Update for 2013.02

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

CHANGES

@@ -1,3 +1,23 @@
+2013.02, Released February 28th, 2013:
+
+	Misc manual updates.
+
+	Updated/fixed packages: busybox, collectd, flashbench,
+	libgtk2, libupnp, mii-diag, quota
+
+2013.02-rc3, Released February 26th, 2013
+
+	Minor fixes.
+
+	Updated/fixed packages: conntrack-tools, dialog,
+	enlightenment, haserl, keyutils, libfif, libmad,
+	linux-firmware, linux-fusion, matchbox-desktop, matchbox-wm,
+	ruby, spawn-fcgi, vtun
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#5960: fusion.ko driver does not install to target rootfs
+
 2013.02-rc2, Released February 19th, 2013
 
 	Fixes all over the tree.

Makefile

@@ -24,7 +24,7 @@
 #--------------------------------------------------------------
 
 # Set and export the version string
-export BR2_VERSION:=2013.02-rc2
+export BR2_VERSION:=2013.02
 
 # Check for minimal make version (note: this check will break at make 10.x)
 MIN_MAKE_VERSION=3.81

docs/download.html

@@ -6,22 +6,22 @@
 
 <p>
 
-The latest stable release is <b>2012.11.1</b>, which can be downloaded
+The latest stable release is <b>2013.02</b>, which can be downloaded
 here:<p>
 
-<a href="/downloads/buildroot-2012.11.1.tar.gz">buildroot-2012.11.1.tar.gz</a>
+<a href="/downloads/buildroot-2013.02.tar.gz">buildroot-2013.02.tar.gz</a>
 or
-<a href="/downloads/buildroot-2012.11.1.tar.bz2">buildroot-2012.11.1.tar.bz2</a>.
-
+<a href="/downloads/buildroot-2013.02.tar.bz2">buildroot-2013.02.tar.bz2</a>.
+<!--
 <p>
-The latest release candidate is <b>2013.02-rc2</b>, which can be
+The latest release candidate is <b>2013.02-rc3</b>, which can be
 downloaded here:<p>
 
-<a href="/downloads/buildroot-2013.02-rc2.tar.gz">buildroot-2013.02-rc2.tar.gz</a>
+<a href="/downloads/buildroot-2013.02-rc3.tar.gz">buildroot-2013.02-rc3.tar.gz</a>
 or
-<a href="/downloads/buildroot-2013.02-rc2.tar.bz2">buildroot-2013.02-rc2.tar.bz2</a>.
+<a href="/downloads/buildroot-2013.02-rc3.tar.bz2">buildroot-2013.02-rc3.tar.bz2</a>.
 <p>
-
+-->
 This and earlier releases can always be downloaded from
 <a href="/downloads/">http://buildroot.net/downloads/</a>.
 

docs/manual/adding-packages-autotools.txt

@@ -18,24 +18,25 @@ package, with an example :
 03: # libfoo
 04: #
 05: #############################################################
-06: LIBFOO_VERSION = 1.0
-07: LIBFOO_SOURCE = libfoo-$(LIBFOO_VERSION).tar.gz
-08: LIBFOO_SITE = http://www.foosoftware.org/download
-09: LIBFOO_INSTALL_STAGING = YES
-10: LIBFOO_INSTALL_TARGET = NO
-11: LIBFOO_CONF_OPT = --disable-shared
-12: LIBFOO_DEPENDENCIES = libglib2 host-pkgconf
-13:
-14: $(eval $(autotools-package))
+06:
+07: LIBFOO_VERSION = 1.0
+08: LIBFOO_SOURCE = libfoo-$(LIBFOO_VERSION).tar.gz
+09: LIBFOO_SITE = http://www.foosoftware.org/download
+10: LIBFOO_INSTALL_STAGING = YES
+11: LIBFOO_INSTALL_TARGET = NO
+12: LIBFOO_CONF_OPT = --disable-shared
+13: LIBFOO_DEPENDENCIES = libglib2 host-pkgconf
+14:
+15: $(eval $(autotools-package))
 ------------------------
 
-On line 6, we declare the version of the package.
+On line 7, we declare the version of the package.
 
-On line 7 and 8, we declare the name of the tarball and the location
+On line 8 and 9, we declare the name of the tarball and the location
 of the tarball on the Web. Buildroot will automatically download the
 tarball from this location.
 
-On line 9, we tell Buildroot to install the package to the staging
+On line 10, we tell Buildroot to install the package to the staging
 directory. The staging directory, located in +output/staging/+
 is the directory where all the packages are installed, including their
 development files, etc. By default, packages are not installed to the
@@ -45,7 +46,7 @@ other libraries or applications depending on them. Also by default, when
 staging installation is enabled, packages are installed in this location
 using the +make install+ command.
 
-On line 10, we tell Buildroot to not install the package to the
+On line 11, we tell Buildroot to not install the package to the
 target directory. This directory contains what will become the root
 filesystem running on the target. For purely static libraries, it is
 not necessary to install them in the target directory because they will
@@ -53,14 +54,14 @@ not be used at runtime. By default, target installation is enabled; setting
 this variable to NO is almost never needed. Also by default, packages are
 installed in this location using the +make install+ command.
 
-On line 11, we tell Buildroot to pass a custom configure option, that
+On line 12, we tell Buildroot to pass a custom configure option, that
 will be passed to the +./configure+ script before configuring
 and building the package.
 
-On line 12, we declare our dependencies, so that they are built
+On line 13, we declare our dependencies, so that they are built
 before the build process of our package starts.
 
