zyre: remove unnecessary autoreconf options

The default $(PKG)_AUTORECONF_OPT already includes the -i and -f flags,
so there is no point in specifying these in the package makefile. Further,
the -v option to autoreconf is not required.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Config.in

@@ -18,6 +18,11 @@ config BR2_EXTERNAL
 	string
 	option env="BR2_EXTERNAL"
 
+# Hidden boolean selected by packages in need of Java in order to build
+# (example: xbmc)
+config BR2_NEEDS_HOST_JAVA
+	bool
+
 # Hidden boolean selected by pre-built packages for x86, when they
 # need to run on x86-64 machines (example: pre-built external
 # toolchains, binary tools like SAM-BA, etc.).
@@ -225,6 +230,17 @@ config BR2_LUAROCKS_MIRROR
 
 	  See http://luarocks.org
 
+config BR2_CPAN_MIRROR
+	string "CPAN mirror (Perl packages)"
+	default "http://search.cpan.org/CPAN"
+	help
+	  CPAN (Comprehensive Perl Archive Network) is a repository
+	  of Perl packages. It has multiple software mirrors scattered
+	  around the world. This option allows you to select a mirror.
+
+	  The list of mirrors is available at:
+	  http://search.cpan.org/mirror
+
 endmenu
 
 config BR2_JLEVEL
@@ -470,7 +486,7 @@ config BR2_PREFER_STATIC_LIB
 
 config BR2_PACKAGE_OVERRIDE_FILE
 	string "location of a package override file"
-	default "$(TOPDIR)/local.mk"
+	default "$(CONFIG_DIR)/local.mk"
 	help
 	  A package override file is a short makefile that contains
 	  variable definitions of the form <pkg>_OVERRIDE_SRCDIR,

Config.in.legacy

@@ -98,6 +98,73 @@ comment "build, or run, in unpredictable ways.               "
 comment "----------------------------------------------------"
 endif
 
+###############################################################################
+comment "Legacy options removed in 2014.05"
+
+config BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
+	bool "/dev management by udev removed"
+	select BR2_LEGACY
+	help
+	  The 'udev' package has been converted to a virtual package.
+	  The providers for this feature are: 'eudev', 'systemd'.
+
+	  Therefore, if you are not using 'systemd' as init system, you
+	  must choose 'Dynamic using eudev' in the '/dev management'
+	  menu to get the same behaviour as in your old configuration.
+
+	  If you are using 'systemd', its internal implementation of
+	  'udev' will be used automatically.
+
+	  You must also check the packages depending on 'udev' are still
+	  selected.
+
+config BR2_PACKAGE_UDEV
+	bool "udev is now a virtual package"
+	select BR2_LEGACY
+	select BR2_PACKAGE_HAS_UDEV
+	help
+	  The 'udev' package has been converted to a virtual package.
+	  The providers for this feature are: 'eudev', 'systemd'.
+
+	  Your old configuration refers to packages depending on 'udev',
+	  either for build or at runtime.
+
+	  Check that a 'udev' provider is selected. If you are not using
+	  'systemd' as init system, 'eudev' should be selected, which is
+	  the case if '/dev management' is set to 'Dynamic using eudev'.
+
+	  If you are using 'systemd', its internal implementation of 'udev'
+	  is used.
+
+config BR2_PACKAGE_UDEV_RULES_GEN
+	bool "udev rules generation handled by provider"
+	select BR2_LEGACY
+	select BR2_PACKAGE_EUDEV if !BR2_INIT_SYSTEMD
+	select BR2_PACKAGE_EUDEV_RULES_GEN if !BR2_INIT_SYSTEMD
+	help
+	  The 'udev' package has been converted to a virtual package.
+	  The providers for this feature are: 'eudev', 'systemd'.
+
+	  If you are not using 'systemd' as init system, udev rules
+	  generation will be handled by 'eudev'. Check that
+	  '/dev management' is set to 'Dynamic using eudev' to get
+	  the same behaviour as in your old configuration.
+
+	  If you are using 'systemd', it internal implementation of 'udev'
+	  will generate the rules.
+
+config BR2_PACKAGE_UDEV_ALL_EXTRAS
+	bool "udev extras removed"
+	select BR2_LEGACY
+	help
+	  The 'udev' package has been converted to a virtual package.
+	  The providers for this feature are: 'eudev', 'systemd'.
+
+	  The option to enable the extra features of 'udev' (gudev, ...)
+	  has been removed. These features are automatically enabled in
+	  the 'udev' providers if the dependencies are selected. For
+	  example, selecting 'libglib2' will trigger the build of gudev.
+
 ###############################################################################
 comment "Legacy options removed in 2014.02"
 

Makefile

@@ -24,7 +24,7 @@
 #--------------------------------------------------------------
 
 # Set and export the version string
-export BR2_VERSION:=2014.02-rc1
+export BR2_VERSION:=2014.05-git
 
 # Check for minimal make version (note: this check will break at make 10.x)
 MIN_MAKE_VERSION=3.81
@@ -42,7 +42,20 @@ export HOSTARCH := $(shell uname -m | \
 	    -e s/macppc/powerpc/\
 	    -e s/sh.*/sh/)
 
-# This top-level Makefile can *not* be executed in parallel
+# Parallel execution of this Makefile is disabled because it changes
+# the packages building order, that can be a problem for two reasons:
+# - If a package has an unspecified optional dependency and that
+#   dependency is present when the package is built, it is used,
+#   otherwise it isn't (but compilation happily proceeds) so the end
+#   result will differ if the order is swapped due to parallel
+#   building.
+# - Also changing the building order can be a problem if two packages
+#   manipulate the same file in the target directory.
+#
+# Taking into account the above considerations, if you still want to execute
+# this top-level Makefile in parallel comment the ".NOTPARALLEL" line and
+# build using the following command:
+#	make BR2_JLEVEL= -j$((`getconf _NPROCESSORS_ONLN`+1))
 .NOTPARALLEL:
 
 # absolute path
@@ -377,8 +390,6 @@ include system/system.mk
 
 include $(BR2_EXTERNAL)/external.mk
 
-TARGETS+=target-finalize
-
 ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
 TARGETS+=target-purgelocales
 endif
@@ -395,11 +406,8 @@ endif
 
 include fs/common.mk
 
-TARGETS+=target-post-image
-
 TARGETS_SOURCE:=$(patsubst %,%-source,$(TARGETS) $(BASE_TARGETS))
 TARGETS_DIRCLEAN:=$(patsubst %,%-dirclean,$(TARGETS))
-TARGETS_ALL:=$(patsubst %,__real_tgt_%,$(TARGETS))
 
 # host-* dependencies have to be handled specially, as those aren't
 # visible in Kconfig and hence not added to a variable like TARGETS.
@@ -422,9 +430,6 @@ HOST_SOURCE += $(addsuffix -source,$(sort $(TARGETS_HOST_DEPS) $(HOST_DEPS)))
 TARGETS_LEGAL_INFO:=$(patsubst %,%-legal-info,\
 		$(TARGETS) $(BASE_TARGETS) $(TARGETS_HOST_DEPS) $(HOST_DEPS))))
 
-# all targets depend on the crosscompiler and it's prerequisites
-$(TARGETS_ALL): __real_tgt_%: $(BASE_TARGETS) %
-
 dirs: $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
 	$(HOST_DIR) $(BINARIES_DIR) $(STAMP_DIR)
 
@@ -433,11 +438,16 @@ $(BUILD_DIR)/buildroot-config/auto.conf: $(BR2_CONFIG)
 
 prepare: $(BUILD_DIR)/buildroot-config/auto.conf
 
-world: $(BASE_TARGETS) $(TARGETS_ALL)
+# Add base dependencies to all targets even on those not based on the
+# package framework.
+$(TARGETS): dirs prepare dependencies
+
+world: target-post-image
 
 .PHONY: all world toolchain dirs clean distclean source outputmakefile \
 	legal-info legal-info-prepare legal-info-clean printvars \
-	$(BASE_TARGETS) $(TARGETS) $(TARGETS_ALL) \
+	target-finalize target-post-image \
+	$(BASE_TARGETS) $(TARGETS) $(TARGETS_ROOTFS) \
 	$(TARGETS_DIRCLEAN) $(TARGETS_SOURCE) $(TARGETS_LEGAL_INFO) \
 	$(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
 	$(HOST_DIR) $(BINARIES_DIR) $(STAMP_DIR)
@@ -497,7 +507,9 @@ endif
 STRIP_FIND_CMD += -type f \( -perm /111 -o -name '*.so*' \)
 STRIP_FIND_CMD += -not \( $(call findfileclauses,libpthread*.so* $(call qstrip,$(BR2_STRIP_EXCLUDE_FILES))) \) -print
 
-target-finalize:
+$(TARGETS_ROOTFS): target-finalize
+
+target-finalize: $(TARGETS)
 	rm -rf $(TARGET_DIR)/usr/include $(TARGET_DIR)/usr/share/aclocal \
 		$(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/pkgconfig \
 		$(TARGET_DIR)/usr/lib/cmake $(TARGET_DIR)/usr/share/cmake
@@ -512,10 +524,10 @@ endif
 	rm -rf $(TARGET_DIR)/usr/doc $(TARGET_DIR)/usr/share/doc
 	rm -rf $(TARGET_DIR)/usr/share/gtk-doc
 	-rmdir $(TARGET_DIR)/usr/share 2>/dev/null
-ifeq ($(BR2_PACKAGE_PYTHON_PY_ONLY),y)
+ifeq ($(BR2_PACKAGE_PYTHON_PY_ONLY)$(BR2_PACKAGE_PYTHON3_PY_ONLY),y)
 	find $(TARGET_DIR)/usr/lib/ -name '*.pyc' -print0 | xargs -0 rm -f
 endif
-ifeq ($(BR2_PACKAGE_PYTHON_PYC_ONLY),y)
+ifeq ($(BR2_PACKAGE_PYTHON_PYC_ONLY)$(BR2_PACKAGE_PYTHON3_PYC_ONLY),y)
 	find $(TARGET_DIR)/usr/lib/ -name '*.py' -print0 | xargs -0 rm -f
 endif
 	rm -rf $(TARGET_DIR)/usr/lib/luarocks
@@ -602,7 +614,7 @@ target-generatelocales: host-localedef
 	done
 endif
 
-target-post-image:
+target-post-image: $(TARGETS_ROOTFS)
 	@$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_IMAGE_SCRIPT)), \
 		$(call MESSAGE,"Executing post-image script $(s)"); \
 		$(USER_HOOKS_EXTRA_ENV) $(s) $(BINARIES_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
@@ -639,7 +651,7 @@ legal-info: dirs legal-info-clean legal-info-prepare $(TARGETS_LEGAL_INFO) \
 	@rm -f $(LEGAL_WARNINGS)
 
 show-targets:
-	@echo $(TARGETS)
+	@echo $(TARGETS) $(TARGETS_ROOTFS)
 
 graph-build: $(O)/build/build-time.log
 	@install -d $(O)/graphs

board/minnowboard/grub.cfg

@@ -0,0 +1,6 @@
+set default="0"
+set timeout="5"
+
+menuentry "Buildroot" {
+	linux /bzImage root=/dev/mmcblk0p2 rootwait console=ttyPCH0,115200
+}

board/minnowboard/linux-3.8.config

@@ -0,0 +1,172 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_RCU_FANOUT=32
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_MEMCG_KMEM=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+CONFIG_NAMESPACES=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SMP=y
+CONFIG_MATOM=y
+CONFIG_SCHED_SMT=y
+CONFIG_PREEMPT=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_CHECK_BIOS_CORRUPTION=y
+# CONFIG_MTRR_SANITIZER is not set
+CONFIG_EFI=y
+CONFIG_EFI_STUB=y
+CONFIG_HZ_1000=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_ADVANCED_DEBUG=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_X86_ACPI_CPUFREQ=y
+CONFIG_INTEL_IDLE=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_PCH_PHUB=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_NETCONSOLE=y
+CONFIG_TUN=m
+CONFIG_PCH_GBE=m
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO_POLLED=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_PCH_UART=y
+CONFIG_SERIAL_PCH_UART_CONSOLE=y
+CONFIG_GEN_RTC=y
+CONFIG_GEN_RTC_X=y
+CONFIG_HPET=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_EG20T=m
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_TOPCLIFF_PCH=m
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_SCH=y
+CONFIG_GPIO_PCH=y
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_AGP=m
+CONFIG_DRM=m
+CONFIG_FB=y
+CONFIG_FB_EFI=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_HDA_INTEL=m
+CONFIG_USB=y
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=m
+CONFIG_USB_EG20T=m
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_DMADEVICES=y
+CONFIG_PCH_DMA=y
+CONFIG_MINNOWBOARD=y
+CONFIG_MINNOWBOARD_GPIO=m
+CONFIG_MINNOWBOARD_KEYS=m
+CONFIG_EFI_VARS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FANOTIFY=y
+CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
+CONFIG_ISO9660_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_FRAME_WARN=1024
+CONFIG_TIMER_STATS=y
+CONFIG_LATENCYTOP=y
+CONFIG_BLK_DEV_IO_TRACE=y

board/minnowboard/post-build.sh

@@ -0,0 +1,2 @@
+#!/bin/sh
+cp board/minnowboard/grub.cfg ${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg

board/minnowboard/readme.txt

@@ -0,0 +1,40 @@
+Prepare the SD card for the Minnow Board
+========================================
+
+ 1. Partition the SD card with a GPT partition table
+
+    sudo cgdisk /dev/mmcblk0
+
+    Create two partitions:
+
+     a) First partition of a few dozens of megabytes, which will be
+        used to store the bootloader and the kernel image. Type must
+        be EF00 (EFI partition).
+
+     b) Second partition of any size, which will be used to store the
+        root filesystem. Type must be 8300 (Linux filesystem)
+
+ 2. Prepare the boot partition
+
+    We will format it, mount it, copy the EFI data generated by
+    Buildroot, and the kernel image.
+
+    sudo mkfs.vfat -F 32 -n boot /dev/mmcblk0p1
+    sudo mount /dev/mmcblk0p1 /mnt
+    sudo cp -a output/images/efi-part/* /mnt/
+    sudo cp output/images/bzImage /mnt/
+    sudo umount /mnt
+
+ 3. Prepare the root partition
+
+    We will format it, mount it, and extract the root filesystem.
+
+    sudo mkfs.ext3 -L root /dev/mmcblk0p2
+    sudo mount /dev/mmcblk0p2 /mnt
+    sudo tar -C /mnt -xf output/images/rootfs.tar
+    sudo umount /mnt
+
+ 4. Enjoy
+
+Additional informations about this board can be found at
+http://www.minnowboard.org/.

