:
-# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
-;   wins support = yes
-
-# WINS Server - Tells the NMBD components of Samba to be a WINS Client
-#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
-;   wins server = w.x.y.z
-
-# WINS Proxy - Tells Samba to answer name resolution queries on
-# behalf of a non WINS capable client, for this to work there must be
-# at least one	WINS Server on the network. The default is NO.
-;   wins proxy = yes
-
-# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
-# via DNS nslookups. The default is NO.
-   dns proxy = no
-
-# These scripts are used on a domain controller or stand-alone
-# machine to add or delete corresponding unix accounts
-;  add user script = /usr/sbin/useradd %u
-;  add group script = /usr/sbin/groupadd %g
-;  add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
-;  delete user script = /usr/sbin/userdel %u
-;  delete user from group script = /usr/sbin/deluser %u %g
-;  delete group script = /usr/sbin/groupdel %g
-
-# Unix charset on the filesystem
-   unix charset = iso8859-1
-
-# Code page for the client
-#   client code page = 850
-
-#============================ Share Definitions ==============================
-[homes]
-   comment = Home Directories
-   browseable = no
-   writable = yes
-
-[netdisk]
-   comment = Network share on STK1000
-   path = /media
-   read only = no
-   public = yes
-
-# Un-comment the following and create the netlogon directory for Domain Logons
-; [netlogon]
-;   comment = Network Logon Service
-;   path = /usr/local/samba/lib/netlogon
-;   guest ok = yes
-;   writable = no
-;   share modes = no
-
-
-# Un-comment the following to provide a specific roving profile share
-# the default is to use the user's home directory
-;[Profiles]
-;    path = /usr/local/samba/profiles
-;    browseable = no
-;    guest ok = yes
-
-
-# NOTE: If you have a BSD-style print system there is no need to
-# specifically define each individual printer
-;[printers]
-;   comment = All Printers
-;   path = /usr/spool/samba
-;   browseable = no
-# Set public = yes to allow user 'guest account' to print
-;   guest ok = no
-;   writable = no
-;   printable = yes
-
-# This one is useful for people to share files
-;[tmp]
-;   comment = Temporary file space
-;   path = /tmp
-;   read only = no
-;   public = yes
-
-# A publicly accessible directory, but read only, except for people in
-# the "staff" group
-;[public]
-;   comment = Public Stuff
-;   path = /home/samba
-;   public = yes
-;   writable = yes
-;   printable = no
-;   write list = @staff
-
-# Other examples.
-#
-# A private printer, usable only by fred. Spool data will be placed in fred's
-# home directory. Note that fred must have write access to the spool directory,
-# wherever it is.
-;[fredsprn]
-;   comment = Fred's Printer
-;   valid users = fred
-;   path = /homes/fred
-;   printer = freds_printer
-;   public = no
-;   writable = no
-;   printable = yes
-
-# A private directory, usable only by fred. Note that fred requires write
-# access to the directory.
-;[fredsdir]
-;   comment = Fred's Service
-;   path = /usr/somewhere/private
-;   valid users = fred
-;   public = no
-;   writable = yes
-;   printable = no
-
-# a service which has a different directory for each machine that connects
-# this allows you to tailor configurations to incoming machines. You could
-# also use the %U option to tailor it by user name.
-# The %m gets replaced with the machine name that is connecting.
-;[pchome]
-;  comment = PC Directories
-;  path = /usr/pc/%m
-;  public = no
-;  writable = yes
-
-# A publicly accessible directory, read/write to all users. Note that all files
-# created in the directory by users will be owned by the default user, so
-# any user with access can delete any other user's files. Obviously this
-# directory must be writable by the default user. Another user could of course
-# be specified, in which case all files would be owned by that user instead.
-;[public]
-;   path = /usr/somewhere/else/public
-;   public = yes
-;   only guest = yes
-;   writable = yes
-;   printable = no
-
-# The following two entries demonstrate how to share a directory so that two
-# users can place files there that will be owned by the specific users. In this
-# setup, the directory should be writable by both users and should have the
-# sticky bit set on it to prevent abuse. Obviously this could be extended to
-# as many users as required.
-;[myshare]
-;   comment = Mary's and Fred's stuff
-;   path = /usr/somewhere/shared
-;   valid users = mary fred
-;   public = no
-;   writable = yes
-;   printable = no
-;   create mask = 0765

target/device/Atmel/atngw100-expanded/target_skeleton/etc/samba/smbpasswd

@@ -1 +0,0 @@
-root:0:172DC9BBE870E1B6AAD3B435B51404EE:090A846DE05FDBC2D90864D49620FD7C:[U          ]:LCT-4561C217:

target/device/Atmel/atngw100-expanded/target_skeleton/etc/shadow

@@ -1,18 +0,0 @@
-root:$1$OJeedGT3$uG0eWkNhkeq0WO6Wldk1Y.:13200:0:99999:7:::
-daemon:!:13200:0:99999:7:::
-bin:!:13200:0:99999:7:::
-sys:!:13200:0:99999:7:::
-sync:!:13200:0:99999:7:::
-mail:!:13200:0:99999:7:::
-proxy:!:13200:0:99999:7:::
-www-data:!:13200:0:99999:7:::
-backup:!:13200:0:99999:7:::
-operator:!:13200:0:99999:7:::
-haldaemon:!:13200:0:99999:7:::
-dbus:!:13200:0:99999:7:::
-ftp:!:13200:0:99999:7:::
-dnsmasq:!:13200:0:99999:7:::
-sshd:!:13200:0:99999:7:::
-nobody:!:13200:0:99999:7:::
-avr32:$1$TVWxUVs7$/ze18sFeD6F26w0hgyB6M.:13200:0:99999:7:::
-default:!:13200:0:99999:7:::

target/device/Atmel/atngw100-expanded/target_skeleton/etc/shells

@@ -1,8 +0,0 @@
-# /etc/shells: valid login shells
-/bin/ash
-/bin/sh
-/bin/zsh
-/bin/bash
-/usr/bin/zsh
-/usr/bin/bash
-/usr/bin/screen

target/device/Atmel/atngw100-expanded/target_skeleton/usr/share/udhcpc/default.script

@@ -1,19 +0,0 @@
-#!/bin/sh
-
-
-case $1 in
-    deconfig)
-	ifconfig $interface 0.0.0.0
-	;;
-    bound|renew)
-	ifconfig $interface $ip netmask $subnet broadcast $broadcast
-	route add default gw $router
-	echo -n > /etc/resolv.conf
-	[ -z "$domain" ] || echo "domain $domain" >> /etc/resolv.conf
-	for n in $dns; do echo "nameserver $n" >> /etc/resolv.conf; done
-	if [ ! -z "$hostname" ]; then
-		echo $hostname > /etc/hostname
-		hostname $hostname
-	fi
-	;;
-esac

target/device/Atmel/atngw100/atngw100_defconfig

@@ -1,9 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Wed Apr 29 16:19:36 2009
+# Wed May 13 12:33:57 2009
 #
 BR2_HAVE_DOT_CONFIG=y
-BR2_VERSION="2009.05-svn"
+BR2_VERSION="2009.05-rc1"
 # BR2_alpha is not set
 # BR2_arm is not set
 # BR2_armeb is not set
@@ -69,8 +69,6 @@ BR2_TARGET_AVR32_ATNGW100=y
 # Secondary locations
 #
 BR2_TARGET_ATMEL_COPYTO=""
-BR2_KERNEL_ARCH_PATCH_VERSION="2.6.27.6"
-BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-avr32/kernel-patches-$(BR2_KERNEL_ARCH_PATCH_VERSION)"
 # BR2_TARGET_VALKA is not set
 
 #
@@ -117,7 +115,7 @@ BR2_TOPDIR_PREFIX=""
 BR2_TOPDIR_SUFFIX=""
 BR2_GNU_BUILD_SUFFIX="pc-linux-gnu"
 BR2_GNU_TARGET_SUFFIX="linux-uclibc"
-BR2_JLEVEL=2
+BR2_JLEVEL=3
 # BR2_PREFER_IMA is not set
 # BR2_DEPRECATED is not set
 BR2_RECENT=y
@@ -178,10 +176,10 @@ BR2_EXT_UCLIBC_VERSION_0_9_30=y
 # BR2_KERNEL_HEADERS_2_6_25 is not set
 # BR2_KERNEL_HEADERS_2_6_26 is not set
 # BR2_KERNEL_HEADERS_2_6_27 is not set
-BR2_KERNEL_HEADERS_2_6_28=y
-# BR2_KERNEL_HEADERS_2_6_29 is not set
+# BR2_KERNEL_HEADERS_2_6_28 is not set
+BR2_KERNEL_HEADERS_2_6_29=y
 # BR2_KERNEL_HEADERS_SNAP is not set
-BR2_DEFAULT_KERNEL_HEADERS="2.6.28.9"
+BR2_DEFAULT_KERNEL_HEADERS="2.6.29.2"
 
 #
 # uClibc Options
@@ -238,7 +236,8 @@ BR2_GCC_SHARED_LIBGCC=y
 #
 # Ccache Options
 #
-# BR2_CCACHE is not set
+BR2_CCACHE=y
+BR2_CCACHE_DIR="$(TOOL_BUILD_DIR)/ccache-$(CCACHE_VER)/cache"
 
 #
 # Gdb Options
@@ -246,14 +245,11 @@ BR2_GCC_SHARED_LIBGCC=y
 # BR2_PACKAGE_GDB is not set
 BR2_PACKAGE_GDB_SERVER=y
 BR2_PACKAGE_GDB_HOST=y
-# BR2_GDB_VERSION_6_2_1 is not set
-# BR2_GDB_VERSION_6_3 is not set
 # BR2_GDB_VERSION_6_4 is not set
 # BR2_GDB_VERSION_6_5 is not set
 # BR2_GDB_VERSION_6_6 is not set
 BR2_GDB_VERSION_6_7_1=y
 # BR2_GDB_VERSION_6_8 is not set
-# BR2_GDB_VERSION_SNAPSHOT is not set
 BR2_GDB_VERSION="6.7.1"
 
 #
@@ -267,7 +263,7 @@ BR2_ENABLE_LOCALE=y
 # BR2_ENABLE_LOCALE_PURGE is not set
 BR2_USE_WCHAR=y
 BR2_SOFT_FLOAT=y
-# BR2_USE_SSP is not set
+BR2_USE_SSP=y
 # BR2_PTHREADS_NONE is not set
 # BR2_PTHREADS is not set
 BR2_PTHREADS_OLD=y
@@ -286,10 +282,10 @@ BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y
 #
 BR2_PACKAGE_BUSYBOX=y
 # BR2_BUSYBOX_VERSION_1_12_X is not set
-BR2_BUSYBOX_VERSION_1_13_X=y
-# BR2_BUSYBOX_VERSION_1_14_X is not set
+# BR2_BUSYBOX_VERSION_1_13_X is not set
+BR2_BUSYBOX_VERSION_1_14_X=y
 # BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
-BR2_BUSYBOX_VERSION="1.13.4"
+BR2_BUSYBOX_VERSION="1.14.0"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 BR2_PACKAGE_BUSYBOX_HIDE_OTHERS=y
@@ -360,6 +356,7 @@ BR2_PACKAGE_LIBICONV=y
 # BR2_PACKAGE_NG_SPICE_REWORK is not set
 # BR2_PACKAGE_POPT is not set
 # BR2_PACKAGE_SCREEN is not set
+# BR2_PACKAGE_SHARED_MIME_INFO is not set
 # BR2_PACKAGE_STARTUP_NOTIFICATION is not set
 BR2_PACKAGE_STRACE=y
 # BR2_PACKAGE_SUDO is not set
@@ -534,10 +531,7 @@ BR2_PACKAGE_MTD_MTD_DEBUG=y
 # BR2_PACKAGE_MTD_NFTL_FORMAT is not set
 # BR2_PACKAGE_MTD_NFTLDUMP is not set
 # BR2_PACKAGE_MTD_SUMTOOL is not set
-
-#
-# ntfs-3g requires a toolchain with LARGEFILE and WCHAR support
-#
+# BR2_PACKAGE_NTFS_3G is not set
 # BR2_PACKAGE_PCIUTILS is not set
 # BR2_PACKAGE_PCMCIA is not set
 # BR2_PACKAGE_SETSERIAL is not set
@@ -652,6 +646,7 @@ BR2_PACKAGE_LIBGLIB2=y
 # dillo		- disabled (requires jpeg,libglib12,libgtk12,zlib,libpng and Xorg(7))
 #
 # BR2_PACKAGE_GQVIEW is not set
+# BR2_PACKAGE_GOB2 is not set
 # BR2_PACKAGE_LEAFPAD is not set
 
