Fixes e.g.
http://autobuild.buildroot.net/results/9c7/9c7a97882d446a42cabcb07e4af7e6825192e70b
VLC cannot build static and shared libraries at the same time.
Also, live555 only has a static library, and VLC tries to link this into
a shared library. Therefore, disable the live555 plugin unless static
linking is selected. It would be better to build live555 as a shared
library, but that's for another patch.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix a large number of incorrect configure options for vlc.
Configure warnings reported by Arnout Vandecappelle, in his analysis of vlc
autobuild failures.
Notice that this change of configure options is caused by our AUTORECONF
picking up a different PKG_WITH_MODULES definition. If vlc is bumped in the
future and AUTORECONF is turned off, then this needs to be reverted.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When libusb support is requested in pcsc-lite, the configure script will try
to link a test application to check libusb_init(). However, when libusb
needs threads, the linking step should link in threads as well.
The configure script, first tries to call libusb-config to determine the
necessary cflags and libraries (which should include the thread flags), but
this program does not exist, so the cflags/libs variables are empty.
Therefore, add a patch to explicitly add PTHREAD_CFLAGS and PTHREAD_LIBS to
the libusb test, so libusb is detected correctly.
Fixes
http://autobuild.buildroot.org/results/432/432be0db3f8415f6a026b69234579ad4d23b6421/
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(external) nios2 toolchain is currently missing the fallocate64 system
call. Because of compiling the e2fsprogs package with _FILE_OFFSET_BITS=64,
_LARGEFILE_SOURCE and _LARGEFILE64_SOURCE the fallocate call is replaced
by fallocate64 by the glibc. Therefore fallocate is entirely disabled while
configuring the package.
Fixes http://autobuild.buildroot.org/results/70a/70a47bd7392560cbc1c64769c8357c0b4c91ca3b/
Signed-off-by: Frank Bergmann <frank@frajasalo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
e4defrag has to be disabled because of the (external) toolchain declares
the fallocate64 call in the header files but don't implement it in the
library. e4defrag defines its own fallocate64 function that throws an
error because of the previous declaration in the toolchain header.
Signed-off-by: Frank Bergmann <frank@frajasalo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc build scripts use wrong variable name to specify xtensa overlay
application command. As a result gcc is built with the default overlay,
which leads to obscure failures later in the build process.
xtensa toolchain needs an additional configuration for a specific core
variant we're building for. This configuration is called 'overlay' and
is an archive with files for binutils, gcc and gdb that replace
corresponding files in toolchain components.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host-libxml2 package does not depend on zlib or lzma, but may
detect versions available on the host. This can cause problems in the
following situation:
1 host-libxml2 is built, finds an available lzma library in the
system, enables lzma support by using it.
2 host-xz is built, which installs a different version of the lzma
library into $(HOST_DIR)
3 host-libxslt is built, tries to link against libxml2, which fails
because now the visible lzma library is the one from
$(HOST_DIR)/usr/lib and no longer the one libxml2 was built agains.
To fix this, this patch passes --without-zlib and --without-lzma to
the host package.
In addition, since the target variant of libxml2 does not have
provisions to depend on the target lzma, we also pass --without-lzma
for the target variant. The case of zlib for the target was already
properly taken into account.
Fixes:
http://autobuild.buildroot.org/results/6dc/6dcef647eb0f0db7de3f34194eb15ceebc645b39/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To install its shared library, the luajit Makefile does:
cd src && test -f $(FILE_SO) && \
$(INSTALL_X) $(FILE_SO) $(INSTALL_DYN) && \
$(LDCONFIG) $(INSTALL_LIB) && \
$(SYMLINK) $(INSTALL_SONAME) $(INSTALL_SHORT1) && \
$(SYMLINK) $(INSTALL_SONAME) $(INSTALL_SHORT2) || :
This means that if ldconfig doesn't work or isn't available on the
system, it won't create the libluajit-5.1.so -> libluajit-5.1.so.5.2.0
symbolic link.
Not having this symbolic link prevents lua-ev from finding the shared
version of the luajit library, and it fallbacks to using the
libluajit.a static library. However, this static library is not built
with -fPIC, so using it within a shared library doesn't work, and
leads to build failures on architectures that really do want to have
non-fPIC code into a shared library, such as x86-64.