boot/Config.in

@@ -6,6 +6,8 @@ source "boot/at91dataflashboot/Config.in"
 source "boot/barebox/Config.in"
 source "boot/boot-wrapper-aarch64/Config.in"
 source "boot/grub/Config.in"
+source "boot/grub2/Config.in"
+source "boot/gummiboot/Config.in"
 source "boot/lpc32xxcdl/Config.in"
 source "boot/mxs-bootlets/Config.in"
 source "boot/syslinux/Config.in"

boot/grub2/Config.in

@@ -0,0 +1,120 @@
+config BR2_TARGET_GRUB2
+	bool "grub2"
+	depends on BR2_i386 || BR2_x86_64
+	help
+	  GNU GRUB is a Multiboot boot loader. It was derived from
+	  GRUB, the GRand Unified Bootloader, which was originally
+	  designed and implemented by Erich Stefan Boleyn. GRUB 2 has
+	  replaced what was formerly known as GRUB (i.e. version
+	  0.9x), which has, in turn, become GRUB Legacy.
+
+	  Amongst others, GRUB2 offers EFI support, which GRUB Legacy
+	  doesn't provide.
+
+	  Notes on using Grub2 for BIOS-based platforms
+	  =============================================
+
+	  1. Create a disk image
+	     dd if=/dev/zero of=disk.img bs=1M count=32
+	  2. Partition it (either legacy or GPT style partitions work)
+	     cfdisk disk.img
+	      - Create one partition, type Linux, for the root
+		filesystem. The only constraint is to make sure there
+		is enough free space *before* the first partition to
+		store Grub2. Leaving 1 MB of free space is safe.
+	  3. Setup loop device and loop partitions
+	     sudo losetup -f disk.img
+	     sudo partx -a disk.img
+	  4. Prepare the root partition
+	     sudo mkfs.ext3 -L root /dev/loop0p1
+	     sudo mount /dev/loop0p1 /mnt
+	     sudo tar -C /mnt -xf output/images/rootfs.tar
+	     sudo umount /mnt
+	  5. Install Grub2
+	     ./output/host/usr/sbin/grub-bios-setup \
+			-b ./output/host/usr/lib/grub/i386-pc/boot.img \
+			-c ./output/images/grub.img -d . /dev/loop0
+	  6. Your disk.img is ready!
+
+	  To test your BIOS image in Qemu:
+
+	  qemu-system-{i386,x86-64} -hda disk.img
+
+	  Notes on using Grub2 for EFI-based platforms
+	  ============================================
+
+	  1. Create a disk image
+	     dd if=/dev/zero of=disk.img bs=1M count=32
+	  2. Partition it with GPT partitions
+	     cgdisk disk.img
+	      - Create a first partition, type EF00, for the
+		bootloader and kernel image
+	      - Create a second partition, type 8300, for the root
+		filesystem.
+	  3. Setup loop device and loop partitions
+	     sudo losetup -f disk.img
+	     sudo partx -a /dev/loop0
+	  4. Prepare the boot partition
+	     sudo mkfs.vfat -n boot /dev/loop0p1
+	     sudo mount /dev/loop0p1 /mnt
+	     sudo cp -a output/images/efi-part/* /mnt/
+	     sudo cp output/images/bzImage /mnt/
+	     sudo umount /mnt
+	  5. Prepare the root partition
+	     sudo mkfs.ext3 -L root /dev/loop0p2
+	     sudo mount /dev/loop0p2 /mnt
+	     sudo tar -C /mnt -xf output/images/rootfs.tar
+	     sudo umount /mnt
+	  6  Cleanup loop device
+	     sudo partx -d /dev/loop0
+	     sudo losetup -d /dev/loop0
+	  7. Your disk.img is ready!
+
+	  To test your EFI image in Qemu:
+
+	  1. Download the EFI BIOS for Qemu
+	     Version IA32 or X64 depending on the chosen Grub2
+	     platform (i386-efi vs. x86-64-efi)
+	     http://sourceforge.net/projects/edk2/files/OVMF/
+	  2. Extract, and rename OVMF.fd to bios.bin and
+	     CirrusLogic5446.rom to vgabios-cirrus.bin.
+	  3. qemu-system-{i386,x86-64} -L ovmf-dir/ -hda disk.img
+          4. Make sure to pass pci=nocrs to the kernel command line,
+             to workaround a bug in the EFI BIOS regarding the
+             EFI framebuffer.
+
+	  http://www.gnu.org/software/grub/
+
+if BR2_TARGET_GRUB2
+
+choice
+	prompt "Platform"
+
+config BR2_TARGET_GRUB2_I386_PC
+	bool "i386-pc"
+	help
+	  Select this option if the platform you're targetting is a
+	  x86 or x86-64 legacy BIOS based platform.
+
+config BR2_TARGET_GRUB2_I386_EFI
+	bool "i386-efi"
+	help
+	  Select this option if the platform you're targetting has a
+	  32 bits EFI BIOS. Note that some x86-64 platforms use a 32
+	  bits EFI BIOS, and this option should be used in this case.
+
+config BR2_TARGET_GRUB2_X86_64_EFI
+	bool "x86-64-efi"
+	help
+	  Select this option if the platform you're targetting has a
+	  64 bits EFI BIOS.
+
+endchoice
+
+config BR2_TARGET_GRUB2_BUILTIN_MODULES
+	string "builtin modules"
+	default "boot linux ext2 fat part_msdos part_gpt normal biosdisk" if BR2_TARGET_GRUB2_I386_PC
+	default "boot linux ext2 fat part_msdos part_gpt normal efi_gop" \
+		if BR2_TARGET_GRUB2_I386_EFI || BR2_TARGET_GRUB2_X86_64_EFI
+
+endif # BR2_TARGET_GRUB2

boot/grub2/grub.cfg

@@ -0,0 +1,6 @@
+set default="0"
+set timeout="5"
+
+menuentry "Buildroot" {
+	linux /bzImage root=/dev/sda1 console=tty1
+}

boot/grub2/grub2-remove-gets.patch

@@ -0,0 +1,21 @@
+ISO C11 removes the specification of gets() from the C language, eglibc 2.16+ removed it
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+
+Upstream-Status: Pending
+Index: grub-1.99/grub-core/gnulib/stdio.in.h
+===================================================================
+--- grub-1.99.orig/grub-core/gnulib/stdio.in.h	2010-12-01 06:45:43.000000000 -0800
++++ grub-1.99/grub-core/gnulib/stdio.in.h	2012-07-04 12:25:02.057099107 -0700
+@@ -140,8 +140,10 @@
+ /* It is very rare that the developer ever has full control of stdin,
+    so any use of gets warrants an unconditional warning.  Assume it is
+    always declared, since it is required by C89.  */
++#if defined gets
+ #undef gets
+ _GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead");
++#endif
+ 
+ #if @GNULIB_FOPEN@
+ # if @REPLACE_FOPEN@

boot/grub2/grub2.mk

@@ -0,0 +1,88 @@
+################################################################################
+#
+# grub2
+#
+################################################################################
+
+GRUB2_VERSION = 2.00
+GRUB2_SITE = $(BR2_GNU_MIRROR)/grub/
+GRUB2_SOURCE = grub-$(GRUB2_VERSION).tar.xz
+GRUB2_LICENSE = GPLv3+
+GRUB2_LICENSE_FILES = COPYING
+GRUB2_DEPENDENCIES = host-bison host-flex
+
+ifeq ($(BR2_TARGET_GRUB2_I386_PC),y)
+GRUB2_IMAGE = $(BINARIES_DIR)/grub.img
+GRUB2_CFG = $(TARGET_DIR)/boot/grub/grub.cfg
+GRUB2_TUPLE = i386-pc
+GRUB2_TARGET = i386
+GRUB2_PLATFORM = pc
+else ifeq ($(BR2_TARGET_GRUB2_I386_EFI),y)
+GRUB2_IMAGE = $(BINARIES_DIR)/efi-part/EFI/BOOT/bootia32.efi
+GRUB2_CFG = $(BINARIES_DIR)/efi-part/EFI/BOOT/grub.cfg
+GRUB2_PREFIX = /EFI/BOOT
+GRUB2_TUPLE = i386-efi
+GRUB2_TARGET = i386
+GRUB2_PLATFORM = efi
+else ifeq ($(BR2_TARGET_GRUB2_X86_64_EFI),y)
+GRUB2_IMAGE = $(BINARIES_DIR)/efi-part/EFI/BOOT/bootx64.efi
+GRUB2_CFG = $(BINARIES_DIR)/efi-part/EFI/BOOT/grub.cfg
+GRUB2_PREFIX = /EFI/BOOT
+GRUB2_TUPLE = x86_64-efi
+GRUB2_TARGET = x86_64
+GRUB2_PLATFORM = efi
+endif
+
+GRUB2_BUILTIN_MODULES = $(call qstrip,$(BR2_TARGET_GRUB2_BUILTIN_MODULES))
+
+# Grub2 is kind of special: it considers CC, LD and so on to be the
+# tools to build the native tools (i.e to be executed on the build
+# machine), and uses TARGET_CC, TARGET_CFLAGS, TARGET_CPPFLAGS to
+# build the bootloader itself.
+
+GRUB2_CONF_ENV = \
+	$(HOST_CONFIGURE_OPTS) \
+	CPP="$(HOSTCC) -E" \
+	TARGET_CC="$(TARGET_CC)" \
+	TARGET_CFLAGS="$(TARGET_CFLAGS)" \
+	TARGET_CPPFLAGS="$(TARGET_CPPFLAGS)"
+
+GRUB2_CONF_OPT = \
+	--target=$(GRUB2_TARGET) \
+	--with-platform=$(GRUB2_PLATFORM) \
+	--disable-grub-mkfont \
+	--enable-efiemu=no \
+	--enable-liblzma=no \
+	--enable-device-mapper=no \
+	--enable-libzfs=no \
+	--disable-werror
+
+# We don't want all the native tools and Grub2 modules to be installed
+# in the target. So we in fact install everything into the host
+# directory, and the image generation process (below) will use the
+# grub-mkimage tool and Grub2 modules from the host directory.
+
+GRUB2_INSTALL_TARGET_OPT = DESTDIR=$(HOST_DIR) install
+
+define GRUB2_IMAGE_INSTALLATION
+	mkdir -p $(dir $(GRUB2_IMAGE))
+	$(HOST_DIR)/usr/bin/grub-mkimage \
+		-d $(HOST_DIR)/usr/lib/grub/$(GRUB2_TUPLE) \
+		-O $(GRUB2_TUPLE) \
+		-o $(GRUB2_IMAGE) \
+		$(if $(GRUB2_PREFIX),-p $(GRUB2_PREFIX)) \
+		$(GRUB2_BUILTIN_MODULES)
+	mkdir -p $(dir $(GRUB2_CFG))
+	$(INSTALL) -D -m 0644 boot/grub2/grub.cfg $(GRUB2_CFG)
+endef
+GRUB2_POST_INSTALL_TARGET_HOOKS += GRUB2_IMAGE_INSTALLATION
+
+ifeq ($(GRUB2_PLATFORM),efi)
+define GRUB2_EFI_STARTUP_NSH
+	echo $(notdir $(GRUB2_IMAGE)) > \
+		$(BINARIES_DIR)/efi-part/startup.nsh
+endef
+GRUB2_POST_INSTALL_TARGET_HOOKS += GRUB2_EFI_STARTUP_NSH
+endif
+
+$(eval $(autotools-package))

boot/gummiboot/Config.in

@@ -0,0 +1,28 @@
+config BR2_TARGET_GUMMIBOOT
+	bool "gummiboot"
+	depends on BR2_i386 || BR2_x86_64
+	select BR2_PACKAGE_GNU_EFI
+	select BR2_PACKAGE_UTIL_LINUX
+	select BR2_PACKAGE_UTIL_LINUX_LIBBLKID
+	depends on BR2_LARGEFILE # util-linux
+	depends on BR2_USE_WCHAR # util-linux
+	help
+	  gummiboot is a simple UEFI boot manager which executes
+	  configured EFI images. The default entry is selected by a
+	  configured pattern (glob) or an on-screen menu.
+
+	  gummiboot operates on the EFI System Partition (ESP)
+	  only. Configuration file fragments, kernels, initrds, other
+	  EFI images need to reside on the ESP. Linux kernels need to
+	  be built with CONFIG_EFI_STUB to be able to be directly
+	  executed as an EFI image.
+
+	  See the Grub2 help text for details on preparing an EFI
+	  capable disk image using Gummiboot: the instructions are
+	  exactly the same, except that the Gummiboot configuration
+	  files will be located in /loader/ inside the EFI partition.
+
+	  http://freedesktop.org/wiki/Software/gummiboot/
+
+comment "gummiboot needs a toolchain w/ largefile, wchar"
+	depends on !(BR2_LARGEFILE && BR2_USE_WCHAR)

boot/gummiboot/buildroot.conf

@@ -0,0 +1,4 @@
+title	Buildroot
+version	1
+linux	/bzImage
+options	console=ttyS0 root=/dev/sda2