-Finally, on line line 14, we invoke the +autotools-package+
+Finally, on line line 15, we invoke the +autotools-package+
 macro that generates all the Makefile rules that actually allows the
 package to be built.
 

docs/manual/adding-packages-cmake.txt

@@ -18,24 +18,25 @@ with an example :
 03: # libfoo
 04: #
 05: #############################################################
-06: LIBFOO_VERSION = 1.0
-07: LIBFOO_SOURCE = libfoo-$(LIBFOO_VERSION).tar.gz
-08: LIBFOO_SITE = http://www.foosoftware.org/download
-09: LIBFOO_INSTALL_STAGING = YES
-10: LIBFOO_INSTALL_TARGET = NO
-11: LIBFOO_CONF_OPT = -DBUILD_DEMOS=ON
-12: LIBFOO_DEPENDENCIES = libglib2 host-pkgconf
-13:
-14: $(eval $(cmake-package))
+06:
+07: LIBFOO_VERSION = 1.0
+08: LIBFOO_SOURCE = libfoo-$(LIBFOO_VERSION).tar.gz
+09: LIBFOO_SITE = http://www.foosoftware.org/download
+10: LIBFOO_INSTALL_STAGING = YES
+11: LIBFOO_INSTALL_TARGET = NO
+12: LIBFOO_CONF_OPT = -DBUILD_DEMOS=ON
+13: LIBFOO_DEPENDENCIES = libglib2 host-pkgconf
+14:
+15: $(eval $(cmake-package))
 ------------------------
 
-On line 6, we declare the version of the package.
+On line 7, we declare the version of the package.
 
-On line 7 and 8, we declare the name of the tarball and the location
+On line 8 and 9, we declare the name of the tarball and the location
 of the tarball on the Web. Buildroot will automatically download the
 tarball from this location.
 
-On line 9, we tell Buildroot to install the package to the staging
+On line 10, we tell Buildroot to install the package to the staging
 directory. The staging directory, located in +output/staging/+
 is the directory where all the packages are installed, including their
 development files, etc. By default, packages are not installed to the
@@ -45,7 +46,7 @@ other libraries or applications depending on them. Also by default, when
 staging installation is enabled, packages are installed in this location
 using the +make install+ command.
 
-On line 10, we tell Buildroot to not install the package to the
+On line 11, we tell Buildroot to not install the package to the
 target directory. This directory contains what will become the root
 filesystem running on the target. For purely static libraries, it is
 not necessary to install them in the target directory because they will
@@ -53,13 +54,13 @@ not be used at runtime. By default, target installation is enabled; setting
 this variable to NO is almost never needed. Also by default, packages are
 installed in this location using the +make install+ command.
 
-On line 11, we tell Buildroot to pass custom options to CMake when it is
+On line 12, we tell Buildroot to pass custom options to CMake when it is
 configuring the package.
 
-On line 12, we declare our dependencies, so that they are built
+On line 13, we declare our dependencies, so that they are built
 before the build process of our package starts.
 
-Finally, on line line 14, we invoke the +cmake-package+
+Finally, on line line 15, we invoke the +cmake-package+
 macro that generates all the Makefile rules that actually allows the
 package to be built.
 

docs/manual/adding-packages-generic.txt

@@ -20,42 +20,43 @@ system is based on hand-written Makefiles or shell scripts.
 03: # libfoo
 04: #
 05: #############################################################
-06: LIBFOO_VERSION = 1.0
-07: LIBFOO_SOURCE = libfoo-$(LIBFOO_VERSION).tar.gz
-08: LIBFOO_SITE = http://www.foosoftware.org/download
-09: LIBFOO_LICENSE = GPLv3+
-10: LIBFOO_LICENSE_FILES = COPYING
-11: LIBFOO_INSTALL_STAGING = YES
-12: LIBFOO_CONFIG_SCRIPTS = libfoo-config
-13: LIBFOO_DEPENDENCIES = host-libaaa libbbb
-14:
-15: define LIBFOO_BUILD_CMDS
-16:	$(MAKE) CC="$(TARGET_CC)" LD="$(TARGET_LD)" -C $(@D) all
-17: endef
-18:
-19: define LIBFOO_INSTALL_STAGING_CMDS
-20:	$(INSTALL) -D -m 0755 $(@D)/libfoo.a $(STAGING_DIR)/usr/lib/libfoo.a
-21:	$(INSTALL) -D -m 0644 $(@D)/foo.h $(STAGING_DIR)/usr/include/foo.h
-22:	$(INSTALL) -D -m 0755 $(@D)/libfoo.so* $(STAGING_DIR)/usr/lib
-23: endef
-24:
-25: define LIBFOO_INSTALL_TARGET_CMDS
-26:	$(INSTALL) -D -m 0755 $(@D)/libfoo.so* $(TARGET_DIR)/usr/lib
-27:	$(INSTALL) -d -m 0755 $(TARGET_DIR)/etc/foo.d
-28: endef
-29:
-30: define LIBFOO_DEVICES
-31:	/dev/foo  c  666  0  0	42  0  -  -  -
-32: endef
-33:
-34: define LIBFOO_PERMISSIONS
-35:	/bin/foo  f  4755  0  0	 -  -  -  -  -
-36: endef
-37:
-38: $(eval $(generic-package))
+06:
+07: LIBFOO_VERSION = 1.0
+08: LIBFOO_SOURCE = libfoo-$(LIBFOO_VERSION).tar.gz
+09: LIBFOO_SITE = http://www.foosoftware.org/download
+10: LIBFOO_LICENSE = GPLv3+
+11: LIBFOO_LICENSE_FILES = COPYING
+12: LIBFOO_INSTALL_STAGING = YES
+13: LIBFOO_CONFIG_SCRIPTS = libfoo-config
+14: LIBFOO_DEPENDENCIES = host-libaaa libbbb
+15:
+16: define LIBFOO_BUILD_CMDS
+17:	$(MAKE) CC="$(TARGET_CC)" LD="$(TARGET_LD)" -C $(@D) all
+18: endef
+19:
+20: define LIBFOO_INSTALL_STAGING_CMDS
+21:	$(INSTALL) -D -m 0755 $(@D)/libfoo.a $(STAGING_DIR)/usr/lib/libfoo.a
+22:	$(INSTALL) -D -m 0644 $(@D)/foo.h $(STAGING_DIR)/usr/include/foo.h
+23:	$(INSTALL) -D -m 0755 $(@D)/libfoo.so* $(STAGING_DIR)/usr/lib
+24: endef
+25:
+26: define LIBFOO_INSTALL_TARGET_CMDS
+27:	$(INSTALL) -D -m 0755 $(@D)/libfoo.so* $(TARGET_DIR)/usr/lib
+28:	$(INSTALL) -d -m 0755 $(TARGET_DIR)/etc/foo.d
+29: endef
+30:
+31: define LIBFOO_DEVICES
+32:	/dev/foo  c  666  0  0	42  0  -  -  -
+33: endef
+34:
+35: define LIBFOO_PERMISSIONS
+36:	/bin/foo  f  4755  0  0	 -  -  -  -  -
+37: endef
+38:
+39: $(eval $(generic-package))
 --------------------------------
 
-The Makefile begins on line 6 to 10 with metadata information: the
+The Makefile begins on line 7 to 11 with metadata information: the
 version of the package (+LIBFOO_VERSION+), the name of the
 tarball containing the package (+LIBFOO_SOURCE+) the
 Internet location at which the tarball can be downloaded from
@@ -65,13 +66,13 @@ the same prefix, +LIBFOO_+ in this case. This prefix is always the
 uppercased version of the package name (see below to understand where
 the package name is defined).
 