By passing LDCONFIG=true during the installation steps of luajit, we
ensure that the symbolic links are created, which allows lua-ev to
detect the shared library properly, making everybody happy.
Investigation conducted with Samuel Martin. Thanks!
Fixes:
http://autobuild.buildroot.org/results/41c/41c8bb9cf91a86908a150dae27726136cb56f5b7/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
this config prevents the introduction of some HOST_DIR paths on target
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
since the comeback of version in module path (see commit ccd68a51)
the upstream Makefiles are usable for install.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A bug has been reported upstream to fix this issue properly, and a
GStreamer developer agreed with our proposal. We add the bug URL to
comments on Config.in to let the interested users follow the progress of
this issue.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We've seen autobuilder failures for vlc on many platforms and we don't
know how to solve them. It is also currently orphaned, i.e. there is
nobody who is actively using the package and maintaining it in
buildroot.
We could mark the package as BROKEN, but that would make it completely
invisible for the users and the autobuilders, which would not help its
orphan-ness. Therefore, instead, add a big fat warning in the config
menus that it has known issues.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When I saw this patch it took me a while to figure out how/why it worked,
so let's make life easier for the eventual version bumper to understand
what's going on here.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2013-6466.
openswan-wno-error-cpp.patch is no longer required since it's now
conditional on a check for a modern enough compiler.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 0.8 version hasn't seen any updates since 2005, and there's no real
reason to continue to use it today, so deprecate it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes runtime failure of gst-fsl-plugins, e.g.
(gst-plugin-scanner:1700): GStreamer-WARNING **: Failed to load
plugin '/usr/lib/gstreamer-0.10/libmfw_vpu.so':
/usr/lib/libgstfsl-0.10.so.0: undefined symbol: shm_open)
when compiled with buildroot/glibc toolchain.
See also old buildroot mailing list request [1].
[1] http://lists.busybox.net/pipermail/buildroot/2013-June/073910.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rename the GRAPH_OUT and GRAPH_ALT variables according to our
recently-agreed naming scheme for user-facing variables:
- GRAPH_OUT -> BR2_GRAPH_OUT
- GRAPH_ALT -> BR2_GRAPH_ALT
The documentation part of the rename is handled by Thomas as
part of his manual fixing spree. ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
package/libtool/libtool-0001-mips64-n64-linking.patch touches an m4
file, so applying it triggers a run of autoconf, automake, etc. This
sometimes leads to build failures due to incompatible system autotools.
This was observed on Fedora 10, which has automake 1.11 while the
generated files that are included in the tarball require automake
1.11.1.
We cannot simply set HOST_LIBTOOL_AUTORECONF = YES because that would
create a circular dependency on host-libtool. Therefore, the patch
patch is applied on the installed libtool.m4 instead of in the source
tree. Then, it also needs to be renamed to something that doesn't
match buildroot's patch convention so it doesn't get picked up
automatically.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_PACKAGE_SCONESERVER_HTTP_SCONESITE_IMAGE option of sconeserver
selects imagemagick, but forgets to depends on BR2_USE_MMU, which
imagemagick depends on.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A number of packages that select Pango (which depends on BR2_USE_MMU)
forget to also depends on BR2_USE_MMU. This commit fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libblkid library in util-linux uses fork. While it seems
potentially possible to disable the parts of the library that use fork
(the only parts using fork are parts related to LVM and Device Mapper,
which are said to be legacy as they are replaced by sysfs based
scanning, instead of having to fork to run a separate process).
However, since libblkid is used by:
- e2fsprogs, which uses lots of fork all over the place
- udev, which most likely will also need fork
There is not much point in making libblkid fork-less. As a
consequence, this commit makes util-linux/libblkid unavailable on
non-MMU architectures, and propagates the relevant dependency to the
reverse dependencies of libblkid.
This fixes the e2fsprogs build failure seen on Blackfin. The failure
was due to a configure test of e2fsprogs which was trying to link a
small test program against libblkid, which failed because there was an
undefined reference to fork() in the libblkid code.
Fixes:
http://autobuild.buildroot.net/results/ee2c1568d16ac040011dd4d6d8b543ff9e9e2622/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch cairo-001-blackfin-build-fix.patch was added in commit
d372d0b677 ('cairo: add patch to fix
Blackfin build failure') to take into account the fact that Blackfin
has a non-empty USER_LABEL_PREFIX: C symbol 'foo' corresponds to
assembly symbol '_foo', contrary to most other architectures where
they are the same.
