This reverts commit b7acacaf6e.
Closes#1855
We DO need to install into staging for all the xdriver-* packages,
so revert this commit.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#1789
This reverts commit 6b939d40f6.
The problem this commit tries to fix is valid, but the fix unfortunately
seems to cause worse problems on certain distributions/setups, so revert
for now.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use the correct CFLAGS from BR and not just the LDFLAGS. This is especially
important for external toolchain setups, but the lockfile-progs buildsystem
also hardcodes -Werror, which breaks the build in certain setups.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Due to recent 3.2.4 release, 3.2.2 download address has changed, so
I prefered bump version to 3.2.4 rather than changing NCFTP_SITE.
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gdbserver dlopen(3)s libthread_db.so at runtime, so there is no
dependency on it (does not appear as being (NEEDED)).
Copy libthread_db.so from external toolchain when gdbserver is enbled.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If threads are disabled, do not try to copy the libpthread.so from the
external library.
It is still expected that the BR configuration matches the external
toolchain setup, and no check is done to enforce that.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Xserver installation fails with parallel make jobs.
Installation to staging is not needed. So just remove it
instead of converting to $(MAKE1).
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
coreutils: add 'join' to the list of files that are copied to target
rootfs.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The legacy zImage target for x86 was removed from the kernel in 2.6.30,
and we state in Config.in that we'll use bzImage if BR2_PACKAGE_LINUX_FORMAT
isn't set, so ensure we do so for x86.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The configure script contains a buggy test for the bool datatype and
it's size. This is normally not a big deal as the result isn't used
for anything, but when BR2_CONFIG_CACHE (default) is used, the
wrong ac_cv_type_bool result is stored in the cache, and other packages
like libcurl DO need the bool type, so that breaks the build.
Fix it by presetting those tests to sane values.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make sure alsa-lib is built before gst-plugins-base if enabled, so
configure detects the presence of alsa and builds alsasink/src.
Reported-by: Phil Edworthy <Phil.Edworthy@renesas.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add ttymxc[0-2] to the list is the /etc/securetty of the Busybox skeleton.
This is useful for serial logins on i.MX based systems. The same serial
devices already appear in the generic "target_skeleton/".
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gettext needs WCHAR support in the toolchain, and as libglib2 depends on
gettext and lots of stuff depends on libglib2, quite a lot of packages
needs to have their dependencies adjusted.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead use the same logic as in libgtk2. The rendering target selected
MUST be the same as libgtk2's, so just figure it out automatically
instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gstreamer has complicated dependencies (because of glib2), so use
depends on rather than select. At the same time default phonon support
to Y if gstreamer is available, as this support is likely wanted.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gstreamer has complicated dependencies (because of glib2), so use
depends on rather than select, similar to how it is done for gtk2.
At the same time default gtk/gstreamer support to Y if those are
available, as they are likely wanted.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libgtk2 can either use the X11 or directfb backend, depending on what
is selected - But if other packages 'select' libgtk2 there is no
guarantee that any backends are enabled, breaking the build.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Having a BR2_NEEDS_GETTEXT option, as introduced by
54d64798e1 isn't sufficient to express
the different kind of dependencies on gettext.
This commit, based on an idea by Peter Korsgaard, introduces two
different options :
* BR2_NEEDS_GETTEXT, which is true as soon as the toolchain doesn't
provide gettext itself (i.e, when the toolchain is uClibc based, be
it an internal or external toolchain)
* BR2_NEEDS_GETTEXT_IF_LOCALE, which is true when the toolchain
doesn't provide gettext *and* locale support has been enabled in
Buildroot.
A following commit adds some documentation that details how these
configuration variables should be used by packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Closes#1819
Fix two issues with pciutils:
- pciutils would look in /usr/share/misc for pci.ids, but install it in
/usr/share. This is because pciutils doesn't use a ./configure script,
so we have to also provide the configuration (make) arguments when
we run make install as well. Fix it by making it look into /usr/share
as that's simpler to do, and is what upstream does.
- the update-pciids script would call wget with the --no-timestamping
option, which isn't supported by busybox wget. Fix it by simply
removing that option as it isn't really critical.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Contrary to the comment in Config.in, mutt isn't broken when wchar
is enabled - In fact, it doesn't build without it.
Add BR2_USE_WCHAR dependency to make this clear.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix two issues with the icu build:
- icu source contains an #elif without any arguments, which g++ >= 4.4
flags as an error. This is both an issue for target and host build,
so restructure the .mk so any *both*patch is applied to both builds
(the other patches would cause trouble with host builds)
- icu build system isn't parallel make safe, use MAKE1
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
atngw100_defconfig: update to fix build failure:
* The AVR32 toolchain fails to build with the new uClibc version
0.9.31.x. Use the older uClibc 0.9.30.x branch instead.
* Disable linux-fusion as it fails to build
(why was this selected anyway, when DirectFB was not selected?).
* U-Boot 2010.03 is broken for AVR32. The build fails with:
zlib.c:31:27: error: asm/unaligned.h: No such file or directory
Select the older U-Boot 2009.08 version that builds instead.
* Disable rsync as it fails to build.
Build tested with 'make distclean && make atngw100_defconfig && make'
on an Ubuntu 10.04 x86_64 host.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Having . in the PATH makes the toolchain build process fail because it
confuses host tools and target tools.