-On line 11, we specify that this package wants to install something to
+On line 12, we specify that this package wants to install something to
 the staging space. This is often needed for libraries, since they must
 install header files and other development files in the staging space.
 This will ensure that the commands listed in the
 +LIBFOO_INSTALL_STAGING_CMDS+ variable will be executed.
 
-On line 12, we specify that there is some fixing to be done to some
+On line 13, we specify that there is some fixing to be done to some
 of the 'libfoo-config' files that were installed during
 +LIBFOO_INSTALL_STAGING_CMDS+ phase.
 These *-config files are executable shell script files that are
@@ -113,14 +114,14 @@ IMAGEMAGICK_CONFIG_SCRIPTS = \
    Magick-config Magick++-config \
    MagickCore-config MagickWand-config Wand-config
 
-On line 13, we specify the list of dependencies this package relies
+On line 14, we specify the list of dependencies this package relies
 on. These dependencies are listed in terms of lower-case package names,
 which can be packages for the target (without the +host-+
 prefix) or packages for the host (with the +host-+) prefix).
 Buildroot will ensure that all these packages are built and installed
 'before' the current package starts its configuration.
 
-The rest of the Makefile, lines 14..27, defines what should be done
+The rest of the Makefile, lines 16..29, defines what should be done
 at the different steps of the package configuration, compilation and
 installation.
 +LIBFOO_BUILD_CMDS+ tells what steps should be performed to
@@ -133,13 +134,13 @@ All these steps rely on the +$(@D)+ variable, which
 contains the directory where the source code of the package has been
 extracted.
 
-On line 29..31, we define a device-node file used by this package
+On line 31..33, we define a device-node file used by this package
 (+LIBFOO_DEVICES+).
 
-On line 33..35, we define the permissions to set to specific files
+On line 35..37, we define the permissions to set to specific files
 installed by this package (+LIBFOO_PERMISSIONS+).
 
-Finally, on line 37, we call the +generic-package+ function, which
+Finally, on line 39, we call the +generic-package+ function, which
 generates, according to the variables defined previously, all the
 Makefile code necessary to make your package working.
 

docs/manual/configure.txt

@@ -64,6 +64,7 @@ Type+ option in the +Toolchain+ menu. Once one solution has been
 chosen, a number of configuration options appear, they are detailed in
 the following sections.
 
+[[internal-toolchain-backend]]
 Internal toolchain backend
 ^^^^^^^^^^^^^^^^^^^^^^^^^^
 
@@ -138,6 +139,7 @@ Drawbacks of this backend:
   using the _External toolchain backend_.
 * Limited to the _uClibc_ C library.
 
+[[external-toolchain-backend]]
 External toolchain backend
 ^^^^^^^^^^^^^^^^^^^^^^^^^^
 
@@ -240,6 +242,7 @@ Drawbacks of this backend:
   fix from the toolchain vendor, unless you build your external
   toolchain by yourself using Crosstool-NG.
 
+[[crosstool-ng-toolchain-backend]]
 Crosstool-NG toolchain backend
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 

docs/manual/customize-rootfs.txt

@@ -25,18 +25,18 @@ there are a few ways to customize the resulting target filesystem.
   directories, +.empty+ files and files ending with +~+ are excluded.
   _Among these first 3 methods, this one should be preferred_.
 
-* In the Buildroot configuration, you can specify the path to a
-  *post-build script*, that gets called 'after' Buildroot builds all the
-  selected software, but 'before' the rootfs packages are
-  assembled. The +BR2_ROOTFS_POST_BUILD_SCRIPT+ will allow you to
-  specify the location of your post-build script. This option can be
+* In the Buildroot configuration, you can specify the paths to one or
+  more *post-build scripts*. These scripts are called in the given order,
+  'after' Buildroot builds all the selected software, but 'before' the
+  rootfs images are assembled. The +BR2_ROOTFS_POST_BUILD_SCRIPT+ allows
+  you to specify the location of your post-build scripts. This option can be
   found in the +System configuration+ menu. The destination root
-  filesystem folder is given as the first argument to this script,
-  and this script can then be used to remove or modify any file in your
+  filesystem folder is given as the first argument to these scripts,
+  and these scripts can then be used to remove or modify any file in your
   target filesystem. You should, however, use this feature with care.
   Whenever you find that a certain package generates wrong or unneeded
-  files, you should fix that package rather than work around it with a
-  post-build cleanup script.
+  files, you should fix that package rather than work around it with some
+  post-build cleanup scripts.
   You may also use these variables in your post-build script:
     - +BUILDROOT_CONFIG+: the path to the Buildroot .config file
     - +HOST_DIR+, +STAGING_DIR+, +TARGET_DIR+: see
@@ -55,23 +55,25 @@ there are a few ways to customize the resulting target filesystem.
   installation. Note that this method is *not recommended*, as it
   duplicates the entire skeleton, which prevents from taking advantage
   of the fixes or improvements brought to the default Buildroot
-  skeleton. The recommended method is to use the _post-build script_
+  skeleton. The recommended method is to use the _post-build scripts_
   mechanism described in the previous item.
 