boot/gummiboot/gummiboot.mk

@@ -0,0 +1,42 @@
+################################################################################
+#
+# gummiboot
+#
+################################################################################
+
+GUMMIBOOT_SITE = git://anongit.freedesktop.org/gummiboot
+GUMMIBOOT_VERSION = 43
+GUMMIBOOT_LICENSE = LGPLv2.1+
+GUMMIBOOT_LICENSE_FILES = LICENSE
+
+# The git archive does not have the autoconf/automake stuff generated.
+GUMMIBOOT_AUTORECONF = YES
+GUMMIBOOT_DEPENDENCIES = gnu-efi host-pkgconf util-linux
+GUMMIBOOT_INSTALL_TARGET = NO
+GUMMIBOOT_INSTALL_IMAGES = YES
+
+ifeq ($(BR2_i386),y)
+GUMMIBOOT_IMGARCH = ia32
+else ifeq ($(BR2_x86_64),y)
+GUMMIBOOT_IMGARCH = x64
+endif
+
+GUMMIBOOT_CONF_OPT = \
+	--host=$(BR2_ARCH) \
+	--with-efi-libdir=$(STAGING_DIR)/usr/lib \
+	--with-efi-ldsdir=$(STAGING_DIR)/usr/lib \
+	--with-efi-includedir=$(STAGING_DIR)/usr/include \
+	--disable-manpages
+
+define GUMMIBOOT_INSTALL_IMAGES_CMDS
+	$(INSTALL) -D -m 0644 $(@D)/gummiboot$(GUMMIBOOT_IMGARCH).efi \
+		$(BINARIES_DIR)/efi-part/EFI/BOOT/boot$(GUMMIBOOT_IMGARCH).efi
+	echo "boot$(GUMMIBOOT_IMGARCH).efi" > \
+		$(BINARIES_DIR)/efi-part/startup.nsh
+	$(INSTALL) -D -m 0644 boot/gummiboot/loader.conf \
+		$(BINARIES_DIR)/efi-part/loader/loader.conf
+	$(INSTALL) -D -m 0644 boot/gummiboot/buildroot.conf \
+		$(BINARIES_DIR)/efi-part/loader/entries/buildroot.conf
+endef
+
+$(eval $(autotools-package))

boot/gummiboot/loader.conf

@@ -0,0 +1,2 @@
+timeout 3
+default buildroot

configs/minnowboard_defconfig

@@ -0,0 +1,23 @@
+# Architecture
+BR2_x86_64=y
+BR2_x86_atom=y
+
+# Misc
+BR2_TARGET_GENERIC_GETTY_PORT="ttyPCH0"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/minnowboard/post-build.sh"
+
+# Lock to 3.8 headers
+BR2_KERNEL_HEADERS_VERSION=y
+BR2_DEFAULT_KERNEL_VERSION="3.8"
+
+# Linux kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.yoctoproject.org/linux-yocto-3.8"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="ba1587b9b62c801d161897303aa6d22809485f9b"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/minnowboard/linux-3.8.config"
+
+# Bootloader
+BR2_TARGET_GRUB2=y
+BR2_TARGET_GRUB2_I386_EFI=y

docs/manual/adding-packages-directory.txt

@@ -235,7 +235,12 @@ use in the comment.
 
 * thread support
 ** Dependency symbol: +BR2_TOOLCHAIN_HAS_THREADS+
-** Comment string: +threads+
+** Comment string: +threads+ (unless +BR2_TOOLCHAIN_HAS_THREADS_NPTL+
+   is also needed, in which case, specifying only +NPTL+ is sufficient)
+
+* NPTL thread support
+** Dependency symbol: +BR2_TOOLCHAIN_HAS_THREADS_NPTL+
+** Comment string: +NPTL+
 
 * RPC support
 ** Dependency symbol: +BR2_TOOLCHAIN_HAS_NATIVE_RPC+
@@ -273,8 +278,7 @@ foo needs a toolchain w/ featA, featB, featC and a Linux kernel to be built
 Dependencies on udev /dev management
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 If a package needs udev /dev management, it should depend on symbol
-+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV+, and the following comment
-should be added:
++BR2_PACKAGE_HAS_UDEV+, and the following comment should be added:
 
 --------------------------
 foo needs udev /dev management

docs/manual/adding-packages-perl.txt

@@ -0,0 +1,120 @@
+// -*- mode:doc; -*-
+// vim: set syntax=asciidoc:
+
+Infrastructure for Perl/CPAN packages
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+[[perl-package-tutorial]]
+
++perl-package+ tutorial
+^^^^^^^^^^^^^^^^^^^^^^^
+
+First, let's see how to write a +.mk+ file for a Perl/CPAN package,
+with an example :
+
+------------------------
+01: ################################################################################
+02: #
+03: # perl-foo-bar
+04: #
+05: ################################################################################
+06:
+07: PERL_FOO_BAR_VERSION = 0.02
+08: PERL_FOO_BAR_SOURCE = Foo-Bar-$(PERL_FOO_BAR_VERSION).tar.gz
+09: PERL_FOO_BAR_SITE = $(BR2_CPAN_MIRROR)/authors/id/M/MO/MONGER/
+10: PERL_FOO_BAR_DEPENDENCIES = perl-strictures
+11: PERL_FOO_BAR_LICENSE = Artistic or GPLv1+
+12: PERL_FOO_BAR_LICENSE_FILES = LICENSE
+13:
+14: $(eval $(perl-package))
+------------------------
+
+On line 7, we declare the version of the package.
+
+On line 8 and 9, we declare the name of the tarball and the location
+of the tarball on a CPAN server. Buildroot will automatically download
+the tarball from this location.
+
+On line 10, we declare our dependencies, so that they are built
+before the build process of our package starts.
+
+On line 11 and 12, we give licensing details about the package (its
+license on line 11, and the file containing the license text on line
+12).
+
+Finally, on line 14, we invoke the +perl-package+ macro that
+generates all the Makefile rules that actually allow the package to be
+built.
+
+Most of these data can be retrieved from https://metacpan.org/.
+So, this file and the Config.in can be generated by running
+the script +supports/scripts/scancpan Foo-Bar+ in the Buildroot directory
+(or in the +BR2_EXTERNAL+ directory).
+This script creates a Config.in file and foo-bar.mk file for the
+requested package, and also recursively for all dependencies specified by
+CPAN. You should still manually edit the result. In particular, the
+following things should be checked.
+
+* The +PERL_FOO_BAR_LICENSE_FILES+ variable is not set, because metacpan
+  doesn't have this information. Also, the name of the license file(s)
+  varies between packages, and some don't even have a license file.
+* If the perl module links with a shared library that is provided by
+  another (non-perl) package, this dependency is not added automatically.
+  It has to be added manually to +PERL_FOO_BAR_DEPENDENCIES+.
+* The +package/Config.in+ file has to be updated manually to include the
+  generated Config.in files. As a hint, the +scancpan+ script prints out
+  the required +source "..."+ statements, sorted alphabetically.
+
+[[perl-package-reference]]
+
++perl-package+ reference
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+As a policy, packages that provide Perl/CPAN modules should all be
+named +perl-<something>+ in Buildroot.
+
+This infrastructure handles various Perl build systems :
++ExtUtils-MakeMaker+, +Module-Build+ and +Module-Build-Tiny+.
++Build.PL+ is always preferred when a package provides a +Makefile.PL+
+and a +Build.PL+.
+
+The main macro of the Perl/CPAN package infrastructure is
++perl-package+. It is similar to the +generic-package+ macro. The ability to
+have target and host packages is also available, with the
++host-perl-package+ macro.
+
+Just like the generic infrastructure, the Perl/CPAN infrastructure
+works by defining a number of variables before calling the
++perl-package+ macro.
+
+First, all the package metadata information variables that exist in the
+generic infrastructure also exist in the Perl/CPAN infrastructure:
++PERL_FOO_VERSION+, +PERL_FOO_SOURCE+,
++PERL_FOO_PATCH+, +PERL_FOO_SITE+,
++PERL_FOO_SUBDIR+, +PERL_FOO_DEPENDENCIES+,
++PERL_FOO_INSTALL_TARGET+.
+
+Note that setting +PERL_FOO_INSTALL_STAGING+ to +YES+ has no effect
+unless a +PERL_FOO_INSTALL_STAGING_CMDS+ variable is defined. The perl
+infrastructure doesn't define these commands since Perl modules generally
+don't need to be installed to the +staging+ directory.
+
+A few additional variables, specific to the Perl/CPAN infrastructure,
+can also be defined. Many of them are only useful in very specific
+cases, typical packages will therefore only use a few of them.
+
+* +PERL_FOO_CONF_OPT+/+HOST_PERL_FOO_CONF_OPT+, to specify additional
+  configure options to pass to the +perl Makefile.PL+ or +perl Build.PL+.
+  By default, empty.
+
+* +PERL_FOO_BUILD_OPT+/+HOST_PERL_FOO_BUILD_OPT+, to specify additional
+  options to pass to +make pure_all+ or +perl Build build+ in the build step.
+  By default, empty.
+
+* +PERL_FOO_INSTALL_TARGET_OPT+, to specify additional options to
+  pass to +make pure_install+ or +perl Build install+ in the install step.
+  By default, empty.
+
+* +HOST_PERL_FOO_INSTALL_OPT+, to specify additional options to
+  pass to +make pure_install+ or +perl Build install+ in the install step.
+  By default, empty.

docs/manual/adding-packages.txt

@@ -22,6 +22,8 @@ include::adding-packages-python.txt[]
 
 include::adding-packages-luarocks.txt[]
 
+include::adding-packages-perl.txt[]
+
 include::adding-packages-hooks.txt[]
 
 include::adding-packages-gettext.txt[]

docs/manual/configure.txt

@@ -216,7 +216,7 @@ x86_64 target, you have to generate a cross-compilation toolchain with
 Buildroot or crosstool-NG.
 
 If you want to generate a custom toolchain for your project, that can
-be used as an external toolchain in Buildroot, our recommandation is
+be used as an external toolchain in Buildroot, our recommendation is
 definitely to build it with http://crosstool-ng.org[crosstool-NG]. We
 recommend to build the toolchain separately from Buildroot, and then
 _import_ it in Buildroot using the external toolchain backend.
@@ -310,22 +310,24 @@ different solutions to handle the +/dev+ directory :
    about +mdev+ and the syntax of its configuration file, see
    http://git.busybox.net/busybox/tree/docs/mdev.txt.
 
- * The fourth solution is *Dynamic using udev*. This method also
+ * The fourth solution is *Dynamic using eudev*. This method also
    relies on the _devtmpfs_ virtual filesystem detailed above, but
-   adds the +udev+ userspace daemon on top of it. +udev+ is a daemon
+   adds the +eudev+ userspace daemon on top of it. +eudev+ is a daemon
    that runs in the background, and gets called by the kernel when a
    device gets added or removed from the system. It is a more
-   heavyweight solution than +mdev+, but provides higher flexibility
-   and is sometimes mandatory for some system components (systemd for
-   example). +udev+ is the mechanism used in most desktop Linux
-   distributions. For more details about +udev+, see
-   http://en.wikipedia.org/wiki/Udev.
+   heavyweight solution than +mdev+, but provides higher flexibility.
+   +eudev+ is a standalone version of +udev+, the original userspace
+   daemon used in most desktop Linux distributions, which is now part
+   of Systemd. For more details, see http://en.wikipedia.org/wiki/Udev.
 
-The Buildroot developers recommandation is to start with the *Dynamic
+The Buildroot developers recommendation is to start with the *Dynamic
 using devtmpfs only* solution, until you have the need for userspace
 to be notified when devices are added/removed, or if firmwares are
 needed, in which case *Dynamic using mdev* is usually a good solution.
 