 #
@@ -807,9 +802,10 @@ BR2_KERNEL_LINUX_ADVANCED=y
 # BR2_KERNEL_LINUX is not set
 # BR2_KERNEL_HURD is not set
 BR2_PACKAGE_LINUX=y
-BR2_PACKAGE_LINUX_KCONFIG="$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-2.6.27.config"
+BR2_PACKAGE_LINUX_KCONFIG="$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-2.6.29.2.config"
 BR2_PACKAGE_LINUX_FORMAT="uImage"
-BR2_KERNEL_CURRENT_VERSION="2.6.28.7"
+BR2_KERNEL_CURRENT_VERSION="2.6.29.2"
+BR2_KERNEL_LATEST_2_6_29="2"
 BR2_KERNEL_LATEST_2_6_28="7"
 BR2_KERNEL_LATEST_2_6_27="13"
 BR2_KERNEL_LATEST_2_6_26="8"
@@ -819,16 +815,16 @@ BR2_KERNEL_LATEST_2_6_23="17"
 BR2_KERNEL_LATEST_2_6_22="19"
 BR2_KERNEL_LATEST_2_6_21="7"
 BR2_KERNEL_LATEST_2_6_20="21"
-BR2_KERNEL_PATCH_LEVEL="13"
-BR2_KERNEL_NEXT_VERSION="2.6.28"
-BR2_KERNEL_THIS_VERSION="2.6.27"
+BR2_KERNEL_PATCH_LEVEL="2"
+BR2_KERNEL_THIS_VERSION="2.6.29"
 BR2_KERNEL_SITE="http://ftp.kernel.org/pub/linux/kernel/v2.6"
 BR2_MM_PATCH_SITE="http://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6"
 BR2_RC_MM_PATCH_DIR="$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)/2.6.$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)-mm$(BR2_KERNEL_MM_LEVEL)"
 BR2_KERNEL_PATCH_SITE="$(BR2_KERNEL_SITE)"
 # BR2_LINUX_2_6_STABLE is not set
+BR2_LINUX_2_6_29=y
 # BR2_LINUX_2_6_28 is not set
-BR2_LINUX_2_6_27=y
+# BR2_LINUX_2_6_27 is not set
 # BR2_LINUX_2_6_26 is not set
 # BR2_LINUX_2_6_25 is not set
 # BR2_LINUX_2_6_24 is not set
@@ -836,7 +832,6 @@ BR2_LINUX_2_6_27=y
 # BR2_LINUX_2_6_22 is not set
 # BR2_LINUX_2_6_21 is not set
 # BR2_LINUX_2_6_20 is not set
-# BR2_LINUX_2_6_29 is not set
 # BR2_LINUX26_CUSTOM is not set
 
 #
@@ -853,9 +848,7 @@ BR2_KERNEL_ADD_LATEST_MINORPATCH=y
 # BR2_KERNEL_ADD_LATEST_MM_PATCH is not set
 # BR2_KERNEL_ADD_MM_PATCH is not set
 BR2_KERNEL_ADD_PATCH=y
-BR2_KERNEL_ARCH_PATCH_ENABLED=y
-# BR2_ARCH_AVR32_2_6_28_2 is not set
-BR2_ARCH_AVR32_2_6_27_6=y
+# BR2_KERNEL_ARCH_PATCH_ENABLED is not set
 BR2_LINUX_BSP_PATCH=""
 BR2_KERNEL_PATCH="patch-$(BR2_DOWNLOAD_LINUX26_VERSION).$(BR2_KERNEL_PATCH_LEVEL).bz2"
 BR2_EXTRA_VERSION=".$(BR2_KERNEL_PATCH_LEVEL)"