-Note also that if you want to perform some specific actions *after*
-all filesystem images have been created (for example to automatically
+Note also that you can use the *post-image scripts*
+if you want to perform some specific actions 'after' all
+filesystem images have been created (for example to automatically
 extract your root filesystem tarball in a location exported by your
 NFS server, or to create a special firmware image that bundles your
 root filesystem and kernel image, or any other custom action), you can
 specify a space-separated list of scripts in the
-+BR2_ROOTFS_POST_IMAGE_SCRIPT+ configuration option.
++BR2_ROOTFS_POST_IMAGE_SCRIPT+ configuration option. This option can be
+found in the +System configuration+ menu as well.
 
 Each of those scripts will be called with the path to the +images+
 output directory as first and unique argument, and will be executed
 with the main Buildroot source directory as the current
 directory. Those scripts will be executed as the user that executes
 Buildroot, which should normally not be the root user. Therefore, any
-action requiring root permissions in one of these post-image script
+action requiring root permissions in one of these _post-image scripts_
 will require special handling (usage of fakeroot or sudo), which is
 left to the script developer.
 

docs/manual/customize-store.txt

@@ -13,10 +13,13 @@ consists of the buildroot configuration, the configuration files for
 packages that you use (kernel, busybox, uClibc, ...), and your rootfs
 modifications.
 
+
+[[customize-store-basics]]
 Basics for storing the configuration
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-[[customize-store-basics]]
 
+
+[[customize-store-buildroot-config]]
 Buildroot configuration
 ^^^^^^^^^^^^^^^^^^^^^^^
 
@@ -35,6 +38,7 @@ Alternatively, you can copy the file to any other place and rebuild with
 +make defconfig BR2_DEFCONFIG=<path-to-defconfig-file>+.
 
 
+[[customize-store-package-config]]
 Other package configuration
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
@@ -71,6 +75,7 @@ configuration files easier.
   resp. +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE+.
 
 
+[[customize-store-board-support]]
 Creating your own board support
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 

docs/manual/customize-toolchain.txt

@@ -15,7 +15,7 @@ There is no way of tuning an external toolchain since Buildroot does not
 generate it.
 
 It also requires to set the Buildroot settings according to the toolchain ones
-(see xref:external-toolchain[]).
+(see xref:external-toolchain-backend[]).
 
 Using the internal Buildroot toolchain backend
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

docs/manual/patch-policy.txt

@@ -34,12 +34,18 @@ Most patches are provided within Buildroot, in the package
 directory; these typically aim to fix cross-compilation, libc support,
 or other such issues.
 
-These patch files should be named +<packagename>-<description>.patch+.
+These patch files should be named +<packagename>-<number>-<description>.patch+.
 
 A +series+ file, as used by +quilt+, may also be added in the
 package directory. In that case, the +series+ file defines the patch
 application order.
 
+.Notes
+- The patch files coming with Buildroot should not contain any package version
+reference in their filename.
+- The field +<number>+ in the patch file name refers to the 'apply order'.
+
+
 How patches are applied
 ~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -56,8 +62,12 @@ How patches are applied
 * If a +series+ file exists in the package directory, then patches are
   applied according to the +series+ file;
 +
-* Otherwise, patch files matching `<packagename>-*.patch` are applied
-  following the +ls+ command order.
+* Otherwise, patch files matching +<packagename>-*.patch+
+  are applied in alphabetical order.
+  So, to ensure they are applied in the right order, it is hightly
+  recommended to named the patch files like this:
+  +<packagename>-<number>-<description>.patch+, where +<number>+
+  refers to the 'apply order'.
 
 . Run the +<packagename>_POST_PATCH_HOOKS+ commands if defined.
 

docs/manual/working-with.txt

@@ -25,4 +25,5 @@ interested in hacking it to add:
 
 * new packages: refer to the xref:adding-packages[Developer guide]
 
-* new board support: refer to the xref:board-support[Developer guide]
+* new board support: refer to the
+  xref:customize-store-board-support[Developer guide].

docs/news.html

@@ -5,6 +5,28 @@
 <p>
 
 <ul>
+  <li><b>28 February 2013 -- 2013.02 released</b>
+
+    <p>The stable 2013.02 release is out - Thanks to everyone
+    contributing and testing the release candidates. See the
+    <a href="http://git.buildroot.net/buildroot/plain/CHANGES?id=2013.02">CHANGES</a>
+    file for more details
+    and go to the <a href="/downloads/">downloads page</a> to pick up the
+    <a href="/downloads/buildroot-2013.02.tar.bz2">2013.02 release</a>.</p>
+
+  <li><b>26 February 2013 -- 2013.02-rc3 released</b>
+
+    <p>Another week, another release candidate with more cleanups and
+    build fixes. See the <a
+    href="http://git.buildroot.net/buildroot/plain/CHANGES?id=2013.02_rc3">CHANGES</a>
+    file for details.</p>
+
+    <p>Head to the <a href="/downloads/">downloads page</a> to pick up the
+    <a href="/downloads/buildroot-2013.02-rc3.tar.bz2">2013.02-rc3
+    release candidate</a>, and report any problems found to the <a
+    href="lists.html">mailing list</a> or <a
+    href="https://bugs.uclibc.org">bug tracker</a>.</p>
+
   <li><b>19 February 2013 -- 2013.02-rc2 released</b>
 
     <p>Another week, another release candidate with more cleanups and

linux/linux.mk

@@ -198,6 +198,13 @@ define LINUX_INSTALL_DTB
 		$(addprefix $(KERNEL_ARCH_PATH)/boot/dts/,$(KERNEL_DTBS))),dts/),$(KERNEL_DTBS)) \
 		$(BINARIES_DIR)/
 endef
+define LINUX_INSTALL_DTB_TARGET
+	# dtbs moved from arch/$ARCH/boot to arch/$ARCH/boot/dts since 3.8-rc1
+	cp $(addprefix \
+		$(KERNEL_ARCH_PATH)/boot/$(if $(wildcard \
+		$(addprefix $(KERNEL_ARCH_PATH)/boot/dts/,$(KERNEL_DTBS))),dts/),$(KERNEL_DTBS)) \
+		$(TARGET_DIR)/boot/
+endef
 endif
 endif
 