However, the patch was only fixing the relevant macros in
src/cairo-compiler-private.h and did not take into account the
duplicated version of these macros in
util/cairo-script/cairo-script-private.h. This commit fixes that.
This commit is fixing a build failure on Blackfin, for which there was
no recorded autobuilder result because this problem was hidden by the
problem fixed by the previous commit ('cairo: fix build on Blackfin in
test/cairo-test-runner.c').
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ELDK now relies on Yocto, so it no longer has the funky
non-standard way of doing multilib. Also, we didn't mention that Yocto
toolchains/SDK are not suitable for usage with Buildroot. Therefore,
this commit rewords this part of the documentation to explain that
Yocto/OpenEmbedded SDKs cannot be used as external toolchains in
Buildroot, and why.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Replace ADI by Analog Devices, which is clearer for most people, and
remove the Xilinx external toolchains since we have deprecated them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have eglibc and glibc support in the internal backend, and
no longer marked as experimental, a little bit of rewording is
needed. It is no longer necessary to indicate that uClibc was
historically supported as the only C library, and that the glibc
support is experimental. We also update the rest of the description to
be less uClibc specific.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is no need to tell people that they should remove stamp files: they
should use the make <pkg>-reconfigure and make <pkg>-rebuild make targets
instead. We still keep an explanation about stamp files, just to give the
user an insight on how Buildroot works internally.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The conditional (suggested by me) introduced in 108952 (rt-tests: disable
for uclibc mips) isn't actually valid kconfig syntax, causing menuconfig to
error out.
Rewrite it to use proper syntax.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For some architectures (eg. Arc, Cris, Hexagon, ia64, Parisc, Score and
Xtensa), the Linux buildsystem tries to call the cross-compiler when
installing the headers.
This is a spurious call, since a cross-compiler is not needed at all to
install the headers.
As some users have reported the issue, just add a comment in linux-headers.mk
directing the user to ignore those errors.
Reported-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To allow proper nesting of suboptions of a package, the suboptions should
come directly after the main option, and cannot be interleaved with a
comment.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The AM_PATH_ALSA macro in utils/alsa.m4 unconditionally uses -ldl. This
breaks compilation of alsa-utils (and probably other packages using this
macro) for targets that do not support dynamic loading, such as for
Blackfin FLAT binaries.
This patch updates the macro to check if dlopen is available, and use that
result to conditionally add -ldl to the list of libraries.
Fixes
http://autobuild.buildroot.org/results/de2/de286880973be956f6c504aa9a758171d6f49674/build-end.log
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit a9baea4345 ('pixman: add patch
to fix Microblaze build failure'), a patch is added to the pixman
package to avoid using the FE_DIVBYZERO definition when it is not
available. However, it was using the have_fe_divbyzero variable to
define or not HAVE_FEDIVBYZERO, while the AC_CHECK_DECL autoconf macro
sets the ac_cv_have_decl_FE_DIVBYZERO variable.
The end result was that the FE_DIVBYZERO macro was considered as never
being available. This commit fixes that by using the appropriate
variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages (actually, just oprofile) need to link against libiberty.
This option just installs libiberty.a so it has no effect on the target,
therefore it's not needed to add a config option for it.
Before binutils-2.24, there was a bug in libiberty/Makefile.in that
caused libiberty to be installed regardless of the
--enable-install-libiberty option. This problem wasn't noticed before
because binutils-2.24 is not selected on any of the autobuilders: the
version can only be selected if an internal toolchain is used, and it
defaults to 2.21.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Microblaze build of pixman was failing due to FE_DIVBYZERO not
being implemented. It turns out that the usage of it, like fenv.h and
feenableexcept() is optional. So the patch simply adds a configure
check and disables the appropriate code (which is only use in the
tests anyway).
This commit also renames the existing patch to follow the patch naming
convention, and get a reliable ordering when applying patches.
Fixes:
http://autobuild.buildroot.org/results/806/8064092cdbac85fbf4322429d29d5d11dc51860f/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libcgi always builds both the shared and static library, which doesn't
work on architecture that don't support shared library at all, such as
Blackfin with the FLAT format. libcgi uses autoconf, but not automake,
and the Makefile is not of the highest possible quality, so this
commit fixes the problem by introducing a "STATIC" variable that can
be set from the environment. When set to a non-empty value, the
Makefile assumes it should only build the static version of the
library.