target/device/Atmel/atngw100/busybox-1.9.1.config

@@ -1,767 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Busybox version: 1.8.2
-# Sun Dec 23 12:11:59 2007
-#
-CONFIG_HAVE_DOT_CONFIG=y
-
-#
-# Busybox Settings
-#
-
-#
-# General Configuration
-#
-# CONFIG_NITPICK is not set
-# CONFIG_DESKTOP is not set
-# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
-# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
-# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
-CONFIG_SHOW_USAGE=y
-CONFIG_FEATURE_VERBOSE_USAGE=y
-# CONFIG_FEATURE_COMPRESS_USAGE is not set
-# CONFIG_FEATURE_INSTALLER is not set
-# CONFIG_LOCALE_SUPPORT is not set
-CONFIG_GETOPT_LONG=y
-CONFIG_FEATURE_DEVPTS=y
-# CONFIG_FEATURE_CLEAN_UP is not set
-# CONFIG_FEATURE_PIDFILE is not set
-CONFIG_FEATURE_SUID=y
-# CONFIG_FEATURE_SUID_CONFIG is not set
-# CONFIG_FEATURE_SUID_CONFIG_QUIET is not set
-# CONFIG_SELINUX is not set
-# CONFIG_FEATURE_PREFER_APPLETS is not set
-CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
-CONFIG_FEATURE_SYSLOG=y
-CONFIG_FEATURE_HAVE_RPC=y
-
-#
-# Build Options
-#
-CONFIG_STATIC=y
-CONFIG_BUILD_LIBBUSYBOX=y
-# CONFIG_FEATURE_INDIVIDUAL is not set
-# CONFIG_FEATURE_SHARED_BUSYBOX is not set
-CONFIG_LFS=y
-
-#
-# Debugging Options
-#
-# CONFIG_DEBUG is not set
-# CONFIG_WERROR is not set
-CONFIG_NO_DEBUG_LIB=y
-# CONFIG_DMALLOC is not set
-# CONFIG_EFENCE is not set
-CONFIG_INCLUDE_SUSv2=y
-
-#
-# Installation Options
-#
-# CONFIG_INSTALL_NO_USR is not set
-CONFIG_INSTALL_APPLET_SYMLINKS=y
-# CONFIG_INSTALL_APPLET_HARDLINKS is not set
-# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
-# CONFIG_INSTALL_APPLET_DONT is not set
-# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
-# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
-# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
-CONFIG_PREFIX="/usr/avr32-linux"
-
-#
-# Busybox Library Tuning
-#
-CONFIG_PASSWORD_MINLEN=6
-CONFIG_MD5_SIZE_VS_SPEED=2
-CONFIG_FEATURE_FAST_TOP=y
-# CONFIG_FEATURE_ETC_NETWORKS is not set
-CONFIG_FEATURE_EDITING=y
-CONFIG_FEATURE_EDITING_MAX_LEN=1024
-CONFIG_FEATURE_EDITING_FANCY_KEYS=y
-# CONFIG_FEATURE_EDITING_VI is not set
-CONFIG_FEATURE_EDITING_HISTORY=100
-CONFIG_FEATURE_EDITING_SAVEHISTORY=y
-CONFIG_FEATURE_TAB_COMPLETION=y
-# CONFIG_FEATURE_USERNAME_COMPLETION is not set
-CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
-CONFIG_MONOTONIC_SYSCALL=y
-CONFIG_IOCTL_HEX2STR_ERROR=y
-
-#
-# Applets
-#
-
-#
-# Archival Utilities
-#
-CONFIG_AR=y
-CONFIG_FEATURE_AR_LONG_FILENAMES=y
-CONFIG_BUNZIP2=y
-CONFIG_BZIP2=y
-CONFIG_CPIO=y
-CONFIG_DPKG=y
-CONFIG_DPKG_DEB=y
-# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
-CONFIG_GUNZIP=y
-CONFIG_FEATURE_GUNZIP_UNCOMPRESS=y
-CONFIG_GZIP=y
-CONFIG_RPM2CPIO=y
-CONFIG_RPM=y
-CONFIG_FEATURE_RPM_BZ2=y
-CONFIG_TAR=y
-CONFIG_FEATURE_TAR_CREATE=y
-CONFIG_FEATURE_TAR_BZIP2=y
-CONFIG_FEATURE_TAR_LZMA=y
-CONFIG_FEATURE_TAR_FROM=y
-CONFIG_FEATURE_TAR_GZIP=y
-CONFIG_FEATURE_TAR_COMPRESS=y
-CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
-CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY=y
-CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
-CONFIG_FEATURE_TAR_LONG_OPTIONS=y
-CONFIG_UNCOMPRESS=y
-CONFIG_UNLZMA=y
-CONFIG_FEATURE_LZMA_FAST=y
-CONFIG_UNZIP=y
-
-#
-# Common options for cpio and tar
-#
-# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
-
-#
-# Common options for dpkg and dpkg_deb
-#
-CONFIG_FEATURE_DEB_TAR_GZ=y
-CONFIG_FEATURE_DEB_TAR_BZ2=y
-CONFIG_FEATURE_DEB_TAR_LZMA=y
-
-#
-# Coreutils
-#
-CONFIG_BASENAME=y
-CONFIG_CAL=y
-CONFIG_CAT=y
-CONFIG_CATV=y
-CONFIG_CHGRP=y
-CONFIG_CHMOD=y
-CONFIG_CHOWN=y
-CONFIG_CHROOT=y
-CONFIG_CKSUM=y
-CONFIG_COMM=y
-CONFIG_CP=y
-CONFIG_CUT=y
-CONFIG_DATE=y
-CONFIG_FEATURE_DATE_ISOFMT=y
-CONFIG_DD=y
-CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
-CONFIG_FEATURE_DD_IBS_OBS=y
-CONFIG_DF=y
-CONFIG_DIRNAME=y
-CONFIG_DOS2UNIX=y
-CONFIG_UNIX2DOS=y
-CONFIG_DU=y
-CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
-CONFIG_ECHO=y
-CONFIG_FEATURE_FANCY_ECHO=y
-CONFIG_ENV=y
-CONFIG_FEATURE_ENV_LONG_OPTIONS=y
-CONFIG_EXPAND=y
-CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y
-CONFIG_EXPR=y
-CONFIG_EXPR_MATH_SUPPORT_64=y
-CONFIG_FALSE=y
-CONFIG_FOLD=y
-CONFIG_HEAD=y
-CONFIG_FEATURE_FANCY_HEAD=y
-CONFIG_HOSTID=y
-CONFIG_ID=y
-CONFIG_INSTALL=y
-CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
-CONFIG_LENGTH=y
-CONFIG_LN=y
-CONFIG_LOGNAME=y
-CONFIG_LS=y
-CONFIG_FEATURE_LS_FILETYPES=y
-CONFIG_FEATURE_LS_FOLLOWLINKS=y
-CONFIG_FEATURE_LS_RECURSIVE=y
-CONFIG_FEATURE_LS_SORTFILES=y
-CONFIG_FEATURE_LS_TIMESTAMPS=y
-CONFIG_FEATURE_LS_USERNAME=y
-CONFIG_FEATURE_LS_COLOR=y
-CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
-CONFIG_MD5SUM=y
-CONFIG_MKDIR=y
-CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
-CONFIG_MKFIFO=y
-CONFIG_MKNOD=y
-CONFIG_MV=y
-CONFIG_FEATURE_MV_LONG_OPTIONS=y
-CONFIG_NICE=y
-CONFIG_NOHUP=y
-CONFIG_OD=y
-CONFIG_PRINTENV=y
-CONFIG_PRINTF=y
-CONFIG_PWD=y
-CONFIG_READLINK=y
-CONFIG_FEATURE_READLINK_FOLLOW=y
-CONFIG_REALPATH=y
-CONFIG_RM=y
-CONFIG_RMDIR=y
-CONFIG_SEQ=y
-CONFIG_SHA1SUM=y
-CONFIG_SLEEP=y
-CONFIG_FEATURE_FANCY_SLEEP=y
-CONFIG_SORT=y
-CONFIG_FEATURE_SORT_BIG=y
-CONFIG_SPLIT=y
-CONFIG_FEATURE_SPLIT_FANCY=y
-CONFIG_STAT=y
-CONFIG_FEATURE_STAT_FORMAT=y
-CONFIG_STTY=y
-CONFIG_SUM=y
-CONFIG_SYNC=y
-CONFIG_TAIL=y
-CONFIG_FEATURE_FANCY_TAIL=y
-CONFIG_TEE=y
-CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
-CONFIG_TEST=y
-CONFIG_FEATURE_TEST_64=y
-CONFIG_TOUCH=y
-CONFIG_TR=y
-CONFIG_FEATURE_TR_CLASSES=y
-CONFIG_FEATURE_TR_EQUIV=y
-CONFIG_TRUE=y
-CONFIG_TTY=y
-CONFIG_UNAME=y
-CONFIG_UNEXPAND=y
-CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y
-CONFIG_UNIQ=y
-CONFIG_USLEEP=y
-CONFIG_UUDECODE=y
-CONFIG_UUENCODE=y
-CONFIG_WC=y
-CONFIG_FEATURE_WC_LARGE=y
-CONFIG_WHO=y
-CONFIG_WHOAMI=y
-CONFIG_YES=y
-
-#
-# Common options for cp and mv
-#
-CONFIG_FEATURE_PRESERVE_HARDLINKS=y
-
-#
-# Common options for ls, more and telnet
-#
-CONFIG_FEATURE_AUTOWIDTH=y
-
-#
-# Common options for df, du, ls
-#
-CONFIG_FEATURE_HUMAN_READABLE=y
-
-#
-# Common options for md5sum, sha1sum
-#
-CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
-
-#
-# Console Utilities
-#
-CONFIG_CHVT=y
-CONFIG_CLEAR=y
-CONFIG_DEALLOCVT=y
-CONFIG_DUMPKMAP=y
-CONFIG_KBD_MODE=y
-CONFIG_LOADFONT=y
-CONFIG_LOADKMAP=y
-CONFIG_OPENVT=y
-CONFIG_RESET=y
-CONFIG_RESIZE=y
-CONFIG_FEATURE_RESIZE_PRINT=y
-CONFIG_SETCONSOLE=y
-CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y
-CONFIG_SETKEYCODES=y
-CONFIG_SETLOGCONS=y
-
-#
-# Debian Utilities
-#
-CONFIG_MKTEMP=y
-# CONFIG_PIPE_PROGRESS is not set
-CONFIG_RUN_PARTS=y
-CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
-# CONFIG_FEATURE_RUN_PARTS_FANCY is not set
-CONFIG_START_STOP_DAEMON=y
-CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
-CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
-CONFIG_WHICH=y
-
-#
-# Editors
-#
-CONFIG_AWK=y
-CONFIG_FEATURE_AWK_MATH=y
-CONFIG_CMP=y
-CONFIG_DIFF=y
-CONFIG_FEATURE_DIFF_BINARY=y
-CONFIG_FEATURE_DIFF_DIR=y
-CONFIG_FEATURE_DIFF_MINIMAL=y
-CONFIG_ED=y
-CONFIG_PATCH=y
-CONFIG_SED=y
-CONFIG_VI=y
-CONFIG_FEATURE_VI_MAX_LEN=1024
-CONFIG_FEATURE_VI_COLON=y
-CONFIG_FEATURE_VI_YANKMARK=y
-CONFIG_FEATURE_VI_SEARCH=y
-CONFIG_FEATURE_VI_USE_SIGNALS=y
-CONFIG_FEATURE_VI_DOT_CMD=y
-CONFIG_FEATURE_VI_READONLY=y
-CONFIG_FEATURE_VI_SETOPTS=y
-CONFIG_FEATURE_VI_SET=y
-CONFIG_FEATURE_VI_WIN_RESIZE=y
-CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
-CONFIG_FEATURE_ALLOW_EXEC=y
-
-#
-# Finding Utilities
-#
-CONFIG_FIND=y
-CONFIG_FEATURE_FIND_PRINT0=y
-CONFIG_FEATURE_FIND_MTIME=y
-CONFIG_FEATURE_FIND_MMIN=y
-CONFIG_FEATURE_FIND_PERM=y
-CONFIG_FEATURE_FIND_TYPE=y
-CONFIG_FEATURE_FIND_XDEV=y
-CONFIG_FEATURE_FIND_MAXDEPTH=y
-CONFIG_FEATURE_FIND_NEWER=y
-CONFIG_FEATURE_FIND_INUM=y
-CONFIG_FEATURE_FIND_EXEC=y
-CONFIG_FEATURE_FIND_USER=y
-CONFIG_FEATURE_FIND_GROUP=y
-CONFIG_FEATURE_FIND_NOT=y
-CONFIG_FEATURE_FIND_DEPTH=y
-CONFIG_FEATURE_FIND_PAREN=y
-CONFIG_FEATURE_FIND_SIZE=y
-CONFIG_FEATURE_FIND_PRUNE=y
-CONFIG_FEATURE_FIND_DELETE=y
-CONFIG_FEATURE_FIND_PATH=y
-CONFIG_FEATURE_FIND_REGEX=y
-# CONFIG_FEATURE_FIND_CONTEXT is not set
-CONFIG_GREP=y
-CONFIG_FEATURE_GREP_EGREP_ALIAS=y
-CONFIG_FEATURE_GREP_FGREP_ALIAS=y
-CONFIG_FEATURE_GREP_CONTEXT=y
-CONFIG_XARGS=y
-CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
-CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
-CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
-CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
-
-#
-# Init Utilities
-#
-CONFIG_INIT=y
-# CONFIG_DEBUG_INIT is not set
-CONFIG_FEATURE_USE_INITTAB=y
-CONFIG_FEATURE_INIT_SCTTY=y
-CONFIG_FEATURE_INIT_SYSLOG=y
-CONFIG_FEATURE_EXTRA_QUIET=y
-# CONFIG_FEATURE_INIT_COREDUMPS is not set
-CONFIG_FEATURE_INITRD=y
-CONFIG_HALT=y
-CONFIG_MESG=y
-
-#
-# Login/Password Management Utilities
-#
-CONFIG_FEATURE_SHADOWPASSWDS=y
-# CONFIG_USE_BB_SHADOW is not set
-# CONFIG_USE_BB_PWD_GRP is not set
-CONFIG_ADDGROUP=y
-CONFIG_FEATURE_ADDUSER_TO_GROUP=y
-CONFIG_DELGROUP=y
-CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
-CONFIG_ADDUSER=y
-CONFIG_DELUSER=y
-CONFIG_GETTY=y
-CONFIG_FEATURE_UTMP=y
-CONFIG_FEATURE_WTMP=y
-CONFIG_LOGIN=y
-# CONFIG_PAM is not set
-CONFIG_LOGIN_SCRIPTS=y
-CONFIG_FEATURE_NOLOGIN=y
-CONFIG_FEATURE_SECURETTY=y
-CONFIG_PASSWD=y
-CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
-# CONFIG_CRYPTPW is not set
-# CONFIG_CHPASSWD is not set
-CONFIG_SU=y
-CONFIG_FEATURE_SU_SYSLOG=y
-CONFIG_FEATURE_SU_CHECKS_SHELLS=y
-CONFIG_SULOGIN=y
-CONFIG_VLOCK=y
-
-#
-# Linux Ext2 FS Progs
-#
-CONFIG_CHATTR=y
-CONFIG_FSCK=y
-CONFIG_LSATTR=y
-
-#
-# Linux Module Utilities
-#
-CONFIG_INSMOD=y
-# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
-# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
-# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