This fixes bug #75.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Things like LD_LIBRARY_PATH=. or even LD_LIBRARY_PATH=.:/usr/lib were
not detected as incorrect.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise u-boot tools / kernel modules are only added to target AFTER
the filesystems are built.
Long term u-boot/kernel stuff should get splitted from target/device,
but this is the safest solution for now.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The build of fltk was failing due to an issue in the usage of
scandir(). This issue is fixed by a new patch,
fltk-1.1.7-scandir-fix.patch. Moreover, this problem was not
necessarly visible, as the build process of FLTK didn't bail out with
an error when it was failing. This if fixed by
fltk-1.1.7-bail-out-on-error.patch. Finally, there was a problem with
the tests of FLTK, so we disabled them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Slightly improve the package type detection heuristic, and fix a small
bug about package/multimedia/multimedia.mk exclusion.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a Python script that draws dependency graphs, either for the full
set of selected packages, or for a particular given package. Of
course, it is limited to packages that use either the generic or
autotools infrastructures. The script generates a file that Graphviz
can parse and generate a PDF (or other formats) from it.
Full dependency graph of all selected packages :
./scripts/graph-depends > test.dot
dot -Tpdf test.dot -o test.pdf
Dependency graph of libgtk2 :
./scripts/graph-depends libgtk2 > test.dot
dot -Tpdf test.dot -o test.pdf
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The new <pkg>-show-depends simply outputs the list of dependencies for
the given package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The recent change to use config.guess to figure out GNU_HOST_NAME
broken the x86x86fix detection for 32bit hosts, as config.guess
returns something like i686-pc-linux-gnu rather than something with
*-unknown-linux-* like we used to use.
Fix it by simply looking for "linux" instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There is a build problem with netsnmp on external toolchain that isn't
easy to fix: libtool strips the --sysroot that we are passing it,
which make the link step fail.
In preparation for the release, just make sure this package isn't
visible to external toolchain users. Of course, on the long run, we
should fix this.
We also disable the build of the Quagga SNMP support because it
selects netsnmp.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
External toolchain builds absolutely require the --sysroot option to
be passed at link time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Without CFLAGS, the build breaks because --sysroot is missing at link
time, and this option is absolutely mandatory for external toolchain
builds.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since lvm2 uses autoconf, there's no point in overriding CC and other
variables at build time. This causes build breakage as CFLAGS aren't
used at link time, therefore --sysroot lacks, which breaks the build
with external toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mutt has been upgraded, but the mutt-1.5.16-makedoc-hostcc.patch
wasn't upgraded accordingly, causing build failures in the
documentation. Therefore, we add a new patch
mutt-1.5.17+20080114-nodoc.patch that disables the construction of the
documentation.
As this patch modifies Makefile.am, we need to autoreconf the
package. The simplest and cleanest way to do this is to convert the
package to the autotools infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we no longer need to build pango on the host, cairo on the host
is no longer needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We needed to build pango for the host in order to compile
pango-querymodules for the host, which was used to produce
/etc/pango/pango.modules. Unfortunately:
* This produces an incorrect /etc/pango/pango.modules (no modules
detected in my case), probably because the host pango-querymodules
was looking at host pango modules
* This requires to build pango for the host, which requires to build
cairo for the host, which requires to build X11 for the host.
To make things work and remove the dependency between pango and
host-pango, we introduce a S25pango script that creates
/etc/pango/pango.modules on startup if it doesn't exist, just as we do
with libgtk2 for /etc/gtk-2.0/gdk-pixbuf.loaders.
Since host-pango is no longer needed, we remove all definitions
related to it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds a patch to NTP to fix the following build failure,
using a workaround patch found on the Fedora bugzilla:
ntp_loopfilter.c: In function 'local_clock':
ntp_loopfilter.c:571: error: 'MOD_NANO' undeclared (first use in this function)
ntp_loopfilter.c:571: error: (Each undeclared identifier is reported only once
ntp_loopfilter.c:571: error: for each function it appears in.)
ntp_loopfilter.c: In function 'loop_config':
ntp_loopfilter.c:896: error: 'MOD_NANO' undeclared (first use in this function)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package uses several pmap_*() functions in the C library, that
are only available if the C library has RPC support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A C library compiled with locale support already has an iconv()
implementation. In that case, libiconv is useless. Therefore, disallow
the selection of libiconv when the configuration says that the
toolchain has locale support.
This fixes build issues similar to the one we had with gettext:
libiconv headers are installed, but -liconv is not added because the
./configure script detects that the C library supports iconv.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Verify that the value of BR2_INSTALL_LIBSTDCPP set by the user in the
Buildroot configuration really matches the external toolchain
capabilities by checking that a C++ cross-compiler is available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This allows to make sure that an user, or a randpackageconfig, will
not select the gettext or libintl package when using an external
toolchain based on glibc/eglibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ltrace failed to build because of missing arguments to gcc to find the
header files. This is due to the fact that the existing ltrace.mk was
setting CC and LD at build time to incorrect values. Keeping the
values set at configure time is just the right thing to do.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch had an incorrect name, and the libtool patch was applied
while it shouldn't, and the package wasn't autoreconfed while the
patch changes some Makefile.am files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On a x86-64 host, libcap tried to install things in
$(STAGING_DIR)/lib64 and $(TARGET_DIR)/lib64. Therefore, pass lib= and
prefix=, as required by the strange build system used by libcap.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using an external toolchain that uses the glibc or eglibc C
libraries, compiling a separate gettext and libintl is not needed and
is even a source of confusion, causing build failures. These build
failures are due to the fact that when libintl is compiled, it
replaces the C library libintl.h by its own, which does #define
gettext libintl_gettext. Then, when packages want to use gettext,
autoconf realize that gettext is available in the C library and
therefore do not add -lintl to the LDFLAGS, causing the build failure
because the program has been compiled to use libintl_gettext but this
function is not available.