Note that this package is in desperate need of some care: there is one
single patch that mixes several changes together, it doesn't have a
description or a Signed-off-by line, and there is now a github project
for libcgi at https://github.com/rafaelsteil/libcgi/ that has the same
fixes.
However, for the purpose of the master branch, we're doing the most
minimal fix possible, by just adding this STATIC variable.
Fixes:
http://autobuild.buildroot.net/results/625/625105bcaf26345f422b225787fc19611b65cd57/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable when using a uclibc version before 0.9.33 since dn_comp
function support was added in this version. Also disabling on AVR32
since any AVR32 toolchain will be based on a uclibc version older
than 0.9.33 (for using an external AVR32 toolchain).
[Peter: use dn_comp instead of __dn_comp]
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using a relative path for O=... has limitations, since it is interpreted
relative to the Buildroot tree, and thus may lead to unexpected results.
For example, running this:
make -C buildroot O=my-O
will not create my-O in the current working directory, but as a
sub-directory of the Buildroot tree, here in buildroot/my-O
Explain this in the manual (as is similarly done for BR2_EXTERNAL).
Also add a note that $(O) will be created if missing.
Also change O=.. and -C .. to O=<...> and -C <...> to make it explicit
this is an ellipse, not a relative path.
Reported-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Although it is possible to use relative paths, there are a few pitfalls
when doing so.
To avoid confusion for a (newcoming) user, use absolute paths in the
manual (as is done in examples for $(O)), since it is guaranteed to be
working without corner cases.
[Peter: s/relatively/relative/ as suggested by Thomas]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using a relative path for BR2_EXTERNAL, and using an external defconfig,
such as in (from a Buildroot top-dir):
make O=.. BR2_EXTERNAL=.. foo_defconfig
is broken. It is unclear why the %_defconfig rule recurses in that case.
This patch internaly makes BR2_EXTERNAL canonical (ie. makes it an absolute
path), and checks the directory exists.
[Peter: s/relatively/relative/ as suggested by Thomas]
Reported-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mpg123 needs MMU because the application that is built with this
package uses fork. Currently it is difficult to only build the
libraries for mpg123 so disabling the package all together when there
is no MMU support.
Note: mpg123 is an optional dependency of mpd but mpd already requires
BR2_USE_MMU so there is no need to add this as a dependency.
Fixes:
http://autobuild.buildroot.net/results/5b0/5b053af566dd122ae7e58893e77d5d5f3070fb9e
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 87492d244a ("aiccu: disable
for uClibc 0.9.31/0.9.32"), we made sure it was not possible to select
aiccu with uClibc 0.9.31 and 0.9.32, because they lack dn_skipname().
However, we still have the problem that external AVR32 toolchains can
select aiccu, which causes build failures. Therefore, we also disallow
aiccu on AVR32 altogether. We keep the 0.9.31/0.9.32 exclusions,
because if they are used on other architectures, it would also fail
due to the lack of dn_skipname().
Fixes:
http://autobuild.buildroot.org/results/a24/a2490d434152625d9208615d83f4c5d6daea79d0/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Evas has an optional mechanism to do asynchronous preloading of
images. This mechanism is optional, and in commit
b6d92bf415 ("libevas: async image
preload support needs threads support in toolchain"), Peter made sure
to disable the asychronous preloading when no thread support was
available.
Unfortunately, it seems like disabling the asynchronous loading is
rarely used, and it in facts fails to build: a member of structure is
not present when asynchronous preloading is disabled, but the code
continues to use it.
Since the fix is not obvious, and all this mechanism seems to have
changed completely in EFL 1.8.x, and we probably don't care much about
EFL without threads, this commit adds a dependency of libevas on
thread support. Consequently, it also reverts commit
b6d92bf415 which is no longer necessary.
Of course, this commit propagates this additional dependency to the
reverse dependencies of libevas.
Fixes:
http://autobuild.buildroot.org/results/6de/6de90018a9eeb9c495d15046a8b3270eb95a5550//http://autobuild.buildroot.org/results/693/693df99db4ab357b48d427be3a72f6d64dd53065//
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be sure that host-autoconf dependency is already built move the
call to autogen.sh from SDL_POST_PATCH_HOOKS to SDL_PRE_CONFIGURE_HOOKS.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ramfs (which is used instead of tmpfs if CONFIG_SHMEM isn't enabled in the
kernel configuration), defaults to mode 0755 instead of 01777 like tmpfs
uses.