-CONFIG_FEATURE_INSMOD_LOAD_MAP=y
-CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL=y
-CONFIG_RMMOD=y
-CONFIG_LSMOD=y
-CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
-CONFIG_MODPROBE=y
-CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y
-CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y
-
-#
-# Options common to multiple modutils
-#
-CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
-# CONFIG_FEATURE_2_4_MODULES is not set
-CONFIG_FEATURE_2_6_MODULES=y
-# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set
-
-#
-# Linux System Utilities
-#
-CONFIG_DMESG=y
-CONFIG_FEATURE_DMESG_PRETTY=y
-CONFIG_FBSET=y
-CONFIG_FEATURE_FBSET_FANCY=y
-CONFIG_FEATURE_FBSET_READMODE=y
-CONFIG_FDFLUSH=y
-CONFIG_FDFORMAT=y
-CONFIG_FDISK=y
-CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
-CONFIG_FEATURE_FDISK_WRITABLE=y
-# CONFIG_FEATURE_AIX_LABEL is not set
-# CONFIG_FEATURE_SGI_LABEL is not set
-# CONFIG_FEATURE_SUN_LABEL is not set
-# CONFIG_FEATURE_OSF_LABEL is not set
-# CONFIG_FEATURE_FDISK_ADVANCED is not set
-# CONFIG_FREERAMDISK is not set
-# CONFIG_FSCK_MINIX is not set
-# CONFIG_MKFS_MINIX is not set
-# CONFIG_FEATURE_MINIX2 is not set
-CONFIG_GETOPT=y
-CONFIG_HEXDUMP=y
-CONFIG_HWCLOCK=y
-# CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS is not set
-# CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS is not set
-CONFIG_IPCRM=y
-CONFIG_IPCS=y
-CONFIG_LOSETUP=y
-CONFIG_MDEV=y
-CONFIG_FEATURE_MDEV_CONF=y
-CONFIG_FEATURE_MDEV_EXEC=y
-CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
-CONFIG_MKSWAP=y
-# CONFIG_FEATURE_MKSWAP_V0 is not set
-CONFIG_MORE=y
-CONFIG_FEATURE_USE_TERMIOS=y
-CONFIG_MOUNT=y
-CONFIG_FEATURE_MOUNT_HELPERS=y
-CONFIG_FEATURE_MOUNT_NFS=y
-CONFIG_FEATURE_MOUNT_CIFS=y
-CONFIG_FEATURE_MOUNT_FLAGS=y
-CONFIG_FEATURE_MOUNT_FSTAB=y
-CONFIG_PIVOT_ROOT=y
-CONFIG_RDATE=y
-CONFIG_READPROFILE=y
-CONFIG_SETARCH=y
-CONFIG_SWAPONOFF=y
-CONFIG_SWITCH_ROOT=y
-CONFIG_UMOUNT=y
-CONFIG_FEATURE_UMOUNT_ALL=y
-
-#
-# Common options for mount/umount
-#
-CONFIG_FEATURE_MOUNT_LOOP=y
-CONFIG_FEATURE_MTAB_SUPPORT=y
-
-#
-# Miscellaneous Utilities
-#
-# CONFIG_ADJTIMEX is not set
-CONFIG_BBCONFIG=y
-CONFIG_CHRT=y
-CONFIG_CROND=y
-CONFIG_DEBUG_CROND_OPTION=y
-# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
-CONFIG_CRONTAB=y
-CONFIG_DC=y
-# CONFIG_DEVFSD is not set
-# CONFIG_DEVFSD_MODLOAD is not set
-# CONFIG_DEVFSD_FG_NP is not set
-# CONFIG_DEVFSD_VERBOSE is not set
-# CONFIG_FEATURE_DEVFS is not set
-# CONFIG_EJECT is not set
-CONFIG_LAST=y
-CONFIG_LESS=y
-CONFIG_FEATURE_LESS_MAXLINES=9999999
-CONFIG_FEATURE_LESS_BRACKETS=y
-CONFIG_FEATURE_LESS_FLAGS=y
-CONFIG_FEATURE_LESS_FLAGCS=y
-CONFIG_FEATURE_LESS_MARKS=y
-CONFIG_FEATURE_LESS_REGEXP=y
-CONFIG_HDPARM=y
-CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
-CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y
-CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y
-CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y
-CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y
-CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
-CONFIG_MAKEDEVS=y
-# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
-CONFIG_FEATURE_MAKEDEVS_TABLE=y
-CONFIG_MICROCOM=y
-CONFIG_MOUNTPOINT=y
-CONFIG_MT=y
-# CONFIG_RAIDAUTORUN is not set
-# CONFIG_READAHEAD is not set
-CONFIG_RUNLEVEL=y
-CONFIG_RX=y
-CONFIG_STRINGS=y
-CONFIG_SETSID=y
-# CONFIG_TASKSET is not set
-# CONFIG_FEATURE_TASKSET_FANCY is not set
-CONFIG_TIME=y
-CONFIG_TTYSIZE=y
-CONFIG_WATCHDOG=y
-
-#
-# Networking Utilities
-#
-CONFIG_FEATURE_IPV6=y
-# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
-CONFIG_ARP=y
-CONFIG_ARPING=y
-CONFIG_DNSD=y
-CONFIG_ETHER_WAKE=y
-# CONFIG_FAKEIDENTD is not set
-CONFIG_FTPGET=y
-CONFIG_FTPPUT=y
-CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y
-CONFIG_HOSTNAME=y
-CONFIG_HTTPD=y
-CONFIG_FEATURE_HTTPD_RANGES=y
-CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
-CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP=y
-CONFIG_FEATURE_HTTPD_SETUID=y
-CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
-CONFIG_FEATURE_HTTPD_AUTH_MD5=y
-CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES=y
-CONFIG_FEATURE_HTTPD_CGI=y
-CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y
-CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
-CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y
-CONFIG_FEATURE_HTTPD_ERROR_PAGES=y
-CONFIG_FEATURE_HTTPD_PROXY=y
-CONFIG_IFCONFIG=y
-CONFIG_FEATURE_IFCONFIG_STATUS=y
-# CONFIG_FEATURE_IFCONFIG_SLIP is not set
-# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
-CONFIG_FEATURE_IFCONFIG_HW=y
-# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
-CONFIG_IFUPDOWN=y
-CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
-# CONFIG_FEATURE_IFUPDOWN_IP is not set
-# CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN is not set
-CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN=y
-CONFIG_FEATURE_IFUPDOWN_IPV4=y
-CONFIG_FEATURE_IFUPDOWN_IPV6=y
-# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set
-CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
-CONFIG_INETD=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN=y
-CONFIG_FEATURE_INETD_RPC=y
-# CONFIG_IP is not set
-# CONFIG_FEATURE_IP_ADDRESS is not set
-# CONFIG_FEATURE_IP_LINK is not set
-# CONFIG_FEATURE_IP_ROUTE is not set
-# CONFIG_FEATURE_IP_TUNNEL is not set
-# CONFIG_FEATURE_IP_RULE is not set
-# CONFIG_FEATURE_IP_SHORT_FORMS is not set
-# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
-# CONFIG_IPADDR is not set
-# CONFIG_IPLINK is not set
-# CONFIG_IPROUTE is not set
-# CONFIG_IPTUNNEL is not set
-# CONFIG_IPRULE is not set
-# CONFIG_IPCALC is not set
-# CONFIG_FEATURE_IPCALC_FANCY is not set
-# CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set
-# CONFIG_NAMEIF is not set
-# CONFIG_NC is not set
-# CONFIG_NC_SERVER is not set
-# CONFIG_NC_EXTRA is not set
-CONFIG_NETSTAT=y
-CONFIG_FEATURE_NETSTAT_WIDE=y
-CONFIG_NSLOOKUP=y
-CONFIG_PING=y
-CONFIG_PING6=y
-CONFIG_PSCAN=y
-CONFIG_FEATURE_FANCY_PING=y
-CONFIG_ROUTE=y
-# CONFIG_SLATTACH is not set
-CONFIG_TELNET=y
-CONFIG_FEATURE_TELNET_TTYPE=y
-CONFIG_FEATURE_TELNET_AUTOLOGIN=y
-CONFIG_TELNETD=y
-CONFIG_FEATURE_TELNETD_STANDALONE=y
-CONFIG_TFTP=y
-CONFIG_FEATURE_TFTP_GET=y
-CONFIG_FEATURE_TFTP_PUT=y
-CONFIG_FEATURE_TFTP_BLOCKSIZE=y
-# CONFIG_DEBUG_TFTP is not set
-CONFIG_TRACEROUTE=y
-CONFIG_FEATURE_TRACEROUTE_VERBOSE=y
-# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
-# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
-CONFIG_APP_UDHCPD=y
-# CONFIG_APP_DHCPRELAY is not set
-# CONFIG_APP_DUMPLEASES is not set
-# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
-CONFIG_APP_UDHCPC=y
-# CONFIG_FEATURE_UDHCP_DEBUG is not set
-# CONFIG_FEATURE_RFC3397 is not set
-CONFIG_VCONFIG=y
-CONFIG_WGET=y
-CONFIG_FEATURE_WGET_STATUSBAR=y
-CONFIG_FEATURE_WGET_AUTHENTICATION=y
-# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set
-# CONFIG_ZCIP is not set
-
-#
-# Process Utilities
-#
-CONFIG_FREE=y
-CONFIG_FUSER=y
-CONFIG_KILL=y
-CONFIG_KILLALL=y
-CONFIG_KILLALL5=y
-CONFIG_NMETER=y
-CONFIG_PGREP=y
-CONFIG_PIDOF=y
-CONFIG_FEATURE_PIDOF_SINGLE=y
-CONFIG_FEATURE_PIDOF_OMIT=y
-CONFIG_PKILL=y
-CONFIG_PS=y
-CONFIG_FEATURE_PS_WIDE=y
-CONFIG_RENICE=y
-CONFIG_BB_SYSCTL=y
-CONFIG_TOP=y
-CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
-CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
-CONFIG_FEATURE_TOP_DECIMALS=y
-CONFIG_FEATURE_TOPMEM=y
-CONFIG_UPTIME=y
-CONFIG_WATCH=y
-
-#
-# Shells
-#
-CONFIG_FEATURE_SH_IS_ASH=y
-# CONFIG_FEATURE_SH_IS_HUSH is not set
-# CONFIG_FEATURE_SH_IS_LASH is not set
-# CONFIG_FEATURE_SH_IS_MSH is not set
-# CONFIG_FEATURE_SH_IS_NONE is not set
-CONFIG_ASH=y
-
-#
-# Ash Shell Options
-#
-CONFIG_ASH_JOB_CONTROL=y
-CONFIG_ASH_READ_NCHARS=y
-CONFIG_ASH_READ_TIMEOUT=y
-CONFIG_ASH_ALIAS=y
-CONFIG_ASH_MATH_SUPPORT=y
-CONFIG_ASH_MATH_SUPPORT_64=y
-CONFIG_ASH_GETOPTS=y
-CONFIG_ASH_BUILTIN_ECHO=y
-CONFIG_ASH_BUILTIN_TEST=y
-# CONFIG_ASH_CMDCMD is not set
-# CONFIG_ASH_MAIL is not set
-CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
-# CONFIG_ASH_RANDOM_SUPPORT is not set
-CONFIG_ASH_EXPAND_PRMT=y
-# CONFIG_HUSH is not set
-# CONFIG_HUSH_HELP is not set
-# CONFIG_HUSH_INTERACTIVE is not set
-# CONFIG_HUSH_JOB is not set
-# CONFIG_HUSH_TICK is not set
-# CONFIG_HUSH_IF is not set
-# CONFIG_HUSH_LOOPS is not set
-# CONFIG_LASH is not set
-# CONFIG_MSH is not set
-
-#
-# Bourne Shell Options
-#
-# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
-# CONFIG_FEATURE_SH_STANDALONE is not set
-# CONFIG_CTTYHACK is not set
-
-#
-# System Logging Utilities
-#
-CONFIG_SYSLOGD=y
-CONFIG_FEATURE_ROTATE_LOGFILE=y
-# CONFIG_FEATURE_REMOTE_LOG is not set
-# CONFIG_FEATURE_IPC_SYSLOG is not set
-CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=
-# CONFIG_LOGREAD is not set
-# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set
-CONFIG_KLOGD=y
-CONFIG_LOGGER=y
-
-#
-# Runit Utilities
-#
-# CONFIG_RUNSV is not set
-# CONFIG_RUNSVDIR is not set
-# CONFIG_SV is not set
-# CONFIG_SVLOGD is not set
-# CONFIG_CHPST is not set
-# CONFIG_SETUIDGID is not set
-# CONFIG_ENVUIDGID is not set
-# CONFIG_ENVDIR is not set
-# CONFIG_SOFTLIMIT is not set
-# CONFIG_CHCON is not set
-# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
-# CONFIG_GETENFORCE is not set
-# CONFIG_GETSEBOOL is not set
-# CONFIG_LOAD_POLICY is not set
-# CONFIG_MATCHPATHCON is not set
-# CONFIG_RESTORECON is not set
-# CONFIG_RUNCON is not set
-# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
-# CONFIG_SELINUXENABLED is not set
-# CONFIG_SETENFORCE is not set
-# CONFIG_SETFILES is not set
-# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
-# CONFIG_SETSEBOOL is not set
-
-#
-# ipsvd utilities
-#
-# CONFIG_TCPSVD is not set
-# CONFIG_UDPSVD is not set

