Update for 2013.11

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES

@@ -1,3 +1,206 @@
+2013.11, Released November 30th, 2013:
+
+	Minor fixes.
+
+	Updated/fixed packages: apr, binutils, dbus-python, dropwatch,
+	ecryptfs-utils, eglibc, gdb, gpsd, grantlee, hostapd,
+	iptables, qlibiscsi, libnspr, libnss, libpfm4, libtool,
+	lua-ev, lvm2, mplayer, qt, qt5, quagga, ruby, tinymembench,
+	tvheadend, util-linux, wpa_supplicant
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#1279: Buildroot compiled Busybox and Coreutils LFS issues
+	#2995: -fstack-protector-all causes ssh to SIGSEGV
+	#5570: Cannot compile software on the target machine
+	#6428: util-linux libmount segfaults with patch from buildroot
+	#6500: php fails to build for armel
+	#6554: gdb needs to dependents on host texinfo
+	#6692: GNU nano fails to compile for x86_64
+	#6704: wpa_supplicant: fix wrong path to executable file in D-Bus
+
+2013.11-rc3, Released November 26th, 2013
+
+	Fixes all over the tree.
+
+	Architecture: Mark MIPS I, II, III and IV as deprecated.
+
+	Updated/fixed packages: beecrypt, dbus, e2fsprogs, libcap-ng,
+	libglib2, libroxml, libsigsegv, libvncserver, lxc, mdadm,
+	mongoose, nut, ola, omniorb, openssl, pcre, php, poco,
+	protobuf-c, pv, qt5base, ruby, schifra, squid, sunxi-mail,
+	swig, ti-gfx, tinymembench, uclibc, udisks, vim
+
+2013.11-rc2, Released November 18th, 2013
+
+	Fixes all over the tree.
+
+	Defconfigs: qemu_arm_versatile, qemu_arm_nuri, sheevaplug:
+	Adjust kernel versions.
+
+	Toolchain: avr32: fix for modern kernel headers
+
+	Bootloader: Barebox updated to 2013.10.1
+
+	Updated/fixed packages: dhcp, e2fsprogs, gst1-plugins-bad,
+	libcurl, libvncserver, nano, pc, qt5base, squashfs, ttcp,
+	wayland, wvstreams
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#3601: DHCPD S80dhcp-server startup script issues
+	#6320: Fix kernel compile issue if BR2_LINUX_KERNEL_CUSTOM_GIT_VERS..
+	#6416: Xenomai package, patch alternative
+	#6590: directfb-examples build failed whit linaro toolchain
+
+2013.11-rc1, Released November 12th, 2013
+
+	Architectures: Nios-II support, MIPS arch handling fixes
+
+	Defconfigs: cubieboard2, freescale i.MX 6sololite evk,
+	sabre-sd, wandboard added, rpi renamed to raspberrypi_defconfig
+
+	Toolchain: glibc support, upstream uClibc fixes, uClibc 0.9.31
+	for avr32, crosstool-ng backend removed, external musl
+	toolchain support, gcc 4.8.2, updated Linaro external
+	toolchains. Fortran and objective-C support deprecated,
+	mudflap support
+
+	Bootloaders: U-Boot: u-boot.imx support, version bumps
+
+	Linux: use kmod instead of module-init-tools
+
+	System: default to devtmpfs for /dev
+
+	Infrastructure: Make 3.82 fixes, locales generation fixes, CVS
+	download support, post-rsync hooks
+
+	Fs: u-boot image support for cpio
+
+	Updated/fixed packages: aircrack-ng, alsamixergui, apr,
+	apr-util, atk, automake, bellagio, berkeleydb, bind, binutils,
+	bison, boost, busybox, can-utils, ccache, ccid, cgilua,
+	chrony, cifs-utils, cjson, collectd, connman, conntrack-tools,
+	copas, cppcms, cppzmq, czmq, dash, dbus, dhcpcd, diffutils,
+	directfb, dmidecode, dnsmaqs, docker, dosfstools, dropbear,
+	dropwatch, ebtables, eglibc, elf2flt, empty, enchant, erlang,
+	ethtool, fbgrab, fbv, fdk-aac, feh, ffmpeg, file, findutils,
+	fltk, fmtools, freetype, gdk-pixbuf, gettext, git,
+	glib-networking, gmp, gnupg, gnutls, gpu-viv-bin-mx6q, gsl,
+	gstreamer, gstreamer1, gst1-plugins-{bad,base,good,ugly},
+	gtest, gutenprint, hplip, i2c-tools, icu, ifplugd,
+	imagemagick, iozone, iproute2, ipset, iptables, iw, jamvm,
+	jansson, jpeg-turbo, kismet, kmod, lcms2, libassuan, libcap,
+	libcap-ng, libcdaudio, libcec, libcue, libcurl, libdrm,
+	libedit, libevas, libevent, libfreefare, libfuse,
+	libgpg-error, libiconv, liblog4c-localtime, libmicrohttpd,
+	libmnl, libmodbus,
+	libnetfilter_{acct,conntrack,cthelper,cttimeout,log,queue},
+	libnfnetlink, libnl, libpng, libqmi, libqrencode, libroxml,
+	libsecret, libsigsegv, libsoup, libtirpc, libunwind, libusb,
+	libvpx, lighttpd, linphone, linux-pam, lmbench,
+	lockfile-progs, log4cxx, logrotate, logsurfer, ltp-testsuite,
+	ltrace, luacrypto, luaposix, lvm2, m4, matchbox-lib,
+	media-ctl, mediastreamer, minicom, minidlna, mongoose, monit,
+	mpc, mpd, mpg123, mplayer, mrouted, mtdev, mutt, mysql_client,
+	nano, ncftp, ndisc6, neard, neardal, neon, net-snmp, netatalk,
+	netcat, netkitbase, netperf, netplug, nettle, nfacct,
+	nfs-utils, ngircd, ngrep, noip, nuttcp, olsr, openssh, opkg,
+	oprofile, opus-tools, orc, ortp, pciutils, pcre, pcsc-lite,
+	perf, perl, perl-cross, php, picocom, pkgconf, polarssl,
+	poppler, pppd, proftpd, protobuf, proxychains-ng, pulseaudio,
+	pv, qemu, qt, qt5base, qt5webkit, quagga, radvd, redis,
+	rpi-{firmware,userland}, rrdtool, rsync, rtorrent, ruby,
+	samba, scons, screen, sdl_sound, ser2net, setserial,
+	smartmontools, socat, socketcand, sqlcipher, sqlite, squid,
+	stress, strongswan, stunnel, sudo, syslinux, systemd,
+	sysvinit, tcl, ti-gfx, time, transmission, tremor, tslib,
+	tstools, tvheadend, tzdata, uboot-tools, uclibc, udpcast,
+	uemacs, ulogd, usb_modeswitch{,_data}, util-linux, vala,
+	valgrind, vde2, vorbus-tools, vpnc, vsftpd, vtun, wayland,
+	webkit, webp, webrtc-audio-processing, weston, wget,
+	wireshark, wsapi, xavante, xdriver_xf86-video-geode, xenomai,
+	xinetd, xlib_libpthread-stubs, xl2tp, xmlstarlet,
+	xserver_xorg-server, xz, zeromq, zic, zmqpp
+
+	New packages: aiccu, autossh, bc, civetweb, cppdb, cryptsetup,
+	duma, eigen, harfbuzz, igmpproxy, iputils, jq, knock, kobs-ng,
+	lesstif, libcgroup, libsepol, libsoc, libssh2, luasec, luasql,
+	lxc, nut, ola, omniorb, openpowerlink, orbit, p910nd, psplash,
+	python-crc16, python-ipy, python-pyzmq, qt5sensors,
+	qt5serialport, qt5x11extras, snmppp, subversion, tcping,
+	trace-cmd, xscreensaver, zsh
+
+	Removed packages: module-init-tools
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#1138: Buildroot fails to build packages if BR2_GCC_SHARED_LIBGCC=y
+	#5408: qt build failure with Sourcery CodeBench ARM 2010.09
+	#5630: makefile error with toolchain helpers.mk
+	#5672: htop: remove X11 stuff
+	#5678: linux.mk: linux-menuconfig fails
+	#5696: python3 installation is too large, patches from python2 needed
+	#5978: Erlang does not build for arm in 2013.02-rc3
+	#6392: Extended ARM uImage kernel options
+	#6404: Buildroot's coreutils 'uname -p' reports 'Unknown' on recent..
+	#6428: util-linux libmount segfaults with patch from buildroot
+	#6452: eglibc from Linaro 2013.07 not copied to target correctly
+	#6566: PHP segfault when crosscompiled to mips64 - patch included
+	#6572: [PowerPC] Buildroot uses wrong external toolchain libraries..
+	#6578: udisks package broken
+	#6602: ebtables 64 bit kernel + 32 bit userland alignment error..
+	#6608: ebtables missing ethertypes - fix included
+	#6620: Sysvinit package missing killall5 and symlinks - patch included
+	#6632: CMake use host pkg-config
+	#6638: pkgconf doesn't download
+	#6644: "all" target doesn't work in out-of-tree builds
+	#6650: Segmentation fault when trying to build latest buildroot
+	#6668: iptables limit module alignment problem on mips64
+
+2013.08, Released August 31th, 2013:
+
+	Minor fixes.
+
+	Documentation build fixed.
+
+	Updated/fixed packages: ltrace, strongswan
+
+2013.08-rc3, Released August 29th, 2013:
+
+	Fixes all over the tree.
+
+	External toolchain lib32/lib64 handling, ABI name for EABIhf,
+	misc fixes for generatelocales, apply-patches and module
+	stripping.
+
+	Top level menu names reordered and renamed for clarity.
+
+	Updated/fixed packages: acl, attr, bash, dbus, directfb,
+	dvb-apps, kexec, kmod, libbsd, linux-fusion, mesa3d, minidlna,
+	openssh, openssl, pulseaudio, python-setuptools, qt5,
+	qt5webkit, redis, strongswan, sunxi-mali
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#6464: dbus-daemon-launch-helper needs setuid
+
+2013.08-rc2, Released August 16th 2013:
+
+	Documentation improvements.
+
+	External toolchains fixes.
+
+	Updated/fixed packages: aircrack-ng, bash, boost, cairo,
+	cppcms, eglibc, ffmpeg, gcc, git, gnupg, imagemagick, libcec,
+	libffi, libgcrypt, linux, linux-headers, ltrace, netatalk,
+	opencv, opengl, readline, samba, strongswan, sunxi-cedarx,
+	uclibc, udev, wayland, webkit, zeromq.
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#6440: typo in ffmpeg makefile
+
 2013.08-rc1, Released August 5th, 2013:
 
 	Architectures:

Config.in

@@ -42,6 +42,10 @@ config BR2_GIT
 	string "Git command"
 	default "git"
 
+config BR2_CVS
+	string "CVS command"
+	default "cvs"
+
 config BR2_LOCALFILES
 	string "Local files retrieval command"
 	default "cp"
@@ -286,7 +290,7 @@ choice
 
 config BR2_STRIP_strip
 	bool "strip"
-	depends on !BR2_ELF2FLT
+	depends on !BR2_PACKAGE_HOST_ELF2FLT
 	help
 	  Binaries and libraries in the target filesystem will be
 	  stripped using the normal 'strip' command. This allows to
@@ -297,7 +301,7 @@ config BR2_STRIP_strip
 config BR2_STRIP_sstrip
 	bool "sstrip"
 	select BR2_PACKAGE_SSTRIP_HOST
-	depends on !BR2_ELF2FLT
+	depends on !BR2_PACKAGE_HOST_ELF2FLT
 	help
 	  Binaries and libraries in the target filesystem will be
 	  stripped using the 'sstrip' command, which strips a little
@@ -398,6 +402,23 @@ config BR2_OPTIMIZE_S
 
 endchoice
 
+config BR2_ENABLE_SSP
+	bool "build code with Stack Smashing Protection"
+	depends on BR2_TOOLCHAIN_HAS_SSP
+	help
+	  Enable stack smashing protection support using GCCs
+	  -fstack-protector-all option.
+
+	  See http://www.linuxfromscratch.org/hints/downloads/files/ssp.txt
+	  for details.
+
+	  Note that this requires the toolchain to have SSP
+	  support. This is always the case for glibc and eglibc
+	  toolchain, but is optional in uClibc toolchains.
+
+comment "enabling Stack Smashing Protection requires support in the toolchain"
+	depends on !BR2_TOOLCHAIN_HAS_SSP
+
 config BR2_PREFER_STATIC_LIB
 	bool "prefer static libraries"
 	help
@@ -450,14 +471,14 @@ source "toolchain/Config.in"
 
 source "system/Config.in"
 
-source "package/Config.in"
+source "linux/Config.in"
 
-source "package/Config.in.host"
+source "package/Config.in"
 
 source "fs/Config.in"
 
 source "boot/Config.in"
 
-source "linux/Config.in"
+source "package/Config.in.host"
 
 source "Config.in.legacy"