Therefore, we should only use gettext if a uClibc internal toolchain
or a uClibc external toolchain. If an external glibc toolchain is
used, gettext shouldn't be used.
In order to implement that, we introduce the BR2_NEEDS_GETTEXT option,
which is hidden to the user, and whose value is computed automatically
from the rest of the configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
New versions of the 2.6.32 and 2.6.33 kernel were released today
and it is suggested that all users should upgrade.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes the ULONG_MAX definition problem:
In file included from cache.c:43:
../include/netlink-local.h: In function '__str2type':../include/netlink-local.h:218: error: 'ULONG_MAX' undeclared (first use in this function)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
netplug uses nested functions, and gcc generates a warning that
is turned into an error:
cc1: warnings being treated as errors
if_info.c: In function 'ifsm_scriptdone':
if_info.c:289: error: generating trampoline in object (requires executable stack)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The less package already selects BR2_PACKAGE_CURSES, but it fails to
depend on it in the makefile. Therefore, there are cases where less
gets built before curses, and the build fails:
checking for working terminal libraries... Cannot find terminal libraries - configure failed
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When OpenSSL is not enabled, hostapd relies on an internal
library. However, this library must be enabled, otherwise the
compilation of hostapd fails with:
/home/test/ctng-arm-eglibc/bin/../lib/gcc/arm-unknown-linux-gnueabi/4.3.4/../../../../arm-unknown-linux-gnueabi/bin/ld: cannot find -ltommath
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Version 4.1.5 fails to build due to the infamous getline() conflict
issue. 4.2.1 doesn't have this problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Before 2010.02, VLC didn't build, because it didn't pass the
appropriate --disable- options according to the libraries available in
Buildroot. Now, 2010.05 is going to be released, and no one bothered
to fix VLC. Therefore, let's mark VLC as broken.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
linux-fusion is composed of a kernel module, and linux-fusion.mk uses
several variable definitions that only exist when Buildroot compiles a
kernel.
We also add the same dependency to BR2_PACKAGE_DIRECTFB_MULTI, which
relies on linux-fusion.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some python versions print x.y rather than x.y.z as version number, so
make regexp more robust.
Reported-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libgcrypt depends on libgpg-error, but it needs to know where the
gpg-error-config utility is.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
hal integrates its own version of intltool tools, but they require
libxml-parser-perl to be installed on the host.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For some unknown reason, gawk.mk was overriding CC to $(TARGET_CC) at
build time, while it had already been set at configure time to
"$(TARGET_CC) $(TARGET_CFLAGS)" which is already the good value.
Setting it to just $(TARGET_CC) breaks the compilation with external
toolchains because we must pass the --sysroot option. But anyway, this
was incorrect as we were loosing some CFLAGS set by Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When neither CLI nor CGI is selected, PHP's configure script fails
with:
checking whether to build CGI binary... configure: error: No SAPIs selected.
Of couse, the help text of the options says that at least one of them
should be selected, but when doing testing with randpackageconfig,
noone is reading these help texts.
Therefore, based on the suggestion of Yann E. Morin, modify the
Config.in organization so that at least one of the option is selected.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We need to pass CFLAGS and LDFLAGS, and to rename the patch so that it
actually gets applied.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Pass CFLAGS and LDFLAGS so that when building squashfs, it finds the
zlib installed in $(HOST_DIR).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When xlib_libX11 was bumped to 1.3.2 in commit
1d956c9190, the keysymdef patch was
dropped. However, this patch is still needed in order to be able to
tell ./configure where the keysymdef header file is installed.
The patch has been updated for 1.3.2.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building libxcb, the variable XCBPROTO_XCBPYTHONDIR must point to
the location where the Python modules needed to run the c_client.py
program are installed. The path
$(STAGING_DIR)/usr/lib/python2.6/site-packages was hardcoded. However,
it doesn't work when the version of Python installed on the host is
Python 2.5.
Therefore, add a little bit of magic to compute the host Python
version.
We also verify that Python is available on the host, as we don't build
it in Buildroot.
Fixes bug #1531.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The MTD utils require MTD headers in the toolchain, and in several
external toolchains, they are not present. In order to make the build
work by default, let's disable the MTD Busybox applets in our default
configuration.