target/device/x86/i686/busybox.config

@@ -1,719 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Busybox version: 1.6.0
-# Sat Jun  2 19:38:43 2007
-#
-CONFIG_HAVE_DOT_CONFIG=y
-
-#
-# Busybox Settings
-#
-
-#
-# General Configuration
-#
-CONFIG_NITPICK=y
-# CONFIG_DESKTOP is not set
-CONFIG_FEATURE_BUFFERS_USE_MALLOC=y
-# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
-# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
-CONFIG_SHOW_USAGE=y
-CONFIG_FEATURE_VERBOSE_USAGE=y
-# CONFIG_FEATURE_COMPRESS_USAGE is not set
-# CONFIG_FEATURE_INSTALLER is not set
-# CONFIG_LOCALE_SUPPORT is not set
-CONFIG_GETOPT_LONG=y
-CONFIG_FEATURE_DEVPTS=y
-# CONFIG_FEATURE_CLEAN_UP is not set
-# CONFIG_FEATURE_PIDFILE is not set
-CONFIG_FEATURE_SUID=y
-CONFIG_FEATURE_SYSLOG=y
-# CONFIG_FEATURE_SUID_CONFIG is not set
-# CONFIG_FEATURE_SUID_CONFIG_QUIET is not set
-# CONFIG_FEATURE_HAVE_RPC is not set
-# CONFIG_SELINUX is not set
-# CONFIG_FEATURE_PREFER_APPLETS is not set
-CONFIG_BUSYBOX_EXEC_PATH="/bin/busybox"
-
-#
-# Build Options
-#
-# CONFIG_STATIC is not set
-# CONFIG_BUILD_LIBBUSYBOX is not set
-# CONFIG_FEATURE_FULL_LIBBUSYBOX is not set
-# CONFIG_FEATURE_SHARED_BUSYBOX is not set
-# CONFIG_LFS is not set
-# CONFIG_BUILD_AT_ONCE is not set
-
-#
-# Debugging Options
-#
-# CONFIG_DEBUG is not set
-# CONFIG_WERROR is not set
-CONFIG_NO_DEBUG_LIB=y
-# CONFIG_DMALLOC is not set
-# CONFIG_EFENCE is not set
-# CONFIG_INCLUDE_SUSv2 is not set
-
-#
-# Installation Options
-#
-# CONFIG_INSTALL_NO_USR is not set
-CONFIG_INSTALL_APPLET_SYMLINKS=y
-# CONFIG_INSTALL_APPLET_HARDLINKS is not set
-# CONFIG_INSTALL_APPLET_DONT is not set
-CONFIG_PREFIX="./_install"
-
-#
-# Busybox Library Tuning
-#
-CONFIG_PASSWORD_MINLEN=6
-CONFIG_MD5_SIZE_VS_SPEED=3
-CONFIG_FEATURE_EDITING=y
-CONFIG_FEATURE_EDITING_FANCY_KEYS=y
-CONFIG_FEATURE_EDITING_VI=y
-CONFIG_FEATURE_EDITING_HISTORY=99
-CONFIG_FEATURE_EDITING_SAVEHISTORY=y
-CONFIG_FEATURE_TAB_COMPLETION=y
-# CONFIG_FEATURE_USERNAME_COMPLETION is not set
-CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
-
-#
-# Applets
-#
-
-#
-# Archival Utilities
-#
-CONFIG_AR=y
-# CONFIG_FEATURE_AR_LONG_FILENAMES is not set
-CONFIG_BUNZIP2=y
-# CONFIG_CPIO is not set
-# CONFIG_DPKG is not set
-# CONFIG_DPKG_DEB is not set
-# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
-CONFIG_GUNZIP=y
-# CONFIG_FEATURE_GUNZIP_UNCOMPRESS is not set
-CONFIG_GZIP=y
-# CONFIG_RPM2CPIO is not set
-# CONFIG_RPM is not set
-CONFIG_TAR=y
-CONFIG_FEATURE_TAR_CREATE=y
-CONFIG_FEATURE_TAR_BZIP2=y
-# CONFIG_FEATURE_TAR_LZMA is not set
-# CONFIG_FEATURE_TAR_FROM is not set
-CONFIG_FEATURE_TAR_GZIP=y
-# CONFIG_FEATURE_TAR_COMPRESS is not set
-# CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY is not set
-CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
-# CONFIG_FEATURE_TAR_LONG_OPTIONS is not set
-# CONFIG_UNCOMPRESS is not set
-# CONFIG_UNLZMA is not set
-# CONFIG_FEATURE_LZMA_FAST is not set
-# CONFIG_UNZIP is not set
-
-#
-# Common options for cpio and tar
-#
-# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
-# CONFIG_FEATURE_DEB_TAR_GZ is not set
-# CONFIG_FEATURE_DEB_TAR_BZ2 is not set
-# CONFIG_FEATURE_DEB_TAR_LZMA is not set
-
-#
-# Coreutils
-#
-CONFIG_BASENAME=y
-# CONFIG_CAL is not set
-CONFIG_CAT=y
-# CONFIG_CATV is not set
-CONFIG_CHGRP=y
-CONFIG_CHMOD=y
-CONFIG_CHOWN=y
-CONFIG_CHROOT=y
-# CONFIG_CKSUM is not set
-CONFIG_CMP=y
-# CONFIG_COMM is not set
-CONFIG_CP=y
-CONFIG_CUT=y
-CONFIG_DATE=y
-# CONFIG_FEATURE_DATE_ISOFMT is not set
-CONFIG_DD=y
-CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
-CONFIG_FEATURE_DD_IBS_OBS=y
-CONFIG_DF=y
-# CONFIG_DIFF is not set
-# CONFIG_FEATURE_DIFF_BINARY is not set
-# CONFIG_FEATURE_DIFF_DIR is not set
-# CONFIG_FEATURE_DIFF_MINIMAL is not set
-CONFIG_DIRNAME=y
-CONFIG_DOS2UNIX=y
-CONFIG_UNIX2DOS=y
-CONFIG_DU=y
-CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
-CONFIG_ECHO=y
-CONFIG_FEATURE_FANCY_ECHO=y
-CONFIG_ENV=y
-# CONFIG_FEATURE_ENV_LONG_OPTIONS is not set
-CONFIG_EXPR=y
-CONFIG_EXPR_MATH_SUPPORT_64=y
-CONFIG_FALSE=y
-# CONFIG_FOLD is not set
-CONFIG_HEAD=y
-CONFIG_FEATURE_FANCY_HEAD=y
-# CONFIG_HOSTID is not set
-CONFIG_ID=y
-CONFIG_INSTALL=y
-CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
-# CONFIG_LENGTH is not set
-CONFIG_LN=y
-# CONFIG_LOGNAME is not set
-CONFIG_LS=y
-CONFIG_FEATURE_LS_FILETYPES=y
-CONFIG_FEATURE_LS_FOLLOWLINKS=y
-CONFIG_FEATURE_LS_RECURSIVE=y
-CONFIG_FEATURE_LS_SORTFILES=y
-CONFIG_FEATURE_LS_TIMESTAMPS=y
-CONFIG_FEATURE_LS_USERNAME=y
-CONFIG_FEATURE_LS_COLOR=y
-# CONFIG_FEATURE_LS_COLOR_IS_DEFAULT is not set
-CONFIG_MD5SUM=y
-CONFIG_MKDIR=y
-CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
-# CONFIG_MKFIFO is not set
-CONFIG_MKNOD=y
-CONFIG_MV=y
-# CONFIG_FEATURE_MV_LONG_OPTIONS is not set
-CONFIG_NICE=y
-CONFIG_NOHUP=y
-# CONFIG_OD is not set
-# CONFIG_PRINTENV is not set
-CONFIG_PRINTF=y
-CONFIG_PWD=y
-# CONFIG_REALPATH is not set
-CONFIG_RM=y
-CONFIG_RMDIR=y
-CONFIG_SEQ=y
-# CONFIG_SHA1SUM is not set
-CONFIG_SLEEP=y
-# CONFIG_FEATURE_FANCY_SLEEP is not set
-CONFIG_SORT=y
-# CONFIG_FEATURE_SORT_BIG is not set
-# CONFIG_SPLIT is not set
-# CONFIG_FEATURE_SPLIT_FANCY is not set
-# CONFIG_STAT is not set
-# CONFIG_FEATURE_STAT_FORMAT is not set
-CONFIG_STTY=y
-# CONFIG_SUM is not set
-CONFIG_SYNC=y
-CONFIG_TAIL=y
-# CONFIG_FEATURE_FANCY_TAIL is not set
-CONFIG_TEE=y
-# CONFIG_FEATURE_TEE_USE_BLOCK_IO is not set
-CONFIG_TEST=y
-CONFIG_FEATURE_TEST_64=y
-CONFIG_TOUCH=y
-CONFIG_TR=y
-CONFIG_FEATURE_TR_CLASSES=y
-# CONFIG_FEATURE_TR_EQUIV is not set
-CONFIG_TRUE=y
-CONFIG_TTY=y
-CONFIG_UNAME=y
-CONFIG_UNIQ=y
-CONFIG_USLEEP=y
-CONFIG_UUDECODE=y
-CONFIG_UUENCODE=y
-# CONFIG_WATCH is not set
-CONFIG_WC=y
-# CONFIG_FEATURE_WC_LARGE is not set
-# CONFIG_WHO is not set
-CONFIG_WHOAMI=y
-CONFIG_YES=y
-
-#
-# Common options for cp and mv
-#
-CONFIG_FEATURE_PRESERVE_HARDLINKS=y
-
-#
-# Common options for ls, more and telnet
-#
-CONFIG_FEATURE_AUTOWIDTH=y
-
-#
-# Common options for df, du, ls
-#
-CONFIG_FEATURE_HUMAN_READABLE=y
-
-#
-# Common options for md5sum, sha1sum
-#
-CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
-
-#
-# Console Utilities
-#
-CONFIG_CHVT=y
-CONFIG_CLEAR=y
-CONFIG_DEALLOCVT=y
-# CONFIG_DUMPKMAP is not set
-# CONFIG_LOADFONT is not set
-CONFIG_LOADKMAP=y
-CONFIG_OPENVT=y
-CONFIG_RESET=y
-# CONFIG_RESIZE is not set
-# CONFIG_FEATURE_RESIZE_PRINT is not set
-# CONFIG_SETCONSOLE is not set
-# CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS is not set
-CONFIG_SETKEYCODES=y
-# CONFIG_SETLOGCONS is not set
-
-#
-# Debian Utilities
-#
-CONFIG_MKTEMP=y
-# CONFIG_PIPE_PROGRESS is not set
-CONFIG_READLINK=y
-CONFIG_FEATURE_READLINK_FOLLOW=y
-CONFIG_RUN_PARTS=y
-CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
-# CONFIG_FEATURE_RUN_PARTS_FANCY is not set
-# CONFIG_START_STOP_DAEMON is not set
-# CONFIG_FEATURE_START_STOP_DAEMON_FANCY is not set
-# CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS is not set
-CONFIG_WHICH=y
-
-#
-# Editors
-#
-# CONFIG_AWK is not set
-# CONFIG_FEATURE_AWK_MATH is not set
-# CONFIG_ED is not set
-# CONFIG_PATCH is not set
-CONFIG_SED=y
-CONFIG_VI=y
-CONFIG_FEATURE_VI_COLON=y
-CONFIG_FEATURE_VI_YANKMARK=y
-CONFIG_FEATURE_VI_SEARCH=y
-CONFIG_FEATURE_VI_USE_SIGNALS=y
-CONFIG_FEATURE_VI_DOT_CMD=y
-CONFIG_FEATURE_VI_READONLY=y
-CONFIG_FEATURE_VI_SETOPTS=y
-CONFIG_FEATURE_VI_SET=y
-# CONFIG_FEATURE_VI_WIN_RESIZE is not set
-# CONFIG_FEATURE_VI_OPTIMIZE_CURSOR is not set
-# CONFIG_FEATURE_ALLOW_EXEC is not set
-
-#
-# Finding Utilities
-#
-CONFIG_FIND=y
-CONFIG_FEATURE_FIND_PRINT0=y
-# CONFIG_FEATURE_FIND_MTIME is not set
-# CONFIG_FEATURE_FIND_MMIN is not set
-CONFIG_FEATURE_FIND_PERM=y
-CONFIG_FEATURE_FIND_TYPE=y
-CONFIG_FEATURE_FIND_XDEV=y
-# CONFIG_FEATURE_FIND_NEWER is not set
-# CONFIG_FEATURE_FIND_INUM is not set
-CONFIG_FEATURE_FIND_EXEC=y
-CONFIG_FEATURE_FIND_USER=y
-CONFIG_FEATURE_FIND_GROUP=y
-CONFIG_FEATURE_FIND_NOT=y
-CONFIG_FEATURE_FIND_DEPTH=y
-CONFIG_FEATURE_FIND_PAREN=y
-CONFIG_FEATURE_FIND_SIZE=y
-CONFIG_FEATURE_FIND_PRUNE=y
-# CONFIG_FEATURE_FIND_DELETE is not set
-CONFIG_FEATURE_FIND_PATH=y
-CONFIG_GREP=y
-CONFIG_FEATURE_GREP_EGREP_ALIAS=y
-CONFIG_FEATURE_GREP_FGREP_ALIAS=y
-CONFIG_FEATURE_GREP_CONTEXT=y
-CONFIG_XARGS=y
-# CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION is not set
-CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
-CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
-CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
-
-#
-# Init Utilities
-#
-CONFIG_INIT=y
-# CONFIG_DEBUG_INIT is not set
-CONFIG_FEATURE_USE_INITTAB=y
-CONFIG_FEATURE_INIT_SCTTY=y
-# CONFIG_FEATURE_INIT_SYSLOG is not set
-CONFIG_FEATURE_EXTRA_QUIET=y
-# CONFIG_FEATURE_INIT_COREDUMPS is not set
-CONFIG_FEATURE_INITRD=y
-CONFIG_HALT=y
-# CONFIG_MESG is not set
-
-#
-# Login/Password Management Utilities
-#
-CONFIG_FEATURE_SHADOWPASSWDS=y
-# CONFIG_USE_BB_SHADOW is not set
-# CONFIG_USE_BB_PWD_GRP is not set
-CONFIG_ADDGROUP=y
-# CONFIG_FEATURE_ADDUSER_TO_GROUP is not set
-CONFIG_DELGROUP=y
-# CONFIG_FEATURE_DEL_USER_FROM_GROUP is not set
-CONFIG_ADDUSER=y
-CONFIG_DELUSER=y
-CONFIG_GETTY=y
-# CONFIG_FEATURE_UTMP is not set
-# CONFIG_FEATURE_WTMP is not set
-CONFIG_LOGIN=y
-# CONFIG_LOGIN_SCRIPTS is not set
-CONFIG_FEATURE_SECURETTY=y
-CONFIG_PASSWD=y
-CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
-# CONFIG_CRYPTPW is not set
-CONFIG_SU=y
-CONFIG_FEATURE_SU_SYSLOG=y
-CONFIG_FEATURE_SU_CHECKS_SHELLS=y
-CONFIG_SULOGIN=y
-# CONFIG_VLOCK is not set
-
-#
-# Linux Ext2 FS Progs
-#
-# CONFIG_CHATTR is not set
-# CONFIG_FSCK is not set
-# CONFIG_LSATTR is not set
-
-#
-# Linux Module Utilities
-#
-CONFIG_INSMOD=y
-# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
-# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
-# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
-# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
-# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set