Config.in.legacy

@@ -1,13 +1,9 @@
 #
 # Config.in.legacy - support for backward compatibility
 #
-# When an existing Config.in symbol is removed, it should be added again in this
-# file, and take appropriate action to approximate backward compatibility. If
-# there is an equivalent (set of) new symbols, these can just be select'ed by
-# the old symbol. This makes sure that running 'make oldconfig' will make things
-# "just work" when upgrading to a new buildroot version. If the change is too
-# fundamental and cannot be fixed by a simple select, then the old symbol should
-# select BR2_LEGACY.  If that symbol is set, the build will issue an error.
+# When an existing Config.in symbol is removed, it should be added again in
+# this file, and take appropriate action to approximate backward compatibility.
+# This will make the transition for the user more convenient.
 #
 # When adding legacy symbols to this file, add them to the front. The oldest
 # symbols will be removed again after about two years.
@@ -15,6 +11,46 @@
 # The symbol should be copied as-is from the place where it was previously
 # defined, but the help text should be removed or replaced with something that
 # explains how to fix it.
+#
+# For bool options, the old symbol should select BR2_LEGACY, so that the user
+# is informed at build-time about selected legacy options.
+# If there is an equivalent (set of) new symbols, these should be select'ed by
+# the old symbol for backwards compatibility.
+#
+# For string options, it is not possible to directly select another symbol. In
+# this case, a hidden wrap bool option has to be added, that defaults to y if
+# the old string is not set at its default value. The wrap symbol should select
+# BR2_LEGACY.
+# If the original symbol has been renamed, the new symbol should use the value
+# of the old symbol as default. This requires a change outside of
+# Config.in.legacy, and this should be clearly marked as such below, so that
+# removal of legacy options also include the removal of these external
+# references.
+#
+# [Example: renaming a string option from FOO to BAR]
+# original symbol:
+#     config BR2_FOO_STRING
+#             string "Some foo string"
+#
+# becomes:
+#     config BR2_BAR_STRING
+#             string "Some bar string"
+#             default BR2_FOO_STRING if BR2_FOO_STRING != ""  # legacy
+#
+# and in Config.in.legacy:
+#     config BR2_FOO_STRING
+#             string "The foo string has been renamed"
+#             help
+#               <suitable help text>
+#
+#     config BR2_FOO_STRING_WRAP
+#             bool
+#             default y if BR2_FOO_STRING != ""
+#             select BR2_LEGACY
+#
+#     # Note: BR2_FOO_STRING is still referenced from package/foo/Config.in
+#
+# [End of example]
 
 config BR2_LEGACY
 	bool
@@ -32,21 +68,150 @@ comment "Legacy detected: check the content of the menu below"
 menu "Legacy config options"
 
 if BR2_LEGACY
+comment "----------------------------------------------------"
 comment "Your old configuration uses legacy options that no  "
-comment "longer exist in buildroot.                          "
-comment "Please look at the options which have been selected "
-comment "and read their help text.                           "
-comment "As long as these options stay selected, the build   "
+comment "longer exist in buildroot, as indicated in the menu "
+comment "below. As long as these options stay selected, or in"
+comment "case of string options are non-empty, the build     "
 comment "will fail.                                          "
+comment "*                                                   "
+comment "Where possible, an automatic conversion from old to "
+comment "new symbols has been performed. Before making any   "
+comment "change in this legacy menu, make sure to exit the   "
+comment "configuration editor a first time and save the      "
+comment "configuration. Otherwise, the automatic conversion  "
+comment "of symbols will be lost.                            "
+comment "*                                                   "
+comment "After this initial save, reopen the configuration   "
+comment "editor, inspect the options selected below, read    "
+comment "their help texts, and verify/update the new         "
+comment "configuration in the corresponding configuration    "
+comment "menus. When everything is ok, you can disable the   "
+comment "legacy options in the menu below. Once you have     "
+comment "disabled all legacy options, this text will         "
+comment "disappear and you will be able to start the build.  "
+comment "*                                                   "
 comment "Note: at some point in the future, the oldest legacy"
 comment "options will be removed, and configuration files    "
 comment "that still have those options set, will fail to     "
 comment "build, or run, in unpredictable ways.               "
+comment "----------------------------------------------------"
 endif
 
+###############################################################################
+comment "Legacy options removed in 2013.11"
+
+config BR2_PACKAGE_LVM2_DMSETUP_ONLY
+	bool "lvm2's 'dmsetup only' option removed"
+	select BR2_LEGACY
+	help
+	  The BR2_PACKAGE_LVM2_DMSETUP_ONLY was a negative option, which
+	  led to problems with other packages that need the full lvm2
+	  suite. Therefore, the option has been replaced with the positive
+	  BR2_PACKAGE_LVM2_STANDARD_INSTALL option.
+
+# Note: BR2_PACKAGE_LVM2_DMSETUP_ONLY is still referenced in package/lvm2/Config.in
+# in order to automatically propagate old configs
+
+config BR2_PACKAGE_QT_JAVASCRIPTCORE
+	bool "qt javascriptcore option removed"
+	select BR2_LEGACY
+	help
+	  The BR2_PACKAGE_QT_JAVASCRIPTCORE option was available to
+	  force the activation or disabling of the JIT compiler in the
+	  Qt Javascript interpreter. However, the JIT compiler is not
+	  available for all architectures, so forcing its activation
+	  does not always work. Moreover, Qt knows by itself for which
+	  architectures JIT support is possible, and will
+	  automatically enable it if possible.
+
+	  Therefore, this option was in fact useless, and causing
+	  build problems when enabled on architectures for which the
+	  JIT support was not available. It has been removed, and
+	  there is no replacement: Qt will enable JIT at compile time
+	  when possible.
+
+config BR2_PACKAGE_MODULE_INIT_TOOLS
+	bool "module-init-tools replaced by kmod"
+	select BR2_PACKAGE_KMOD
+	select BR2_PACKAGE_KMOD_TOOLS
+	select BR2_LEGACY
+	help
+	  The 'module-init-tools' package has been removed, since it
+	  has been depracated upstream and replaced by 'kmod'.
+
+config BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL
+	string "u-boot: the git repository URL option has been renamed"
+	help
+	  The option BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL has
+	  been renamed to BR2_TARGET_UBOOT_CUSTOM_REPO_URL.
+
+config BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL_WRAP
+	bool
+	default y if BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL != ""
+	select BR2_LEGACY
+
+# Note: BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL is still referenced from
+# boot/uboot/Config.in
+
+config BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION
+	string "u-boot: the git repository version option has been renamed"
+	help
+	  The option BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION has
+	  been renamed to BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION.
+
+config BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION_WRAP
+	bool
+	default y if BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION != ""
+	select BR2_LEGACY
+
+# Note: BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION is still referenced from
+# boot/uboot/Config.in
+
+config BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL
+	string "linux: the git repository URL option has been renamed"
+	help
+	  The option BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL has
+	  been renamed to
+	  BR2_LINUX_KERNEL_CUSTOM_REPO_URL.
+
+config BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL_WRAP
+	bool
+	default y if BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL != ""
+	select BR2_LEGACY
+
+# Note: BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL is still referenced from
+# linux/Config.in
+
+config BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION
+	string "linux: the git repository version option has been renamed"
+	help
+	  The option BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION has
+	  been renamed to
+	  BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION.
+
+config BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION_WRAP
+	bool
+	default y if BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION != ""
+	select BR2_LEGACY
+
+# Note: BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION is still referenced from
+# linux/Config.in
+
 ###############################################################################
 comment "Legacy options removed in 2013.08"
 
+config BR2_ARM_OABI
+	bool "ARM OABI support has been removed"
+	select BR2_LEGACY
+	help
+	  The support for the ARM OABI was deprecated since a while,
+	  and has been removed completely from Buildroot. It is also
+	  deprecated in upstream gcc, since gcc 4.7. People should
+	  switch to EABI instead, which should not be a problem as
+	  long as you don't have pre-built OABI binaries in your
+	  system that you can't recompile.
+
 config BR2_PACKAGE_DOSFSTOOLS_DOSFSCK
 	bool "dosfstools dosfsck renamed to fsck.fat"
 	select BR2_LEGACY
@@ -85,6 +250,23 @@ config BR2_VFP_FLOAT
 	  been replaced with a choice of options that allows to select
 	  between various VFP versions/capabilities.
 
+config BR2_PACKAGE_GCC_TARGET
+	bool "gcc on the target filesystem has been removed"
+	select BR2_LEGACY
+	help
+	  The support for gcc in the target filesystem was deprecated
+	  since a while, and has been removed completely from Buildroot.
+	  See Buildroot's documentation for more explanations.
+
+config BR2_HAVE_DEVFILES
+	bool "development files in target filesystem has been removed"
+	select BR2_LEGACY
+	help
+	  The installation of the development files in the target
+	  filesystem was deprecated since a while, and has been removed
+	  completely from Buildroot.
+	  See Buildroot's documentation for more explanations.
+
 ###############################################################################
 comment "Legacy options removed in 2013.05"
 

Makefile

@@ -1,4 +1,4 @@
-# Makefile for buildroot2
+# Makefile for buildroot
 #
 # Copyright (C) 1999-2005 by Erik Andersen <andersen@codepoet.org>
 # Copyright (C) 2006-2013 by the Buildroot developers <buildroot@uclibc.org>
@@ -24,7 +24,7 @@
 #--------------------------------------------------------------
 
 # Set and export the version string
-export BR2_VERSION:=2013.08-rc1
+export BR2_VERSION:=2013.11
 
 # Check for minimal make version (note: this check will break at make 10.x)
 MIN_MAKE_VERSION=3.81
@@ -91,6 +91,30 @@ EXTRAMAKEARGS = O=$(O)
 NEED_WRAPPER=y
 endif
 
+# bash prints the name of the directory on 'cd <dir>' if CDPATH is
+# set, so unset it here to not cause problems. Notice that the export
+# line doesn't affect the environment of $(shell ..) calls, so
+# explictly throw away any output from 'cd' here.
+export CDPATH:=
+BASE_DIR := $(shell mkdir -p $(O) && cd $(O) >/dev/null && pwd)
+$(if $(BASE_DIR),, $(error output directory "$(O)" does not exist))
+
+BUILD_DIR:=$(BASE_DIR)/build
+STAMP_DIR:=$(BASE_DIR)/stamps
+BINARIES_DIR:=$(BASE_DIR)/images
+TARGET_DIR:=$(BASE_DIR)/target
+# initial definition so that 'make clean' works for most users, even without
+# .config. HOST_DIR will be overwritten later when .config is included.
+HOST_DIR:=$(BASE_DIR)/host
+
+LEGAL_INFO_DIR=$(BASE_DIR)/legal-info
+REDIST_SOURCES_DIR=$(LEGAL_INFO_DIR)/sources
+LICENSE_FILES_DIR=$(LEGAL_INFO_DIR)/licenses
+LEGAL_MANIFEST_CSV=$(LEGAL_INFO_DIR)/manifest.csv
+LEGAL_LICENSES_TXT=$(LEGAL_INFO_DIR)/licenses.txt
+LEGAL_WARNINGS=$(LEGAL_INFO_DIR)/.warnings
+LEGAL_REPORT=$(LEGAL_INFO_DIR)/README
+
 BUILDROOT_CONFIG=$(CONFIG_DIR)/.config
 
 # Pull in the user's configuration file
@@ -175,6 +199,7 @@ export HOSTCC_NOCCACHE HOSTCXX_NOCCACHE
 # Make sure pkg-config doesn't look outside the buildroot tree
 unexport PKG_CONFIG_PATH
 unexport PKG_CONFIG_SYSROOT_DIR
+unexport PKG_CONFIG_LIBDIR
 
 # Having DESTDIR set in the environment confuses the installation
 # steps of some packages.
@@ -183,17 +208,6 @@ unexport DESTDIR
 # Causes breakage with packages that needs host-ruby
 unexport RUBYOPT
 
-# bash prints the name of the directory on 'cd <dir>' if CDPATH is
-# set, so unset it here to not cause problems. Notice that the export
-# line doesn't affect the environment of $(shell ..) calls, so
-# explictly throw away any output from 'cd' here.
-export CDPATH:=
-BASE_DIR := $(shell mkdir -p $(O) && cd $(O) >/dev/null && pwd)
-$(if $(BASE_DIR),, $(error output directory "$(O)" does not exist))
-
-BUILD_DIR:=$(BASE_DIR)/build
-
-
 ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 
 ################################################################################
@@ -222,17 +236,7 @@ GNU_HOST_NAME:=$(shell support/gnuconfig/config.guess)
 #
 ################################################################################
 
-ifeq ($(BR2_CCACHE),y)
-BASE_TARGETS += host-ccache
-endif
-
-ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y)
-BASE_TARGETS += toolchain-buildroot
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL),y)
-BASE_TARGETS += toolchain-external
-else ifeq ($(BR2_TOOLCHAIN_CTNG),y)
-BASE_TARGETS += toolchain-crosstool-ng
-endif
+BASE_TARGETS = toolchain
 