/tmp should be world writable and sticky, so explictly enforce the mode so
ramfs users gets it correct instead of relying on the defaults.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The tvheadend configure script fails to correctly handle spaces in any of
the options passed to it. If ccache is used the configure script fails to
handle the space in the --cc option and errors. Also the --cflags option
fails to handle multiple entries and only uses the first one. This patch
simple removes setting the --cc and --cflags options as the configure
script will correctly use the CC and CFLAGS variables already passed in
TARGET_CONFIGURE_OPTS.
Signed-off-by: Martin Bark <martin@barkynet.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
coreutils was not building in the static link case with uClibc, due to
binaries being linked with librt (for timer functions), but not with
libpthread. However, librt uses functions from libpthread, so both
must be specified. This lack of linking against libpthread was caused
by a deficiency in one of the gnulib m4 macro, for which we add a patch.
Fixes:
http://autobuild.buildroot.org/results/bd4/bd4cc779b46e3837e3d6c43c97eaf42fdfc3a288/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pv configure script is somewhat stupid: if it cannot find the host
gettext tool msgfmt, it concludes that gettext is not available, and
provides its own minimal version. Unfortunately, this minimal version
conflicts with the available target gettext. We fix this by ensuring
that host-gettext is built if gettext support is enabled, by adding it
to the dependencies.
Fixes:
http://autobuild.buildroot.org/results/d30/d30db79190f2cf8953751d55a5d34644f60daec4/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
AArch64 does not implement the SYS_open system call, but only the
SYS_openat system call, as should be done for all modern architectures
merged into the Linux kernel. This causes problems when building
libv4l 0.8.9, which are fixed by integrating an upstream patch,
available in a more recent version of libv4l. Backporting the patch is
preferred over bumping libv4l, as libv4l has a fairly large number of
reverse dependencies, and we don't want to break anything that close
to the release.
Note that this commit also renames the existing libv4l-largefile.patch
to libv4l-01-largefile.patch in order to comply with the Buildroot
patch naming scheme, and guarantee the order in which patches are
applied.
Fixes:
http://autobuild.buildroot.org/results/ed6/ed66792e332ee0256a17f98cbe21dfcfe6e8743b/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 52eeb04c76 ('libsepol: fix
static-only library build') I forgot to git add the changes made to
the libsepol.mk file itself. Those changes are needed to actually pass
STATIC=<something> when building static libraries only.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
icu does not recognize 'uclinux' as a supported platform. While making
it recognize uclinux is easy, there is another problem down the road:
icu does very weird things to generate an ELF library containing
static data (libicudata.a), and the generated library being ELF, it is
not compatible with the FLAT binary format expected by uclinux
platforms such as Blackfin in FLAT format.
Therefore, we simply disallow the selection of icu on FLAT
platforms.
Note that adding a dependency on BR2_BINFMT_ELF doesn't work, because
BR2_BINFMT_FDPIC is considered to be separate (even if technically
FDPIC is a derivative of ELF). That's why the dependency we're adding
is "depends on !BR2_BINFMT_FLAT" and not "depends on BR2_BINFMT_ELF".
Fixes:
http://autobuild.buildroot.org/results/b41/b415fed7fae4012bad7d8b53a481bd71bdab716f/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a number of issues. From the changelog:
- Avoid getting stuck in a loop writing huge key files, reported by Bruno
Thomsen
- Avoid crash on exit due to cleaned up keys before last packets are sent,
debugged by Ronald Wahl
- Fix a race condition in rekeying where Dropbear would exit if it received a
still-in-flight packet after initiating rekeying. Reported by Oliver Metz.
This is a longstanding bug but is triggered more easily since 2013.57
- Ensure that generated RSA keys are always exactly the length
requested. Previously Dropbear always generated N+16 or N+15 bit keys.
Thanks to Unit 193
- Fix DROPBEAR_CLI_IMMEDIATE_AUTH mode which saves a network round trip if the
first public key succeeds. Still not enabled by default, needs more
compatibility testing with other implementations.
- Fix signal handlers so that errno is saved, thanks to Erik Ahlén for a patch
and Mark Wickham for independently spotting the same problem.