@@ -234,6 +241,7 @@ endef
 ifeq ($(BR2_LINUX_KERNEL_INSTALL_TARGET),y)
 define LINUX_INSTALL_KERNEL_IMAGE_TO_TARGET
 	install -m 0644 -D $(LINUX_IMAGE_PATH) $(TARGET_DIR)/boot/$(LINUX_IMAGE_NAME)
+	$(LINUX_INSTALL_DTB_TARGET)
 endef
 endif
 

package/busybox/busybox-1.21.0/busybox-1.21.0-platform.patch

@@ -0,0 +1,24 @@
+--- busybox-1.21.0/archival/libarchive/decompress_unxz.c
++++ busybox-1.21.0-platform/archival/libarchive/decompress_unxz.c
+@@ -30,8 +30,8 @@ static uint32_t xz_crc32(const uint8_t *
+ /* We use arch-optimized unaligned accessors */
+ #define get_unaligned_le32(buf) ({ uint32_t v; move_from_unaligned32(v, buf); SWAP_LE32(v); })
+ #define get_unaligned_be32(buf) ({ uint32_t v; move_from_unaligned32(v, buf); SWAP_BE32(v); })
+-#define put_unaligned_le32(val, buf) move_to_unaligned16(buf, SWAP_LE32(val))
+-#define put_unaligned_be32(val, buf) move_to_unaligned16(buf, SWAP_BE32(val))
++#define put_unaligned_le32(val, buf) move_to_unaligned32(buf, SWAP_LE32(val))
++#define put_unaligned_be32(val, buf) move_to_unaligned32(buf, SWAP_BE32(val))
+ 
+ #include "unxz/xz_dec_bcj.c"
+ #include "unxz/xz_dec_lzma2.c"
+--- busybox-1.21.0/include/platform.h
++++ busybox-1.21.0-platform/include/platform.h
+@@ -228,7 +228,7 @@ typedef uint32_t bb__aliased_uint32_t FI
+ # define move_from_unaligned32(v, u32p) (memcpy(&(v), (u32p), 4))
+ # define move_to_unaligned16(u16p, v) do { \
+ 	uint16_t __t = (v); \
+-	memcpy((u16p), &__t, 4); \
++	memcpy((u16p), &__t, 2); \
+ } while (0)
+ # define move_to_unaligned32(u32p, v) do { \
+ 	uint32_t __t = (v); \

package/busybox/busybox-1.21.0/busybox-1.21.0-xz.patch

@@ -0,0 +1,84 @@
+--- busybox-1.21.0/archival/libarchive/decompress_unxz.c
++++ busybox-1.21.0-xz/archival/libarchive/decompress_unxz.c
+@@ -40,6 +40,7 @@ static uint32_t xz_crc32(const uint8_t *
+ IF_DESKTOP(long long) int FAST_FUNC
+ unpack_xz_stream(transformer_aux_data_t *aux, int src_fd, int dst_fd)
+ {
++	enum xz_ret xz_result;
+ 	struct xz_buf iobuf;
+ 	struct xz_dec *state;
+ 	unsigned char *membuf;
+@@ -63,9 +64,8 @@ unpack_xz_stream(transformer_aux_data_t
+ 	/* Limit memory usage to about 64 MiB. */
+ 	state = xz_dec_init(XZ_DYNALLOC, 64*1024*1024);
+ 
++	xz_result = X_OK;
+ 	while (1) {
+-		enum xz_ret r;
+-
+ 		if (iobuf.in_pos == iobuf.in_size) {
+ 			int rd = safe_read(src_fd, membuf, BUFSIZ);
+ 			if (rd < 0) {
+@@ -73,28 +73,57 @@ unpack_xz_stream(transformer_aux_data_t
+ 				total = -1;
+ 				break;
+ 			}
++			if (rd == 0 && xz_result == XZ_STREAM_END)
++				break;
+ 			iobuf.in_size = rd;
+ 			iobuf.in_pos = 0;
+ 		}
++		if (xz_result == XZ_STREAM_END) {
++			/*
++			 * Try to start decoding next concatenated stream.
++			 * Stream padding must always be a multiple of four
++			 * bytes to preserve four-byte alignment. To keep the
++			 * code slightly smaller, we aren't as strict here as
++			 * the .xz spec requires. We just skip all zero-bytes
++			 * without checking the alignment and thus can accept
++			 * files that aren't valid, e.g. the XZ utils test
++			 * files bad-0pad-empty.xz and bad-0catpad-empty.xz.
++			 */
++			do {
++				if (membuf[iobuf.in_pos] != 0) {
++					xz_dec_reset(state);
++					goto do_run;
++				}
++				iobuf.in_pos++;
++			} while (iobuf.in_pos < iobuf.in_size);
++		}
++ do_run:
+ //		bb_error_msg(">in pos:%d size:%d out pos:%d size:%d",
+ //				iobuf.in_pos, iobuf.in_size, iobuf.out_pos, iobuf.out_size);
+-		r = xz_dec_run(state, &iobuf);
++		xz_result = xz_dec_run(state, &iobuf);
+ //		bb_error_msg("<in pos:%d size:%d out pos:%d size:%d r:%d",
+-//				iobuf.in_pos, iobuf.in_size, iobuf.out_pos, iobuf.out_size, r);
++//				iobuf.in_pos, iobuf.in_size, iobuf.out_pos, iobuf.out_size, xz_result);
+ 		if (iobuf.out_pos) {
+ 			xwrite(dst_fd, iobuf.out, iobuf.out_pos);
+ 			IF_DESKTOP(total += iobuf.out_pos;)
+ 			iobuf.out_pos = 0;
+ 		}
+-		if (r == XZ_STREAM_END) {
+-			break;
++		if (xz_result == XZ_STREAM_END) {
++			/*
++			 * Can just "break;" here, if not for concatenated
++			 * .xz streams.
++			 * Checking for padding may require buffer
++			 * replenishment. Can't do it here.
++			 */
++			continue;
+ 		}
+-		if (r != XZ_OK && r != XZ_UNSUPPORTED_CHECK) {
++		if (xz_result != XZ_OK && xz_result != XZ_UNSUPPORTED_CHECK) {
+ 			bb_error_msg("corrupted data");
+ 			total = -1;
+ 			break;
+ 		}
+ 	}
++
+ 	xz_dec_end(state);
+ 	free(membuf);
+ 

package/collectd/collectd.mk

@@ -122,6 +122,14 @@ ifeq ($(BR2_PACKAGE_LIBGCRYPT),y)
 	COLLECTD_CONF_OPT += --with-libgcrypt=$(STAGING_DIR)/usr
 endif
 