-CONFIG_RMMOD=y
-CONFIG_LSMOD=y
-CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
-CONFIG_MODPROBE=y
-CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y
-CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y
-
-#
-# Options common to multiple modutils
-#
-CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
-# CONFIG_FEATURE_2_4_MODULES is not set
-CONFIG_FEATURE_2_6_MODULES=y
-# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set
-
-#
-# Linux System Utilities
-#
-CONFIG_DMESG=y
-CONFIG_FEATURE_DMESG_PRETTY=y
-CONFIG_FBSET=y
-CONFIG_FEATURE_FBSET_FANCY=y
-CONFIG_FEATURE_FBSET_READMODE=y
-# CONFIG_FDFLUSH is not set
-CONFIG_FDFORMAT=y
-CONFIG_FDISK=y
-CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
-CONFIG_FEATURE_FDISK_WRITABLE=y
-# CONFIG_FEATURE_AIX_LABEL is not set
-# CONFIG_FEATURE_SGI_LABEL is not set
-# CONFIG_FEATURE_SUN_LABEL is not set
-# CONFIG_FEATURE_OSF_LABEL is not set
-# CONFIG_FEATURE_FDISK_ADVANCED is not set
-CONFIG_FREERAMDISK=y
-# CONFIG_FSCK_MINIX is not set
-# CONFIG_MKFS_MINIX is not set
-# CONFIG_FEATURE_MINIX2 is not set
-CONFIG_GETOPT=y
-CONFIG_HEXDUMP=y
-CONFIG_HWCLOCK=y
-# CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS is not set
-# CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS is not set
-# CONFIG_IPCRM is not set
-# CONFIG_IPCS is not set
-CONFIG_LOSETUP=y
-CONFIG_MDEV=y
-CONFIG_FEATURE_MDEV_CONF=y
-CONFIG_FEATURE_MDEV_EXEC=y
-CONFIG_MKSWAP=y
-# CONFIG_FEATURE_MKSWAP_V0 is not set
-# CONFIG_MORE is not set
-# CONFIG_FEATURE_USE_TERMIOS is not set
-CONFIG_MOUNT=y
-# CONFIG_FEATURE_MOUNT_NFS is not set
-# CONFIG_FEATURE_MOUNT_CIFS is not set
-CONFIG_FEATURE_MOUNT_FLAGS=y
-CONFIG_FEATURE_MOUNT_FSTAB=y
-# CONFIG_PIVOT_ROOT is not set
-CONFIG_RDATE=y
-# CONFIG_READPROFILE is not set
-CONFIG_SETARCH=y
-CONFIG_SWAPONOFF=y
-CONFIG_SWITCH_ROOT=y
-CONFIG_UMOUNT=y
-CONFIG_FEATURE_UMOUNT_ALL=y
-
-#
-# Common options for mount/umount
-#
-CONFIG_FEATURE_MOUNT_LOOP=y
-# CONFIG_FEATURE_MTAB_SUPPORT is not set
-
-#
-# Miscellaneous Utilities
-#
-# CONFIG_ADJTIMEX is not set
-# CONFIG_BBCONFIG is not set
-# CONFIG_CHRT is not set
-# CONFIG_CROND is not set
-# CONFIG_DEBUG_CROND_OPTION is not set
-# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
-# CONFIG_CRONTAB is not set
-# CONFIG_DC is not set
-# CONFIG_DEVFSD is not set
-# CONFIG_DEVFSD_MODLOAD is not set
-# CONFIG_DEVFSD_FG_NP is not set
-# CONFIG_DEVFSD_VERBOSE is not set
-# CONFIG_FEATURE_DEVFS is not set
-# CONFIG_EJECT is not set
-# CONFIG_LAST is not set
-CONFIG_LESS=y
-CONFIG_FEATURE_LESS_MAXLINES=9999999
-# CONFIG_FEATURE_LESS_BRACKETS is not set
-CONFIG_FEATURE_LESS_FLAGS=y
-# CONFIG_FEATURE_LESS_FLAGCS is not set
-# CONFIG_FEATURE_LESS_MARKS is not set
-CONFIG_FEATURE_LESS_REGEXP=y
-# CONFIG_HDPARM is not set
-# CONFIG_FEATURE_HDPARM_GET_IDENTITY is not set
-# CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF is not set
-# CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF is not set
-# CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET is not set
-# CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF is not set
-# CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA is not set
-# CONFIG_MAKEDEVS is not set
-# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
-# CONFIG_FEATURE_MAKEDEVS_TABLE is not set
-CONFIG_MOUNTPOINT=y
-# CONFIG_MT is not set
-# CONFIG_NMETER is not set
-# CONFIG_RAIDAUTORUN is not set
-# CONFIG_READAHEAD is not set
-CONFIG_RUNLEVEL=y
-# CONFIG_RX is not set
-CONFIG_STRINGS=y
-# CONFIG_SETSID is not set
-# CONFIG_TASKSET is not set
-# CONFIG_FEATURE_TASKSET_FANCY is not set
-CONFIG_TIME=y
-# CONFIG_WATCHDOG is not set
-
-#
-# Networking Utilities
-#
-# CONFIG_FEATURE_IPV6 is not set
-# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
-CONFIG_ARP=y
-# CONFIG_ARPING is not set
-# CONFIG_DNSD is not set
-# CONFIG_ETHER_WAKE is not set
-# CONFIG_FAKEIDENTD is not set
-# CONFIG_FTPGET is not set
-# CONFIG_FTPPUT is not set
-# CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS is not set
-CONFIG_HOSTNAME=y
-# CONFIG_HTTPD is not set
-# CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP is not set
-# CONFIG_FEATURE_HTTPD_SETUID is not set
-# CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set
-# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set
-# CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES is not set
-# CONFIG_FEATURE_HTTPD_CGI is not set
-# CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set
-# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set
-# CONFIG_FEATURE_HTTPD_ENCODE_URL_STR is not set
-CONFIG_IFCONFIG=y
-CONFIG_FEATURE_IFCONFIG_STATUS=y
-# CONFIG_FEATURE_IFCONFIG_SLIP is not set
-# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
-# CONFIG_FEATURE_IFCONFIG_HW is not set
-# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
-CONFIG_IFUPDOWN=y
-CONFIG_FEATURE_IFUPDOWN_IP=y
-CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y
-# CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN is not set
-CONFIG_FEATURE_IFUPDOWN_IPV4=y
-# CONFIG_FEATURE_IFUPDOWN_IPV6 is not set
-# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set
-# CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP is not set
-# CONFIG_INETD is not set
-# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO is not set
-# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD is not set
-# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME is not set
-# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME is not set
-# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set
-# CONFIG_FEATURE_INETD_RPC is not set
-CONFIG_IP=y
-CONFIG_FEATURE_IP_ADDRESS=y
-CONFIG_FEATURE_IP_LINK=y
-CONFIG_FEATURE_IP_ROUTE=y
-# CONFIG_FEATURE_IP_TUNNEL is not set
-# CONFIG_FEATURE_IP_RULE is not set
-# CONFIG_FEATURE_IP_SHORT_FORMS is not set
-# CONFIG_IPADDR is not set
-# CONFIG_IPLINK is not set
-# CONFIG_IPROUTE is not set
-# CONFIG_IPTUNNEL is not set
-# CONFIG_IPRULE is not set
-# CONFIG_IPCALC is not set
-# CONFIG_FEATURE_IPCALC_FANCY is not set
-# CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set
-# CONFIG_NAMEIF is not set
-# CONFIG_NC is not set
-# CONFIG_NC_SERVER is not set
-# CONFIG_NC_EXTRA is not set
-CONFIG_NETSTAT=y
-# CONFIG_FEATURE_NETSTAT_WIDE is not set
-CONFIG_NSLOOKUP=y
-CONFIG_PING=y
-# CONFIG_PING6 is not set
-CONFIG_FEATURE_FANCY_PING=y
-CONFIG_ROUTE=y
-CONFIG_TELNET=y
-CONFIG_FEATURE_TELNET_TTYPE=y
-# CONFIG_FEATURE_TELNET_AUTOLOGIN is not set
-# CONFIG_TELNETD is not set
-# CONFIG_FEATURE_TELNETD_STANDALONE is not set
-CONFIG_TFTP=y
-CONFIG_FEATURE_TFTP_GET=y
-CONFIG_FEATURE_TFTP_PUT=y
-# CONFIG_FEATURE_TFTP_BLOCKSIZE is not set
-# CONFIG_DEBUG_TFTP is not set
-# CONFIG_TRACEROUTE is not set
-# CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set
-# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
-# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
-# CONFIG_APP_UDHCPD is not set
-# CONFIG_APP_DHCPRELAY is not set
-# CONFIG_APP_DUMPLEASES is not set
-CONFIG_APP_UDHCPC=y
-CONFIG_FEATURE_UDHCP_SYSLOG=y
-# CONFIG_FEATURE_UDHCP_DEBUG is not set
-# CONFIG_FEATURE_RFC3397 is not set
-# CONFIG_VCONFIG is not set
-CONFIG_WGET=y
-# CONFIG_FEATURE_WGET_STATUSBAR is not set
-CONFIG_FEATURE_WGET_AUTHENTICATION=y
-# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set
-# CONFIG_ZCIP is not set
-
-#
-# Process Utilities
-#
-CONFIG_FREE=y
-# CONFIG_FUSER is not set
-CONFIG_KILL=y
-CONFIG_KILLALL=y
-CONFIG_KILLALL5=y
-CONFIG_PIDOF=y
-CONFIG_FEATURE_PIDOF_SINGLE=y
-CONFIG_FEATURE_PIDOF_OMIT=y
-CONFIG_PS=y
-CONFIG_FEATURE_PS_WIDE=y
-CONFIG_RENICE=y
-CONFIG_BB_SYSCTL=y
-# CONFIG_TOP is not set
-# CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE is not set
-CONFIG_UPTIME=y
-
-#
-# Shells
-#
-CONFIG_FEATURE_SH_IS_ASH=y
-# CONFIG_FEATURE_SH_IS_HUSH is not set
-# CONFIG_FEATURE_SH_IS_LASH is not set
-# CONFIG_FEATURE_SH_IS_MSH is not set
-# CONFIG_FEATURE_SH_IS_NONE is not set
-CONFIG_ASH=y
-
-#
-# Ash Shell Options
-#
-CONFIG_ASH_JOB_CONTROL=y
-CONFIG_ASH_READ_NCHARS=y
-CONFIG_ASH_READ_TIMEOUT=y
-CONFIG_ASH_ALIAS=y
-CONFIG_ASH_MATH_SUPPORT=y
-CONFIG_ASH_MATH_SUPPORT_64=y
-CONFIG_ASH_GETOPTS=y
-CONFIG_ASH_BUILTIN_ECHO=y
-CONFIG_ASH_BUILTIN_TEST=y
-CONFIG_ASH_CMDCMD=y
-# CONFIG_ASH_MAIL is not set
-CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
-# CONFIG_ASH_RANDOM_SUPPORT is not set
-CONFIG_ASH_EXPAND_PRMT=y
-# CONFIG_HUSH is not set
-# CONFIG_HUSH_HELP is not set
-# CONFIG_HUSH_INTERACTIVE is not set
-# CONFIG_HUSH_JOB is not set
-# CONFIG_HUSH_TICK is not set
-# CONFIG_HUSH_IF is not set
-# CONFIG_HUSH_LOOPS is not set
-# CONFIG_LASH is not set
-# CONFIG_MSH is not set
-
-#
-# Bourne Shell Options
-#
-# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
-# CONFIG_FEATURE_SH_STANDALONE is not set
-# CONFIG_CTTYHACK is not set
-
-#
-# System Logging Utilities
-#
-# CONFIG_SYSLOGD is not set
-# CONFIG_FEATURE_ROTATE_LOGFILE is not set
-# CONFIG_FEATURE_REMOTE_LOG is not set
-# CONFIG_FEATURE_IPC_SYSLOG is not set
-CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=
-# CONFIG_LOGREAD is not set
-# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set
-# CONFIG_KLOGD is not set
-# CONFIG_LOGGER is not set
-
-#
-# Runit Utilities
-#
-# CONFIG_RUNSV is not set
-# CONFIG_RUNSVDIR is not set
-# CONFIG_SV is not set
-# CONFIG_SVLOGD is not set
-# CONFIG_CHPST is not set
-# CONFIG_SETUIDGID is not set
-# CONFIG_ENVUIDGID is not set
-# CONFIG_ENVDIR is not set
-# CONFIG_SOFTLIMIT is not set
-# CONFIG_CHCON is not set
-# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
-# CONFIG_GETENFORCE is not set
-# CONFIG_GETSEBOOL is not set
-# CONFIG_LOAD_POLICY is not set
-# CONFIG_MATCHPATHCON is not set
-# CONFIG_RUNCON is not set
-# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
-# CONFIG_SELINUXENABLED is not set
-# CONFIG_SETENFORCE is not set
-
-#
-# ipsvd utilities
-#
-# CONFIG_TCPSVD is not set
-# CONFIG_UDPSVD is not set