Fixes bug #1669
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Closes#849, #1135
customize.mk used to copy files with a wrong command, resulting in one
directory level in excess. For example, source/etc/myfile would have
produced /etc/etc/myfile in the target filesystem instead of /etc/myfile.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When the selected C library is glibc, the C library shouldn't be
mentionned in REAL_GNU_TARGET_NAME. In other words:
arm-unknown-linux-uclibcgnueabi must be used for uClibc
arm-unknown-linux-gnueabi must be used for glibc
This fixes the build of GDB on the target, as reported by Quotient
Remainder <quotientvremainder@gmail.com>.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
HOST_SED_BINARY is used 2 times during startup, and is relatively
expensive to run, so make it a simple expanded variable (:=) rather
than a recursively expanded one (=).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bash seems to be smart enough to source the file when execve returns
ENOEXEC, but other shells might not be.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
GNU_HOST_NAME is referred more than 100 times in the tree, used 5
times during startup, and is relatively expensive to run - so make
it a simple expanded variable (:=) rather than recursively expanded
one (=).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As noticed by Thomas, we call the UPPERCASE macro a lot, and it slows down
startup quite a bit.
Optimize it by implementing it in make, rather than forking a shell + tr.
The implementation is heavily based on the 'up' macro from gmsl
(http://gmsl.sf.net)
With this in place, startup time is ~5 times lower.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of assuming that mkfontdir and mkfontscale are available on
the development system, use the one installed in $(HOST_DIR).
The FCCACHE variable is removed, because, for some reason, the
installation process of xfonts disables the call to fc-cache when a
DESTDIR is passed. See the definition of XORG_FONT_FCCACHE in
aclocal.m4 in font packages:
AC_DEFUN([XORG_FONT_FCCACHE],[
AC_PATH_PROG(FCCACHE, fc-cache)
FCCACHE_WARN='echo "** Warning: fonts.cache not built" ; echo "** Generate this file manually on host system using fc-cache"'
if test x"$FCCACHE" = x ; then
RUN_FCCACHE="${FCCACHE_WARN}"
else
RUN_FCCACHE='@(if test -z "$(DESTDIR)"; then echo $(FCCACHE) $(fontdir); $(FCCACHE) $(fontdir); else'
RUN_FCCACHE="${RUN_FCCACHE} ${FCCACHE_WARN} ; fi)"
fi
AC_SUBST([RUN_FCCACHE])
])
In addition to this, we update the font dependencies to include
font-utils for the host, mkfontdir for the host, mkfontscale for the
host and bdftopcf for the host.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that xapp_bdftopcf is enabled on the host, we also need its
dependencies to be available for the host. The dependency of
host-xapp_bdftopcf is host-xlib_libXfont, which itself depends on a
bunch of other packages. Some of them were already available for the
host, some not (xfont_encodings, xlib_xtrans, xproto_fontcacheproto,
xproto_fontsproto) and are therefore added by this patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Compiling xfonts require having bdftopcf installed on the
host. Therefore, enable host support for this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When compiling xfonts, host utilities like bdftopcf or ucs2any, part
of xfont_font-util are needed. Until now, xfont_font-util was
installing ugly symbolic links, assuming that these tools were
available on the development machine.
This patch enables the host package for xfont_font-util, removes the
post-install.sh script, and keeps only the useful part of this script
in a post install hook.
host-xfont_font-util will be used later by xfont packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to solve issues of libtool trying to link target components
against host libraries, it seems that specifying -L$(STAGING_DIR)/lib
and -L$(STAGING_DIR)/usr/lib works.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In c1b6242fdc, we added
$(HOST_DIR)/usr/lib to LD_LIBRARY_PATH when building target packages,
because the build of target packages sometimes require host tools
installed in $(HOST_DIR)/usr/bin which themselves require host
libaries installed in $(HOST_DIR)/usr/lib.
Unfortunately, this solution didn't work, as libtool then tried to
link target binaries against host libraries. So $(HOST_DIR)/usr/lib
got removed from LD_LIBRARY_PATH in
0d1830b07d.
However, this meant that we went back to the previous situation, in
which host tools used during compilation of target components might
require host libraries. An example :
make[2]: Entering directory `/home/test/buildroot/output.ctng-arm-eglibc-2010-05-04-12-41-00/build/xfont_font-adobe-100dpi-1.0.1'
/home/test/buildroot/output.ctng-arm-eglibc-2010-05-04-12-41-00/host/usr/bin/mkfontdir /home/test/buildroot/output.ctng-arm-eglibc-2010-05-04-12-41-00/target/usr/share/fonts/X11/100dpi
/home/test/buildroot/output.ctng-arm-eglibc-2010-05-04-12-41-00/host/usr/bin/mkfontscale: error while loading shared libraries: libfontenc.so.1: cannot open shared object file: No such file or directory
Therefore, we try another solution: make sure that host binaries are
linked with an -rpath option, so that $(HOST_DIR)/usr/lib doesn't need
to be in LD_LIBRARY_PATH for them to find their libraries.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On my target rootfs it is installed documentation for:
atk, cairo, gdk, gdk-pixbuf, gio, glib, gobject, gtk, pango
It ocupies 34M of space. Configure option --disable-gtk-doc doesn't
prevent installation of it. So we should remove them manually if
documentation is disabled.
[Peter: also remove manual rm's from hal/libxml2/libglade]
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#1525
Kconfig selects are not recursive, so ensure we select the dependencies
of our dependencies as well.