And at the same time get rid of the TIMEVAL_TO_TIMESPEC as dropbear provides a
fallback implementation if not available (and has done so since 2006).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
3.3.8 support is removed since 334dca61 (kernel-headers: remove deprecated
versions 3.1, 3.3, 3.5), so let's get rid of the patch as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host python always had --disable-unicodedata, regardless of the
corresponding configuration option BR2_PACKAGE_PYTHON_UNICODEDATA.
Since the host python is used to byte-compile python modules, this meant
that such modules could not contain unicode strings. For example, following
statement in a python module:
print u"\N{SOLIDUS}"
would cause the byte-compilation to fail with message:
SyntaxError: ("(unicode error) \\N escapes not supported (can't load
unicodedata module)",
Instead, conditionally disable unicodedata based on
BR2_PACKAGE_PYTHON_UNICODEDATA, also for the host python.
This fixes bug #6542 (https://bugs.busybox.net/show_bug.cgi?id=6542)
Reported-by: Gernot Vormayr <gvormayr@gmail.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Transmission would incorrectly determine the C++ compiler when ccache is
enabled, causing a build with uTP to fail at the configure step.
This patch adds a patch against transmission, fixing the problem.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If BR2_PACKAGE_QT_STATIC is set, qtuio will not build a .so file, but .a.
However, the custom INSTALL_TARGET_CMDS and INSTALL_STAGING_CMDS
unconditionally attempted to copy the .so file.
This commit checks the requested Qt library type and copies the right
library for each case, taking into account that the static .a file does not
need to be copied to the target directory.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The devicetree data for BeagleBone Black is the am335x–boneblack.dts file
(includes "am33xx.dtsi" and "am335x-bone-common.dtsi")
BeagleBone White uses the am335x-bone.dts file.
Signed-off-by: Marcelo Gutiérrez <kuyurix@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If Lua support is requested in VLC, its configure script tries to find the
luac byte compiler, which fails if host-lua is not yet built.
This can be easily reproduced by setting a minimal config with vlc and Lua
enabled, and running: 'make clean toolchain vlc'. Final output is:
checking for LUA... no
configure: WARNING: Package lua5.2 was not found in the pkg-config search path.
Perhaps you should add the directory containing `lua5.2.pc'
to the PKG_CONFIG_PATH environment variable
No package 'lua5.2' found, trying lua 5.1 instead
checking for LUA... no
configure: WARNING: Package lua5.1 was not found in the pkg-config search path.
Perhaps you should add the directory containing `lua5.1.pc'
to the PKG_CONFIG_PATH environment variable
No package 'lua5.1' found, trying lua >= 5.1 instead
checking for LUA... yes
checking for luac... no
configure: error: Could not find the LUA byte compiler.
make: *** [<buildroot>/output/build/vlc-2.1.2/.stamp_configured] Error 1
Fix this problem by setting host-lua as a dependency to vlc.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It does not make much sense enabling opencv without its core module.
This configuration leads to build nothing (since all modules depend on
the core one), but install the configuration files (*.pc and *.cmake)
anyway.
This absurd situation may break the build-system of other packages
that would correctly find the *.pc (but does not check for the modules
they actually use), but would not build because of missing headers and
libraries.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
jimtcl tries to use 'ccache' (a non-buildroot host version) which may not
exist on the host system. If ccache is enabled in buildroot, the compiler
used by jimtcl is:
ccache <buildroot>/.../ccache <buildroot>/.../<tuple>-gcc
If ccache is not present on the host, this results in the build error:
ccache <buildroot>/.../ccache <buildroot>/.../<tuple>-gcc
-D_GNU_SOURCE -Wall -I. -fpic -pipe -Os -c -o jim-subcmd.o jim-subcmd.c
make[1]: ccache: Command not found
This patch passes 'CCACHE=none' to the 'configure' script, disabling the
internal handling of ccache, so that ccache can be transparently passed
through CC.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The three typical packages that use .config files in buildroot copy the
config file at different times in the build process:
busybox copies its .config from the post-extract hook.
linux copies its .config in the configure_cmds.
uclibc copies its .config from the post-patch hook.
Copying the .config file from the configure step is the only way to properly
support an OVERRIDE_SRCDIR that does not yet have the .config file, because
the extract and patch steps are skipped in that case.