target/device/x86/i686/i386_defconfig

@@ -1,9 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Thu Jan 29 19:58:33 2009
+# Wed May 13 01:39:19 2009
 #
 BR2_HAVE_DOT_CONFIG=y
-BR2_VERSION="2009.02-svn"
+BR2_VERSION="2009.05-rc1"
 # BR2_alpha is not set
 # BR2_arm is not set
 # BR2_armeb is not set
@@ -21,10 +21,10 @@ BR2_i386=y
 # BR2_sparc is not set
 # BR2_sparc64 is not set
 # BR2_x86_64 is not set
-# BR2_x86_i386 is not set
+BR2_x86_i386=y
 # BR2_x86_i486 is not set
 # BR2_x86_i586 is not set
-BR2_x86_i686=y
+# BR2_x86_i686 is not set
 # BR2_x86_pentiumpro is not set
 # BR2_x86_pentium_mmx is not set
 # BR2_x86_pentium_m is not set
@@ -45,10 +45,10 @@ BR2_x86_i686=y
 # BR2_x86_c3 is not set
 # BR2_x86_winchip_c6 is not set
 # BR2_x86_winchip2 is not set
-BR2_ARCH="i686"
+BR2_ARCH="i386"
 BR2_ENDIAN="LITTLE"
-BR2_GCC_TARGET_TUNE="i686"
-BR2_GCC_TARGET_ARCH="i686"
+BR2_GCC_TARGET_TUNE="i386"
+BR2_GCC_TARGET_ARCH="i386"
 
 #
 # Target options
@@ -64,17 +64,22 @@ BR2_BANNER="Welcome to the Erik's uClibc development environment."
 #
 # Preset Devices
 #
-BR2_BOARD_NAME="i386"
+# BR2_TARGET_AMD is not set
+BR2_BOARD_NAME="i686"
 BR2_BOARD_PATH="target/device/x86/$(BR2_BOARD_NAME)"
 BR2_TARGET_X86=y
-BR2_TARGET_I386=y
+BR2_TARGET_I686=y
 
 #
 # Generic System Support
 #
 # BR2_TARGET_GENERIC_ACCESS_POINT is not set
 # BR2_TARGET_GENERIC_FIREWALL is not set
-# BR2_TARGET_GENERIC_DEV_SYSTEM is not set
+
+#
+# Generic development system requires a toolchain with WCHAR and PROGRAM_INVOCATION support
+#
+# BR2_TARGET_GENERIC_GETTY is not set
 
 #
 # Build options
@@ -108,8 +113,6 @@ BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir"
 # BR2_FPU_SUFFIX is not set
 BR2_TOPDIR_PREFIX=""
 BR2_TOPDIR_SUFFIX=""
-BR2_ROOTFS_PREFIX="rootfs"
-BR2_ROOTFS_SUFFIX=""
 BR2_GNU_BUILD_SUFFIX="pc-linux-gnu"
 BR2_GNU_TARGET_SUFFIX="linux-uclibc"
 BR2_JLEVEL=1
@@ -149,41 +152,31 @@ BR2_EXT_BINUTILS_VERSION_2_18=y
 BR2_EXT_UCLIBC_VERSION_0_9_28_3=y
 BR2_EXT_UCLIBC_VERSION_0_9_29=y
 BR2_EXT_UCLIBC_VERSION_0_9_30=y
+BR2_EXT_UCLIBC_VERSION_0_9_30_1=y
 
 #
 # Kernel Header Options
 #
-# BR2_KERNEL_HEADERS_2_4_31 is not set
-# BR2_KERNEL_HEADERS_2_6_20_4 is not set
-# BR2_KERNEL_HEADERS_2_6_20 is not set
-# BR2_KERNEL_HEADERS_2_6_21_5 is not set
-# BR2_KERNEL_HEADERS_2_6_21 is not set
-# BR2_KERNEL_HEADERS_2_6_22_1 is not set
-# BR2_KERNEL_HEADERS_2_6_22_10 is not set
-# BR2_KERNEL_HEADERS_2_6_22 is not set
 # BR2_KERNEL_HEADERS_2_6_23 is not set
 # BR2_KERNEL_HEADERS_2_6_24 is not set
 # BR2_KERNEL_HEADERS_2_6_25 is not set
 # BR2_KERNEL_HEADERS_2_6_26 is not set
 # BR2_KERNEL_HEADERS_2_6_27 is not set
-BR2_KERNEL_HEADERS_2_6_28=y
+# BR2_KERNEL_HEADERS_2_6_28 is not set
+BR2_KERNEL_HEADERS_2_6_29=y
 # BR2_KERNEL_HEADERS_SNAP is not set
-BR2_DEFAULT_KERNEL_HEADERS="2.6.28.2"
+BR2_DEFAULT_KERNEL_HEADERS="2.6.29.2"
 
 #
 # uClibc Options
 #
 # BR2_UCLIBC_VERSION_0_9_28_3 is not set
-BR2_UCLIBC_VERSION_0_9_29=y
+# BR2_UCLIBC_VERSION_0_9_29 is not set
 # BR2_UCLIBC_VERSION_0_9_30 is not set
+BR2_UCLIBC_VERSION_0_9_30_1=y
 # BR2_UCLIBC_VERSION_SNAPSHOT is not set
+BR2_UCLIBC_VERSION_STRING="0.9.30.1"
 BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.29.config"
-BR2_ENABLE_LOCALE=y
-# BR2_ENABLE_LOCALE_PREGENERATED is not set
-# BR2_PTHREADS_NONE is not set
-# BR2_PTHREADS is not set
-BR2_PTHREADS_OLD=y
-# BR2_PTHREADS_NATIVE is not set
 # BR2_PTHREAD_DEBUG is not set
 # BR2_UCLIBC_PROGRAM_INVOCATION is not set
 # BR2_UCLIBC_INSTALL_TEST_SUITE is not set
@@ -193,14 +186,15 @@ BR2_PTHREADS_OLD=y
 #
 # BR2_BINUTILS_VERSION_2_17 is not set
 # BR2_BINUTILS_VERSION_2_17_50_0_17 is not set
-BR2_BINUTILS_VERSION_2_18=y
+# BR2_BINUTILS_VERSION_2_18 is not set
 # BR2_BINUTILS_VERSION_2_18_50_0_1 is not set
 # BR2_BINUTILS_VERSION_2_18_50_0_3 is not set
 # BR2_BINUTILS_VERSION_2_18_50_0_6 is not set
 # BR2_BINUTILS_VERSION_2_18_50_0_8 is not set
 # BR2_BINUTILS_VERSION_2_18_50_0_9 is not set
 # BR2_BINUTILS_VERSION_2_19 is not set
-BR2_BINUTILS_VERSION="2.18"
+BR2_BINUTILS_VERSION_2_19_1=y
+BR2_BINUTILS_VERSION="2.19.1"
 BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""
 
 #
@@ -214,16 +208,16 @@ BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""
 # BR2_GCC_VERSION_4_2_3 is not set
 # BR2_GCC_VERSION_4_2_4 is not set
 # BR2_GCC_VERSION_4_3_1 is not set
-BR2_GCC_VERSION_4_3_2=y
+# BR2_GCC_VERSION_4_3_2 is not set
+# BR2_GCC_VERSION_4_3_3 is not set
+BR2_GCC_VERSION_4_4_X=y
 BR2_GCC_SUPPORTS_SYSROOT=y
 BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE=y
-BR2_GCC_VERSION="4.3.2"
+BR2_GCC_VERSION="4.4.0"
 BR2_TOOLCHAIN_SYSROOT=y
 # BR2_GCC_USE_SJLJ_EXCEPTIONS is not set
 BR2_EXTRA_GCC_CONFIG_OPTIONS=""
-BR2_GCC_CROSS_CXX=y
 # BR2_GCC_CROSS_FORTRAN is not set
-BR2_INSTALL_LIBSTDCPP=y
 # BR2_INSTALL_LIBGCJ is not set
 # BR2_INSTALL_OBJC is not set
 # BR2_INSTALL_FORTRAN is not set
@@ -240,45 +234,46 @@ BR2_GCC_SHARED_LIBGCC=y
 # BR2_PACKAGE_GDB is not set
 BR2_PACKAGE_GDB_SERVER=y
 # BR2_PACKAGE_GDB_HOST is not set
-# BR2_GDB_VERSION_6_2_1 is not set
-# BR2_GDB_VERSION_6_3 is not set
 # BR2_GDB_VERSION_6_4 is not set
 # BR2_GDB_VERSION_6_5 is not set
 # BR2_GDB_VERSION_6_6 is not set
 # BR2_GDB_VERSION_6_7_1 is not set
 BR2_GDB_VERSION_6_8=y
-# BR2_GDB_VERSION_SNAPSHOT is not set
 BR2_GDB_VERSION="6.8"
 