+Note that if +systemd+ is chosen as init system, /dev management will
+be performed by the +udev+ program provided by +systemd+.
+
 init system
 ~~~~~~~~~~~
 

fs/common.mk

@@ -64,7 +64,7 @@ ROOTFS_$(2)_COMPRESS_EXT = .xz
 ROOTFS_$(2)_COMPRESS_CMD = $$(XZ) -9 -C crc32 -c
 endif
 
-$$(BINARIES_DIR)/rootfs.$(1): $$(ROOTFS_$(2)_DEPENDENCIES)
+$$(BINARIES_DIR)/rootfs.$(1): target-finalize $$(ROOTFS_$(2)_DEPENDENCIES)
 	@$$(call MESSAGE,"Generating root filesystem image rootfs.$(1)")
 	$$(foreach hook,$$(ROOTFS_$(2)_PRE_GEN_HOOKS),$$(call $$(hook))$$(sep))
 	rm -f $$(FAKEROOT_SCRIPT)
@@ -95,7 +95,7 @@ rootfs-$(1)-show-depends:
 rootfs-$(1): $$(BINARIES_DIR)/rootfs.$(1) $$(ROOTFS_$(2)_POST_TARGETS)
 
 ifeq ($$(BR2_TARGET_ROOTFS_$(2)),y)
-TARGETS += rootfs-$(1)
+TARGETS_ROOTFS += rootfs-$(1)
 endif
 endef
 

linux/linux.mk

@@ -186,7 +186,7 @@ define LINUX_CONFIGURE_CMDS
 	$(if $(BR2_ROOTFS_DEVICE_CREATION_STATIC),,
 		$(call KCONFIG_ENABLE_OPT,CONFIG_DEVTMPFS,$(@D)/.config)
 		$(call KCONFIG_ENABLE_OPT,CONFIG_DEVTMPFS_MOUNT,$(@D)/.config))
-	$(if $(BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV),
+	$(if $(BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV),
 		$(call KCONFIG_ENABLE_OPT,CONFIG_INOTIFY_USER,$(@D)/.config))
 	$(if $(BR2_PACKAGE_KTAP),
 		$(call KCONFIG_ENABLE_OPT,CONFIG_DEBUG_FS,$(@D)/.config)
@@ -194,7 +194,12 @@ define LINUX_CONFIGURE_CMDS
 		$(call KCONFIG_ENABLE_OPT,CONFIG_PERF_EVENTS,$(@D)/.config)
 		$(call KCONFIG_ENABLE_OPT,CONFIG_FUNCTION_TRACER,$(@D)/.config))
 	$(if $(BR2_PACKAGE_SYSTEMD),
-		$(call KCONFIG_ENABLE_OPT,CONFIG_CGROUPS,$(@D)/.config))
+		$(call KCONFIG_ENABLE_OPT,CONFIG_CGROUPS,$(@D)/.config)
+		$(call KCONFIG_ENABLE_OPT,CONFIG_INOTIFY_USER,$(@D)/.config)
+		$(call KCONFIG_ENABLE_OPT,CONFIG_FHANDLE,$(@D)/.config)
+		$(call KCONFIG_ENABLE_OPT,CONFIG_AUTOFS4_FS,$(@D)/.config)
+		$(call KCONFIG_ENABLE_OPT,CONFIG_TMPFS_POSIX_ACL,$(@D)/.config)
+		$(call KCONFIG_ENABLE_OPT,CONFIG_TMPFS_POSIX_XATTR,$(@D)/.config))
 	$(if $(BR2_LINUX_KERNEL_APPENDED_DTB),
 		$(call KCONFIG_ENABLE_OPT,CONFIG_ARM_APPENDED_DTB,$(@D)/.config))
 	yes '' | $(TARGET_MAKE_ENV) $(MAKE1) $(LINUX_MAKE_FLAGS) -C $(@D) oldconfig

package/Config.in

@@ -156,6 +156,8 @@ source "package/doom-wad/Config.in"
 source "package/gnuchess/Config.in"
 source "package/lbreakout2/Config.in"
 source "package/ltris/Config.in"
+source "package/opentyrian/Config.in"
+source "package/opentyrian-data/Config.in"
 source "package/prboom/Config.in"
 source "package/rubix/Config.in"
 endmenu
@@ -276,6 +278,7 @@ source "package/dmraid/Config.in"
 source "package/dvb-apps/Config.in"
 source "package/dvbsnoop/Config.in"
 source "package/eeprog/Config.in"
+source "package/eudev/Config.in"
 source "package/evemu/Config.in"
 source "package/evtest/Config.in"
 source "package/fan-ctrl/Config.in"
@@ -394,8 +397,23 @@ menu "Perl libraries/modules"
 endmenu
 endif
 source "package/php/Config.in"
+if BR2_PACKAGE_PHP
+if !BR2_PREFER_STATIC_LIB
+menu "External php extensions"
+source "package/php-gnupg/Config.in"
+source "package/php-imagick/Config.in"
+source "package/php-ssh2/Config.in"
+source "package/php-yaml/Config.in"
+source "package/php-zmq/Config.in"
+endmenu
+endif
+if BR2_PREFER_STATIC_LIB
+comment "External PHP extensions need a toolchain w/ dynamic library"
+endif
+endif
 source "package/python/Config.in"
-if BR2_PACKAGE_PYTHON
+source "package/python3/Config.in"
+if BR2_PACKAGE_PYTHON || BR2_PACKAGE_PYTHON3
 menu "external python modules"
 source "package/python-bottle/Config.in"
 source "package/python-configobj/Config.in"
@@ -431,7 +449,6 @@ source "package/python-tornado/Config.in"
 source "package/python-versiontools/Config.in"
 endmenu
 endif
-source "package/python3/Config.in"
 source "package/ruby/Config.in"
 source "package/tcl/Config.in"
 if BR2_PACKAGE_TCL
@@ -467,6 +484,7 @@ source "package/portaudio/Config.in"
 source "package/speex/Config.in"
 source "package/taglib/Config.in"
 source "package/tremor/Config.in"
+source "package/vo-aacenc/Config.in"
 source "package/webrtc-audio-processing/Config.in"
 endmenu
 
@@ -567,6 +585,7 @@ endmenu
 menu "Hardware handling"
 source "package/ccid/Config.in"
 source "package/dtc/Config.in"
+source "package/gnu-efi/Config.in"
 source "package/lcdapi/Config.in"
 source "package/libaio/Config.in"
 source "package/libatasmart/Config.in"
@@ -616,7 +635,6 @@ source "package/json-c/Config.in"
 source "package/json-glib/Config.in"
 source "package/libjson/Config.in"
 source "package/libroxml/Config.in"
-source "package/libxml-parser-perl/Config.in"
 source "package/libxml2/Config.in"
 source "package/libxmlpp/Config.in"
 source "package/libxslt/Config.in"

package/Makefile.in

@@ -206,7 +206,8 @@ HOST_PATH=$(HOST_DIR)/bin:$(HOST_DIR)/usr/bin:$(PATH)
 HOSTCC_VERSION:=$(shell $(HOSTCC_NOCCACHE) --version | \
 	sed -n 's/^.* \([0-9]*\)\.\([0-9]*\)\.\([0-9]*\)[ ]*.*$$/\1\2\3/p')
 
-export PERL5LIB := $(HOST_DIR)/usr/lib/perl
+HOST_PERL_ARCHNAME := $(shell perl -MConfig -e "print Config->{archname}")
+export PERL5LIB := $(HOST_DIR)/usr/lib/perl5/$(HOST_PERL_ARCHNAME):$(HOST_DIR)/usr/lib/perl5
 
 TARGET_CONFIGURE_OPTS=PATH=$(TARGET_PATH) \
 		AR="$(TARGET_AR)" \
@@ -359,5 +360,6 @@ include package/pkg-download.mk
 include package/pkg-autotools.mk
 include package/pkg-cmake.mk
 include package/pkg-luarocks.mk
+include package/pkg-perl.mk
 include package/pkg-python.mk
 include package/pkg-generic.mk

package/binutils/Config.in.host

@@ -49,7 +49,7 @@ endchoice
 config BR2_BINUTILS_VERSION
 	string
 	default "2.18-avr32-1.0.1" if BR2_BINUTILS_VERSION_2_18_AVR32_1_0_1
-	default "0c824ba511fa9b028220eb3c39b566af89ac9dda" if BR2_arc
+	default "a934fe50786aa0dc0fb5da4754e7e07591c9cd8e" if BR2_arc
 	default "8351467c933d277ebea0c8d99ad2b65b5f7b6bc2" if BR2_microblaze
 	default "2.20.1"	if BR2_BINUTILS_VERSION_2_20_1
 	default "2.21"		if BR2_BINUTILS_VERSION_2_21

package/ccid/ccid.mk

@@ -12,7 +12,7 @@ CCID_LICENSE_FILES = COPYING
 CCID_INSTALL_STAGING = YES
 CCID_DEPENDENCIES = pcsc-lite host-pkgconf libusb
 
-ifeq ($(BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV),y)
+ifeq ($(BR2_PACKAGE_HAS_UDEV),y)
 define CCID_INSTALL_UDEV_RULES
 	if test -d $(TARGET_DIR)/etc/udev/rules.d ; then \
 		cp $(@D)/src/92_pcscd_ccid.rules $(TARGET_DIR)/etc/udev/rules.d/ ; \

package/connman/connman.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-CONNMAN_VERSION = 1.19
+CONNMAN_VERSION = 1.21
 CONNMAN_SOURCE = connman-$(CONNMAN_VERSION).tar.xz
 CONNMAN_SITE = $(BR2_KERNEL_MIRROR)/linux/network/connman/
 CONNMAN_DEPENDENCIES = libglib2 dbus iptables gnutls

package/dbus/dbus.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-DBUS_VERSION = 1.4.26
+DBUS_VERSION = 1.6.8
 DBUS_SITE = http://dbus.freedesktop.org/releases/dbus
 DBUS_LICENSE = AFLv2.1 GPLv2+
 DBUS_LICENSE_FILES = COPYING
@@ -30,6 +30,10 @@ DBUS_CONF_OPT = --with-dbus-user=dbus \
 		--with-system-socket=/var/run/dbus/system_bus_socket \
 		--with-system-pid-file=/var/run/messagebus.pid
 
+define DBUS_USERS
+	dbus -1 dbus -1 * /var/run/dbus - dbus DBus messagebus user
+endef
+
 ifeq ($(BR2_PREFER_STATIC_LIB),y)
 DBUS_CONF_OPT += LIBS='-lpthread'
 endif

package/dmraid/Config.in

@@ -2,8 +2,6 @@ config BR2_PACKAGE_DMRAID
 	bool "dmraid"
 	depends on BR2_LARGEFILE
 	depends on BR2_USE_MMU # lvm2
-	# triggers gcc ice
-	depends on !BR2_arc
 	select BR2_PACKAGE_LVM2
 	help
 	  dmraid discovers, activates, deactivates and displays properties
@@ -15,4 +13,3 @@ config BR2_PACKAGE_DMRAID
 comment "dmraid needs a toolchain w/ largefile"
 	depends on BR2_USE_MMU
 	depends on !BR2_LARGEFILE
-	depends on !BR2_arc

package/eudev/Config.in

@@ -0,0 +1,42 @@
+config BR2_PACKAGE_EUDEV
+	bool "eudev"
+	depends on !BR2_avr32 # no epoll_create1
+	depends on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV
+	depends on BR2_USE_MMU # uses fork()
+	depends on BR2_LARGEFILE # util-linux
+	depends on BR2_USE_WCHAR # util-linux
+	depends on !BR2_PREFER_STATIC_LIB # kmod
+	select BR2_PACKAGE_HAS_UDEV
+	select BR2_PACKAGE_UTIL_LINUX
+	select BR2_PACKAGE_UTIL_LINUX_LIBBLKID
+	select BR2_PACKAGE_KMOD
+	help
+	  Userspace device daemon. This is a standalone version,
+	  independent of systemd. It is a fork maintained by Gentoo.
+
+	  eudev requires a Linux kernel >= 2.6.34: it relies on devtmpfs
+	  and inotify.
+
+	  http://github.com/gentoo/eudev/
+
+if BR2_PACKAGE_EUDEV
+
+config BR2_PACKAGE_PROVIDES_UDEV
+	default "eudev"
+
+config BR2_PACKAGE_EUDEV_RULES_GEN
+	bool "enable rules generator"
+	help
+	  Enable persistent rules generator
+
+endif
+
+comment "eudev needs eudev /dev management"
+	depends on !BR2_avr32
+	depends on BR2_USE_MMU
+	depends on !BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV
+
+comment "eudev needs a toolchain w/ largefile, wchar, dynamic library"
+	depends on !BR2_avr32
+	depends on BR2_USE_MMU
+	depends on !BR2_LARGEFILE || !BR2_USE_WCHAR || BR2_PREFER_STATIC_LIB

package/eudev/S10udev

@@ -0,0 +1,48 @@
+#!/bin/sh
+#
+# udev	This is a minimal non-LSB version of a UDEV startup script.  It
+#	was derived by stripping down the udev-058 LSB version for use
+#	with buildroot on embedded hardware using Linux 2.6.34+ kernels.
+#
+#	You may need to customize this for your system's resource limits
+#	(including startup time!) and administration.  For example, if
+#	your early userspace has a custom initramfs or initrd you might
+#	need /dev much earlier; or without hotpluggable busses (like USB,
+#	PCMCIA, MMC/SD, and so on) your /dev might be static after boot.
+#
+#	This script assumes your system boots right into the eventual root
+#	filesystem, and that init runs this udev script before any programs
+#	needing more device nodes than the bare-bones set -- /dev/console,
+#	/dev/zero, /dev/null -- that's needed to boot and run this script.
+#
+
+# Check for missing binaries
+UDEV_BIN=/sbin/udevd
+test -x $UDEV_BIN || exit 5
+
+# Check for config file and read it
+UDEV_CONFIG=/etc/udev/udev.conf
+test -r $UDEV_CONFIG || exit 6
+. $UDEV_CONFIG
+
+case "$1" in
+    start)
+        echo -n "Populating ${udev_root:-/dev} using udev: "
+        echo -e '\000\000\000\000' > /proc/sys/kernel/hotplug
+        $UDEV_BIN -d || (echo "FAIL" && exit 1)
+        udevadm trigger
+        echo "done"
+        ;;
+    stop)
+        # Stop execution of events