 TARGETS:=
 
@@ -265,21 +269,8 @@ HOST_DIR:=$(call qstrip,$(BR2_HOST_DIR))
 # locales to generate
 GENERATE_LOCALE=$(call qstrip,$(BR2_GENERATE_LOCALE))
 
-# stamp (dependency) files go here
-STAMP_DIR:=$(BASE_DIR)/stamps
-
-BINARIES_DIR:=$(BASE_DIR)/images
-TARGET_DIR:=$(BASE_DIR)/target
 TARGET_SKELETON=$(TOPDIR)/system/skeleton
 
-LEGAL_INFO_DIR=$(BASE_DIR)/legal-info
-REDIST_SOURCES_DIR=$(LEGAL_INFO_DIR)/sources
-LICENSE_FILES_DIR=$(LEGAL_INFO_DIR)/licenses
-LEGAL_MANIFEST_CSV=$(LEGAL_INFO_DIR)/manifest.csv
-LEGAL_LICENSES_TXT=$(LEGAL_INFO_DIR)/licenses.txt
-LEGAL_WARNINGS=$(LEGAL_INFO_DIR)/.warnings
-LEGAL_REPORT=$(LEGAL_INFO_DIR)/README
-
 # Location of a file giving a big fat warning that output/target
 # should not be used as the root filesystem.
 TARGET_DIR_WARNING_FILE=$(TARGET_DIR)/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
@@ -322,13 +313,8 @@ include support/dependencies/dependencies.mk
 # We also need the various per-package makefiles, which also add
 # each selected package to TARGETS if that package was selected
 # in the .config file.
-ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y)
-include toolchain/toolchain-buildroot.mk
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL),y)
-include toolchain/toolchain-external.mk
-else ifeq ($(BR2_TOOLCHAIN_CTNG),y)
-include toolchain/toolchain-crosstool-ng.mk
-endif
+include toolchain/helpers.mk
+include toolchain/*/*.mk
 
 # Include the package override file if one has been provided in the
 # configuration.
@@ -337,7 +323,7 @@ ifneq ($(PACKAGE_OVERRIDE_FILE),)
 -include $(PACKAGE_OVERRIDE_FILE)
 endif
 
-include package/*/*.mk
+include $(sort $(wildcard package/*/*.mk))
 
 include boot/common.mk
 include linux/linux.mk
@@ -395,16 +381,12 @@ $(TARGETS_ALL): __real_tgt_%: $(BASE_TARGETS) %
 dirs: $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
 	$(HOST_DIR) $(BINARIES_DIR) $(STAMP_DIR)
 
-$(BASE_TARGETS): dirs $(HOST_DIR)/usr/share/buildroot/toolchainfile.cmake
-
 $(BUILD_DIR)/buildroot-config/auto.conf: $(BUILDROOT_CONFIG)
 	$(MAKE) $(EXTRAMAKEARGS) HOSTCC="$(HOSTCC_NOCCACHE)" HOSTCXX="$(HOSTCXX_NOCCACHE)" silentoldconfig
 
 prepare: $(BUILD_DIR)/buildroot-config/auto.conf
 
-toolchain: prepare dirs dependencies $(BASE_TARGETS)
-
-world: toolchain $(TARGETS_ALL)
+world: $(BASE_TARGETS) $(TARGETS_ALL)
 
 .PHONY: all world toolchain dirs clean distclean source outputmakefile \
 	legal-info legal-info-prepare legal-info-clean printvars \
@@ -422,10 +404,20 @@ world: toolchain $(TARGETS_ALL)
 $(BUILD_DIR) $(HOST_DIR) $(BINARIES_DIR) $(STAMP_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR):
 	@mkdir -p $@
 
+# We make a symlink lib32->lib or lib64->lib as appropriate
+# MIPS64/n32 requires lib32 even though it's a 64-bit arch.
+ifeq ($(BR2_ARCH_IS_64)$(BR2_MIPS_NABI32),y)
+LIB_SYMLINK = lib64
+else
+LIB_SYMLINK = lib32
+endif
+
 $(STAGING_DIR):
 	@mkdir -p $(STAGING_DIR)/bin
 	@mkdir -p $(STAGING_DIR)/lib
+	@ln -snf lib $(STAGING_DIR)/$(LIB_SYMLINK)
 	@mkdir -p $(STAGING_DIR)/usr/lib
+	@ln -snf lib $(STAGING_DIR)/usr/$(LIB_SYMLINK)
 	@mkdir -p $(STAGING_DIR)/usr/include
 	@mkdir -p $(STAGING_DIR)/usr/bin
 	@ln -snf $(STAGING_DIR) $(BASE_DIR)/staging
@@ -434,13 +426,19 @@ ifeq ($(BR2_ROOTFS_SKELETON_CUSTOM),y)
 TARGET_SKELETON=$(BR2_ROOTFS_SKELETON_CUSTOM_PATH)
 endif
 
+RSYNC_VCS_EXCLUSIONS = \
+	--exclude .svn --exclude .git --exclude .hg --exclude .bzr \
+	--exclude CVS
+
 $(BUILD_DIR)/.root:
 	mkdir -p $(TARGET_DIR)
-	rsync -a \
-		--exclude .empty --exclude .svn --exclude .git \
-		--exclude .hg --exclude=CVS --exclude '*~' \
+	rsync -a $(RSYNC_VCS_EXCLUSIONS) \
+		--exclude .empty --exclude '*~' \
 		$(TARGET_SKELETON)/ $(TARGET_DIR)/
 	cp support/misc/target-dir-warning.txt $(TARGET_DIR_WARNING_FILE)
+	@ln -snf lib $(TARGET_DIR)/$(LIB_SYMLINK)
+	@mkdir -p $(TARGET_DIR)/usr
+	@ln -snf lib $(TARGET_DIR)/usr/$(LIB_SYMLINK)
 	touch $@
 
 $(TARGET_DIR): $(BUILD_DIR)/.root
@@ -476,15 +474,16 @@ ifeq ($(BR2_PACKAGE_PYTHON_PYC_ONLY),y)
 	find $(TARGET_DIR)/usr/lib/ -name '*.py' -print0 | xargs -0 rm -f
 endif
 	$(STRIP_FIND_CMD) | xargs $(STRIPCMD) 2>/dev/null || true
-	find $(TARGET_DIR)/lib/modules -type f -name '*.ko' | \
-		xargs -r $(KSTRIPCMD) || true
+	if test -d $(TARGET_DIR)/lib/modules; then \
+		find $(TARGET_DIR)/lib/modules -type f -name '*.ko' | \
+		xargs -r $(KSTRIPCMD); fi
 
 # See http://sourceware.org/gdb/wiki/FAQ, "GDB does not see any threads
 # besides the one in which crash occurred; or SIGTRAP kills my program when
 # I set a breakpoint"
 ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y)
 	find $(TARGET_DIR)/lib -type f -name 'libpthread*.so*' | \
-		xargs $(STRIPCMD) $(STRIP_STRIP_DEBUG) || true
+		xargs -r $(STRIPCMD) $(STRIP_STRIP_DEBUG)
 endif
 
 	mkdir -p $(TARGET_DIR)/etc
@@ -508,9 +507,8 @@ endif
 
 	@$(foreach d, $(call qstrip,$(BR2_ROOTFS_OVERLAY)), \
 		$(call MESSAGE,"Copying overlay $(d)"); \
-		rsync -a \
-			--exclude .empty --exclude .svn --exclude .git \
-			--exclude .hg --exclude=CVS --exclude '*~' \
+		rsync -a $(RSYNC_VCS_EXCLUSIONS) \
+			--exclude .empty --exclude '*~' \
 			$(d)/ $(TARGET_DIR)$(sep))
 
 	@$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_BUILD_SCRIPT)), \
@@ -544,7 +542,7 @@ target-generatelocales: host-localedef
 	$(Q)mkdir -p $(TARGET_DIR)/usr/lib/locale/
 	$(Q)for locale in $(GENERATE_LOCALE) ; do \
 		inputfile=`echo $${locale} | cut -f1 -d'.'` ; \
-		charmap=`echo $${locale} | cut -f2 -d'.'` ; \
+		charmap=`echo $${locale} | cut -f2 -d'.' -s` ; \
 		if test -z "$${charmap}" ; then \
 			charmap="UTF-8" ; \
 		fi ; \
@@ -552,7 +550,7 @@ target-generatelocales: host-localedef
 		I18NPATH=$(STAGING_DIR)/usr/share/i18n:/usr/share/i18n \
 		$(HOST_DIR)/usr/bin/localedef \
 			--prefix=$(TARGET_DIR) \
-			--`echo $(BR2_ENDIAN) | tr [A-Z] [a-z]`-endian \
+			--$(call LOWERCASE,$(BR2_ENDIAN))-endian \
 			-i $${inputfile} -f $${charmap} \
 			$${locale} ; \
 	done
@@ -740,7 +738,7 @@ printvars:
 		$(info $V=$($V) ($(value $V)))))
 
 clean:
-	rm -rf $(STAGING_DIR) $(TARGET_DIR) $(BINARIES_DIR) $(HOST_DIR) \
+	rm -rf $(TARGET_DIR) $(BINARIES_DIR) $(HOST_DIR) \
 		$(STAMP_DIR) $(BUILD_DIR) $(BASE_DIR)/staging \
 		$(LEGAL_INFO_DIR)
 
@@ -791,20 +789,17 @@ endif
 ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y)
 	@echo '  uclibc-menuconfig      - Run uClibc menuconfig'
 endif
-ifeq ($(BR2_TOOLCHAIN_CTNG),y)
-	@echo '  ctng-menuconfig        - Run crosstool-NG menuconfig'
-endif
 ifeq ($(BR2_TARGET_BAREBOX),y)
 	@echo '  barebox-menuconfig     - Run barebox menuconfig'
 	@echo '  barebox-savedefconfig  - Run barebox savedefconfig'
 endif
 	@echo
 	@echo 'Documentation:'
-	@echo '  manual                 - build manual in HTML, split HTML, PDF and txt'
+	@echo '  manual                 - build manual in all formats'
 	@echo '  manual-html            - build manual in HTML'
 	@echo '  manual-split-html      - build manual in split HTML'
 	@echo '  manual-pdf             - build manual in PDF'
-	@echo '  manual-txt             - build manual in txt'
+	@echo '  manual-text            - build manual in text'
 	@echo '  manual-epub            - build manual in ePub'
 	@echo
 	@echo 'Miscellaneous:'
@@ -827,8 +822,8 @@ release: OUT=buildroot-$(BR2_VERSION)
 # Create release tarballs. We need to fiddle a bit to add the generated
 # documentation to the git output
 release:
-	git archive --format=tar --prefix=$(OUT)/ master > $(OUT).tar
-	$(MAKE) O=$(OUT) manual-html manual-txt manual-pdf
+	git archive --format=tar --prefix=$(OUT)/ HEAD > $(OUT).tar
+	$(MAKE) O=$(OUT) manual-html manual-text manual-pdf
 	tar rf $(OUT).tar $(OUT)
 	gzip -9 -c < $(OUT).tar > $(OUT).tar.gz
 	bzip2 -9 -c < $(OUT).tar > $(OUT).tar.bz2

arch/Config.in

@@ -1,6 +1,11 @@
+menu "Target options"
+
 config BR2_ARCH_IS_64
 	bool
 
+config BR2_KERNEL_64_USERLAND_32
+	bool
+
 config BR2_SOFT_FLOAT
 	bool
 
@@ -124,6 +129,13 @@ config BR2_mips64el
 	  http://www.mips.com/
 	  http://en.wikipedia.org/wiki/MIPS_Technologies
 
+config BR2_nios2
+	bool "Nios II"
+	help
+	  Nios II is a soft core processor from Altera Corporation.
+	  http://www.altera.com/
+	  http://en.wikipedia.org/wiki/Nios_II
+
 config BR2_powerpc
 	bool "PowerPC"
 	help
@@ -305,6 +317,10 @@ if BR2_mips || BR2_mips64 || BR2_mipsel || BR2_mips64el
 source "arch/Config.in.mips"
 endif
 