 #
 # Common Toolchain Options
 #
+BR2_LARGEFILE=y
+BR2_INET_IPV6=y
+BR2_INET_RPC=y
+BR2_ENABLE_LOCALE=y
+# BR2_ENABLE_LOCALE_PREGENERATED is not set
+# BR2_ENABLE_LOCALE_PURGE is not set
+BR2_USE_WCHAR=y
+# BR2_USE_SSP is not set
+# BR2_PTHREADS_NONE is not set
+# BR2_PTHREADS is not set
+BR2_PTHREADS_OLD=y
+# BR2_PTHREADS_NATIVE is not set
+BR2_GCC_CROSS_CXX=y
+BR2_INSTALL_LIBSTDCPP=y
+BR2_TARGET_OPTIMIZATION="-Os -pipe"
 # BR2_MKLIBS is not set
 # BR2_PACKAGE_SSTRIP_TARGET is not set
 # BR2_PACKAGE_SSTRIP_HOST is not set
 # BR2_ENABLE_MULTILIB is not set
-BR2_LARGEFILE=y
-BR2_INET_IPV6=y
-BR2_INET_RPC=y
-BR2_USE_WCHAR=y
-BR2_TARGET_OPTIMIZATION="-Os -pipe"
 BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y
 
 #
 # Package Selection for the target
 #
 BR2_PACKAGE_BUSYBOX=y
-# BR2_BUSYBOX_VERSION_1_2_2_1 is not set
-# BR2_BUSYBOX_VERSION_1_6_1 is not set
-# BR2_BUSYBOX_VERSION_1_7_X is not set
-# BR2_BUSYBOX_VERSION_1_8_X is not set
-# BR2_BUSYBOX_VERSION_1_9_X is not set
-# BR2_BUSYBOX_VERSION_1_10_X is not set
-# BR2_BUSYBOX_VERSION_1_11_X is not set
 # BR2_BUSYBOX_VERSION_1_12_X is not set
-BR2_BUSYBOX_VERSION_1_13_X=y
+# BR2_BUSYBOX_VERSION_1_13_X is not set
+BR2_BUSYBOX_VERSION_1_14_X=y
 # BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
-BR2_BUSYBOX_VERSION="1.13.4"
+BR2_BUSYBOX_VERSION="1.14.0"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 BR2_PACKAGE_BUSYBOX_HIDE_OTHERS=y
@@ -311,6 +306,7 @@ BR2_HOST_FAKEROOT=y
 # BR2_PACKAGE_LIBTOOL is not set
 # BR2_PACKAGE_M4 is not set
 # BR2_PACKAGE_OPROFILE is not set
+# BR2_PACKAGE_PKG_CONFIG is not set
 # BR2_PACKAGE_READLINE is not set
 # BR2_PACKAGE_VALGRIND is not set
 # BR2_PACKAGE_PCRE is not set
@@ -322,7 +318,10 @@ BR2_HOST_FAKEROOT=y
 # BR2_PACKAGE_BEECRYPT is not set
 # BR2_PACKAGE_BERKELEYDB is not set
 # BR2_PACKAGE_BSDIFF is not set
-# BR2_PACKAGE_CUPS is not set
+
+#
+# cups requires a toolchain with Stack Protection support
+#
 # BR2_PACKAGE_CUSTOMIZE is not set
 # BR2_PACKAGE_FILE is not set
 # BR2_PACKAGE_GAMIN is not set
@@ -349,6 +348,7 @@ BR2_HOST_FAKEROOT=y
 # BR2_PACKAGE_NG_SPICE_REWORK is not set
 # BR2_PACKAGE_POPT is not set
 # BR2_PACKAGE_SCREEN is not set
+# BR2_PACKAGE_SHARED_MIME_INFO is not set
 # BR2_PACKAGE_STARTUP_NOTIFICATION is not set
 # BR2_PACKAGE_STRACE is not set
 # BR2_PACKAGE_SUDO is not set
@@ -378,10 +378,7 @@ BR2_HOST_FAKEROOT=y
 # BR2_PACKAGE_IFPLUGD is not set
 # BR2_PACKAGE_IPERF is not set
 # BR2_PACKAGE_IPROUTE2 is not set
-
-#
-# ipsec-tools	- disabled (requires openssl, flex and the flex library (libfl.a) )
-#
+# BR2_PACKAGE_IPSEC_TOOLS is not set
 # BR2_PACKAGE_IPTABLES is not set
 # BR2_PACKAGE_KISMET is not set
 # BR2_PACKAGE_L2TP is not set
@@ -392,11 +389,11 @@ BR2_HOST_FAKEROOT=y
 # BR2_PACKAGE_LIBEXOSIP2 is not set
 # BR2_PACKAGE_LIBOSIP2 is not set
 # BR2_PACKAGE_LIBPCAP is not set
+# BR2_PACKAGE_LIBSOUP is not set
 # BR2_PACKAGE_LIBUPNP is not set
 # BR2_PACKAGE_LINKS is not set
 # BR2_PACKAGE_LRZSZ is not set
 # BR2_PACKAGE_MDNSRESPONDER is not set
-# BR2_PACKAGE_MICROCOM is not set
 # BR2_PACKAGE_MIIDIAG is not set
 # BR2_PACKAGE_MROUTED is not set
 # BR2_PACKAGE_MUTT is not set
@@ -414,7 +411,6 @@ BR2_HOST_FAKEROOT=y
 # BR2_PACKAGE_OPENSSH is not set
 # BR2_PACKAGE_OPENSSL is not set
 # BR2_PACKAGE_OPENVPN is not set
-# BR2_PACKAGE_OPENSWAN is not set
 # BR2_PACKAGE_PORTMAP is not set
 # BR2_PACKAGE_PPPD is not set
 # BR2_PACKAGE_RADVD is not set
@@ -448,6 +444,7 @@ BR2_HOST_FAKEROOT=y
 # BR2_PACKAGE_VTUN is not set
 # BR2_PACKAGE_WEBIF is not set
 # BR2_PACKAGE_WIRELESS_TOOLS is not set
+# BR2_PACKAGE_WPA_SUPPLICANT is not set
 
 #
 # Hardware handling / blockdevices and filesystem maintenance
@@ -457,6 +454,10 @@ BR2_HOST_FAKEROOT=y
 #
 # dbus not available (need expat or libxml2)
 #
+
+#
+# dbus-glib needs dbus to be compiled with expat support
+#
 # BR2_PACKAGE_DEVMEM2 is not set
 # BR2_PACKAGE_DM is not set
 # BR2_PACKAGE_DMRAID is not set
@@ -507,7 +508,7 @@ BR2_PACKAGE_MTD_NANDWRITE=y
 BR2_PACKAGE_MTD_NFTL_FORMAT=y
 BR2_PACKAGE_MTD_NFTLDUMP=y
 BR2_PACKAGE_MTD_SUMTOOL=y
-# BR2_PACKAGE_NTFS-3G is not set
+# BR2_PACKAGE_NTFS_3G is not set
 # BR2_PACKAGE_PCIUTILS is not set
 # BR2_PACKAGE_PCMCIA is not set
 # BR2_PACKAGE_SETSERIAL is not set
@@ -526,6 +527,7 @@ BR2_PACKAGE_MTD_SUMTOOL=y
 # asterisk	- disabled (required openssl and mpg123)
 #
 # BR2_PACKAGE_AUMIX is not set
+# BR2_PACKAGE_FLAC is not set
 # BR2_PACKAGE_GSTREAMER is not set
 # BR2_PACKAGE_LIBID3TAG is not set
 # BR2_PACKAGE_LIBMAD is not set
@@ -533,15 +535,13 @@ BR2_PACKAGE_MTD_SUMTOOL=y
 # BR2_PACKAGE_LIBOGG is not set
 # BR2_PACKAGE_LIBSNDFILE is not set
 # BR2_PACKAGE_LIBTHEORA is not set
-
-#
-# libvorbis requires the package libogg to build
-#
+# BR2_PACKAGE_LIBVORBIS is not set
 # BR2_PACKAGE_MADPLAY is not set
 # BR2_PACKAGE_MPG123 is not set
 # BR2_PACKAGE_MPLAYER is not set
 # BR2_PACKAGE_SPEEX is not set
 # BR2_PACKAGE_FESTIVAL is not set
+# BR2_PACKAGE_TAGLIB is not set
 # BR2_PACKAGE_VLC is not set
 
 #
@@ -597,6 +597,7 @@ BR2_PACKAGE_XSERVER_none=y
 # X libraries and helper libraries
 #
 # BR2_PACKAGE_ATK is not set
+# BR2_PACKAGE_CAIRO is not set
 # BR2_PACKAGE_PANGO is not set
 # BR2_PACKAGE_LIBDRM is not set
 # BR2_PACKAGE_LIBERATION is not set
@@ -622,6 +623,7 @@ BR2_PACKAGE_XSERVER_none=y
 # dillo		- disabled (requires jpeg,libglib12,libgtk12,zlib,libpng and Xorg(7))
 #
 # BR2_PACKAGE_GQVIEW is not set
+# BR2_PACKAGE_GOB2 is not set
 # BR2_PACKAGE_LEAFPAD is not set
 
 #
@@ -639,6 +641,7 @@ BR2_PACKAGE_XSERVER_none=y
 # Compressors / decompressors
 #
 BR2_PACKAGE_LZO=y
+# BR2_PACKAGE_LZOP is not set
 # BR2_PACKAGE_LZMA_TARGET is not set
 # BR2_PACKAGE_LZMA_HOST is not set
 BR2_PACKAGE_ZLIB=y
@@ -687,6 +690,8 @@ BR2_PACKAGE_ZLIB=y
 #
 # Target filesystem options
 #
+BR2_ROOTFS_PREFIX="rootfs"
+BR2_ROOTFS_SUFFIX=""
 
 #
 # filesystem for target device
@@ -708,7 +713,6 @@ BR2_TARGET_ROOTFS_JFFS2_EBSIZE=0x20000
 # BR2_TARGET_ROOTFS_JFFS2_PAD is not set
 BR2_TARGET_ROOTFS_JFFS2_LE=y
 # BR2_TARGET_ROOTFS_JFFS2_BE is not set
-# BR2_TARGET_ROOTFS_JFFS2_SQUASH is not set
 # BR2_TARGET_ROOTFS_JFFS2_SUMMARY is not set
 BR2_TARGET_ROOTFS_JFFS2_OUTPUT="$(IMAGE).jffs2"
 BR2_TARGET_ROOTFS_JFFS2_COPYTO=""
@@ -738,8 +742,9 @@ BR2_KERNEL_LINUX_ADVANCED=y
 BR2_PACKAGE_LINUX=y
 BR2_PACKAGE_LINUX_KCONFIG="target/device/x86/i386/linux-$(BR2_LINUX26_VERSION).config"
 BR2_PACKAGE_LINUX_FORMAT="bzImage"
-BR2_KERNEL_CURRENT_VERSION="2.6.28.2"
-BR2_KERNEL_LATEST_2_6_28="2"
+BR2_KERNEL_CURRENT_VERSION="2.6.29.2"
+BR2_KERNEL_LATEST_2_6_29="2"
+BR2_KERNEL_LATEST_2_6_28="7"
 BR2_KERNEL_LATEST_2_6_27="13"
 BR2_KERNEL_LATEST_2_6_26="8"
 BR2_KERNEL_LATEST_2_6_25="19"
@@ -752,6 +757,7 @@ BR2_KERNEL_SITE="http://ftp.kernel.org/pub/linux/kernel/v2.6"
 BR2_MM_PATCH_SITE="http://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6"
 BR2_RC_MM_PATCH_DIR="$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)/2.6.$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)-mm$(BR2_KERNEL_MM_LEVEL)"
 BR2_LINUX_2_6_STABLE=y
+# BR2_LINUX_2_6_29 is not set
 # BR2_LINUX_2_6_28 is not set
 # BR2_LINUX_2_6_27 is not set
 # BR2_LINUX_2_6_26 is not set
@@ -761,7 +767,6 @@ BR2_LINUX_2_6_STABLE=y
 # BR2_LINUX_2_6_22 is not set
 # BR2_LINUX_2_6_21 is not set
 # BR2_LINUX_2_6_20 is not set
-# BR2_LINUX_2_6_29 is not set
 # BR2_LINUX26_CUSTOM is not set
 
 #