Cleanup target installation:
- Remove tasks handled by the generic post-build cleanup
- Hal doesn't install etc/rc.d, so don't try to delete it
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix a few typos/mistakes introduced in commit ea448fe:
- bzip2 soname is not the same as package version
- It is PKG_INSTALL_STAGING, not PKG_STAGING_INSTALL
- Typo: BZIP2_INSTALL_TARGET_CMDS, not B2IP_INSTALL_TARGET_CMDS
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some packages like icu requires to be compiled against the host system
first to be able to compile against the target. This is due to the
usage of self generated binaries by the package to build itself. When
the generated tools also depends on generated libraries it is required
to add the path to these libraries in the library path
(LD_LIBRARY_PATH) especially for the configure step.
Adding $(HOST_DIR)/usr/lib to LD_LIBRARY_PATH for target compilation
might break the link step by mixing host libraries and target
binaries.
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If devtmpfs (the kernel-maintained /dev filesystem) is used, no
/dev/pts directory is created, causing the devpts mount to fail, which
in term causes stuff like dropbear to fail.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
These are ancient (2006) and upstream strongly discourage using them:
ftp://sourceware.org/pub/gdb/old-releases/README
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It got broken by the introduction of the new autotools infrastructure
based on the generic infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of asking the user about the GNU target suffix, just compute
it automatically from the other configuration options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In both internal and external toolchain cases, KERNEL_CROSS was
defined to *exactly* the same value as TARGET_CROSS. It isn't modified
anywhere, and is just used by kernel compilation and pcmcia
compilation.
Therefore, get rid of KERNEL_CROSS and use TARGET_CROSS instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The definition of TOOLCHAIN_DIR is the same regardless of whether
external or internal toolchains are used. Moreover, move its
definition together with all the other *_DIR definitions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since new configuration options have been added in 0.9.31, the value
of these configuration options should be determined, either by the
default configuration file we provide, or by uclibc.mk process.
The locale generation process should probably be improved in order to
allow building other locales than just en_US.
[Peter: fixup locale handling, add PROGRAM__NAME to defconfig]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
UCLIBC_HAS_NFTW is a new knob in 0.9.31, which allows the obsolete and
deprecated ftw() to be compiled-out separatly from nftw(), which is
part of POSIX. nftw() should probably be enabled by default in uClibc,
and a bug has been opened about this on uClibc bug tracker
(https://bugs.busybox.net/show_bug.cgi?id=1597).
nftw() is, for example, used in Gtk+.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When FOO_LIBTOOL_PATCH is defined, assume that the same value should
be used for HOST_FOO_LIBTOOL_PATCH.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
OpenSSL is not using the autotools as its build system. Therefore, we
must use the generic infrastructure instead of the autotools one.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Do not build against libgcrypt on the host, since we don't build
libgcrypt ourself, and it might fail even when libgcrypt is installed
on the host:
...configure...
checking for libgcrypt-config... /usr/bin/libgcrypt-config
Crypto extensions will be available.
...build...
gcc: /usr/lib/libgcrypt.so: No such file or directory
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The autoreconf check was incorrect, missing a $ sign to properly
reference a package-specific variable. There was no visible effect
until now since :
* The existing syntax allowed to access the value defined in the
package specific .mk file, so when AUTORECONF was set to YES by a
package, it was working.
* The default value in Makefile.autotools.in was NO. In fact, when a
package .mkf file wasn't defining the AUTORECONF variable, the
Makefile.autotools.in test was testing the empty string against
'YES', which was false, leading to the AUTORECONF not being done,
which was the desired effect.
However, in a later patch, we intend to change this default value.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
install -D needs the destination filename, not just it's directory,
otherwise we end up with a pkgconfig file instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
autoheader is used by autoreconf, therefor we need to give the right
path to this tools for host/target autoreconfiguration.
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When compiling GDB for target (in my case i386) it links
wrong BFD library from host OS. This prevents GDB from compiling
support for ELF and thus GDB is unusable on target.
More about this issue was already posted at:
http://lists.uclibc.org/pipermail/buildroot/2009-March/026585.html
Fix this issue by forcing ELF support.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
These packages have buggy configure script. It adds -L/lib flag
for linker and thus wrong libraries are linked in.
Workaround this issue by setting expat=yes in configure
environment.
Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes error: "open with O_CREAT in second argument needs 3 arguments".
Original patch: svn://svn.berlios.de/tslib/trunk/tslib r72.
[Peter: pull original patch for proper attribution]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When initramfs was ported to the new fs structure the init symlink
macro was defined, but forgot to add it to PRE_GEN_HOOKS
Signed-off-by: Will Wagner <will_wagner@carallon.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The restructure for building root filesystems changed the target name
for the initramfs file, to build the file the trget is now
initramfs-root but the generated file is rootfs.initramfs
Signed-off-by: Will Wagner <will_wagner@carallon.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 9277cb760a added support
for mtdinfo to mtd.mk but missed corresponding Config.in stuff.
Signed-off-by: Michael Roth <mroth@nessie.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With the ROOTFS_TARGET conversion, EXT2_OPTS gets evaluated very early
(before TARGET_DIR is populated with files), so the calculated
blocks/inodes numbers are wrong.