+if BR2_nios2
+source "arch/Config.in.nios2"
+endif
+
 if BR2_powerpc
 source "arch/Config.in.powerpc"
 endif
@@ -324,3 +340,5 @@ endif
 if BR2_xtensa
 source "arch/Config.in.xtensa"
 endif
+
+endmenu # Target options

arch/Config.in.avr32

@@ -3,3 +3,6 @@ config BR2_ARCH
 
 config BR2_ENDIAN
 	default "BIG"
+
+config BR2_GCC_TARGET_ARCH
+	default "ap"

arch/Config.in.mips

@@ -1,8 +1,7 @@
 choice
 	prompt "Target Architecture Variant"
 	depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
-	default BR2_mips_3 if BR2_mips
-	default BR2_mips_1 if BR2_mipsel
+	default BR2_mips_32 if BR2_mips || BR2_mipsel
 	default BR2_mips_64 if BR2_mips64 || BR2_mips64el
 	help
 	  Specific CPU variant to use
@@ -12,14 +11,16 @@ choice
 
 config BR2_mips_1
 	bool "mips I (generic)"
-	depends on !BR2_ARCH_IS_64
+	depends on !BR2_ARCH_IS_64 && BR2_DEPRECATED
 config BR2_mips_2
 	bool "mips II"
-	depends on !BR2_ARCH_IS_64
+	depends on !BR2_ARCH_IS_64 && BR2_DEPRECATED
 config BR2_mips_3
 	bool "mips III"
+	depends on BR2_DEPRECATED
 config BR2_mips_4
 	bool "mips IV"
+	depends on BR2_DEPRECATED
 config BR2_mips_32
 	bool "mips 32"
 	depends on !BR2_ARCH_IS_64
@@ -47,6 +48,7 @@ config BR2_MIPS_OABI32
 config BR2_MIPS_NABI32
 	bool "n32"
 	depends on BR2_ARCH_IS_64
+	select BR2_KERNEL_64_USERLAND_32
 config BR2_MIPS_NABI64
 	bool "n64"
 	depends on BR2_ARCH_IS_64
@@ -72,7 +74,7 @@ config BR2_ENDIAN
 	default "LITTLE"	if BR2_mipsel || BR2_mips64el
 	default "BIG" 	    	if BR2_mips || BR2_mips64
 
-config BR2_GCC_TARGET_TUNE
+config BR2_GCC_TARGET_ARCH
 	default "mips1"		if BR2_mips_1
 	default "mips2"		if BR2_mips_2
 	default "mips3"		if BR2_mips_3

arch/Config.in.nios2

@@ -0,0 +1,5 @@
+config BR2_ARCH
+	default "nios2"
+
+config BR2_ENDIAN
+	default "LITTLE"

board/boundarydevices/nitrogen6x/post-build.sh

@@ -1,18 +1,18 @@
 #!/bin/sh
 # post-build fixups
-# for furthe details, see
-# http://boundarydevices.com/u-boot-conventions-for-i-mx6-nitrogen6x-and-sabrelite/
+# for further details, see
+#
+#  http://boundarydevices.com/u-boot-on-i-mx6/
+#
 
-TARGET_DIR=$1
-IMAGES_DIR=$1/../images
 BOARD_DIR="$(dirname $0)"
 
 # bd u-boot looks for bootscript here
-cp $BOARD_DIR/6q_bootscript $TARGET_DIR
+cp $BOARD_DIR/6x_bootscript $TARGET_DIR
 
 # u-boot / update script for bd upgradeu command
-if [ -e $IMAGES_DIR/u-boot.bin ];
+if [ -e $BINARIES_DIR/u-boot.imx ];
 then
-    cp $IMAGES_DIR/u-boot.bin $TARGET_DIR
-    cp $BOARD_DIR/6q_upgrade $TARGET_DIR
+    cp $BINARIES_DIR/u-boot.imx $TARGET_DIR
+    cp $BOARD_DIR/6x_upgrade $TARGET_DIR
 fi

board/cubietech/cubieboard/linux-cubieboard2.config

@@ -0,0 +1,749 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_RCU_FAST_NO_HZ=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+CONFIG_CGROUP_MEM_RES_CTLR_KMEM=y
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PERF_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SGI_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_ARCH_SUN7I=y
+CONFIG_SUNXI_SCALING_MIN=408
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SMP=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_NR_CPUS=2
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_HIGHMEM=y
+CONFIG_COMPACTION=y
+CONFIG_KSM=y
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/mmc0p1 rw init=/init loglevel=8"
+CONFIG_KEXEC=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_DEFAULT_GOV_FANTASY=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_INTERACTIVE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_FREQ_USR_EVNT_NOTIFY=y
+CONFIG_CPU_FREQ_DVFS=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_FIB_TRIE_STATS=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_WESTWOOD=y
+CONFIG_TCP_CONG_HTCP=y
+CONFIG_TCP_CONG_HSTCP=y
+CONFIG_TCP_CONG_HYBLA=y
+CONFIG_TCP_CONG_SCALABLE=y
+CONFIG_TCP_CONG_LP=y
+CONFIG_TCP_CONG_VENO=y
+CONFIG_TCP_CONG_YEAH=y
+CONFIG_TCP_CONG_ILLINOIS=y
+CONFIG_TCP_MD5SIG=y
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+# CONFIG_ANDROID_PARANOID_NETWORK is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETWORK_PHY_TIMESTAMPING=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMEOUT=y
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA2=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_PE_SIP=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_REJECT_SKERR=y
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_REJECT_SKERR=y
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_L2TP=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_BATMAN_ADV=m
+CONFIG_OPENVSWITCH=m
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_NET_PKTGEN=m
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+CONFIG_IRTTY_SIR=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_AF_RXRPC=m
+CONFIG_RXKAD=m
+CONFIG_CFG80211=y
+CONFIG_CFG80211_DEVELOPER_WARNINGS=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_CFG80211_ALLOW_RECONNECT=y
+CONFIG_MAC80211=m
+CONFIG_MAC80211_MESH=y
+CONFIG_WIMAX=m
+CONFIG_RFKILL=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_SUNXI_DBGREG=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SW_SATA_AHCI_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_BONDING=m
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_SUNXI_EMAC=y
+CONFIG_PHYLIB=y
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPPOLAC=m
+CONFIG_PPPOPNS=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_USB_IPHETH=m
+CONFIG_ATH_COMMON=m
+CONFIG_ATH9K=m
+CONFIG_RTL8192CU=m
+CONFIG_RTL8192CU_SW=m
+CONFIG_RTL8188EU=m
+CONFIG_RTXX7X_SW=m
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_KEYRESET=y
+CONFIG_KEYBOARD_HV2605_KEYBOARD=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_GT801=m
+CONFIG_TOUCHSCREEN_GT811=m
+CONFIG_TOUCHSCREEN_GT818=m
+CONFIG_TOUCHSCREEN_FT5X_TS=m
+CONFIG_TOUCHSCREEN_ZT8031=m
+CONFIG_GSENSOR=y
+CONFIG_SENSORS_BMA250=m
+CONFIG_MEMSIC_ECOMPASS=m
+CONFIG_SENSORS_MXC622X=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_SUNXI=m
+CONFIG_POWER_SUPPLY=y
+CONFIG_AW_AXP=y
+# CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+# CONFIG_MEDIA_TUNER_MAX2165 is not set
+# CONFIG_MEDIA_TUNER_TDA18218 is not set
+# CONFIG_MEDIA_TUNER_TDA18212 is not set
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_ET61X251=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+# CONFIG_VIDEO_CSI_SUN4I is not set
+CONFIG_RADIO_SI470X=y
+CONFIG_USB_SI470X=m
+CONFIG_I2C_SI470X=m
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_KEENE=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_WL1273=m
+CONFIG_AUDIO_ENGINE=y
+CONFIG_PA_CONTROL=y
+CONFIG_DRM=m
+CONFIG_DRM_MALI=m
+CONFIG_DRM_UDL=m
+CONFIG_MALI=m
+CONFIG_MALI400_DEBUG=y
+CONFIG_MALI400_GPU_UTILIZATION=y
+CONFIG_FB=y
+CONFIG_FB_SUNXI=y
+CONFIG_FB_SUNXI_LCD=y
+CONFIG_FB_SUNXI_HDMI=y
+CONFIG_HDMI_CEC=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_ALOOP=m
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_SOC=y
+CONFIG_SND_SUNXI_SOC_SPDIF=y
+CONFIG_HIDRAW=y
+CONFIG_UHID=y
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_HID_KYE=y
+CONFIG_HID_LOGITECH_DJ=y
+CONFIG_LOGITECH_FF=y
+# CONFIG_LOGIWHEELS_FF is not set
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_GADGET=y
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+CONFIG_MMC=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_USHC=y
+CONFIG_MMC_SUNXI_POWER_CONTROL=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SUNXI=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SUN4I=y
+CONFIG_STAGING=y
+CONFIG_ANDROID=y
+CONFIG_ANDROID_BINDER_IPC=y
+CONFIG_ANDROID_LOGGER=y
+CONFIG_ANDROID_RAM_CONSOLE=y
+CONFIG_ANDROID_LOW_MEMORY_KILLER=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_REISERFS_FS=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QFMT_V2=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_HFS_FS=y
+CONFIG_HFSPLUS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="y"
+CONFIG_ROOT_NFS=y
+CONFIG_NFS_USE_LEGACY_DNS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_FAULT_INJECTION=y
+CONFIG_CIFS=y
+CONFIG_CIFS_DFS_UPCALL=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_LIST=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+# CONFIG_FTRACE is not set
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_LL=y
+CONFIG_SECURITYFS=y
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_LIBCRC32C=y

board/cubietech/cubieboard/mkcubiecard.sh

@@ -14,6 +14,7 @@
 
 IMAGES_DIR=$1
 SPL_IMG=$IMAGES_DIR/sunxi-spl.bin
+SPL_UBOOT=$IMAGES_DIR/u-boot-sunxi-with-spl.bin
 UBOOT_IMG=$IMAGES_DIR/u-boot.bin
 UIMAGE=$IMAGES_DIR/uImage
 BIN_BOARD_FILE=$IMAGES_DIR/script.bin
@@ -32,7 +33,7 @@ if [ $EUID -ne 0 ]; then
 	exit 1
 fi
 
-if [ ! -f $SPL_IMG ] ||
+if [ ! -f $SPL_IMG  -a ! -f $SPL_UBOOT ] ||
    [ ! -f $UBOOT_IMG ] ||
    [ ! -f $UIMAGE ] ||
    [ ! -f $BIN_BOARD_FILE ] ||
@@ -113,7 +114,11 @@ umount $D2
 rm -fr $P1
 rm -fr $P2
 
-# write SPL
-dd if=$SPL_IMG of=$DRIVE bs=1024 seek=8
-# write mele u-boot
-dd if=$UBOOT_IMG of=$DRIVE bs=1024 seek=32
+if [ -e $SPL_UBOOT ]; then
+	dd if=$SPL_UBOOT of=$DRIVE bs=1024 seek=8
+else
+	# write SPL
+	dd if=$SPL_IMG of=$DRIVE bs=1024 seek=8
+	# write mele u-boot
+	dd if=$UBOOT_IMG of=$DRIVE bs=1024 seek=32
+fi

board/cubietech/cubieboard/readme.txt

@@ -1,4 +1,4 @@
-cubieboard
+cubieboard and cubieboard2
 
 -----
 Intro
@@ -13,8 +13,10 @@ For more information, please see http://linux-sunxi.org/FirstSteps
 How to build it
 ---------------
 
-You need to use the cubieboard_defconfig, to do so:
+You need to use the cubieboard_defconfig or cubieboard2_defconfig, to do so:
  * make cubieboard_defconfig
+or
+ * make cubieboard2_defconfig
 
 And to compile:
  * make
@@ -31,6 +33,7 @@ After building, you should obtain this tree:
     +-- script.bin
     +-- sunxi-spl.bin
     +-- u-boot.bin
+    +-- u-boot-sunxi-with-spl.bin (optional)
     `-- uImage
 
 --------------------------

board/freescale/mpc8315erdb/readme.txt

@@ -6,7 +6,7 @@ It won't work for NOR and will brick that bootloader!
 Also don't go playing around with different U-boot versions or flash targets
 unless you've got the necessary hardware and/or know-how to unbrick your kit.
 
-2013.04 is known good for NAND.
+2013.10 is known good for NAND.
 ******************** WARNING ********************
 
 You'll need to program the files created by buildroot into the flash.

board/freescale/p1010rdb/readme.txt

@@ -6,7 +6,7 @@ It won't work for NAND or SPI and will brick those bootloaders!
 Also don't go playing around with different U-boot versions or flash targets
 unless you've got the necessary hardware and/or know-how to unbrick your kit.
 