+        udevadm control --stop-exec-queue
+        killall udevd
+        ;;
+    *)
+        echo "Usage: $0 {start|stop}"
+        exit 1
+        ;;
+esac
+
+
+exit 0

package/eudev/eudev.mk

@@ -0,0 +1,43 @@
+################################################################################
+#
+# eudev
+#
+################################################################################
+
+EUDEV_VERSION = 1.3
+EUDEV_SITE = $(call github,gentoo,eudev,v$(EUDEV_VERSION))
+EUDEV_LICENSE = GPLv2+ (programs), LGPLv2.1+ (libraries)
+EUDEV_LICENSE_FILES = COPYING
+EUDEV_INSTALL_STAGING = YES
+EUDEV_AUTORECONF = YES
+
+# mq_getattr is in librt
+EUDEV_CONF_ENV += LIBS=-lrt
+
+EUDEV_CONF_OPT =		\
+	--sbindir=/sbin		\
+	--with-rootlibdir=/lib	\
+	--libexecdir=/lib	\
+	--with-firmware-path=/lib/firmware	\
+	--disable-introspection			\
+	--enable-split-usr			\
+	--enable-libkmod
+
+EUDEV_DEPENDENCIES = host-gperf host-pkgconf util-linux kmod
+
+ifeq ($(BR2_PACKAGE_EUDEV_RULES_GEN),y)
+EUDEV_CONF_OPT += --enable-rule_generator
+endif
+
+ifeq ($(BR2_PACKAGE_LIBGLIB2),y)
+EUDEV_CONF_OPT += --enable-gudev
+EUDEV_DEPENDENCIES += libglib2
+else
+EUDEV_CONF_OPT += --disable-gudev
+endif
+
+define EUDEV_INSTALL_INIT_SYSV
+	$(INSTALL) -m 0755 package/eudev/S10udev $(TARGET_DIR)/etc/init.d/S10udev
+endef
+
+$(eval $(autotools-package))

package/f2fs-tools/f2fs-tools.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-F2FS_TOOLS_VERSION = 576cb469e73b9342f1d10ba5d0428bbce22cbc3b
+F2FS_TOOLS_VERSION = 858c4039c85f7c00c57925902985701b1e083555
 F2FS_TOOLS_SITE = http://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git
 F2FS_TOOLS_SITE_METHOD = git
 F2FS_TOOLS_CONF_ENV = ac_cv_file__git=no

package/freescale-imx/firmware-imx/firmware-imx.mk

@@ -5,7 +5,7 @@
 ################################################################################
 
 FIRMWARE_IMX_VERSION = $(FREESCALE_IMX_VERSION)
-FIRMWARE_IMX_SITE = $(FREESCALE_IMX_MIRROR_SITE)
+FIRMWARE_IMX_SITE = $(FREESCALE_IMX_SITE)
 FIRMWARE_IMX_SOURCE = firmware-imx-$(FIRMWARE_IMX_VERSION).bin
 FIRMWARE_IMX_LICENSE = Freescale Semiconductor Software License Agreement, \
 	Atheros license (ath6k)

package/freescale-imx/freescale-imx.mk

@@ -4,9 +4,7 @@
 #
 ################################################################################
 
-FREESCALE_IMX_VERSION = 1.1.0
-
-# No official download site from freescale, just this mirror
-FREESCALE_IMX_MIRROR_SITE   = http://download.ossystems.com.br/bsp/freescale/source
+FREESCALE_IMX_VERSION = 3.5.7-1.0.0
+FREESCALE_IMX_SITE    = http://www.freescale.com/lgfiles/NMG/MAD/YOCTO/
 
 include $(sort $(wildcard package/freescale-imx/*/*.mk))

package/freescale-imx/gpu-viv-bin-mx6q/gpu-viv-bin-mx6q.mk

@@ -4,8 +4,12 @@
 #
 ################################################################################
 
-GPU_VIV_BIN_MX6Q_VERSION = $(FREESCALE_IMX_VERSION)
-GPU_VIV_BIN_MX6Q_SITE    = $(FREESCALE_IMX_MIRROR_SITE)
+ifeq ($(BR2_ARM_EABIHF),y)
+GPU_VIV_BIN_MX6Q_VERSION = $(FREESCALE_IMX_VERSION)-hfp
+else
+GPU_VIV_BIN_MX6Q_VERSION = $(FREESCALE_IMX_VERSION)-sfp
+endif
+GPU_VIV_BIN_MX6Q_SITE    = $(FREESCALE_IMX_SITE)
 GPU_VIV_BIN_MX6Q_SOURCE  = gpu-viv-bin-mx6q-$(GPU_VIV_BIN_MX6Q_VERSION).bin
 
 GPU_VIV_BIN_MX6Q_INSTALL_STAGING = YES

package/freescale-imx/imx-lib/imx-lib.mk

@@ -5,9 +5,10 @@
 ################################################################################
 
 IMX_LIB_VERSION = $(FREESCALE_IMX_VERSION)
-IMX_LIB_SITE    = $(FREESCALE_IMX_MIRROR_SITE)
-IMX_LIB_LICENSE = LGPLv2.1+
-# No license file included
+IMX_LIB_SITE    = $(FREESCALE_IMX_SITE)
+IMX_LIB_LICENSE = Freescale License (vpu), LGPLv2.1+ (the rest)
+IMX_LIB_LICENSE_FILES = EULA
+IMX_LIB_SOURCE = imx-lib-$(IMX_LIB_VERSION).bin
 
 IMX_LIB_INSTALL_STAGING = YES
 
@@ -25,6 +26,23 @@ IMX_LIB_MAKE_ENV = \
 	PLATFORM=$(BR2_PACKAGE_IMX_LIB_PLATFORM) \
 	INCLUDE="$(IMX_LIB_INCLUDE)"
 
+# The archive is a shell-self-extractor of a bzipped tar. It happens
+# to extract in the correct directory (imx-lib-x.y.z)
+# The --force makes sure it doesn't fail if the source dir already exists.
+# The --auto-accept skips the license check - not needed for us
+# because we have legal-info
+# Since there's a EULA in the bin file, extract it to imx-lib-x.y.z/EULA
+#
+define IMX_LIB_EXTRACT_CMDS
+	awk 'BEGIN      { start=0; } \
+	     /^EOEULA/  { start = 0; } \
+	                { if (start) print; } \
+	     /<<EOEULA/ { start=1; }'\
+	    $(DL_DIR)/$(IMX_LIB_SOURCE) > $(@D)/EULA
+	cd $(BUILD_DIR); \
+	sh $(DL_DIR)/$(IMX_LIB_SOURCE) --force --auto-accept
+endef
+
 define IMX_LIB_BUILD_CMDS
 	$(IMX_LIB_MAKE_ENV) $(MAKE1) -C $(@D)
 endef

package/gcc/Config.in.host

@@ -96,7 +96,7 @@ config BR2_GCC_VERSION
 	default "4.6.4"     if BR2_GCC_VERSION_4_6_X
 	default "4.7.3"     if BR2_GCC_VERSION_4_7_X
 	default "4.8.2"     if BR2_GCC_VERSION_4_8_X
-	default "7466697995233cc3aab5b9427bf843e3c7fabd80" if BR2_GCC_VERSION_4_8_ARC
+	default "c6227bc154124e270f15793deddfa3fe18f7db54" if BR2_GCC_VERSION_4_8_ARC
 	default "b93bb009e021aba64dd4b8cdb0bbc5a176c55543" if BR2_GCC_VERSION_4_9_MICROBLAZE
 	default BR2_GCC_SNAP_DATE if BR2_GCC_VERSION_SNAP
 

package/gdb/Config.in.host

@@ -53,5 +53,5 @@ config BR2_GDB_VERSION
                                    (!BR2_PACKAGE_HOST_GDB && BR2_avr32)
 	default "7.4.1"    if BR2_GDB_VERSION_7_4
 	default "7.5.1"    if BR2_GDB_VERSION_7_5 || !BR2_PACKAGE_HOST_GDB
-	default "f25a1952afd054205f9471e449c1f7ca5b271b7c" if BR2_arc
+	default "cb15acc5eecea46d041730e5c2c9fa1d4283ef25" if BR2_arc
 	default "6be65fb56ea6694a9260733a536a023a1e2d4d57" if BR2_microblaze

package/giblib/giblib.mk

@@ -9,7 +9,6 @@ GIBLIB_SITE = http://linuxbrit.co.uk/downloads/
 GIBLIB_INSTALL_STAGING = YES
 GIBLIB_DEPENDENCIES = imlib2
 GIBLIB_AUTORECONF = YES
-GIBLIB_AUTORECONF_OPT = --install
 GIBLIB_CONF_OPT = --with-imlib2-prefix=$(STAGING_DIR)/usr \
 		  --with-imlib2-exec-prefix=$(STAGING_DIR)/usr
 GIBLIB_CONFIG_SCRIPTS = giblib-config

package/git/git.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-GIT_VERSION         = 1.8.5.3
+GIT_VERSION         = 1.8.5.4
 GIT_SITE            = http://git-core.googlecode.com/files/
 GIT_LICENSE         = GPLv2 LGPLv2.1+
 GIT_LICENSE_FILES   = COPYING LGPL-2.1

package/glibc/Config.in

@@ -0,0 +1,21 @@
+if BR2_TOOLCHAIN_BUILDROOT_GLIBC
+
+choice
+	prompt "glibc version"
+	default BR2_GLIBC_VERSION_2_18
+	# Architectures supported in mainline glibc
+	depends on BR2_arm    || BR2_armeb    || BR2_aarch64 || \
+		   BR2_i386   || BR2_mips     || BR2_mipsel  || \
+		   BR2_mips64 || BR2_mips64el || BR2_powerpc || \
+		   BR2_sh     || BR2_sh64     || BR2_sparc   || \
+		   BR2_x86_64
+
+config BR2_GLIBC_VERSION_2_18
+       bool "2.18"
+
+config BR2_GLIBC_VERSION_2_19
+       bool "2.19"
+
+endchoice
+
+endif

package/glibc/glibc.mk

@@ -21,7 +21,7 @@ GLIBC_SITE = http://downloads.yoctoproject.org/releases/eglibc/
 GLIBC_SOURCE = eglibc-$(GLIBC_VERSION).tar.bz2
 GLIBC_SRC_SUBDIR = libc
 else
-GLIBC_VERSION = 2.18
+GLIBC_VERSION = $(if $(BR2_GLIBC_VERSION_2_19),2.19,2.18)
 GLIBC_SITE = $(BR2_GNU_MIRROR)/libc
 GLIBC_SOURCE = glibc-$(GLIBC_VERSION).tar.xz
 GLIBC_SRC_SUBDIR = .
@@ -31,13 +31,13 @@ endif
 GLIBC_LICENSE = GPLv2+ (programs), LGPLv2.1+, BSD-3c, MIT (library)
 GLIBC_LICENSE_FILES = $(addprefix $(GLIBC_SRC_SUBDIR)/,COPYING COPYING.LIB LICENSES)
 
+# glibc is part of the toolchain so disable the toolchain dependency
+GLIBC_ADD_TOOLCHAIN_DEPENDENCY = NO
+
 # Before (e)glibc is configured, we must have the first stage
 # cross-compiler and the kernel headers
 GLIBC_DEPENDENCIES = host-gcc-initial linux-headers host-gawk
 
-# Before (e)glibc is built, we must have the second stage cross-compiler
-glibc-build: host-gcc-intermediate
-
 GLIBC_SUBDIR = build
 
 GLIBC_INSTALL_STAGING = YES
@@ -139,3 +139,6 @@ define GLIBC_INSTALL_TARGET_CMDS
 endef
 
 $(eval $(autotools-package))
+
+# Before (e)glibc is built, we must have the second stage cross-compiler
+$(GLIBC_TARGET_BUILD): | host-gcc-intermediate

package/gnu-efi/Config.in

@@ -0,0 +1,9 @@
+config BR2_PACKAGE_GNU_EFI
+	bool "gnu-efi"
+	depends on BR2_i386 || BR2_x86_64
+	help
+	  Develop EFI applications for IA-64 (IPF), IA-32 (x86), and
+	  x86_64 platforms using the GNU toolchain and the EFI
+	  development environment.
+
+	  http://gnu-efi.sourceforge.net/

package/gnu-efi/gnu-efi-01-use-override-cflags.patch

@@ -0,0 +1,53 @@
+Allow CFLAGS/CPPFLAGS to be completed from the environment
+
+Buildroot passes its own CPPFLAGS and CFLAGS in the environment, so
+the CFLAGS += and CPPFLAGS += statements in gnu-efi Makefile have no
+effect. Change these to override <VARIABLE> += so that they extend the
+flags passed by Buildroot.
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+
+Index: b/Make.defaults
+===================================================================
+--- a/Make.defaults
++++ b/Make.defaults
+@@ -83,25 +83,25 @@
+                                && [ $(GCCMINOR) -ge "7" ] ) ) \
+                         && echo 1)
+ ifeq ($(GCCNEWENOUGH),1)
+-  CPPFLAGS += -DGNU_EFI_USE_MS_ABI -maccumulate-outgoing-args --std=c11
++  override CPPFLAGS += -DGNU_EFI_USE_MS_ABI -maccumulate-outgoing-args --std=c11
+ endif
+ 
+ # Arch-specific compilation flags
+-CPPFLAGS += -DCONFIG_$(ARCH)
++override CPPFLAGS += -DCONFIG_$(ARCH)
+ 
+ ifeq ($(ARCH),ia64)
+-  CFLAGS += -mfixed-range=f32-f127
++  override CFLAGS += -mfixed-range=f32-f127
+ endif
+ 
+ ifeq ($(ARCH),ia32)
+-  CFLAGS += -mno-mmx -mno-sse
++  override CFLAGS += -mno-mmx -mno-sse
+   ifeq ($(HOSTARCH),x86_64)
+     ARCH3264 = -m32
+   endif
+ endif
+ 
+ ifeq ($(ARCH),x86_64)
+-  CFLAGS += -mno-red-zone -mno-mmx -mno-sse
++  override CFLAGS += -mno-red-zone -mno-mmx -mno-sse
+   ifeq ($(HOSTARCH),ia32)
+     ARCH3264 = -m64
+   endif
+@@ -110,7 +110,7 @@
+ # Generic compilation flags
+ INCDIR  += -I$(SRCDIR) -I$(TOPDIR)/inc -I$(TOPDIR)/inc/$(ARCH) \
+            -I$(TOPDIR)/inc/protocol
+-CFLAGS  += $(ARCH3264) -O2 -fpic -Wall -fshort-wchar -fno-strict-aliasing \
++override CFLAGS  += $(ARCH3264) -O2 -fpic -Wall -fshort-wchar -fno-strict-aliasing \
+            -fno-merge-constants -ffreestanding -fno-stack-protector       \
+            -fno-stack-check
+ ASFLAGS += $(ARCH3264)

package/gnu-efi/gnu-efi-02-parallel-make-archives.patch

@@ -0,0 +1,48 @@