Fix it by moving the calculation to a shell script wrapper around
genext2fs, so it only gets executed just before genext2fs runs.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
BR2_TARGET_ROOTFS_EXT2_RESBLKS is an int, so test against 0 rather than
the empty string - Otherwise the test is always true and a -m option
without arguments is added to the argument list, causing genext2fs to
get confused.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We only bother updating the defconfigs that need a non-default
BR2_ROOTFS_DEVICE_TABLE value.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We have a special case for Xtensa, which was patching the generic
device_table.txt. Instead of doing this, we just keep a copy of the
device table, specific to Xtensa, with Xtensa specifities. The fact
that the patch wasn't applying anymore on the generic device table is
a sign that the existing approach wasn't working anyway.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now, the location of the device table was specified by a
variable in board Makefiles. Unfortunately, this variable is not
accessible from fs/common.mk, since the target/ code is included
*after* fs/common.mk.
Anyway, the general idea is to move away from these boards Makefile,
and provide configuration option for things like the device table
location.
Therefore, this patch adds a BR2_ROOTFS_DEVICE_TABLE option which
allows to specify which device table should be used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The installation procedure of cramfs was broken when
$(HOST_DIR)/usr/bin didn't exist (i.e, cramfsck was installed as
$(HOST_DIR)/usr/bin directly). Use install -D with a proper
destination argument to make it work.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When compiling Busybox, according to readelf -A, all object files were
properly compiled according to the select architecture (-march=armv4t
for example), but the final busybox binary could be of a different
architecture (ARMv5t even if ARMv4t was selected).
This patch changes the way we configure/compile Busybox so that our
CFLAGS aren't anymore passed through the make EXTRA_CFLAGS variable,
but through the .config CONFIG_EXTRA_CFLAGS variable. Unfortunately,
those variables don't have exactly the same semantic for the Busybox
build system.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Multilib toolchains provide different versions of the base libraries
for different architecture variants. For example, the ARM Codesourcery
toolchain provides base libraries for ARMv5 (default), ARMv4t and
Thumb2.
Depending on the -march= argument passed to gcc, the sysroot used by
the compiler is therefore different. This means that the sysroot
location in CROSS-gcc -v cannot be used. Instead, we must use
CROSS-gcc -print-sysroot when available and fall back to the old way
if unavailable.
Moreover, we cannot simply copy the full sysroot as we used to do,
because the sysroot organization of multilib toolchain is more
complicated. In Codesourcery toolchains, we have :
/
etc -- for ARMv5
lib -- for ARMv5
sbin -- for ARMv5
usr -- for ARMv5 (includes headers)
armv4t
etc -- for ARMv4t
lib -- for ARMv4t
sbin -- for ARMv4t
usr -- for ARMv4t (no headers!)
thumb2
etc -- for Thumb2
lib -- for Thumb2
sbin -- for Thumb2
usr -- for Thumb2 (no headers!)
So we have the default ARMv5 architecture variant that is installed in
the main directory, and we have subdirectories for the ARMv4t and
Thumb2 architecture variants.
Copying the full sysroot to the staging directory doesn't work. All
our packages are based on the fact that they should install libraries
in staging/usr/lib. But if ARMv4t is used, the compiler would only
look in staging/armv4t/usr/lib for libraries (even when overriding the
sysroot with the --sysroot option, the multilib compiler suffixes the
sysroot directory with the architecture variant if it matches a
recognized one).
Therefore, we have to copy only the sysroot that we are interested
in. This is rendered a little bit complicated by the fact that the
armv4t and thumb2 sysroot do not contain the headers since they are
shared with the armv5 sysroot.
So, this patch :
* Modifies how we compute SYSROOT_DIR in order to use -print-sysroot
if it exists. SYSROOT_DIR contains the location of the main sysroot
directory, i.e the sysroot for the default architecture variant.
* Defines ARCH_SUBDIR as the subdirectory in the main sysroot for the
currently selected architecture variant (in our case, it can be
".", "armv4t" or "thumb2"). ARCH_SYSROOT_DIR is defined as the full
path to the sysroot of the currently selected architecture variant.
* Modifies copy_toolchain_lib_root (which copies a library to the
target/ directory) so that libraries are taken from
ARCH_SYSROOT_DIR instead of SYSROOT_DIR. This ensures that
libraries for the correct architecture variant are properly copied
to the target.
* Modifies copy_toolchain_sysroot (which copies the sysroot to the
staging/ directory), so that it copies the contents of
ARCH_SYSROOT_DIR, and if needed, adds the headers from the main
sysroot directory and a symbolic link (armv4t -> . or thumb2 -> .)
to make the compiler believe that its sysroot is really in armv4t/
or thumb2/.
Tested with Codesourcery 2009q1 ARM toolchain, Crosstool-NG ARM glibc
and ARM uClibc toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The copy_toolchain_lib_root function was making the assumption that
all libraries were stored inside the /lib directory of the sysroot
directory. However, this isn't true for certain toolchains,
particularly for the libstdc++ library.
The function is therefore reworked to find the library and its related
symlink either in /lib or /usr/lib in the sysroot, and copies it at
the same location in the target directory.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now, many TARGET_CFLAGS where missing when using an external
toolchain, due to how package/Makefile.in was written. Now, a lot more
definitions are common between the Buildroot toolchain case and the
external toolchain case.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also cleanup autotools symbols and add libatomic_ops dependency
for Intel part.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
These options are part of the default set of options passed to
./configure by the AUTOTARGETS infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the introduction of the AUTOTARGETS infrastructure, the dummy
example is no longer correct. Moreover, the documentation now contains
extensive details about how new packages should be added, either using
the GENTARGETS or the AUTOTARGETS infrastructures.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bumping the version from 2.5.9 to 2.6 allows to avoid adding a patch
(merged upstream) to fix patch's Makefile install target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since BR2_RECENT was enabled by default, we do not want entries marked
BR2_RECENT (and thus appearing by default in Buildroot) to disappear.