-2013.04 is known good for NOR.
+2013.10 is known good for NOR.
 ******************** WARNING ********************
 
 You'll need to program the files created by buildroot into the flash.

board/olimex/imx233_olinuxino/linux-01-mmc-mxs-mmc-add-cd-inverted-property.patch

@@ -1,47 +0,0 @@
-From 4c0c9be05004d1eb674b7586216b3d93cc04531c Mon Sep 17 00:00:00 2001
-From: Marc Kleine-Budde <mkl@pengutronix.de>
-Date: Wed, 10 Apr 2013 11:13:43 +0200
-Subject: [PATCH 1/3] mmc: mxs-mmc: add cd-inverted property
-
-The card-detect GPIO is inverted on some boards. Handle such case.
-
-Acked-by: Shawn Guo <shawn.guo@linaro.org>
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-Signed-off-by: Chris Ball <cjb@laptop.org>
----
- drivers/mmc/host/mxs-mmc.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
-diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
-index 4efe302..0cdf1f6 100644
---- a/drivers/mmc/host/mxs-mmc.c
-+++ b/drivers/mmc/host/mxs-mmc.c
-@@ -72,6 +72,7 @@ struct mxs_mmc_host {
- 	int				sdio_irq_en;
- 	int				wp_gpio;
- 	bool				wp_inverted;
-+	bool				cd_inverted;
- };
-
- static int mxs_mmc_get_ro(struct mmc_host *mmc)
-@@ -96,7 +97,7 @@ static int mxs_mmc_get_cd(struct mmc_host *mmc)
- 	struct mxs_ssp *ssp = &host->ssp;
-
- 	return !(readl(ssp->base + HW_SSP_STATUS(ssp)) &
--		 BM_SSP_STATUS_CARD_DETECT);
-+		 BM_SSP_STATUS_CARD_DETECT)) ^ host->cd_inverted;
- }
-
- static void mxs_mmc_reset(struct mxs_mmc_host *host)
-@@ -691,6 +692,8 @@ static int mxs_mmc_probe(struct platform_device *pdev)
- 	if (flags & OF_GPIO_ACTIVE_LOW)
- 		host->wp_inverted = 1;
-
-+	host->cd_inverted = of_property_read_bool(np, "cd-inverted");
-+
- 	mmc->f_min = 400000;
- 	mmc->f_max = 288000000;
- 	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
---
-1.8.1.5
-

board/olimex/imx233_olinuxino/linux-02-mmc-mxs-mmc-add-non-removable-property.patch

@@ -1,53 +0,0 @@
-From 5086e5f41fd107539911edf62f2d202753ed1980 Mon Sep 17 00:00:00 2001
-From: Marc Kleine-Budde <mkl@pengutronix.de>
-Date: Wed, 10 Apr 2013 11:13:44 +0200
-Subject: [PATCH 2/3] mmc: mxs-mmc: add non-removable property
-
-Some boards have non removable cards like eMMC. Handle such case.
-
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-Acked-by: Shawn Guo <shawn.guo@linaro.org>
-Signed-off-by: Chris Ball <cjb@laptop.org>
----
- drivers/mmc/host/mxs-mmc.c | 10 +++++++---
- 1 file changed, 7 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
-index 0cdf1f6..c231881 100644
---- a/drivers/mmc/host/mxs-mmc.c
-+++ b/drivers/mmc/host/mxs-mmc.c
-@@ -73,6 +73,7 @@ struct mxs_mmc_host {
- 	int				wp_gpio;
- 	bool				wp_inverted;
- 	bool				cd_inverted;
-+	bool				non_removable;
- };
-
- static int mxs_mmc_get_ro(struct mmc_host *mmc)
-@@ -96,8 +97,9 @@ static int mxs_mmc_get_cd(struct mmc_host *mmc)
- 	struct mxs_mmc_host *host = mmc_priv(mmc);
- 	struct mxs_ssp *ssp = &host->ssp;
-
--	return !(readl(ssp->base + HW_SSP_STATUS(ssp)) &
--		 BM_SSP_STATUS_CARD_DETECT)) ^ host->cd_inverted;
-+	return host->non_removable ||
-+		!(readl(ssp->base + HW_SSP_STATUS(ssp)) &
-+		  BM_SSP_STATUS_CARD_DETECT) ^ host->cd_inverted;
- }
-
- static void mxs_mmc_reset(struct mxs_mmc_host *host)
-@@ -687,8 +689,10 @@ static int mxs_mmc_probe(struct platform_device *pdev)
- 		mmc->caps |= MMC_CAP_4_BIT_DATA;
- 	else if (bus_width == 8)
- 		mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
-+	host->non_removable = of_property_read_bool(np, "non-removable");
-+	if (host->non_removable)
-+		mmc->caps |= MMC_CAP_NONREMOVABLE;
- 	host->wp_gpio = of_get_named_gpio_flags(np, "wp-gpios", 0, &flags);
--
- 	if (flags & OF_GPIO_ACTIVE_LOW)
- 		host->wp_inverted = 1;
-
---
-1.8.1.5
-

board/olimex/imx233_olinuxino/linux-03-mmc-mxs-mmc-add-broken-cd-property.patch

@@ -1,50 +0,0 @@
-From 1d53196a0d604fcf636203fac21e944b6a9cf275 Mon Sep 17 00:00:00 2001
-From: Hector Palacios <hector.palacios@digi.com>
-Date: Wed, 10 Apr 2013 11:13:45 +0200
-Subject: [PATCH 3/3] mmc: mxs-mmc: add broken-cd property
-
-According to bindings documentation for mmc, the property 'broken-cd'
-can be used to indicate card-detection is not available and polling
-must be used instead. This patch retrieves this property
-and sets a custom flag. On the get_cd() hook, it returns 1 if
-the flag is set, to always assume the card is present.
-
-Signed-off-by: Hector Palacios <hector.palacios@digi.com>
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-Signed-off-by: Chris Ball <cjb@laptop.org>
----
- drivers/mmc/host/mxs-mmc.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
-diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
-index c231881..146a53b 100644
---- a/drivers/mmc/host/mxs-mmc.c
-+++ b/drivers/mmc/host/mxs-mmc.c
-@@ -73,6 +73,7 @@ struct mxs_mmc_host {
- 	int				wp_gpio;
- 	bool				wp_inverted;
- 	bool				cd_inverted;
-+	bool				broken_cd;
- 	bool				non_removable;
- };
-
-@@ -97,7 +98,7 @@ static int mxs_mmc_get_cd(struct mmc_host *mmc)
- 	struct mxs_mmc_host *host = mmc_priv(mmc);
- 	struct mxs_ssp *ssp = &host->ssp;
-
--	return host->non_removable ||
-+	return host->non_removable || host->broken_cd ||
- 		!(readl(ssp->base + HW_SSP_STATUS(ssp)) &
- 		  BM_SSP_STATUS_CARD_DETECT) ^ host->cd_inverted;
- }
-@@ -689,6 +690,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
- 		mmc->caps |= MMC_CAP_4_BIT_DATA;
- 	else if (bus_width == 8)
- 		mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
-+	host->broken_cd = of_property_read_bool(np, "broken-cd");
- 	host->non_removable = of_property_read_bool(np, "non-removable");
- 	if (host->non_removable)
- 		mmc->caps |= MMC_CAP_NONREMOVABLE;
---
-1.8.1.5
-

board/olimex/imx233_olinuxino/linux-04-ARM-dts-imx23-olinuxino-mark-sdcard-cd-as-broken.patch

@@ -1,28 +0,0 @@
-From 1897fda94190498573f9d1b72bc6b7b58c720957 Mon Sep 17 00:00:00 2001
-From: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
-Date: Sat, 6 Apr 2013 10:42:10 -0300
-Subject: [PATCH 1/1] ARM: dts: imx23-olinuxino: mark sdcard cd as broken
-
-The imx23-olinuxino sdcard doesn't have card detect.
-
-Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/boot/dts/imx23-olinuxino.dts | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
-index e7484e4..d107c4a 100644
---- a/arch/arm/boot/dts/imx23-olinuxino.dts
-+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
-@@ -29,6 +29,7 @@
- 				pinctrl-names = "default";
- 				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
- 				bus-width = <4>;
-+				broken-cd;
- 				status = "okay";
- 			};
-
---
-1.8.1.5
-

board/olimex/imx233_olinuxino/linux-3.12.config

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -12,6 +11,7 @@ CONFIG_IKCONFIG_PROC=y
 # CONFIG_IPC_NS is not set
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
+CONFIG_RELAY=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_MODULES=y
@@ -22,15 +22,14 @@ CONFIG_MODVERSIONS=y
 CONFIG_BLK_DEV_INTEGRITY=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MXS=y
-CONFIG_MACH_MXS_DT=y
-CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMB is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
-CONFIG_ATAGS=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait"
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_AUTO_ZRELADDR=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -44,17 +43,14 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-CONFIG_CAN_FLEXCAN=m
-# CONFIG_WIRELESS is not set
+CONFIG_CFG80211=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_MAC80211=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_M25P80=y
@@ -65,23 +61,30 @@ CONFIG_MTD_NAND_GPMI_NAND=y
 CONFIG_MTD_UBI=y
 # CONFIG_BLK_DEV is not set
 CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_93CX6=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
-CONFIG_ENC28J60=y
+# CONFIG_ETHERNET is not set
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC95XX=y
-CONFIG_SMSC_PHY=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_REALTEK_PHY=y
-CONFIG_MICREL_PHY=y
-# CONFIG_WLAN is not set
+CONFIG_RTL8187=m
+CONFIG_ATH_CARDS=m
+CONFIG_ATH9K_HTC=m
+CONFIG_RT2X00=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_RT55XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RTL_CARDS=m
+CONFIG_RTL8192CU=m
+# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_ZD1211RW=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_TSC2007=m
 # CONFIG_SERIO is not set
 CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
@@ -98,9 +101,11 @@ CONFIG_I2C_MXS=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=m
 CONFIG_SPI_MXS=y
-CONFIG_DEBUG_GPIO=y
+CONFIG_PTP_1588_CLOCK=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_STMP3XXX_RTC_WATCHDOG=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_FB=y
@@ -110,79 +115,63 @@ CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
+CONFIG_SND_HRTIMER=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
-CONFIG_SND_MXS_SOC=y
-CONFIG_SND_SOC_MXS_SGTL5000=y
+CONFIG_SND_MXS_SOC_BUILTIN=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
 CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_STORAGE=y
+CONFIG_USB_PHY=y
 CONFIG_USB_MXS_PHY=y
 CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_MMC_MXS=y
-CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=m
 CONFIG_RTC_DRV_STMP=y
 CONFIG_DMADEVICES=y
 CONFIG_MXS_DMA=y
 CONFIG_STAGING=y
 CONFIG_MXS_LRADC=y
-CONFIG_IIO_SYSFS_TRIGGER=y
-CONFIG_COMMON_CLK_DEBUG=y
 CONFIG_IIO=y
+CONFIG_IIO_SYSFS_TRIGGER=y
 CONFIG_PWM=y
 CONFIG_PWM_MXS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_FSCACHE=m
-CONFIG_FSCACHE_STATS=y
-CONFIG_CACHEFILES=m
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
 CONFIG_PRINTK_TIME=y
 CONFIG_FRAME_WARN=2048
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOCKUP_DETECTOR=y
-CONFIG_TIMER_STATS=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_DEBUG_INFO=y
-CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_DEBUG_FS=y
 CONFIG_STRICT_DEVMEM=y
 CONFIG_DEBUG_USER=y
+CONFIG_KEYS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_ITU_T=m
+CONFIG_CRYPTO_DEV_DCP=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC7=m
+CONFIG_FONTS=y

board/olimex/imx233_olinuxino/mxs-bootlets/mxs-bootlets-01-olinuxino.patch

@@ -65,9 +65,9 @@ diff -Nura imx-bootlets-src-10.12.01/linux_prep/cmdlines/imx23_olinuxino_dev.txt
 --- imx-bootlets-src-10.12.01/linux_prep/cmdlines/imx23_olinuxino_dev.txt	1969-12-31 21:00:00.000000000 -0300
 +++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/cmdlines/imx23_olinuxino_dev.txt	2013-05-17 15:07:49.663496106 -0300
 @@ -0,0 +1,3 @@
-+noinitrd console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait ssp1=mmc
-+noinitrd console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait ssp1=mmc
-+noinitrd console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait ssp1=mmc
++console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait
++console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait
++console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait
 diff -Nura imx-bootlets-src-10.12.01/linux_prep/core/setup.c imx-bootlets-src-10.12.01-olinuxino/linux_prep/core/setup.c
 --- imx-bootlets-src-10.12.01/linux_prep/core/setup.c	2010-11-04 04:35:38.000000000 -0300
 +++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/core/setup.c	2013-05-17 15:08:39.246114205 -0300

board/olimex/imx233_olinuxino/readme.txt

@@ -1,5 +1,7 @@
-This configuration is intended as a base image, it doesn't have support
-for things like WiFi, either in the kernel or packages.
+This configuration is intended as a base image.
+It includes kernel and firmware support for the common USB WiFi hardware.
+Packages for WiFi support are up to the user, you'll probably want
+one or more of: hostapd, iw, wireless_tools and/or wpa_supplicant.
 
 It also pulls up the console on the serial port, not on TV output.
 

board/qemu/arm-nuri/readme.txt

@@ -7,4 +7,4 @@ graphical window is the framebuffer.
 
 Startup time is slow because of the SMP CPU emulation so be patient.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.1

board/qemu/arm-versatile/readme.txt

@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.1

board/qemu/arm-vexpress/readme.txt

@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.1

board/qemu/microblazebe-mmu/readme.txt

@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.1

board/qemu/microblazeel-mmu/readme.txt

@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.1

board/qemu/mips-malta/readme.txt

@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.1

board/qemu/mips64-malta/readme.txt

@@ -8,4 +8,4 @@ enabled.
 