+Fix parallel make failure for archives
+
+Upstream-Status: Pending
+
+The lib and gnuefi makefiles were using the lib.a() form which compiles
+and ar's as a pair instead of compiling all and then ar'ing which can
+parallelize better. This was resulting in build failures on larger values
+of -j.
+
+See http://www.chemie.fu-berlin.de/chemnet/use/info/make/make_toc.html#TOC105
+for details.
+
+Signed-off-by: Saul Wold <sgw@linux.intel.com>
+Signed-off-by: Darren Hart <dvhart@linux.intel.com>
+---
+---
+ gnuefi/Makefile |    3 ++-
+ lib/Makefile    |    3 ++-
+ 2 files changed, 4 insertions(+), 2 deletions(-)
+
+Index: gnu-efi-3.0/lib/Makefile
+===================================================================
+--- gnu-efi-3.0.orig/lib/Makefile
++++ gnu-efi-3.0/lib/Makefile
+@@ -66,7 +66,8 @@ all: libsubdirs libefi.a
+ libsubdirs:
+ 	for sdir in $(SUBDIRS); do mkdir -p $$sdir; done
+ 
+-libefi.a: $(patsubst %,libefi.a(%),$(OBJS))
++libefi.a: $(OBJS)
++	$(AR) rv $@ $(OBJS)
+ 
+ clean:
+ 	rm -f libefi.a *~ $(OBJS) */*.o
+Index: gnu-efi-3.0/gnuefi/Makefile
+===================================================================
+--- gnu-efi-3.0.orig/gnuefi/Makefile
++++ gnu-efi-3.0/gnuefi/Makefile
+@@ -51,7 +51,8 @@ TARGETS	= crt0-efi-$(ARCH).o libgnuefi.a
+ 
+ all:	$(TARGETS)
+ 
+-libgnuefi.a: $(patsubst %,libgnuefi.a(%),$(OBJS))
++libgnuefi.a: $(OBJS)
++	$(AR) rv $@ $(OBJS)
+ 
+ clean:
+ 	rm -f $(TARGETS) *~ *.o $(OBJS)

package/gnu-efi/gnu-efi-03-parallel-make.patch

@@ -0,0 +1,22 @@
+Fix parallel make failure
+
+Upstream-Status: Submitted [Maintainer directly]
+
+Add a missing dependency which resulted in a race leading to failure
+on larger values of -j.
+
+Signed-off-by: Darren Hart <dvhart@linux.intel.com>
+
+Index: gnu-efi-3.0/Makefile
+===================================================================
+--- gnu-efi-3.0.orig/Makefile
++++ gnu-efi-3.0/Makefile
+@@ -42,6 +42,8 @@ include $(SRCDIR)/Make.defaults
+ 
+ SUBDIRS = lib gnuefi inc apps
+ 
++gnuefi: lib
++
+ all:	check_gcc $(SUBDIRS)
+ 
+ $(SUBDIRS):

package/gnu-efi/gnu-efi.mk

@@ -0,0 +1,38 @@
+################################################################################
+#
+# gnu-efi
+#
+################################################################################
+
+GNU_EFI_VERSION = 3.0u
+GNU_EFI_SOURCE = gnu-efi_$(GNU_EFI_VERSION).orig.tar.gz
+GNU_EFI_SITE = http://downloads.sourceforge.net/project/gnu-efi/
+GNU_EFI_INSTALL_STAGING = YES
+GNU_EFI_LICENSE = GPLv2+ (gnuefi), BSD (efilib)
+GNU_EFI_LICENSE_FILES = debian/copyright
+
+# gnu-efi is a set of library and header files used to build
+# standalone EFI applications such as bootloaders. There is no point
+# in installing these libraries to the target.
+GNU_EFI_INSTALL_TARGET = NO
+
+ifeq ($(BR2_i386),y)
+GNU_EFI_PLATFORM=ia32
+else ifeq ($(BR2_x86_64),y)
+GNU_EFI_PLATFORM=x86_64
+endif
+
+define GNU_EFI_BUILD_CMDS
+	$(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \
+		$(TARGET_CONFIGURE_OPTS) \
+		ARCH=$(GNU_EFI_PLATFORM)
+endef
+
+define GNU_EFI_INSTALL_STAGING_CMDS
+	$(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \
+		$(TARGET_CONFIGURE_OPTS) \
+		INSTALLROOT=$(STAGING_DIR) \
+		PREFIX=/usr ARCH=$(GNU_EFI_PLATFORM) install
+endef
+
+$(eval $(generic-package))

package/gpsd/gpsd.mk

@@ -222,7 +222,7 @@ define GPSD_INSTALL_STAGING_CMDS
 		install)
 endef
 
-ifeq ($(BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV),y)
+ifeq ($(BR2_PACKAGE_HAS_UDEV),y)
 define GPSD_INSTALL_UDEV_RULES
 	(cd $(@D); \
 		$(GPSD_SCONS_ENV) \

package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk

@@ -4,9 +4,8 @@
 #
 ################################################################################
 
-GST_FSL_PLUGINS_VERSION = 3.0.1
-# No official download site from freescale, just this mirror
-GST_FSL_PLUGINS_SITE = http://download.ossystems.com.br/bsp/freescale/source
+GST_FSL_PLUGINS_VERSION = $(FREESCALE_IMX_VERSION)
+GST_FSL_PLUGINS_SITE = $(FREESCALE_IMX_SITE)
 
 # Most is LGPLv2+, but some sources are copied from upstream and are
 # LGPLv2.1+, which essentially makes it LGPLv2.1+

package/gstreamer1/gst1-libav/gst1-libav.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-GST1_LIBAV_VERSION = 1.2.2
+GST1_LIBAV_VERSION = 1.2.3
 GST1_LIBAV_SOURCE = gst-libav-$(GST1_LIBAV_VERSION).tar.xz
 GST1_LIBAV_SITE = http://gstreamer.freedesktop.org/src/gst-libav
 

package/gstreamer1/gst1-plugins-bad/Config.in

@@ -318,6 +318,14 @@ config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_APEXSINK
 	bool "apexsink"
 	select BR2_PACKAGE_OPENSSL
 
+config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_ASSRENDER
+	bool "assrender"
+	select BR2_PACKAGE_LIBASS
+
+config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_VOAACENC
+	bool "voaacenc"
+	select BR2_PACKAGE_VO_AACENC
+
 config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_BZ2
 	bool "bz2"
 	select BR2_PACKAGE_BZIP2

package/gstreamer1/gst1-plugins-bad/gst1-plugins-bad.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-GST1_PLUGINS_BAD_VERSION = 1.2.2
+GST1_PLUGINS_BAD_VERSION = 1.2.3
 GST1_PLUGINS_BAD_SOURCE = gst-plugins-bad-$(GST1_PLUGINS_BAD_VERSION).tar.xz
 GST1_PLUGINS_BAD_SITE = http://gstreamer.freedesktop.org/src/gst-plugins-bad
 GST1_PLUGINS_BAD_LICENSE_FILES = COPYING COPYING.LIB
@@ -39,9 +39,7 @@ GST1_PLUGINS_BAD_CONF_OPT += \
 	--disable-mfc \
 	--disable-opensles \
 	--disable-uvch264 \
-	--disable-assrender \
 	--disable-voamrwbenc \
-	--disable-voaacenc \
 	--disable-chromaprint \
 	--disable-dash \
 	--disable-dc1394 \
@@ -511,6 +509,20 @@ else
 GST1_PLUGINS_BAD_CONF_OPT += --disable-apexsink
 endif
 
+ifeq ($(BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_ASSRENDER),y)
+GST1_PLUGINS_BAD_CONF_OPT += --enable-assrender
+GST1_PLUGINS_BAD_DEPENDENCIES += libass
+else
+GST1_PLUGINS_BAD_CONF_OPT += --disable-assrender
+endif
+
+ifeq ($(BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_VOAACENC),y)
+GST1_PLUGINS_BAD_CONF_OPT += --enable-voaacenc
+GST1_PLUGINS_BAD_DEPENDENCIES += vo-aacenc
+else
+GST1_PLUGINS_BAD_CONF_OPT += --disable-voaacenc
+endif
+
 ifeq ($(BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_BZ2),y)
 GST1_PLUGINS_BAD_CONF_OPT += --enable-bz2
 GST1_PLUGINS_BAD_DEPENDENCIES += bzip2

package/gstreamer1/gst1-plugins-base/gst1-plugins-base.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-GST1_PLUGINS_BASE_VERSION = 1.2.2
+GST1_PLUGINS_BASE_VERSION = 1.2.3
 GST1_PLUGINS_BASE_SOURCE = gst-plugins-base-$(GST1_PLUGINS_BASE_VERSION).tar.xz
 GST1_PLUGINS_BASE_SITE = http://gstreamer.freedesktop.org/src/gst-plugins-base
 GST1_PLUGINS_BASE_INSTALL_STAGING = YES

package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-GST1_PLUGINS_GOOD_VERSION = 1.2.2
+GST1_PLUGINS_GOOD_VERSION = 1.2.3
 GST1_PLUGINS_GOOD_SOURCE = gst-plugins-good-$(GST1_PLUGINS_GOOD_VERSION).tar.xz
 GST1_PLUGINS_GOOD_SITE = http://gstreamer.freedesktop.org/src/gst-plugins-good
 GST1_PLUGINS_GOOD_LICENSE_FILES = COPYING

package/gstreamer1/gst1-plugins-ugly/gst1-plugins-ugly.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-GST1_PLUGINS_UGLY_VERSION = 1.2.2
+GST1_PLUGINS_UGLY_VERSION = 1.2.3
 GST1_PLUGINS_UGLY_SOURCE = gst-plugins-ugly-$(GST1_PLUGINS_UGLY_VERSION).tar.xz
 GST1_PLUGINS_UGLY_SITE = http://gstreamer.freedesktop.org/src/gst-plugins-ugly
 GST1_PLUGINS_UGLY_LICENSE_FILES = COPYING

package/gstreamer1/gstreamer1/gstreamer1.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-GSTREAMER1_VERSION = 1.2.2
+GSTREAMER1_VERSION = 1.2.3
 GSTREAMER1_SOURCE = gstreamer-$(GSTREAMER1_VERSION).tar.xz
 GSTREAMER1_SITE = http://gstreamer.freedesktop.org/src/gstreamer
 GSTREAMER1_INSTALL_STAGING = YES

package/intltool/intltool.mk

@@ -9,7 +9,7 @@ INTLTOOL_SITE = https://launchpad.net/intltool/trunk/$(INTLTOOL_VERSION)/+downlo
 INTLTOOL_LICENSE = GPLv2+
 INTLTOOL_LICENSE_FILES = COPYING
 
-HOST_INTLTOOL_DEPENDENCIES = host-gettext host-libxml-parser-perl
+HOST_INTLTOOL_DEPENDENCIES = host-gettext host-perl-xml-parser
 
 $(eval $(autotools-package))
 $(eval $(host-autotools-package))

package/jansson/jansson.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-JANSSON_VERSION = 2.5
+JANSSON_VERSION = 2.6
 JANSSON_SITE = http://www.digip.org/jansson/releases
 JANSSON_LICENSE = MIT
 JANSSON_LICENSE_FILES = LICENSE

package/libatasmart/Config.in

@@ -1,6 +1,6 @@
 config BR2_PACKAGE_LIBATASMART
 	bool "libatasmart"
-	depends on BR2_PACKAGE_UDEV # libudev is configure dependency
+	depends on BR2_PACKAGE_HAS_UDEV # libudev is configure dependency
 	help
 	  The libatasmart package is a disk reporting library.
 	  It only supports a subset of the ATA S.M.A.R.T. functionality.
@@ -8,4 +8,4 @@ config BR2_PACKAGE_LIBATASMART
 	  http://www.linuxfromscratch.org/blfs/view/svn/general/libatasmart.html
 
 comment "libatasmart requires udev to be enabled"
-	depends on !BR2_PACKAGE_UDEV
+	depends on !BR2_PACKAGE_HAS_UDEV

package/libatomic_ops/libatomic_ops-nothread-build-failure-fix.patch

@@ -1,41 +0,0 @@
-From 7e940ce34ff4de254d460344f1a1a486a14fb045 Mon Sep 17 00:00:00 2001
-From: Gilles Talis <gilles.talis@gmail.com>
-Date: Wed, 22 May 2013 16:21:26 -0700
-Subject: [PATCH] Fix build failure seen when using toolchain without threads support
-
-Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
----
- src/atomic_ops.c |    4 ++++
- 1 files changed, 4 insertions(+), 0 deletions(-)
-
-diff --git a/src/atomic_ops.c b/src/atomic_ops.c
-index b6731a2..5769643 100644
---- a/src/atomic_ops.c
-+++ b/src/atomic_ops.c
-@@ -48,7 +48,9 @@
- 
- #undef AO_REQUIRE_CAS
- 
-+#if defined(AO_USE_PTHREAD_DEFS)
- #include <pthread.h>
-+#endif
- 
- #ifndef AO_USE_NO_SIGNALS
- # include <signal.h>
-@@ -72,11 +74,13 @@
- # include "atomic_ops/sysdeps/standard_ao_double_t.h"
- #endif
- 
-+#if defined(AO_USE_PTHREAD_DEFS)
- /*
-  * Lock for pthreads-based implementation.
-  */
- 
- pthread_mutex_t AO_pt_lock = PTHREAD_MUTEX_INITIALIZER;
-+#endif
- 
- /*
-  * Out of line compare-and-swap emulation based on test and set.
--- 
-1.7.4.1
-

package/libatomic_ops/libatomic_ops.mk

@@ -4,8 +4,9 @@
 #
 ################################################################################
 
-LIBATOMIC_OPS_VERSION = 7.2
-LIBATOMIC_OPS_SITE = http://www.hpl.hp.com/research/linux/atomic_ops/download
+LIBATOMIC_OPS_VERSION = libatomic_ops-7_4_0
+LIBATOMIC_OPS_SITE = $(call github,ivmai,libatomic_ops,$(LIBATOMIC_OPS_VERSION))