Therefore, all the entries marked BR2_RECENT are converted as
non-deprecated. We can later decide, on a per-entry basis, to add
BR2_DEPRECATED to some of them. But at least, this commit doesn't
change the default current behaviour of Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This variable, together with the FIXME comment, has been added has
part of Eric Andersen's « Major buildroot facelift, step one » commit
that occured in October 2004.
Since then, no real usage has been made of OPTIMIZE_FOR_CPU, and the
initial intention has probably been lost in the memories of the
implementors.
Therefore, get rid of the variable, and just use $(ARCH) at the two
locations the variable was used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It seems that there was an intention to add BR2_ENABLE_OPENMP someday,
but it was in June 2007 (commit
c81807a9d7) and since then, nothing
occured. Therefore, get rid of this code, and just pass
--disable-openmp to gettext to keep the current behaviour.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The option is marked broken since october 2009, and even the uClibc
configuration help text says that using pregenerated locales is highly
discouraged.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of having a configuration option BR2_GNU_BUILD_SUFFIX, let's
use config.guess to guess the build system type.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the documentation cleanup is done by the main Makefile in a
global way, there's no need to do that on a per-package basis in the
generic package infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now, we had BR2_HAVE_MANPAGES, BR2_HAVE_INFOPAGES and
BR2_HAVE_DOCUMENTATION, but there's no need to have such a
fine-grained control over what documentation gets kept or not.
Therefore, just remove all the documentation (man pages, info pages
and documentation in $(TARGET_DIR)/usr/doc and
$(TARGET_DIR)/usr/share/doc) when BR2_HAVE_DOCUMENTATION is not set.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cleanup of $(TARGET_DIR)/usr/share/man, $(TARGET_DIR)/usr/man,
$(TARGET_DIR)/usr/share/info, $(TARGET_DIR)/usr/info,
$(TARGET_DIR)/usr/share/doc and $(TARGET_DIR)/usr/doc is already done
globally in the main Makefile. Therefore, there's no need to handle
that on a per-package basis.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the BR2_UPDATE_CONFIG option which allowed to globally
enable/disable the replacement of config.{guess,sub} for
autotools-based packages. Doing it unconditionnally just works.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This option is barely used, no-one is maintaining it or extending
it. So let's remove it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for the old squashfs 3.x tools, so that squashfs 3.x root
filesystems can be generated.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dependency on gzip, bzip2 and lzma are properly handled
automatically. No need to tell the user about this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now, we just hardcode the image filenames to be rootfs.$(FSTYPE), in
the $(BINARIES_DIR).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Unfortunately, it cannot use the ROOTFS_TARGET infrastructure, due to
the specifities of the iso9660 build process.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We also remove the BR2_TARGET_ROOTFS_UBIFS_OUTPUT option, that could
be used to specify an alternate name for the generated image file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We also remove the BR2_TARGET_ROOTFS_JFFS2_OUTPUT option, that could
be used to specify an alternate name for the generated image file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We also remove the BR2_TARGET_ROOTFS_EXT2_OUTPUT option, that could be
used to specify an alternate name for the generated image file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to avoid code duplication between the different filesystem
generation makefile, we introduce a ROOTFS_TARGET macro. Documentation
for this macro is contained in the patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There's no need to provide options to copy the filesystem image after
the build. Just use 'cp' outside of Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use package/mtd to build the host mtd-utils, which contains
mkfs.ubifs. Remove dependency on BR2_HOST_FAKEROOT.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the code to build squashfs-tools for the host, since they can
now be built using package/squashfs.
We also remove support for Squashfs 3.x, because the Squashfs driver
merged inside the mainline kernel is a 4.x driver. So 3.x is only
useful for old kernels using a Squashfs patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the code needed to build host genromfs, since it can now be
done using package/genromfs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the code to build host MTD utils, since they can now be built
using package/mtd.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the genext2fs host tools building process, which is now in
package/genext2fs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* Remove the dependency on BR2_HOST_FAKEROOT, since we don't have
config option for host tools.
* Remove a few useless things.
* Check that cpio is available on the host in
toolchain/dependencies/dependencies.sh.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the code to build the cloop utilities for the host (it is now
in package/cloop).
Use fakeroot instead of ugly sudo. The cloop filesystem generation
code is now much more similar to other filesystems code.
Remove empty Makefile.in.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Note that we loose the ability to use a lzma command available on the
host and we now always build your own if a package needs it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Only the host variant is supported, which explains why there is no
Config.in file. Will be used by the filesystem generation code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Host package is needed to get libuuid installed for the host, needed
to build the mtd utils for the host.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Supported both for the target and the host. Will be used by the root
filesystem generation code, thanks to genisoimage.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Only compilation for the host is supported, why explains why we don't
have a Config.in and the corresponding BR2_PACKAGE_CMAKE option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed as a dependency of cdrkit, which contains genisomage, useful
for generating ISO9660 filesystem images.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Note this version requires a recent kernel with KMS support as it is
currently configured
Signed-off-by: Will Wagner <will_wagner@carallon.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Libtool patch applies just fine.
mbdesktop_modules is installed by the matchbox-desktop and we
don't have to overwrite it with our copy(contains wrong paths).