 This configuration is known to be flaky.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.1

board/qemu/mipsel-malta/readme.txt

@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.1

board/qemu/powerpc-g3beige/readme.txt

@@ -1,8 +1,8 @@
 Run the emulation with:
 
-  qemu-system-ppc -M g3beige -kernel output/images/vmlinux -hda output/images/rootfs.ext2 -append "console=ttyS0 root=/dev/hdc" -serial stdio -net nic,model=rtl8139 -net user
+  qemu-system-ppc -M g3beige -kernel output/images/vmlinux -hda output/images/rootfs.ext2 -append "console=ttyS0 root=/dev/hda" -serial stdio -net nic,model=rtl8139 -net user
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.1

board/qemu/powerpc-mpc8544ds/readme.txt

@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.1

board/qemu/powerpc-virtex-ml507/readme.txt

@@ -5,4 +5,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.1

board/qemu/sh4-r2d/readme.txt

@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.1

board/qemu/sparc-ss10/readme.txt

@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.1

board/qemu/x86/readme.txt

@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the graphical window.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.1

board/qemu/x86_64/readme.txt

@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the graphical window.
 
-Tested with QEMU 1.5.2
+Tested with QEMU 1.6.1

board/raspberrypi/readme.txt

@@ -4,124 +4,125 @@ Intro
 =====
 
 To be able to use your RaspberryPi board with the images generated by
-Buildroot, you have a prior choice to make, will you use:
-    - Volatile rootfs in RAM (The rootfs is an initramfs) or
-    - Persistent rootfs on the SDCard
+Buildroot, you have to choose whether you will use:
+
+    * Volatile rootfs in RAM (the rootfs is an initramfs) or
+    * Persistent rootfs on the SDCard
 
 Also, a good source of information is http://elinux.org/R-Pi_Hub
 
-Volatile rootfs
+How to build it
 ===============
 
-How to build it
----------------
+Configure Buildroot
+-------------------
 
-You need to use the rpi_defconfig, to do so:
- * make rpi_defconfig
+The raspberrypi_defconfig configuration is a minimal configuration with
+all that is required to bring the Raspberry Pi. You should base your
+work on this defconfig:
 
-Then, you need to select the kind of images you want:
- * make menuconfig
- * Select "Filesystem images"
- * Select "initial RAM filesystem linked into linux kernel"
+  $ make raspberrypi_defconfig
 
-What is generated
------------------
+If you want to use a persistent rootfs, skip to "Build the rootfs", below.
+
+For a volatile rootfs, you have to slightly adjust the configuration:
+
+  $ make menuconfig
+    * Select "Filesystem images"
+    * Select "initial RAM filesystem linked into linux kernel"
+
+You may also deselect "tar the root filesystem".
+
+Build the rootfs
+----------------
+
+Note: you will need to have access to the network, since Buildroot will
+download the packages' sources.
+
+You may now build your rootfs with:
+
+  $ make
+
+(This may take a while; consider getting yourself a coffee ;-) )
+
+Result of the build
+-------------------
 
 After building, you should obtain this tree:
 
     output/images/
     +-- rootfs.tar
     +-- rpi-firmware
-    |   +-- bootcode.bin
-    |   +-- config.txt
-    |   +-- fixup_cd.dat
-    |   +-- fixup.dat
-    |   +-- start_cd.elf
-    |   `-- start.elf
+    |   +-- bootcode.bin
+    |   +-- config.txt
+    |   +-- fixup_cd.dat
+    |   +-- fixup.dat
+    |   +-- start_cd.elf
+    |   `-- start.elf
     `-- zImage
 
-Note : rootfs.tar will only be there if you kept "tar the root filesystem"
-option selected in "Filesystem images".
+Note for Volatile: rootfs.tar will only be there if you kept
+"tar the root filesystem" option selected in "Filesystem images".
 
-Where should the binaries be copied on the SDCard
--------------------------------------------------
+Prepare you SDCard
+==================
 
-Your SDCard must have its first partition using fat32 and marked bootable.
+For more information, visit
+http://elinux.org/RPi_Advanced_Setup#Advanced_SD_card_setup
 
-At the root of the partition, the RaspberryPi must find the following files:
+In summary, your SDCard must have first partition in fat32 and marked bootable.
 
- * bootcode.bin
- * config.txt
- * fixup_cd.dat
- * fixup.dat
- * start_cd.elf
- * start.elf
- * zImage
-
-So you should copy the entire content of output/images/rpi-firmware along with
-zImage.
+Create the required partitions:
+  - for a persistent rootfs, 10MiB is enough memory for the boot fat32
+    partition, and a second partition is required for the root filesystem
+  - for a volatile rootfs, 50MiB is required for the boot fat32 partition
 
 Note: You can create any number of partitions you desire, the only requirement
-is that the first partition must be using fat32 and bootable.
+is that the first partition must be using fat32 and be bootable.
 
-Persistent rootfs
-=================
+Mount the partitions (adjust 'sdX' to match your SDcard device):
 
-How to build it
----------------
+  $ sudo mount /dev/sdX1 /mnt/mountpointboot
+  $ sudo mount /dev/sdX2 /mnt/mountpointroot    (only for persistent rootfs)
 
-You only need to use the rpi_defconfig, to do so:
- * make rpi_defconfig
+Install the binaries to the SDCard
+----------------------------------
 
-What is generated
------------------
+At the root of the boot partition, the RaspberryPi must find the following
+files:
 
-After building, you should obtain this tree:
+    * bootcode.bin
+    * config.txt
+    * fixup.dat
+    * start.elf
+    * zImage
 
-    output/images/
-    +-- rootfs.tar
-    +-- rpi-firmware
-    |   +-- bootcode.bin
-    |   +-- config.txt
-    |   +-- fixup_cd.dat
-    |   +-- fixup.dat
-    |   +-- start_cd.elf
-    |   `-- start.elf
-    `-- zImage
+For example:
 
-Where should the binaries be copied on the SDCard
--------------------------------------------------
+ $ cp output/images/rpi-firmware/* /mnt/mountpointboot
+ $ cp output/images/zImage /mnt/mountpointboot/zImage.img
 
-Your SDCard must have its first partition using fat32 and marked bootable.
-It should also have another partition which will contain your rootfs, it should
-be partitioned as ext4.
+Note: The default name is kernel.img.
+Actually, the name is zImage and it's define in the file config.txt like:
+kernel=zImage
 
-Boot partition
-~~~~~~~~~~~~~~
+If you use a volatile rootfs, Skip to "Finish", below. For a persistent
+rootfs, there are further steps to do.
 
-The first partition will contain everything used to boot the RaspberryPi.
-You must copy theses files at the root of partition:
+Extract (as root!) the contents of the rootfs.tar archive into the second
+partition you created above:
 
- * bootcode.bin
- * config.txt
- * fixup_cd.dat
- * fixup.dat
- * start_cd.elf
- * start.elf
- * zImage
+  $ sudo tar xf rootfs.tar -C /mnt/mountpointroot
 
-So you should copy the entire content of output/images/rpi-firmware along with
-zImage.
+Finish
+======
 
-Rootfs partition
-~~~~~~~~~~~~~~~~
+Unmount all the partitions:
 
-The second partition will contain your rootfs.
-Simply extract (as root!) the contents of the rootfs.tar archive
-into this partition.
+  $ sudo umount /mnt/mountpointboot
+  $ sudo umount /mnt/mountpointroot     (only for persistent rootfs)
 
-For example: (Assuming mountpoint is a directory and exist)
-
- $ sudo mount /dev/sdXY /mnt/mountpoint
- $ sudo tar xf rootfs.tar -C /mnt/mountpoint
+And eject your SDcard from your computer SDcard reader.
 
+Insert the SDcard into your Raspberry Pi, and power it up. Your new system
+should come up, now.

board/wandboard/readme.txt

@@ -0,0 +1,37 @@
+Minimal board support for the Wandboard
+
+Wandboard's homepage is here: http://www.wandboard.org/
+
+This config is only tested with the dual core wandboard.
+
+Installing:
+
+You need a micro SD card and a slot/adapter for your development machine.
+
+Partition the SD card leaving at least 1 MB in front of the first partition.
+
+Partition layout (example):
+
+Disk /dev/sdi: 3965 MB, 3965190144 bytes
+255 heads, 63 sectors/track, 482 cylinders
+Units = cylinders of 16065 * 512 = 8225280 bytes
+Sector size (logical/physical): 512 bytes / 512 bytes
+I/O size (minimum/optimal): 512 bytes / 512 bytes
+Disk identifier: 0x77b47445
+
+   Device Boot      Start         End      Blocks   Id  System
+/dev/sdi1               2         482     3863632+  83  Linux
+
+Copy u-boot and its environment to the SD card:
+sudo dd if=output/images/u-boot.imx bs=512 seek=2 of=/dev/sd<x>
+sudo dd if=output/images/uboot-env.bin bs=512 seek=768 of=/dev/sd<x>
+
+Copy the root filesystem:
+sudo dd if=output/images/rootfs.ext2 of=/dev/sd<x>1
+
+Alternative commands to copy root filesystem:
+sudo mkfs.ext4 /dev/sd<x>1
+sudo mount /dev/sd<x>1 /mnt
+sudo tar xf output/images/rootfs.tar -C /mnt
+sudo umount /mnt
+

board/wandboard/uboot-env.txt

@@ -0,0 +1,20 @@
+baudrate=115200
+bootcmd=mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loaduimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi
+bootdelay=3
+bootscript=echo Running bootscript from mmc ...; source
+console=ttymxc0
+ethact=FEC
+ethaddr=00:1f:7b:b2:05:ee
+ethprime=FEC
+loadaddr=0x12000000
+loadbootscript=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};
+loaduimage=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}
+mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot}
+mmcboot=echo Booting from mmc ...; run mmcargs;  bootm; 
+mmcdev=0
+mmcpart=1
+mmcroot=/dev/mmcblk0p1 rootwait rw
+netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp
+netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} ${uimage}; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} ${fdt_file}; then bootm ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootm; else echo WARN: Cannot load the DT; fi; fi; else bootm; fi;
+script=boot/boot.scr
+uimage=boot/uImage

boot/at91dataflashboot/Config.in

@@ -1,3 +1,3 @@
 config BR2_TARGET_AT91DATAFLASHBOOT
-       depends on BR2_arm926t
-       bool "AT91 DataFlashBoot"
+	depends on BR2_arm926t
+	bool "AT91 DataFlashBoot"

boot/barebox/Config.in

@@ -12,7 +12,7 @@ choice
 	  Select the specific Barebox version you want to use
 
 config BR2_TARGET_BAREBOX_LATEST_VERSION
-	bool "2013.07.0"
+	bool "2013.10.1"
 
 config BR2_TARGET_BAREBOX_CUSTOM_VERSION
 	bool "Custom version"
@@ -40,10 +40,10 @@ endif
 
 config BR2_TARGET_BAREBOX_VERSION
 	string
-	default "2013.07.0"	if BR2_TARGET_BAREBOX_LATEST_VERSION
-	default $BR2_TARGET_BAREBOX_CUSTOM_VERSION_VALUE if BR2_TARGET_BAREBOX_CUSTOM_VERSION
+	default "2013.10.1"	if BR2_TARGET_BAREBOX_LATEST_VERSION
+	default BR2_TARGET_BAREBOX_CUSTOM_VERSION_VALUE if BR2_TARGET_BAREBOX_CUSTOM_VERSION
 	default "custom"	if BR2_TARGET_BAREBOX_CUSTOM_TARBALL
-	default $BR2_TARGET_BAREBOX_CUSTOM_GIT_VERSION if BR2_TARGET_BAREBOX_CUSTOM_GIT
+	default BR2_TARGET_BAREBOX_CUSTOM_GIT_VERSION if BR2_TARGET_BAREBOX_CUSTOM_GIT
 
 config BR2_TARGET_BAREBOX_CUSTOM_PATCH_DIR
 	string "custom patch dir"

boot/common.mk

@@ -1 +1 @@
-include boot/*/*.mk
+include $(sort $(wildcard boot/*/*.mk))

boot/mxs-bootlets/Config.in

@@ -43,16 +43,16 @@ choice
 	  Select which bootstream to generate
 
 config BR2_TARGET_MXS_BOOTLETS_BAREBOX
-       depends on BR2_TARGET_BAREBOX
-       bool "Barebox Bootloader"
+	depends on BR2_TARGET_BAREBOX
+	bool "Barebox Bootloader"
 
 config BR2_TARGET_MXS_BOOTLETS_LINUX
-       depends on BR2_LINUX_KERNEL
-       bool "Linux Kernel"
+	depends on BR2_LINUX_KERNEL
+	bool "Linux Kernel"
 
 config BR2_TARGET_MXS_BOOTLETS_UBOOT
-       depends on BR2_TARGET_UBOOT
-       bool "U-boot bootloader"
+	depends on BR2_TARGET_UBOOT
+	bool "U-boot bootloader"
 
 endchoice
 
@@ -82,9 +82,9 @@ config BR2_TARGET_MXS_BOOTLETS_CUSTOM_BOARD
 endchoice
 
 config BR2_TARGET_MXS_BOOTLETS_CUSTOM_BOARD_NAME
-       string "Custom board name"
-       depends on BR2_TARGET_MXS_BOOTLETS_CUSTOM_BOARD
-       help
-         Name of the board to build the bootlets for
+	string "Custom board name"
+	depends on BR2_TARGET_MXS_BOOTLETS_CUSTOM_BOARD
+	help
+	  Name of the board to build the bootlets for
 
 endif

boot/syslinux/syslinux.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-SYSLINUX_VERSION = 4.06
+SYSLINUX_VERSION = 4.07
 SYSLINUX_SOURCE  = syslinux-$(SYSLINUX_VERSION).tar.bz2
 SYSLINUX_SITE    = $(BR2_KERNEL_MIRROR)/linux/utils/boot/syslinux/4.xx/
 

boot/uboot/Config.in

@@ -18,10 +18,10 @@ choice
 	  Select the specific U-Boot version you want to use
 
 config BR2_TARGET_UBOOT_LATEST_VERSION
-	bool "2013.07"
+	bool "2013.10"
 
 config BR2_TARGET_UBOOT_CUSTOM_VERSION
-       bool "Custom version"
+	bool "Custom version"
 	help
 	  This option allows to use a specific official versions
 