+# released software should not break on minor warnings
+define COLLECTD_DROP_WERROR
+	$(SED) 's/-Werror//' \
+		$(@D)/src/Makefile.in $(@D)/src/libcollectdclient/Makefile.in
+endef
+
+COLLECTD_POST_PATCH_HOOKS += COLLECTD_DROP_WERROR
+
 define COLLECTD_INSTALL_TARGET_CMDS
 	$(MAKE) DESTDIR=$(TARGET_DIR) -C $(@D) install
 	rm -f $(TARGET_DIR)/usr/bin/collectd-nagios

package/conntrack-tools/Config.in

@@ -2,6 +2,7 @@ config BR2_PACKAGE_CONNTRACK_TOOLS
 	bool "conntrack-tools"
 	depends on BR2_INET_IPV6
 	depends on BR2_LARGEFILE
+	depends on BR2_USE_MMU # fork()
 	select BR2_PACKAGE_LIBNETFILTER_CONNTRACK
 	select BR2_PACKAGE_LIBNETFILTER_CTHELPER
 	select BR2_PACKAGE_LIBNETFILTER_CTTIMEOUT

package/dialog/Config.in

@@ -1,6 +1,7 @@
 config BR2_PACKAGE_DIALOG
 	bool "dialog"
 	depends on BR2_TOOLCHAIN_HAS_THREADS # fork()
+	depends on BR2_USE_MMU # fork()
 	select BR2_PACKAGE_NCURSES
 	select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE
 	help

package/enlightenment/enlightenment.mk

@@ -28,6 +28,13 @@ ENLIGHTENMENT_CONF_OPT = --with-edje-cc=$(HOST_DIR)/usr/bin/edje_cc \
 			 --with-eet-eet=$(HOST_DIR)/usr/bin/eet \
 			 --disable-rpath
 
+# alsa backend needs mixer support
+ifeq ($(BR2_PACKAGE_ALSA_LIB)$(BR2_PACKAGE_ALSA_LIB_MIXER),yy)
+ENLIGHTENMENT_DEPENDENCIES += alsa-lib
+else
+ENLIGHTENMENT_CONF_ENV += enable_alsa=no
+endif
+
 ifeq ($(BR2_HAVE_DOCUMENTATION),)
 define ENLIGHTENMENT_REMOVE_DOCUMENTATION
 	rm -rf $(TARGET_DIR)/usr/share/enlightenment/doc/

package/flashbench/flashbench.mk

@@ -11,8 +11,8 @@ FLASHBENCH_LICENSE_FILES = COPYING
 
 FLASHBENCH_CFLAGS = $(TARGET_CFLAGS)
 
-ifeq ($(BR2_microblaze),y)
-# microblaze toolchain only provides LLONG_MAX when used with gnu99 dialect
+ifeq ($(BR2_microblaze)$(BR2_sh2a),y)
+# microblaze and sh2a toolchains only provide LLONG_MAX when used with gnu99 dialect
 FLASHBENCH_CFLAGS += -std=gnu99
 endif
 

package/haserl/Config.in

@@ -1,5 +1,6 @@
 config BR2_PACKAGE_HASERL
 	bool "haserl"
+	depends on BR2_USE_MMU # fork()
 	help
 	  Haserl is a small cgi wrapper that enables shell scripts to be
 	  embedded into html documents. It is intended for environments

package/keyutils/Config.in

@@ -1,6 +1,7 @@
 config BR2_PACKAGE_KEYUTILS
 	bool "keyutils"
 	depends on !BR2_avr32 && !BR2_microblaze
+	depends on BR2_USE_MMU # fork()
 	help
 	  These tools are used to control the key management system
 	  built into the Linux kernel.

package/libffi/libffi-002-fix-ppc-nofpr.patch

@@ -0,0 +1,29 @@
+From: Gilles Talis <gilles.talis@gmail.com>
+
+On PPC, if __NO_FPRS__ is defined, fparg_count and NUM_FPR_ARG_REGISTERS
+are not defined, thus must not be used.
+
+Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
+---
+ src/powerpc/ffi.c |    3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/src/powerpc/ffi.c b/src/powerpc/ffi.c
+index f3a96a1..9c69584 100644
+--- a/src/powerpc/ffi.c
++++ b/src/powerpc/ffi.c
+@@ -376,9 +376,10 @@ ffi_prep_args_SYSV (extended_cif *ecif, unsigned *const stack)
+      with the number found in ffi_prep_cif_machdep().  However, intarg_count
+      is incremeneted whenever we place an FP arg on the stack, so account for
+      that before our assert test.  */
++#ifndef __NO_FPRS__
+   if (fparg_count > NUM_FPR_ARG_REGISTERS)
+     intarg_count -= fparg_count - NUM_FPR_ARG_REGISTERS;
+-#ifndef __NO_FPRS__
++
+   FFI_ASSERT (fpr_base.u
+ 	      <= stacktop.u - ASM_NEEDS_REGISTERS - NUM_GPR_ARG_REGISTERS);
+ #endif
+-- 
+1.7.10.4
+

package/libgtk2/Config.in

@@ -29,3 +29,6 @@ config BR2_PACKAGE_LIBGTK2_DEMO
 
 comment "libgtk2 requires a toolchain with WCHAR and C++ support"
 	depends on !BR2_USE_WCHAR || !BR2_INSTALL_LIBSTDCPP
+
+comment "WARNING: Libgtk2 directfb backend is deprecated"
+	depends on BR2_PACKAGE_LIBGTK2 && !BR2_PACKAGE_XORG7

package/libmad/Config.in

@@ -1,5 +1,6 @@
 config BR2_PACKAGE_LIBMAD
 	bool "libmad"
+	select BR2_PACKAGE_LIBMAD_ASO if BR2_avr32
 	help
 	  High-quality MPEG audio decoder.  All computations are performed
 	  with fixed-point integer arithmetic, making it ideal for systems