+LIBATOMIC_OPS_AUTORECONF = YES
 
 # From doc/LICENSING.txt: "Our intent is to make it easy to use
 # libatomic_ops, in both free and proprietary software.  Hence most
@@ -14,7 +15,7 @@ LIBATOMIC_OPS_SITE = http://www.hpl.hp.com/research/linux/atomic_ops/download
 # by the GNU General Public License. These are put into a separate
 # library, libatomic_ops_gpl.a."
 LIBATOMIC_OPS_LICENSE = MIT (main library) / GPLv2+ (gpl extension)
-LIBATOMIC_OPS_LICENSE_FILES = doc/LICENSING.txt doc/COPYING
+LIBATOMIC_OPS_LICENSE_FILES = doc/LICENSING.txt COPYING
 
 LIBATOMIC_OPS_INSTALL_STAGING = YES
 

package/libcec/libcec.mk

@@ -18,7 +18,7 @@ ifeq ($(BR2_PACKAGE_LOCKDEV),y)
 LIBCEC_DEPENDENCIES += lockdev
 endif
 
-ifeq ($(BR2_PACKAGE_UDEV),y)
+ifeq ($(BR2_PACKAGE_HAS_UDEV),y)
 LIBCEC_DEPENDENCIES += udev
 endif
 

package/libdrm/libdrm.mk

@@ -65,7 +65,7 @@ else
 LIBDRM_CONF_OPT += --disable-freedreno-experimental-api
 endif
 
-ifeq ($(BR2_PACKAGE_UDEV),y)
+ifeq ($(BR2_PACKAGE_HAS_UDEV),y)
 LIBDRM_CONF_OPT += --enable-udev
 LIBDRM_DEPENDENCIES += udev
 else

package/libfslcodec/libfslcodec.mk

@@ -4,9 +4,8 @@
 #
 ################################################################################
 
-LIBFSLCODEC_VERSION = 3.0.1
-# No official download site from freescale, just this mirror
-LIBFSLCODEC_SITE = http://download.ossystems.com.br/bsp/freescale/source
+LIBFSLCODEC_VERSION = $(FREESCALE_IMX_VERSION)
+LIBFSLCODEC_SITE = $(FREESCALE_IMX_SITE)
 LIBFSLCODEC_SOURCE = libfslcodec-$(LIBFSLCODEC_VERSION).bin
 LIBFSLCODEC_LICENSE = Freescale Semiconductor Software License Agreement, BSD-3c (flac, ogg headers)
 LIBFSLCODEC_LICENSE_FILES = EULA EULA.txt

package/libfslparser/libfslparser.mk

@@ -4,9 +4,8 @@
 #
 ################################################################################
 
-LIBFSLPARSER_VERSION = 3.0.1
-# No official download site from freescale, just this mirror
-LIBFSLPARSER_SITE = http://download.ossystems.com.br/bsp/freescale/source
+LIBFSLPARSER_VERSION = $(FREESCALE_IMX_VERSION)
+LIBFSLPARSER_SITE = $(FREESCALE_IMX_SITE)
 LIBFSLPARSER_SOURCE = libfslparser-$(LIBFSLPARSER_VERSION).bin
 LIBFSLPARSER_LICENSE = Freescale Semiconductor Software License Agreement
 LIBFSLPARSER_LICENSE_FILES = EULA EULA.txt
@@ -37,4 +36,7 @@ endef
 # The Makefile installs several versions of the libraries, but we only
 # need one of them, depending on the platform.
 
+# without AUTORECONF, configure fails to find install-sh.
+LIBFSLPARSER_AUTORECONF = YES
+
 $(eval $(autotools-package))

package/libfslvpuwrap/libfslvpuwrap.mk

@@ -4,15 +4,33 @@
 #
 ################################################################################
 
-LIBFSLVPUWRAP_VERSION = 1.0.17
-# No official download site from freescale, just this mirror
-LIBFSLVPUWRAP_SITE = http://download.ossystems.com.br/bsp/freescale/source
+LIBFSLVPUWRAP_VERSION = $(FREESCALE_IMX_VERSION)
+LIBFSLVPUWRAP_SITE = $(FREESCALE_IMX_SITE)
+LIBFSLVPUWRAP_SOURCE = libfslvpuwrap-$(LIBFSLVPUWRAP_VERSION).bin
 LIBFSLVPUWRAP_LICENSE = Freescale Semiconductor Software License Agreement
-LIBFSLVPUWRAP_LICENSE_FILES = EULA.txt
+# N.B.: the content of the two license files is different
+LIBFSLVPUWRAP_LICENSE_FILES = EULA EULA.txt
 LIBFSLVPUWRAP_REDISTRIBUTE = NO
 
 LIBFSLVPUWRAP_INSTALL_STAGING = YES
 
 LIBFSLVPUWRAP_DEPENDENCIES += imx-lib
 
+# The archive is a shell-self-extractor of a bzipped tar. It happens
+# to extract in the correct directory (libfslvpuwrap-x.y.z)
+# The --force makes sure it doesn't fail if the source dir already exists.
+# The --auto-accept skips the license check - not needed for us
+# because we have legal-info
+# Since the EULA in the bin file differs from the one in the tar file,
+# extract the one from the bin file as well.
+define LIBFSLVPUWRAP_EXTRACT_CMDS
+	awk 'BEGIN      { start=0; } \
+	     /^EOEULA/  { start = 0; } \
+	                { if (start) print; } \
+	     /<<EOEULA/ { start=1; }'\
+	    $(DL_DIR)/$(LIBFSLVPUWRAP_SOURCE) > $(@D)/EULA
+	cd $(BUILD_DIR); \
+	sh $(DL_DIR)/$(LIBFSLVPUWRAP_SOURCE) --force --auto-accept
+endef
+
 $(eval $(autotools-package))

package/libmbim/Config.in

@@ -2,9 +2,8 @@ config BR2_PACKAGE_LIBMBIM
 	bool "libmbim"
 	depends on BR2_USE_WCHAR # libglib2
 	depends on BR2_TOOLCHAIN_HAS_THREADS # libglib2
-	depends on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
+	depends on BR2_PACKAGE_HAS_UDEV
 	select BR2_PACKAGE_LIBGLIB2
-	select BR2_PACKAGE_UDEV_ALL_EXTRAS
 	help
 	  libmbim is a glib-based library for talking to WWAN modems and
 	  devices which speak the Mobile Interface Broadband Model (MBIM)
@@ -14,4 +13,4 @@ config BR2_PACKAGE_LIBMBIM
 
 comment "libmbim needs udev /dev management and a toolchain w/ wchar, threads"
 	depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || \
-		!BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
+		!BR2_PACKAGE_HAS_UDEV

package/libpng/libpng.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-LIBPNG_VERSION = 1.6.8
+LIBPNG_VERSION = 1.6.9
 LIBPNG_SERIES = 16
 LIBPNG_SOURCE = libpng-$(LIBPNG_VERSION).tar.xz
 LIBPNG_SITE = http://downloads.sourceforge.net/project/libpng/libpng${LIBPNG_SERIES}/$(LIBPNG_VERSION)

package/libtpl/libtpl.mk

@@ -11,7 +11,6 @@ LIBTPL_LICENSE = BSD-like
 LIBTPL_LICENSE_FILES = LICENSE
 
 LIBTPL_AUTORECONF = YES
-LIBTPL_AUTORECONF_OPT = --install --force
 
 define LIBTPL_CREATE_MISSING_FILES
 	touch $(@D)/NEWS $(@D)/AUTHORS $(@D)/ChangeLog $(@D)/COPYING

package/libusb/libusb.mk

@@ -21,7 +21,7 @@ ifeq ($(BR2_avr32),y)
 LIBUSB_CONF_OPT += --disable-timerfd
 endif
 
-ifeq ($(BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV),y)
+ifeq ($(BR2_PACKAGE_HAS_UDEV),y)
 LIBUSB_DEPENDENCIES += udev
 else
 LIBUSB_CONF_OPT += --disable-udev

package/libxml-parser-perl/Config.in

@@ -1,10 +0,0 @@
-config BR2_PACKAGE_LIBXML_PARSER_PERL
-	bool "libxml-parser-perl"
-	select BR2_PACKAGE_EXPAT
-	# Hide from configuration as we only support the host package
-	# for the moment
-	depends on BR2_HOST_ONLY
-	help
-	  The Perl XML::Parser module.
-
-	  http://www.cpan.org/modules/by-module/XML/

package/libxml-parser-perl/libxml-parser-perl.mk

@@ -1,35 +0,0 @@
-################################################################################
-#
-# libxml-parser-perl
-#
-################################################################################
-
-LIBXML_PARSER_PERL_VERSION = 2.36
-LIBXML_PARSER_PERL_SOURCE = XML-Parser-$(LIBXML_PARSER_PERL_VERSION).tar.gz
-LIBXML_PARSER_PERL_SITE = http://www.cpan.org/modules/by-module/XML/
-
-LIBXML_PARSER_PERL_DEPENDENCIES = expat
-
-define HOST_LIBXML_PARSER_PERL_CONFIGURE_CMDS
- (cd $(@D) ; \
-   $(HOST_CONFIGURE_OPTS) perl Makefile.PL \
-        PREFIX=$(HOST_DIR)/usr \
-        EXPATLIBPATH=$(HOST_DIR)/usr/lib \
-        EXPATINCPATH=$(HOST_DIR)/usr/include \
-        INSTALLDIRS=site \
-        INSTALLSITELIB=$(HOST_DIR)/usr/lib/perl \
-        INSTALLSITEARCH=$(HOST_DIR)/usr/lib/perl \
-        USE_MM_LD_RUN_PATH=1 \
- )
-endef
-
-define HOST_LIBXML_PARSER_PERL_BUILD_CMDS
- $(HOST_MAKE_ENV) $(MAKE) -C $(@D)
-endef
-
-define HOST_LIBXML_PARSER_PERL_INSTALL_CMDS
- $(HOST_MAKE_ENV) $(MAKE) -C $(@D) install
-endef
-
-$(eval $(generic-package))
-$(eval $(host-generic-package))

package/linux-headers/linux-headers.mk

@@ -17,6 +17,9 @@ LINUX_HEADERS_SOURCE = linux-$(LINUX_HEADERS_VERSION).tar.xz
 
 LINUX_HEADERS_INSTALL_STAGING = YES
 
+# linux-headers is part of the toolchain so disable the toolchain dependency
+LINUX_HEADERS_ADD_TOOLCHAIN_DEPENDENCY = NO
+
 define LINUX_HEADERS_INSTALL_STAGING_CMDS
 	(cd $(@D); \
 		$(TARGET_MAKE_ENV) $(MAKE) \

package/ltp-testsuite/ltp-testsuite.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-LTP_TESTSUITE_VERSION = 20130904
+LTP_TESTSUITE_VERSION = 20140115
 LTP_TESTSUITE_SOURCE  = ltp-full-$(LTP_TESTSUITE_VERSION).tar.xz
 LTP_TESTSUITE_SITE    = http://downloads.sourceforge.net/project/ltp/LTP%20Source/ltp-$(LTP_TESTSUITE_VERSION)
 LTP_TESTSUITE_LICENSE = GPLv2 GPLv2+

package/luainterpreter/luainterpreter.mk

@@ -9,4 +9,10 @@ LUAINTERPRETER_DEPENDENCIES = $(call qstrip,$(BR2_PACKAGE_PROVIDES_LUA_INTERPRET
 
 LUAINTERPRETER_ABIVER = $(call qstrip,$(BR2_PACKAGE_LUAINTERPRETER_ABI_VERSION))
 
+ifeq ($(BR2_PACKAGE_HAS_LUA_INTERPRETER),y)
+ifeq ($(LUAINTERPRETER_DEPENDENCIES),)
+$(error No lua interpreter implementation selected. Configuration error.)
+endif
+endif
+
 $(eval $(generic-package))

package/metacity/metacity.mk

@@ -19,7 +19,7 @@ METACITY_CONF_OPT = --x-includes=$(STAGING_DIR)/usr/include/X11 \
 
 METACITY_DEPENDENCIES = libgtk2 \
 	xlib_libX11 \
-	host-libxml-parser-perl \
+	host-perl-xml-parser \
 	xlib_libXcomposite \
 	xlib_libXfixes \
 	xlib_libXrender \

package/modem-manager/Config.in

@@ -1,6 +1,6 @@
 config BR2_PACKAGE_MODEM_MANAGER
 	bool "modemmanager"
-	depends on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
+	depends on BR2_PACKAGE_HAS_UDEV
 	select BR2_PACKAGE_DBUS
 	depends on BR2_INET_IPV6
 	depends on BR2_LARGEFILE # acl
@@ -8,8 +8,6 @@ config BR2_PACKAGE_MODEM_MANAGER
 	depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, libglib2
 	depends on BR2_USE_MMU # dbus
 	select BR2_PACKAGE_DBUS_GLIB
-	select BR2_PACKAGE_UDEV
-	select BR2_PACKAGE_UDEV_ALL_EXTRAS
 	help
 	  ModemManager is a DBus-activated daemon which controls mobile
 	  broadband (2G/3G/4G) devices and connections.
@@ -33,4 +31,4 @@ endif
 
 comment "modemmanager needs udev /dev management and a toolchain w/ largefile, wchar, threads, IPv6"
 	depends on !BR2_INET_IPV6 || !BR2_LARGEFILE || !BR2_USE_WCHAR || \
-		!BR2_TOOLCHAIN_HAS_THREADS || !BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
+		!BR2_TOOLCHAIN_HAS_THREADS || !BR2_PACKAGE_HAS_UDEV

package/monit/monit.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-MONIT_VERSION = 5.6
+MONIT_VERSION = 5.7
 MONIT_SITE = http://mmonit.com/monit/dist/
 MONIT_LICENSE = AGPLv3 with OpenSSL exception
 MONIT_LICENSE_FILES = COPYING

package/network-manager/Config.in

@@ -1,16 +1,14 @@
 config BR2_PACKAGE_NETWORK_MANAGER
 	bool "NetworkManager"
 	depends on !BR2_avr32 # udev
-	depends on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
-	select BR2_PACKAGE_DBUS
 	depends on BR2_INET_IPV6
 	depends on BR2_LARGEFILE # acl
 	depends on BR2_USE_WCHAR # libglib2 and gnutls