@@ -31,25 +31,44 @@ config BR2_TARGET_UBOOT_CUSTOM_TARBALL
 config BR2_TARGET_UBOOT_CUSTOM_GIT
 	bool "Custom Git repository"
 
+config BR2_TARGET_UBOOT_CUSTOM_HG
+	bool "Custom Mercurial repository"
+
 endchoice
 
 config BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE
 	string "U-Boot version"
 	depends on BR2_TARGET_UBOOT_CUSTOM_VERSION
 
-if BR2_TARGET_UBOOT_CUSTOM_TARBALL
-
 config BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION
 	string "URL of custom U-Boot tarball"
+	depends on BR2_TARGET_UBOOT_CUSTOM_TARBALL
+
+if BR2_TARGET_UBOOT_CUSTOM_GIT || BR2_TARGET_UBOOT_CUSTOM_HG
+
+config BR2_TARGET_UBOOT_CUSTOM_REPO_URL
+	string "URL of custom repository"
+	default BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL \
+		if BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL != ""  # legacy
+
+config BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION
+	string "Custom repository version"
+	default BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION \
+		if BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION != ""  # legacy
+	help
+	  Revision to use in the typical format used by Git/Mercurial
+	  E.G. a sha id, a tag, branch, ..
 
 endif
 
 config BR2_TARGET_UBOOT_VERSION
 	string
-	default "2013.07"	if BR2_TARGET_UBOOT_LATEST_VERSION
-	default $BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE if BR2_TARGET_UBOOT_CUSTOM_VERSION
+	default "2013.10"	if BR2_TARGET_UBOOT_LATEST_VERSION
+	default BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE \
+		if BR2_TARGET_UBOOT_CUSTOM_VERSION
 	default "custom"	if BR2_TARGET_UBOOT_CUSTOM_TARBALL
-	default $BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION if BR2_TARGET_UBOOT_CUSTOM_GIT
+	default BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION \
+		if BR2_TARGET_UBOOT_CUSTOM_GIT || BR2_TARGET_UBOOT_CUSTOM_HG
 
 config BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR
 	string "custom patch dir"
@@ -60,16 +79,6 @@ config BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR
 
 	  Most users may leave this empty
 
-if BR2_TARGET_UBOOT_CUSTOM_GIT
-
-config BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL
-	string "URL of custom Git repository"
-
-config BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION
-	string "Custom Git version"
-
-endif
-
 choice
 	prompt "U-Boot binary format"
 	default BR2_TARGET_UBOOT_FORMAT_BIN
@@ -87,6 +96,9 @@ config BR2_TARGET_UBOOT_FORMAT_BIN
 config BR2_TARGET_UBOOT_FORMAT_IMG
 	bool "u-boot.img"
 
+config BR2_TARGET_UBOOT_FORMAT_IMX
+	bool "u-boot.imx"
+
 config BR2_TARGET_UBOOT_FORMAT_NAND_BIN
 	bool "u-boot-nand.bin"
 

boot/uboot/uboot.mk

@@ -18,8 +18,11 @@ UBOOT_TARBALL = $(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION))
 UBOOT_SITE    = $(patsubst %/,%,$(dir $(UBOOT_TARBALL)))
 UBOOT_SOURCE  = $(notdir $(UBOOT_TARBALL))
 else ifeq ($(BR2_TARGET_UBOOT_CUSTOM_GIT),y)
-UBOOT_SITE        = $(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL))
+UBOOT_SITE        = $(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_REPO_URL))
 UBOOT_SITE_METHOD = git
+else ifeq ($(BR2_TARGET_UBOOT_CUSTOM_HG),y)
+UBOOT_SITE        = $(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_REPO_URL))
+UBOOT_SITE_METHOD = hg
 else
 # Handle stable official U-Boot versions
 UBOOT_SITE    = ftp://ftp.denx.de/pub/u-boot
@@ -40,6 +43,8 @@ else ifeq ($(BR2_TARGET_UBOOT_FORMAT_NAND_BIN),y)
 UBOOT_BIN          = u-boot-nand.bin
 else ifeq ($(BR2_TARGET_UBOOT_FORMAT_IMG),y)
 UBOOT_BIN          = u-boot.img
+else ifeq ($(BR2_TARGET_UBOOT_FORMAT_IMX),y)
+UBOOT_BIN          = u-boot.imx
 else ifeq ($(BR2_TARGET_UBOOT_FORMAT_SB),y)
 UBOOT_BIN          = u-boot.sb
 UBOOT_MAKE_TARGET  = $(UBOOT_BIN)

configs/arm_foundationv8_defconfig

@@ -8,8 +8,8 @@ BR2_TARGET_BOOT_WRAPPER_AARCH64_DTS="vexpress-foundation-v8"
 BR2_TARGET_BOOT_WRAPPER_AARCH64_BOOTARGS="root=/dev/vda consolelog=9 console=ttyAMA0 rw"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.linaro.org/kernel/linaro-aarch64.git"
-BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="7181edd0539e195f78adedbb6c3878f9f1e0c4bb"
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.linaro.org/kernel/linaro-aarch64.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="7181edd0539e195f78adedbb6c3878f9f1e0c4bb"
 BR2_LINUX_KERNEL_DEFCONFIG="vexpress"
 BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
 BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"

configs/at91sam9260dfc_defconfig

@@ -16,4 +16,4 @@ BR2_TARGET_UBOOT_BOARDNAME="at91sam9260ek_dataflash_cs0"
 
 # Kernel
 BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_DEFCONFIG="at91sam9260"
+BR2_LINUX_KERNEL_DEFCONFIG="at91sam9260_9g20"

configs/at91sam9261ek_defconfig

@@ -16,4 +16,4 @@ BR2_TARGET_UBOOT_BOARDNAME="at91sam9261ek_dataflash_cs0"
 
 # Kernel
 BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_DEFCONFIG="at91sam9261"
+BR2_LINUX_KERNEL_DEFCONFIG="at91sam9261_9g10"

configs/atngw100_defconfig

@@ -1,6 +1,11 @@
 # Architecture
 BR2_avr32=y
 
+# Lock down kernel headers version, to match the kernel version used
+# below.
+BR2_KERNEL_HEADERS_VERSION=y
+BR2_DEFAULT_KERNEL_VERSION="3.9.11"
+
 # Filesystems
 BR2_TARGET_ROOTFS_JFFS2=y
 BR2_TARGET_ROOTFS_JFFS2_FLASH_128=y
@@ -17,6 +22,10 @@ BR2_TARGET_UBOOT_BOARDNAME="atngw100"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2010.09"
 
-# Kernel
+# Kernel. Locked to 3.9.x, because 3.10.x fails to build with
+# relocation truncated to fit: R_AVR32_16N_PCREL against symbol
+# `_ctype'
 BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.9.11"
 BR2_LINUX_KERNEL_DEFCONFIG="atngw100"

configs/atstk100x_defconfig

@@ -1,6 +1,10 @@
 # Architecture
 BR2_avr32=y
 
+# Lock to same version as kernel
+BR2_KERNEL_HEADERS_VERSION=y
+BR2_DEFAULT_KERNEL_VERSION="3.9.11"
+
 # U-Boot
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="atstk1002"
@@ -10,7 +14,7 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2010.09"
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="2.6.35"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.9.11"
 BR2_LINUX_KERNEL_USE_DEFCONFIG=y
 BR2_LINUX_KERNEL_DEFCONFIG="atstk1002"
 

configs/beaglebone_defconfig

@@ -30,8 +30,8 @@ BR2_TARGET_UBOOT_SPL_NAME="MLO"
 # kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.ti.com/ti-linux-kernel/ti-linux-kernel.git"
-BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="935f6c2f82056d538b528272e2bdbb5c08d69a58"
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.ti.com/ti-linux-kernel/ti-linux-kernel.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="935f6c2f82056d538b528272e2bdbb5c08d69a58"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/beaglebone/linux-3.8.config"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y

configs/calao_snowball_defconfig

@@ -16,8 +16,8 @@ BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="snowball"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="https://github.com/igloocommunity/igloo-kernel"
-BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="stable-linux-ux500-3.4"
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/igloocommunity/igloo-kernel"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="stable-linux-ux500-3.4"
 BR2_LINUX_KERNEL_PATCH="board/calao/snowball/"
 BR2_LINUX_KERNEL_DEFCONFIG="u8500"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y

configs/calao_usb_a9260_defconfig

@@ -10,6 +10,8 @@ BR2_TARGET_AT91BOOTSTRAP_NANDFLASH=y
 BR2_TARGET_BAREBOX=y
 BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="usb_a9260"
 BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.10"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/calao/usb-a9260/linux-3.7.4.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/calao_usb_a9263_defconfig

@@ -9,6 +9,8 @@ BR2_TARGET_AT91BOOTSTRAP_NANDFLASH=y
 BR2_TARGET_BAREBOX=y
 BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="usb_a9263"
 BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.10"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/calao/usb-a9263/linux-3.4.4.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/calao_usb_a9g20_lpw_defconfig

@@ -10,6 +10,8 @@ BR2_TARGET_BAREBOX=y
 BR2_TARGET_BAREBOX_CUSTOM_PATCH_DIR="board/calao/usb-a9g20-lpw/"
 BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="usb_a9g20"
 BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.10"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/calao/usb-a9g20-lpw/linux-3.4.4.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/cubieboard2_defconfig

@@ -0,0 +1,40 @@
+# Architecture
+BR2_arm=y
+BR2_cortex_a7=y
+
+# System configuration
+BR2_TARGET_GENERIC_HOSTNAME="Cubieboard2"
+BR2_TARGET_GENERIC_ISSUE="Welcome to use Cubieboard!"
+BR2_TARGET_GENERIC_GETTY=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/cubietech/cubieboard/post-build.sh"
+
+# Additional tools
+BR2_PACKAGE_HOST_SUNXI_TOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_PACKAGE_SUNXI_TOOLS=y
+BR2_PACKAGE_SUNXI_BOARDS=y
+BR2_PACKAGE_SUNXI_BOARDS_FEX_FILE="a20/cubieboard2.fex"
+
+# Kernel headers
+BR2_KERNEL_HEADERS_3_4=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/linux-sunxi/linux-sunxi.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="5dda5145c877335e17bd9ca48954841acc0f785a"
+BR2_LINUX_KERNEL_VERSION="sunxi-3.4"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/cubietech/cubieboard/linux-cubieboard2.config"
+
+# Bootloaders
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="cubieboard2"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_VERSION="sunxi"
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux-sunxi/u-boot-sunxi.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="b4bca5e0651b460a4511582f07a935cb48f74948"
+BR2_TARGET_UBOOT_FORMAT_BIN=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"

configs/cubieboard_defconfig

@@ -22,8 +22,8 @@ BR2_KERNEL_HEADERS_3_4=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="https://github.com/linux-sunxi/linux-sunxi.git"
-BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="274a66a7bfcbaabb88d63e4eba161965383cc416"
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/linux-sunxi/linux-sunxi.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="274a66a7bfcbaabb88d63e4eba161965383cc416"
 BR2_LINUX_KERNEL_VERSION="sunxi-3.4"
 BR2_LINUX_KERNEL_DEFCONFIG="sun4i"
 