In a previous patch, the situation was already fixed for busybox. This patch
applies the same fix to uclibc: copy the config file from the configure
step, as linux is doing.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The three typical packages that use .config files in buildroot copy the
config file at different times in the build process:
busybox copies its .config from the post-extract hook.
linux copies its .config in the configure_cmds.
uclibc copies its .config from the post-patch hook.
Copying the .config file from the configure step is the only way to properly
support an OVERRIDE_SRCDIR that does not yet have the .config file, because
the extract and patch steps are skipped in that case.
For example, when setting a BUSYBOX_OVERRIDE_SRCDIR to a cleanly extracted
busybox tarball:
$ make busybox-dirclean busybox
rm -Rf [..]/output/build/busybox-custom
>>> busybox custom Syncing from source dir
>>> /home/tdescham/repo/contrib/busybox-1.21.1
rsync -au --exclude .svn --exclude .git --exclude .hg --exclude .bzr
--exclude CVS /home/tdescham/repo/contrib/busybox-1.21.1/
[..]/output/build/busybox-custom
>>> busybox custom Configuring
/bin/sed -i -e "/\\<CONFIG_NOMMU\\>/d"
[..]/output/build/busybox-custom/.config
/bin/sed: can't read [..]/output/build/busybox-custom/.config:
No such file or directory
make: *** [[..]/output/build/busybox-custom/.stamp_configured] Error 2
This patch modifies busybox.mk to copy the config file from the configure
step instead, as linux is doing, and fixing the described scenario.
This fixes bug #5030: https://bugs.busybox.net/show_bug.cgi?id=5030
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the build of systemd is broken with the internal toolchain
backend, because we have uClibc patches that add support for
execvpe(), but we also have a patch for systemd that adds execvpe(),
which was added when the internal uClibc didn't support execvpe().
However, simply dropping the patch is not a solution, as it would
break the build of systemd with any other uClibc than the ones built
with Buildroot. For example, a Crosstool-NG uClibc toolchain would
fail.
Beyond this execvpe() problem, there are also other problems that
prevented systemd from being built with unpatched uClibc.
This patch does the following:
* Add sequence numbers of systemd patches.
* Regenerate them to avoid fuzz.
* Improve the uClibc compatibility patch so that it:
- Detects whether execvpe() is available or not, and if not
available provide an implementation.
- Detects if dup3() is available or not, and if not available
provide an implementation.
- Detects if MSG_CMSG_CLOEXEC is defined or not, and if not, define
it to the appropriate value.
This has been tested with uClibc internal toolchain, uClibc external
toolchain built with Buildroot, uClibc external toolchain built with
Crosstool-NG, and glibc external toolchain.
Fixes bug #6776.
Fixes:
http://autobuild.buildroot.org/results/591/591c6055430da334bd1e46e7d01497add45da837/build-end.loghttp://autobuild.buildroot.org/results/e58/e5851939d2837d4e35a4c1d9ca6df3c93ed5a34b/build-end.loghttp://autobuild.buildroot.org/results/92e/92e4c40c69a3feb4046b2fe5a0d8c69d5a44a157/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable elfutils for avr32, because:
- elfutils uses canonicalize_file_name, which came after uClibc-0.9.31.
- avr32 uses a toolchain with uClibc-0.9.31
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch that commit a728e2fe35 (coreutils: fix build against uclibc
snapshot) adds mentions the wrong coreutils version in its description.
Also fix the sign-of tag while at it.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The xtensa port uses __xtensa_libgcc_window_spill in libgcc to implement
__builtin_frame_address. This symbol is local/hidden in libgcc. This is not a
problem when linking against static libgcc. But g++ defaults to
-shared-libgcc, thus breaking link against C++ shared libraries that are using
__builtin_frame_address as follows:
ld: test: hidden symbol `__xtensa_libgcc_window_spill' in .../libgcc.a(lib2funcs.o) is referenced by DSO
Add upstream patches that make libgcc_s.so a linker script that links in
unresolved symbols from the static libgcc, similar to the ARM and PowerPC
ports.
Fixes:
http://autobuild.buildroot.net/results/e2d/e2d1a763fa86b8575e2e48e6d73c018175f43e7c/
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported on IRC, our default busybox configuration doesn't support SHA
encoded passwords, breaking login if enabled under system configuration.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-02-11 14:59:16 +01:00
170 changed files with 2047 additions and 416 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