 	depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, libglib2
 	depends on BR2_USE_MMU # dbus
+	depends on BR2_PACKAGE_HAS_UDEV
+	select BR2_PACKAGE_DBUS
 	select BR2_PACKAGE_DBUS_GLIB
-	select BR2_PACKAGE_UDEV
-	select BR2_PACKAGE_UDEV_ALL_EXTRAS
 	select BR2_PACKAGE_GNUTLS
 	select BR2_PACKAGE_LIBGCRYPT
 	select BR2_PACKAGE_LIBNL
@@ -33,4 +31,4 @@ comment "NetworkManager needs udev /dev management and a toolchain w/ IPv6, larg
 	depends on BR2_USE_MMU
 	depends on !BR2_INET_IPV6 || !BR2_LARGEFILE || !BR2_USE_WCHAR || \
 		!BR2_TOOLCHAIN_HAS_THREADS || \
-		!BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
+		!BR2_PACKAGE_HAS_UDEV

package/ofono/ofono.mk

@@ -22,7 +22,7 @@ OFONO_CONF_OPT = --disable-test
 # make sure that it is defined.
 OFONO_CONF_ENV += CFLAGS="$(TARGET_CFLAGS) -D_GNU_SOURCE"
 
-ifeq ($(BR2_PACKAGE_UDEV),y)
+ifeq ($(BR2_PACKAGE_HAS_UDEV),y)
 	OFONO_CONF_OPT += --enable-udev
 	OFONO_DEPENDENCIES += udev
 else

package/opengl/libegl/libegl.mk

@@ -7,11 +7,10 @@
 LIBEGL_SOURCE =
 LIBEGL_DEPENDENCIES = $(call qstrip,$(BR2_PACKAGE_PROVIDES_OPENGL_EGL))
 
+ifeq ($(BR2_PACKAGE_HAS_OPENGL_EGL),y)
 ifeq ($(LIBEGL_DEPENDENCIES),)
-define LIBEGL_CONFIGURE_CMDS
-	echo "No libEGL implementation selected. Configuration error."
-	exit 1
-endef
+$(error No libEGL implementation selected. Configuration error.)
+endif
 endif
 
 $(eval $(generic-package))

package/opengl/libgles/libgles.mk

@@ -7,11 +7,10 @@
 LIBGLES_SOURCE =
 LIBGLES_DEPENDENCIES = $(call qstrip,$(BR2_PACKAGE_PROVIDES_OPENGL_ES))
 
+ifeq ($(BR2_PACKAGE_HAS_OPENGL_ES),y)
 ifeq ($(LIBGLES_DEPENDENCIES),)
-define LIBGLES_CONFIGURE_CMDS
-	echo "No libGLES implementation selected. Configuration error."
-	exit 1
-endef
+$(error No libGLES implementation selected. Configuration error.)
+endif
 endif
 
 $(eval $(generic-package))

package/opengl/libopenmax/libopenmax.mk

@@ -7,11 +7,10 @@
 LIBOPENMAX_SOURCE =
 LIBOPENMAX_DEPENDENCIES = $(call qstrip,$(BR2_PACKAGE_PROVIDES_OPENMAX))
 
+ifeq ($(BR2_PACKAGE_HAS_OPENMAX),y)
 ifeq ($(LIBOPENMAX_DEPENDENCIES),)
-define LIBOPENMAX_CONFIGURE_CMDS
-	echo "No libopenmax implementation selected. Configuration error."
-	exit 1
-endef
+$(error No libopenmax implementation selected. Configuration error.)
+endif
 endif
 
 $(eval $(generic-package))

package/opengl/libopenvg/libopenvg.mk

@@ -7,11 +7,10 @@
 LIBOPENVG_SOURCE =
 LIBOPENVG_DEPENDENCIES = $(call qstrip,$(BR2_PACKAGE_PROVIDES_OPENVG))
 
+ifeq ($(BR2_PACKAGE_HAS_OPENVG),y)
 ifeq ($(LIBOPENVG_DEPENDENCIES),)
-define LIBOPENVG_CONFIGURE_CMDS
-	echo "No libOpenVG implementation selected. Configuration error."
-	exit 1
-endef
+$(error No libOpenVG implementation selected. Configuration error.)
+endif
 endif
 
 $(eval $(generic-package))

package/opentyrian-data/Config.in

@@ -0,0 +1,9 @@
+config BR2_PACKAGE_OPENTYRIAN_DATA
+	bool "OpenTyrian data"
+	depends on BR2_PACKAGE_OPENTYRIAN
+	help
+	  Data files to use with OpenTyrian game. Currently only the original
+	  Tyrian 2.1 data files, that have been released as Freeware in 2004,
+	  are compatible.
+
+	  http://code.google.com/p/opentyrian/wiki/FAQ

package/opentyrian-data/opentyrian-data.mk

@@ -0,0 +1,23 @@
+###############################################################################
+#
+# opentyrian-data
+#
+###############################################################################
+
+OPENTYRIAN_DATA_VERSION = 2.1
+OPENTYRIAN_DATA_SITE = http://www.camanis.net/opentyrian/
+OPENTYRIAN_DATA_SOURCE = tyrian21.zip
+OPENTYRIAN_DATA_LICENSE = Freeware
+
+define OPENTYRIAN_DATA_EXTRACT_CMDS
+	unzip -d $(@D) $(DL_DIR)/$(OPENTYRIAN_DATA_SOURCE)
+endef
+
+define OPENTYRIAN_DATA_INSTALL_TARGET_CMDS
+	mkdir -p $(TARGET_DIR)/usr/share/opentyrian/data/
+	cp $(@D)/tyrian21/* $(TARGET_DIR)/usr/share/opentyrian/data/
+	rm -f $(TARGET_DIR)/usr/share/opentyrian/data/*.doc
+	rm -f $(TARGET_DIR)/usr/share/opentyrian/data/*.exe
+endef
+
+$(eval $(generic-package))

package/opentyrian/Config.in

@@ -0,0 +1,24 @@
+config BR2_PACKAGE_OPENTYRIAN
+	bool "OpenTyrian"
+	select BR2_PACKAGE_SDL
+	select BR2_PACKAGE_OPENTYRIAN_DATA
+	help
+	  OpenTyrian is a port of the DOS shoot-em-up Tyrian. It uses SDL,
+	  making it easily cross-platform.
+	  It requires the original data files to run.
+	  A display with minimum 640x480 resolution and a keyboard are needed
+	  to play the game.
+	  If you want some sound, activate ALSA with OSS emulation.
+
+	  http://code.google.com/p/opentyrian/
+
+if BR2_PACKAGE_OPENTYRIAN
+
+config BR2_PACKAGE_OPENTYRIAN_NET
+	bool "network support"
+	default y
+	select BR2_PACKAGE_SDL_NET
+	help
+	  Activates network support in OpenTyrian. Will add SDL_net.
+
+endif

package/opentyrian/opentyrian.mk

@@ -0,0 +1,36 @@
+###############################################################################
+#
+# opentyrian
+#
+###############################################################################
+
+OPENTYRIAN_VERSION = 2.1.20130907
+OPENTYRIAN_SITE = http://www.camanis.net/opentyrian/releases/
+OPENTYRIAN_SOURCE = opentyrian-$(OPENTYRIAN_VERSION)-src.tar.gz
+OPENTYRIAN_LICENSE = GPLv2+
+OPENTYRIAN_LICENSE_FILES = COPYING
+
+OPENTYRIAN_DEPENDENCIES = sdl
+
+ifeq ($(BR2_PACKAGE_OPENTYRIAN_NET),y)
+OPENTYRIAN_DEPENDENCIES += sdl_net
+OPENTYRIAN_NETWORK = true
+else
+OPENTYRIAN_NETWORK = false
+endif
+
+define OPENTYRIAN_BUILD_CMDS
+        $(MAKE) PLATFORM=UNIX \
+		CC="$(TARGET_CC)" \
+		STRIP="/bin/true" \
+		SDL_CONFIG="$(STAGING_DIR)/usr/bin/sdl-config" \
+		LDFLAGS="-lm" \
+		WITH_NETWORK="$(OPENTYRIAN_NETWORK)" \
+		-C $(@D) release
+endef
+
+define OPENTYRIAN_INSTALL_TARGET_CMDS
+	$(INSTALL) -D -m 0755 $(@D)/opentyrian $(TARGET_DIR)/usr/bin/opentyrian
+endef
+
+$(eval $(generic-package))

package/pcsc-lite/Config.in

@@ -11,7 +11,7 @@ if BR2_PACKAGE_PCSC_LITE
 
 config BR2_PACKAGE_PCSC_LITE_FORCE_LIBUSB
 	bool "use libusb"
-	depends on !BR2_PACKAGE_UDEV
+	depends on !BR2_PACKAGE_HAS_UDEV
 	select BR2_PACKAGE_LIBUSB
 	help
 	  Select Y if you want to support usb smart card readers.

package/pcsc-lite/pcsc-lite.mk

@@ -16,7 +16,7 @@ PCSC_LITE_LICENSE_FILES = COPYING
 # - libudev and libusb can't be used together
 # - libudev has a priority over libusb
 
-ifeq ($(BR2_PACKAGE_UDEV),y)
+ifeq ($(BR2_PACKAGE_HAS_UDEV),y)
 PCSC_LITE_CONF_OPT += --enable-libudev --disable-libusb
 PCSC_LITE_DEPENDENCIES += udev
 else

package/perl-module-build/perl-module-build.mk

@@ -0,0 +1,12 @@
+################################################################################
+#
+# perl-module-build
+#
+################################################################################
+
+PERL_MODULE_BUILD_VERSION = 0.4204
+PERL_MODULE_BUILD_SOURCE = Module-Build-$(PERL_MODULE_BUILD_VERSION).tar.gz
+PERL_MODULE_BUILD_SITE = $(BR2_CPAN_MIRROR)/authors/id/L/LE/LEONT/
+PERL_MODULE_BUILD_LICENSE = Artistic or GPLv1+
+
+$(eval $(host-perl-package))

package/perl-xml-parser/perl-xml-parser.mk

@@ -0,0 +1,17 @@
+################################################################################
+#
+# perl-xml-parser
+#
+################################################################################
+
+PERL_XML_PARSER_VERSION = 2.41
+PERL_XML_PARSER_SOURCE = XML-Parser-$(PERL_XML_PARSER_VERSION).tar.gz
+PERL_XML_PARSER_SITE = $(BR2_CPAN_MIRROR)/authors/id/T/TO/TODDR/
+PERL_XML_PARSER_DEPENDENCIES = expat
+PERL_XML_PARSER_LICENSE = Artistic or GPLv1+
+
+HOST_LIBXML_PARSER_PERL_CONF_OPT = \
+	EXPATLIBPATH=$(HOST_DIR)/usr/lib \
+	EXPATINCPATH=$(HOST_DIR)/usr/include
+
+$(eval $(host-perl-package))

package/perl/perl.mk

@@ -90,10 +90,8 @@ define PERL_INSTALL_STAGING_CMDS
 	$(MAKE1) -C $(@D) DESTDIR="$(STAGING_DIR)" install.perl
 endef
 
-PERL_INSTALL_TARGET_GOALS = install.perl
-
 define PERL_INSTALL_TARGET_CMDS
-	$(MAKE1) -C $(@D) DESTDIR="$(TARGET_DIR)" $(PERL_INSTALL_TARGET_GOALS)
+	$(MAKE1) -C $(@D) DESTDIR="$(TARGET_DIR)" install.perl
 endef
 
 $(eval $(generic-package))

package/php-gnupg/Config.in

@@ -0,0 +1,9 @@
+config BR2_PACKAGE_PHP_GNUPG
+	bool "php-gnupg"
+	depends on BR2_PACKAGE_PHP
+	depends on BR2_USE_MMU # libassuan
+	select BR2_PACKAGE_LIBGPGME
+	help
+	  PHP wrapper around the gpgme library.
+
+	  http://pecl.php.net/package/gnupg

package/php-gnupg/php-gnupg.mk

@@ -0,0 +1,23 @@
+################################################################################
+#
+# php-gnupg
+#
+################################################################################
+
+PHP_GNUPG_VERSION = 1.3.3
+PHP_GNUPG_SOURCE = gnupg-$(PHP_GNUPG_VERSION).tgz
+PHP_GNUPG_SITE = http://pecl.php.net/get
+# phpize does the autoconf magic
+PHP_GNUPG_DEPENDENCIES = php libgpgme host-autoconf host-pkgconf
+PHP_GNUPG_CONF_OPT = --with-php-config=$(STAGING_DIR)/usr/bin/php-config
+PHP_GNUPG_LICENSE = BSD-2c
+PHP_GNUPG_LICENSE_FILES = LICENSE
+
+define PHP_GNUPG_PHPIZE
+	(cd $(@D); \
+		$(STAGING_DIR)/usr/bin/phpize)
+endef
+
+PHP_GNUPG_PRE_CONFIGURE_HOOKS += PHP_GNUPG_PHPIZE
+
+$(eval $(autotools-package))

package/php-imagick/Config.in

@@ -0,0 +1,8 @@
+config BR2_PACKAGE_PHP_IMAGICK
+	bool "php-imagick"
+	depends on BR2_PACKAGE_PHP
+	select BR2_PACKAGE_IMAGEMAGICK
+	help
+	  PHP wrapper to the ImageMagick library.
+
+	  http://pecl.php.net/package/imagick

package/php-imagick/php-imagick.mk

@@ -0,0 +1,26 @@
+################################################################################
+#
+# php-imagick
+#
+################################################################################
+
+PHP_IMAGICK_VERSION = 3.1.2
+PHP_IMAGICK_SOURCE = imagick-$(PHP_IMAGICK_VERSION).tgz
+PHP_IMAGICK_SITE = http://pecl.php.net/get
+PHP_IMAGICK_CONF_OPT = --with-php-config=$(STAGING_DIR)/usr/bin/php-config \
+	--with-imagick=$(STAGING_DIR)/usr
+# phpize does the autoconf magic
+PHP_IMAGICK_DEPENDENCIES = imagemagick php host-autoconf
+PHP_IMAGICK_LICENSE = PHP
+PHP_IMAGICK_LICENSE_FILES = LICENSE
+
+define PHP_IMAGICK_PHPIZE
+	(cd $(@D); \
+		PHP_AUTOCONF=$(HOST_DIR)/usr/bin/autoconf \
+		PHP_AUTOHEADER=$(HOST_DIR)/usr/bin/autoheader \
+		$(STAGING_DIR)/usr/bin/phpize)
+endef
+
+PHP_IMAGICK_PRE_CONFIGURE_HOOKS += PHP_IMAGICK_PHPIZE
+
+$(eval $(autotools-package))

package/php-ssh2/Config.in

@@ -0,0 +1,8 @@
+config BR2_PACKAGE_PHP_SSH2
+	bool "php-ssh2"
+	depends on BR2_PACKAGE_PHP
+	select BR2_PACKAGE_LIBSSH2
+	help
+	  PHP bindings for the libssh2 library.
+
+	  http://pecl.php.net/package/ssh2