package/libupnp/Config.in

@@ -1,6 +1,7 @@
 config BR2_PACKAGE_LIBUPNP
 	bool "libupnp"
 	depends on BR2_LARGEFILE
+	depends on BR2_TOOLCHAIN_HAS_THREADS
 	help
 	  The portable SDK for UPnP(tm) Devices (libupnp) provides developers
 	  with an API and open source code for building control points,
@@ -9,5 +10,5 @@ config BR2_PACKAGE_LIBUPNP
 
 	  http://pupnp.sourceforge.net/
 
-comment "libupnp requires a toolchain with LARGEFILE support"
-	depends on !BR2_LARGEFILE
+comment "libupnp requires a toolchain with LARGEFILE and thread support"
+	depends on !(BR2_LARGEFILE && BR2_TOOLCHAIN_HAS_THREADS)

package/linux-firmware/linux-firmware.mk

@@ -3,8 +3,9 @@
 # linux-firmware
 #
 #############################################################
+
 LINUX_FIRMWARE_VERSION = 65a5163b8bb77bd7759efa3ca780867fcaed89b0
-LINUX_FIRMWARE_SITE = git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
+LINUX_FIRMWARE_SITE = http://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
 LINUX_FIRMWARE_SITE_METHOD = git
 
 # rt2501/rt61

package/linux-fusion/linux-fusion.mk

@@ -3,7 +3,7 @@
 # linux-fusion
 #
 #############################################################
-LINUX_FUSION_VERSION = 8.10.4
+LINUX_FUSION_VERSION = 9.0.0
 LINUX_FUSION_SOURCE = linux-fusion-$(LINUX_FUSION_VERSION).tar.gz
 LINUX_FUSION_SITE = http://directfb.org/downloads/Core/linux-fusion
 LINUX_FUSION_INSTALL_STAGING = YES

package/matchbox/Config.in

@@ -19,6 +19,7 @@ config BR2_PACKAGE_MATCHBOX_PANEL
 config BR2_PACKAGE_MATCHBOX_DESKTOP
 	bool "Matchbox Desktop"
 	depends on BR2_PACKAGE_MATCHBOX
+	select BR2_PACKAGE_ZLIB
 	help
 	  A PDA style application launcher or 'item browser'.
 

package/matchbox/matchbox-desktop/matchbox-desktop.mk

@@ -10,7 +10,7 @@ MATCHBOX_DESKTOP_SOURCE = matchbox-desktop-$(MATCHBOX_DESKTOP_VERSION).tar.bz2
 MATCHBOX_DESKTOP_SITE = http://downloads.yoctoproject.org/releases/matchbox/matchbox-desktop/$(MATCHBOX_DESKTOP_VERSION_MAJOR)
 MATCHBOX_DESKTOP_LICENSE = GPLv2+
 MATCHBOX_DESKTOP_LICENSE_FILES = COPYING
-MATCHBOX_DESKTOP_DEPENDENCIES = matchbox-lib
+MATCHBOX_DESKTOP_DEPENDENCIES = matchbox-lib zlib
 MATCHBOX_DESKTOP_CONF_OPT = --enable-expat
 
 # The bundled configure script does not properly replace LIBADD_DL, so

package/matchbox/matchbox-wm/matchbox-wm-defaulttheme.patch

@@ -0,0 +1,47 @@
+[PATCH] fix mbtheme build issue when png support is disabled
+
+DEFAULTTHEME{,NAME} is not defined when png support is disabled, leading
+to compile errors in mbtheme.c:
+
+mbtheme.c: In function 'show_parse_error':
+mbtheme.c:2422:28: error: 'DEFAULTTHEME' undeclared (first use in this function)
+mbtheme.c:2422:28: note: each undeclared identifier is reported only once for each function it appears in
+mbtheme.c: In function 'mbtheme_init':
+mbtheme.c:2448:30: error: 'DEFAULTTHEME' undeclared (first use in this function)
+mbtheme.c:2470:25: error: 'DEFAULTTHEMENAME' undeclared (first use in this function)
+
+Fix it by unconditionally defining them as the values used are the same
+in png / !png cases anyway.
+
+Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+---
+ src/structs.h |    9 ---------
+ 1 file changed, 9 deletions(-)
+
+Index: matchbox-window-manager-1.2/src/structs.h
+===================================================================
+--- matchbox-window-manager-1.2.orig/src/structs.h
++++ matchbox-window-manager-1.2/src/structs.h
+@@ -81,8 +81,6 @@
+ 
+ #define GENERIC_ICON        PKGDATADIR "/mbnoapp.xpm"
+ 
+-#ifdef MB_HAVE_PNG
+-
+ #define DEFAULT_THEME       DATADIR "/themes/Default/matchbox/theme.xml"
+ 
+ #define DEFAULTTHEME       DATADIR "/themes/Default/matchbox/theme.xml"
+@@ -91,13 +89,6 @@
+ 
+ #define DEFAULTTHEMENAME  "Default"
+ 
+-#else
+-
+-#define DEFAULT_THEME       DATADIR "/themes/Default/matchbox/theme.xml"
+-#define DEFAULT_THEME_NAME  "Default"
+-
+-#endif
+-
+ #define CONFDEFAULTS       PKGDATADIR "/defaults"
+ 
+ /* Simple Macros  */

package/mii-diag/mii-diag.mk

@@ -21,11 +21,11 @@ endef
 MII_DIAG_POST_PATCH_HOOKS = MII_DIAG_DEBIAN_PATCHES
 
 define MII_DIAG_BUILD_CMDS
-	$(MAKE) $(MII_DIAG_MAKE_OPT) -C $(@D)
+	$(MAKE) $(MII_DIAG_MAKE_OPT) -C $(@D) mii-diag
 endef
 
 define MII_DIAG_INSTALL_TARGET_CMDS
-	$(MAKE) DESTDIR=$(TARGET_DIR) -C $(@D) install
+	$(MAKE) DESTDIR=$(TARGET_DIR) -C $(@D) install-mii-diag
 endef
 
 define MII_DIAG_UNINSTALL_TARGET_CMDS

package/quota/Config.in

@@ -2,6 +2,7 @@ config BR2_PACKAGE_QUOTA
 	bool "quota"
 	depends on BR2_LARGEFILE
 	depends on BR2_USE_WCHAR
+	depends on BR2_USE_MMU # fork()
 	select BR2_PACKAGE_UTIL_LINUX
 	select BR2_PACKAGE_UTIL_LINUX_MOUNT
 	select BR2_PACKAGE_GETTEXT if BR2_NEEDS_GETTEXT_IF_LOCALE

package/ruby/ruby.mk

@@ -4,11 +4,12 @@
 #
 #############################################################
 