@@ -32,8 +32,8 @@ BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="cubieboard"
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
 BR2_TARGET_UBOOT_VERSION="sunxi"
-BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="https://github.com/linux-sunxi/u-boot-sunxi.git"
-BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="1a8ac55429f7f8cc9f100c1cf2dc0195cf81e76f"
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux-sunxi/u-boot-sunxi.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="1a8ac55429f7f8cc9f100c1cf2dc0195cf81e76f"
 BR2_TARGET_UBOOT_FORMAT_BIN=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"

configs/ea3250_defconfig

@@ -27,8 +27,8 @@ BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="ea3250"
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
 BR2_TARGET_UBOOT_VERSION="master"
-BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/uboot-2009.03-lpc32xx"
-BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="master"
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.lpclinux.com/uboot-2009.03-lpc32xx"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="master"
 BR2_TARGET_UBOOT_FORMAT_BIN=y
 BR2_TARGET_LPC32XXCDL=y
 BR2_TARGET_LPC32XXCDL_BOARDNAME="ea3250"
@@ -39,8 +39,8 @@ BR2_TARGET_LPC32XXCDL_BOARDNAME="ea3250"
 #
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/linux-2.6.34-lpc32xx"
-BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="master"
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.lpclinux.com/linux-2.6.34-lpc32xx"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="master"
 BR2_LINUX_KERNEL_VERSION="master"
 BR2_LINUX_KERNEL_PATCH=""
 BR2_LINUX_KERNEL_USE_DEFCONFIG=y

configs/fdi3250_defconfig

@@ -27,8 +27,8 @@ BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="fdi3250"
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
 BR2_TARGET_UBOOT_VERSION="master"
-BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/uboot-2009.03-lpc32xx"
-BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="master"
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.lpclinux.com/uboot-2009.03-lpc32xx"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="master"
 BR2_TARGET_UBOOT_FORMAT_BIN=y
 BR2_TARGET_LPC32XXCDL=y
 BR2_TARGET_LPC32XXCDL_BOARDNAME="fdi3250"
@@ -39,8 +39,8 @@ BR2_TARGET_LPC32XXCDL_BOARDNAME="fdi3250"
 #
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/linux-2.6.34-lpc32xx"
-BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="master"
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.lpclinux.com/linux-2.6.34-lpc32xx"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="master"
 BR2_LINUX_KERNEL_VERSION="master"
 BR2_LINUX_KERNEL_PATCH=""
 BR2_LINUX_KERNEL_USE_DEFCONFIG=y

configs/freescale_imx6sabresd_defconfig

@@ -0,0 +1,23 @@
+# architecture
+BR2_arm=y
+BR2_cortex_a9=y
+
+# system
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
+
+# kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.0.35_4.1.0"
+BR2_LINUX_KERNEL_DEFCONFIG="imx6"
+
+# filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+
+# bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="mx6q_sabresd"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.0.35_4.1.0"

configs/freescale_imx6sololiteevk_defconfig

@@ -0,0 +1,23 @@
+# architecture
+BR2_arm=y
+BR2_cortex_a9=y
+
+# system
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
+
+# kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.0.35_4.1.0"
+BR2_LINUX_KERNEL_DEFCONFIG="imx6s"
+
+# filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+
+# bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="mx6sl_evk"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.0.35_4.1.0"

configs/freescale_mpc8315erdb_defconfig

@@ -10,15 +10,16 @@ BR2_TARGET_ROOTFS_JFFS2_CUSTOM_PAGESIZE=0x200
 BR2_TARGET_ROOTFS_JFFS2_CUSTOM_EBSIZE=0x4000
 BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER=y
 
-# Lock to 3.8 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_8=y
+# Lock headers version to match and avoid breakage
+BR2_KERNEL_HEADERS_VERSION=y
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/mpc8315erdb/linux-3.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/mpc8315erdb/linux-3.12.config"
 BR2_LINUX_KERNEL_UIMAGE=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="mpc8315erdb"
@@ -31,4 +32,4 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="MPC8315ERDB_NAND"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2013.04"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2013.10"

configs/freescale_p1010rdb_defconfig

@@ -9,15 +9,16 @@ BR2_TARGET_ROOTFS_JFFS2_CUSTOM=y
 BR2_TARGET_ROOTFS_JFFS2_CUSTOM_PAGESIZE=0x20
 BR2_TARGET_ROOTFS_JFFS2_CUSTOM_EBSIZE=0x20000
 
-# Lock to 3.8 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_8=y
+# Lock headers version to match and avoid breakage
+BR2_KERNEL_HEADERS_VERSION=y
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/p1010rdb/linux-3.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/p1010rdb/linux-3.12.config"
 BR2_LINUX_KERNEL_UIMAGE=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="p1010rdb"
@@ -30,4 +31,4 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="P1010RDB_NOR"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2013.04"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2013.10"

configs/gnublin_defconfig

@@ -15,13 +15,13 @@ BR2_TARGET_ROOTFS_EXT2_BLOCKS=475000
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="GNUBLIN"
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://gitorious.org/u-boot-gnublin-support/u-boot-gnublin-support.git"
-BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="2009.11_gnublin_support_v2"
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://gitorious.org/u-boot-gnublin-support/u-boot-gnublin-support.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="2009.11_gnublin_support_v2"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://gitorious.org/linux-3-7-gnublin/linux-3-7-gnublin.git"
-BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="v3.7-gnublin-2"
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://gitorious.org/linux-3-7-gnublin/linux-3-7-gnublin.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="v3.7-gnublin-2"
 BR2_LINUX_KERNEL_DEFCONFIG="gnublin"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y

configs/mx53loco_defconfig

@@ -8,8 +8,8 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="mx53_loco"
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
-BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="rel_imx_2.6.35_11.09.01"
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_2.6.35_11.09.01"
 
 # filesystem
 BR2_TARGET_ROOTFS_EXT2=y
@@ -17,6 +17,6 @@ BR2_TARGET_ROOTFS_EXT2=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git"
-BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="rel_imx_2.6.35_11.09.01"
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_2.6.35_11.09.01"
 BR2_LINUX_KERNEL_DEFCONFIG="imx5"

configs/nitrogen6x_defconfig

@@ -14,12 +14,13 @@ BR2_TARGET_ROOTFS_EXT2_2r1=y
 # bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="nitrogen6q"
+BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="http://github.com/boundarydevices/u-boot-imx6/tarball/7176d07/u-boot-7176d07.tar.gz"
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="http://github.com/boundarydevices/u-boot-imx6/tarball/4034391/u-boot-4034391.tar.gz"
 
 # kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="http://github.com/boundarydevices/linux-imx6/tarball/2dc5560/linux-imx6-2dc5560.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="http://github.com/boundarydevices/linux-imx6/tarball/5809938/linux-imx6-5809938.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="nitrogen6x"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y

configs/olimex_imx233_olinuxino_defconfig

@@ -13,8 +13,9 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.9 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_9=y
+# Lock headers version to match and avoid breakage
+BR2_KERNEL_HEADERS_VERSION=y
+BR2_DEFAULT_KERNEL_VERSION="3.12"
 
 # Bootloader
 BR2_TARGET_MXS_BOOTLETS=y
@@ -25,9 +26,21 @@ BR2_TARGET_MXS_BOOTLETS_CUSTOM_BOARD_NAME="imx23_olinuxino_dev"
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.9.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/olimex/imx233_olinuxino/linux-3.9.config"
-BR2_LINUX_KERNEL_PATCH="board/olimex/imx233_olinuxino"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/olimex/imx233_olinuxino/linux-3.12.config"
+BR2_LINUX_KERNEL_PATCH="http://github.com/koliqi/imx23-olinuxino/raw/3.12-rc2/kernel/101-soc-audio-dts.patch http://github.com/koliqi/imx23-olinuxino/raw/3.12-rc2/kernel/ASoC_driver_for_i.MX233.patch"
 BR2_LINUX_KERNEL_APPENDED_ZIMAGE=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx23-olinuxino"
+
+# For automatic firmware loading
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
+
+# Firmware for WiFi
+BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_7010=y
+BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9271=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y
+BR2_PACKAGE_ZD1211_FIRMWARE=y

configs/phy3250_defconfig

@@ -27,8 +27,8 @@ BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="phy3250"
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
 BR2_TARGET_UBOOT_VERSION="master"
-BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/uboot-2009.03-lpc32xx"
-BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="master"
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.lpclinux.com/uboot-2009.03-lpc32xx"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="master"
 BR2_TARGET_UBOOT_FORMAT_BIN=y
 BR2_TARGET_LPC32XXCDL=y
 BR2_TARGET_LPC32XXCDL_BOARDNAME="phy3250"
@@ -39,8 +39,8 @@ BR2_TARGET_LPC32XXCDL_BOARDNAME="phy3250"
 #
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/linux-2.6.34-lpc32xx"
-BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="master"
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.lpclinux.com/linux-2.6.34-lpc32xx"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="master"
 BR2_LINUX_KERNEL_VERSION="master"
 BR2_LINUX_KERNEL_PATCH=""
 BR2_LINUX_KERNEL_USE_DEFCONFIG=y

configs/qemu_arm_nuri_defconfig

@@ -15,11 +15,11 @@ BR2_TARGET_ROOTFS_INITRAMFS=y
 
 # Lock to 3.10 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.10.4"
+BR2_DEFAULT_KERNEL_VERSION="3.10.20"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.20"
 BR2_LINUX_KERNEL_DEFCONFIG="exynos4"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_arm_versatile_defconfig

@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.10 headers to avoid breaking with newer kernels
+# Lock to 3.11 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.10.4"
+BR2_DEFAULT_KERNEL_VERSION="3.11.9"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.9"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-3.10.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-3.11.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_arm_vexpress_defconfig

@@ -13,13 +13,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.10 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.10.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12.1"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.1"
 BR2_LINUX_KERNEL_DEFCONFIG="vexpress"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_microblazebe_mmu_defconfig

@@ -19,9 +19,9 @@ BR2_TARGET_ROOTFS_INITRAMFS=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-3.10.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-3.12.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_USE_CUSTOM_DTS=y
 BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/qemu/microblazebe-mmu/system.dts"

configs/qemu_microblazeel_mmu_defconfig

@@ -19,9 +19,9 @@ BR2_TARGET_ROOTFS_INITRAMFS=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-3.10.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-3.12.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_USE_CUSTOM_DTS=y
 BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/qemu/microblazeel-mmu/system.dts"

configs/qemu_mips64_malta_defconfig

@@ -10,16 +10,16 @@ BR2_PREFER_STATIC_LIB=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.10 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.10.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12.1"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.10.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.12.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_mips_malta_defconfig

@@ -6,16 +6,16 @@ BR2_mips_32r2=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.10 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.10.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12.1"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-3.10.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-3.12.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_mipsel_malta_defconfig

@@ -6,16 +6,16 @@ BR2_mips_32r2=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.10 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.10.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12.1"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-3.10.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-3.12.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_ppc_g3beige_defconfig

@@ -6,16 +6,16 @@ BR2_powerpc_750=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.10 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.10.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12.1"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.10.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.12.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_ppc_mpc8544ds_defconfig

@@ -6,14 +6,14 @@ BR2_powerpc_8548=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Lock to 3.10 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.10.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12.1"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.1"
 BR2_LINUX_KERNEL_DEFCONFIG="mpc85xx"
 BR2_LINUX_KERNEL_VMLINUX=y
 

configs/qemu_ppc_virtex_ml507_defconfig

@@ -6,9 +6,9 @@ BR2_powerpc_440=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Lock to 3.10 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.10.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12.1"
 
 # Use soft float
 BR2_SOFT_FLOAT=y
@@ -16,7 +16,7 @@ BR2_SOFT_FLOAT=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.1"
 BR2_LINUX_KERNEL_DEFCONFIG="44x/virtex5"
 BR2_LINUX_KERNEL_VMLINUX=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y

configs/qemu_sh4_r2d_defconfig

@@ -12,7 +12,7 @@ BR2_TARGET_ROOTFS_EXT2=y
 
 # Lock to 3.2 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.2.49"
+BR2_DEFAULT_KERNEL_VERSION="3.2.52"
 
 # The kernel wants to use the -m4-nofpu option to make sure that it
 # doesn't use floating point operations.
@@ -21,7 +21,7 @@ BR2_EXTRA_GCC_CONFIG_OPTIONS="--with-multilib-list=m4,m4-nofpu"
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.49"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.52"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-3.2.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_sparc_ss10_defconfig

@@ -6,13 +6,13 @@ BR2_sparc_v8=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.7 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.7.10"
+BR2_DEFAULT_KERNEL_VERSION="3.12.1"
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.10"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.1"
 BR2_LINUX_KERNEL_DEFCONFIG="sparc32"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_x86_64_defconfig

@@ -9,13 +9,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.10 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.10.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12.1"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-3.10.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-3.12.config"

configs/qemu_x86_defconfig

@@ -10,13 +10,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.10 headers to avoid breaking with newer kernels
+# Lock to 3.12 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.10.4"
+BR2_DEFAULT_KERNEL_VERSION="3.12.1"
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-3.10.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-3.12.config"

configs/raspberrypi_defconfig

@@ -16,8 +16,8 @@ BR2_DEFAULT_KERNEL_VERSION="3.6.11"
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://github.com/raspberrypi/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="0006326"
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://github.com/raspberrypi/linux.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="1587f77"
 BR2_LINUX_KERNEL_USE_DEFCONFIG=y
-BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
+BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi_quick"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/sheevaplug_defconfig

@@ -13,17 +13,19 @@ BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_2K_128K=y
 
 # Lock down headers to avoid breaking with new defaults
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.5.4"
+BR2_DEFAULT_KERNEL_VERSION="3.11.8"
 
 # bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="sheevaplug"
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2013.10"
 BR2_TARGET_UBOOT_FORMAT_KWB=y
 # BR2_TARGET_UBOOT_NETWORK is not set
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.5.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.8"
 BR2_LINUX_KERNEL_DEFCONFIG="kirkwood"
 BR2_LINUX_KERNEL_UIMAGE=y