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The toolchains built with buildroot use specially crafted paths for their
sysroot and prefix. Fix that by asking gcc where it finds a file we
know by relative path to the sysroot.
This has the side effect of greatly simplifying the sysroot detection
in every cases tested so far (BR toolchains, CT-NG toolchains, and
CodeSourcery toolchains).
Fixes bug #851.
Thanks Thomas Petazzoni for the hint and some testings.
Thanks Grant Edwards for the report and the comments.
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
usb_modeswitch build system is just a simple Makefile, so the
GENTARGETS infrastructure is more appropriate than the AUTOTARGETS
infrastructure. The build system is slightly fixed through a small
patch, that replaces the previous "nostrip" patch.
The latest version of usb_modeswitch is 1.1.1, but it now relies on
udev and requires TCL to operate. Someone actually using
usb_modeswitch would probably be at a better place to do this version
bump.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upgrade libusb to v1.0.3 and add new libusb-compat package for
compatibility with old packages that expect the pre-1.0 API.
Also update usb_modeswitch to depend on libusb-compat rather than
libusb.
Minor fixes by Thomas Petazzoni <thomas.petazzoni@free-electrons.com>.
Fixes bug #1093.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Enable susv3/susv4 legacy support for now, as a lot of packages (E.G.
busybox) breaks with the stricter interpretation in 0.9.31.
Also slightly tweak uclibc.mk as the "new" linuxthreads symbol changed.
Test built on x86/x86-64/ppc/arm/mips.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Strangely enough O is still passed to submakes with MAKEOVERRIDES
(with make 3.81 atleast), the only thing that changes is the output
of the origin function (command line -> environment).
Unfortunately some packages don't look at origin (E.G. uClibc 0.9.31+)
To really make O go away, we have to override it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that the kernel-headers are bumped, also bump the linux
targets to match.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
qt 4.6.x has a number of new configure options, and needs a patch to
work on uClibc.
Signed-off-by: Frederik Vannoote <frederik.vannoote@barco.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It is not included in generic skeleton and very unlikely
that someone will use it on embedded devices.
AFAIK even Fedora does not include it in fstab.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#1387
The documentation step needs working groff and ps2pdf on the host, and
only slows down the build, so just disable it.
At the same time, cleanup the overlong _CONF_OPT line.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With multicores everywhere, 2 is probably a bit low - But atleast it's
better than the current default.
This extra parallelism also ensures we get to test the make dependencies
a bit more.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Lay down the path to add more than two toolchain kinds:
- check the type of toolchain as:
ifeq (toolchain_buildroot,y)
blabla buildroot-specific
else ifeq (toolchain_external,y)
blabla external-specific
endif
- prefer using positive checks, a-la:
ifeq (foo,y)
instead of:
ifneq (bar,y)
(where foo and bar are mutually exclusive)
- have the toolchain_buildroot case always appear first
- gettext is handled differently, because we want to add an option
only if not using the buildroot toolchain, hence we use ifneq.
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Acked-By: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#1447
When installing without symbols install-strip is used,
with symbols - install-exec.
Since install-exec installs only executables, we should use
simple install, to install other needed files also
(like files in /usr/shared) as install-strip does.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Acked-by: Lionel Landwerlin <llandwerlin@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Has been marked as broken for more than 1 year, with no indication
that anyone cares, and it needs a bunch of special handling.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also autotools.in conversion and change source location from
gd.tuwien.ac.at to ftp.gnupg.org
[Peter: add missing libgpg-error makefile dependency]
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#805
This patch updates mdadm to 2.6.9 and uses the new makefile template.
Signed-off-by: Richard van Paasen <rvpaasen@t3i.nl>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Makefile.autotools.in automatically adds these to the configure invocation,
so there's no need to explicitly list them.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
linux/hayesesp.h got removed in 2.6.33, but some archs (like x86) still
define the TIOCGHAYESESP ioctl, breaking the build.
It's very unlikely to be of interest anymore, so just undef it.
Reported-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As the 0.9.30.x stable releases only contain bugfixes, there isn't much
sense in using the older 0.9.30.x releases instead of .3, so use a single
0.9.30.x config similar to how we do it for the kernel headers.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The -mm tree is really no longer available since the -next tree
was created for testing. It's not even listed on the kernel.org
site any longer. Plus, the last one that was published as
available was pretty old, 2.6.28-rc2-mm1.
Remove all the -mm patch stuff from Buildroot to clean up the
Linux kernel selection.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reported by H Hartley Sweeten.
Make sure we pass proper CFLAGS to mtd-utils, so builds needing --sysroot
works (E.G. external toolchains).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reported by "Thomas".
Strip fails as it gets called without any arguments. Instead of working
around this, simply remove the package-specific stripping as it is
done later (in target-finalize) anyway.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit be8a104c3c (pass CFLAGS/LDFLAGS and add host-zlib dependency)
changed the way make was invocated for squashfs and added a patch for 4.0,
but forgot to add an equivalent patch for 3.4.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also mark this driver as broken. It fails to compile since it
needs some headers from OpenBSD/NetBSD. We actually don't care
about this driver.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Also fix building as the patch was correct, but autoreconf
had to be done for it to take effect.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