-RUBY_VERSION = 1.9.3-p362
+RUBY_VERSION = 1.9.3-p392
 RUBY_SITE = ftp://ftp.ruby-lang.org/pub/ruby/1.9
 RUBY_DEPENDENCIES = host-pkgconf host-ruby
 HOST_RUBY_DEPENDENCIES = host-pkgconf
 RUBY_MAKE_ENV = $(TARGET_MAKE_ENV)
+RUBY_MAKE = $(MAKE1)
 RUBY_CONF_OPT = --disable-install-doc --disable-rpath
 HOST_RUBY_CONF_OPT = --disable-install-doc --with-out-ext=curses,readline
 RUBY_LICENSE = Ruby

package/spawn-fcgi/Config.in

@@ -1,5 +1,6 @@
 config BR2_PACKAGE_SPAWN_FCGI
 	bool "spawn-fcgi"
+	depends on BR2_USE_MMU # fork()
 	help
 	  FastCGI process spawner.
 	  Project split from lighttpd.

package/ushare/Config.in

@@ -1,6 +1,7 @@
 config BR2_PACKAGE_USHARE
 	bool "ushare"
 	depends on BR2_LARGEFILE
+	depends on BR2_TOOLCHAIN_HAS_THREADS # libupnp
 	select BR2_PACKAGE_LIBUPNP
 	select BR2_PACKAGE_GETTEXT if BR2_NEEDS_GETTEXT_IF_LOCALE
 	help
@@ -10,5 +11,5 @@ config BR2_PACKAGE_USHARE
 
 	  http://ushare.geexbox.org/
 
-comment "ushare requires a toolchain with LARGEFILE support"
-	depends on !BR2_LARGEFILE
+comment "ushare requires a toolchain with LARGEFILE and thread support"
+	depends on !(BR2_LARGEFILE && BR2_TOOLCHAIN_HAS_THREADS)

package/vtun/Config.in

@@ -2,6 +2,7 @@ config BR2_PACKAGE_VTUN
 	bool "vtun - BEWARE: read package/vtun/README.txt before use"
 	select BR2_PACKAGE_LZO
 	select BR2_PACKAGE_OPENSSL
+	select BR2_PACKAGE_ZLIB
 	help
 	  Tool for easily creating Virtual Tunnels over TCP/IP networks
 	  with traffic shaping, compression, and encryption.

toolchain/kernel-headers/kernel-headers.mk

@@ -36,15 +36,6 @@ LINUX_HEADERS_CAT:=$(BZCAT)
 LINUX_HEADERS_UNPACK_DIR:=$(TOOLCHAIN_DIR)/linux-$(LINUX_HEADERS_VERSION)
 LINUX_HEADERS_DIR:=$(TOOLCHAIN_DIR)/linux
 
-# long term support kernels are stored in a longterm/v2.6.x subdir
-ifeq ($(BR2_KERNEL_HEADERS_2_6_35),y)
-DEFAULT_KERNEL_HEADERS_MAJOR := \
-	$(shell echo $(DEFAULT_KERNEL_HEADERS) | sed 's/\.[0-9]*$$//')
-# += adds a space between
-LINUX_HEADERS_SITE:= \
-	$(LINUX_HEADERS_SITE)longterm/v$(DEFAULT_KERNEL_HEADERS_MAJOR)/
-endif
-
 LINUX_HEADERS_DEPENDS:=
 
 $(LINUX_HEADERS_UNPACK_DIR)/.unpacked: $(DL_DIR)/$(LINUX_HEADERS_SOURCE)

toolchain/uClibc/uClibc-0.9.33.2-bits-time.h-sync-with-glibc-2.16.patch

@@ -0,0 +1,36 @@
+From 3d1b82c7d9dce11c733fe23a85df7f975c7e2486 Mon Sep 17 00:00:00 2001
+From: Peter Korsgaard <jacmet@sunsite.dk>
+Date: Tue, 3 Jul 2012 15:54:57 +0200
+Subject: [PATCH] bits/time.h: sync with glibc 2.16
+
+CLOCK_MONOTONIC_RAW is available since 2.6.28
+(2d42244ae71d: clocksource: introduce CLOCK_MONOTONIC_RAW), and
+CLOCK_*_COARSE since 2.6.32 (da15cfdae033: time: Introduce
+CLOCK_REALTIME_COARSE).
+
+Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
+---
+ libc/sysdeps/linux/common/bits/time.h |    6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/libc/sysdeps/linux/common/bits/time.h b/libc/sysdeps/linux/common/bits/time.h
+index 7ed54bf..c871223 100644
+--- a/libc/sysdeps/linux/common/bits/time.h
++++ b/libc/sysdeps/linux/common/bits/time.h
+@@ -54,6 +54,12 @@
+ #   define CLOCK_PROCESS_CPUTIME_ID	2
+ /* Thread-specific CPU-time clock.  */
+ #   define CLOCK_THREAD_CPUTIME_ID	3
++/* Monotonic system-wide clock, not adjusted for frequency scaling.  */
++#   define CLOCK_MONOTONIC_RAW		4
++/* Identifier for system-wide realtime clock, updated only on ticks.  */
++#   define CLOCK_REALTIME_COARSE	5
++/* Monotonic system-wide clock, updated only on ticks.  */
++#   define CLOCK_MONOTONIC_COARSE	6
+ 
+ /* Flag to indicate time is absolute.  */
+ #   define TIMER_ABSTIME		1
+-- 
+1.7.10.4
+